1 /* 2 * linux/arch/arm/mach-omap1/clock.h 3 * 4 * Copyright (C) 2004 - 2005, 2009 Nokia corporation 5 * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> 6 * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License version 2 as 10 * published by the Free Software Foundation. 11 */ 12 13 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H 14 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H 15 16 #include <linux/clk.h> 17 #include <linux/list.h> 18 19 #include <linux/clkdev.h> 20 21 struct module; 22 struct clk; 23 24 struct omap_clk { 25 u16 cpu; 26 struct clk_lookup lk; 27 }; 28 29 #define CLK(dev, con, ck, cp) \ 30 { \ 31 .cpu = cp, \ 32 .lk = { \ 33 .dev_id = dev, \ 34 .con_id = con, \ 35 .clk = ck, \ 36 }, \ 37 } 38 39 /* Platform flags for the clkdev-OMAP integration code */ 40 #define CK_310 (1 << 0) 41 #define CK_7XX (1 << 1) /* 7xx, 850 */ 42 #define CK_1510 (1 << 2) 43 #define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */ 44 #define CK_1710 (1 << 4) /* 1710 extra for rate selection */ 45 46 47 /* Temporary, needed during the common clock framework conversion */ 48 #define __clk_get_name(clk) (clk->name) 49 #define __clk_get_parent(clk) (clk->parent) 50 #define __clk_get_rate(clk) (clk->rate) 51 52 /** 53 * struct clkops - some clock function pointers 54 * @enable: fn ptr that enables the current clock in hardware 55 * @disable: fn ptr that enables the current clock in hardware 56 * @find_idlest: function returning the IDLEST register for the clock's IP blk 57 * @find_companion: function returning the "companion" clk reg for the clock 58 * @allow_idle: fn ptr that enables autoidle for the current clock in hardware 59 * @deny_idle: fn ptr that disables autoidle for the current clock in hardware 60 * 61 * A "companion" clk is an accompanying clock to the one being queried 62 * that must be enabled for the IP module connected to the clock to 63 * become accessible by the hardware. Neither @find_idlest nor 64 * @find_companion should be needed; that information is IP 65 * block-specific; the hwmod code has been created to handle this, but 66 * until hwmod data is ready and drivers have been converted to use PM 67 * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and 68 * @find_companion must, unfortunately, remain. 69 */ 70 struct clkops { 71 int (*enable)(struct clk *); 72 void (*disable)(struct clk *); 73 void (*find_idlest)(struct clk *, void __iomem **, 74 u8 *, u8 *); 75 void (*find_companion)(struct clk *, void __iomem **, 76 u8 *); 77 void (*allow_idle)(struct clk *); 78 void (*deny_idle)(struct clk *); 79 }; 80 81 /* 82 * struct clk.flags possibilities 83 * 84 * XXX document the rest of the clock flags here 85 * 86 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL 87 * bits share the same register. This flag allows the 88 * omap4_dpllmx*() code to determine which GATE_CTRL bit field 89 * should be used. This is a temporary solution - a better approach 90 * would be to associate clock type-specific data with the clock, 91 * similar to the struct dpll_data approach. 92 */ 93 #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ 94 #define CLOCK_IDLE_CONTROL (1 << 1) 95 #define CLOCK_NO_IDLE_PARENT (1 << 2) 96 #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ 97 #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ 98 #define CLOCK_CLKOUTX2 (1 << 5) 99 100 /** 101 * struct clk - OMAP struct clk 102 * @node: list_head connecting this clock into the full clock list 103 * @ops: struct clkops * for this clock 104 * @name: the name of the clock in the hardware (used in hwmod data and debug) 105 * @parent: pointer to this clock's parent struct clk 106 * @children: list_head connecting to the child clks' @sibling list_heads 107 * @sibling: list_head connecting this clk to its parent clk's @children 108 * @rate: current clock rate 109 * @enable_reg: register to write to enable the clock (see @enable_bit) 110 * @recalc: fn ptr that returns the clock's current rate 111 * @set_rate: fn ptr that can change the clock's current rate 112 * @round_rate: fn ptr that can round the clock's current rate 113 * @init: fn ptr to do clock-specific initialization 114 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) 115 * @usecount: number of users that have requested this clock to be enabled 116 * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div 117 * @flags: see "struct clk.flags possibilities" above 118 * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) 119 * @src_offset: bitshift for source selection bitfield (OMAP1 only) 120 * 121 * XXX @rate_offset, @src_offset should probably be removed and OMAP1 122 * clock code converted to use clksel. 123 * 124 * XXX @usecount is poorly named. It should be "enable_count" or 125 * something similar. "users" in the description refers to kernel 126 * code (core code or drivers) that have called clk_enable() and not 127 * yet called clk_disable(); the usecount of parent clocks is also 128 * incremented by the clock code when clk_enable() is called on child 129 * clocks and decremented by the clock code when clk_disable() is 130 * called on child clocks. 131 * 132 * XXX @clkdm, @usecount, @children, @sibling should be marked for 133 * internal use only. 134 * 135 * @children and @sibling are used to optimize parent-to-child clock 136 * tree traversals. (child-to-parent traversals use @parent.) 137 * 138 * XXX The notion of the clock's current rate probably needs to be 139 * separated from the clock's target rate. 140 */ 141 struct clk { 142 struct list_head node; 143 const struct clkops *ops; 144 const char *name; 145 struct clk *parent; 146 struct list_head children; 147 struct list_head sibling; /* node for children */ 148 unsigned long rate; 149 void __iomem *enable_reg; 150 unsigned long (*recalc)(struct clk *); 151 int (*set_rate)(struct clk *, unsigned long); 152 long (*round_rate)(struct clk *, unsigned long); 153 void (*init)(struct clk *); 154 u8 enable_bit; 155 s8 usecount; 156 u8 fixed_div; 157 u8 flags; 158 u8 rate_offset; 159 u8 src_offset; 160 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) 161 struct dentry *dent; /* For visible tree hierarchy */ 162 #endif 163 }; 164 165 struct clk_functions { 166 int (*clk_enable)(struct clk *clk); 167 void (*clk_disable)(struct clk *clk); 168 long (*clk_round_rate)(struct clk *clk, unsigned long rate); 169 int (*clk_set_rate)(struct clk *clk, unsigned long rate); 170 int (*clk_set_parent)(struct clk *clk, struct clk *parent); 171 void (*clk_allow_idle)(struct clk *clk); 172 void (*clk_deny_idle)(struct clk *clk); 173 void (*clk_disable_unused)(struct clk *clk); 174 }; 175 176 extern int mpurate; 177 178 extern int clk_init(struct clk_functions *custom_clocks); 179 extern void clk_preinit(struct clk *clk); 180 extern int clk_register(struct clk *clk); 181 extern void clk_reparent(struct clk *child, struct clk *parent); 182 extern void clk_unregister(struct clk *clk); 183 extern void propagate_rate(struct clk *clk); 184 extern void recalculate_root_clocks(void); 185 extern unsigned long followparent_recalc(struct clk *clk); 186 extern void clk_enable_init_clocks(void); 187 unsigned long omap_fixed_divisor_recalc(struct clk *clk); 188 extern struct clk *omap_clk_get_by_name(const char *name); 189 extern int omap_clk_enable_autoidle_all(void); 190 extern int omap_clk_disable_autoidle_all(void); 191 192 extern const struct clkops clkops_null; 193 194 extern struct clk dummy_ck; 195 196 int omap1_clk_init(void); 197 void omap1_clk_late_init(void); 198 extern int omap1_clk_enable(struct clk *clk); 199 extern void omap1_clk_disable(struct clk *clk); 200 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); 201 extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); 202 extern unsigned long omap1_ckctl_recalc(struct clk *clk); 203 extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); 204 extern unsigned long omap1_sossi_recalc(struct clk *clk); 205 extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); 206 extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); 207 extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); 208 extern unsigned long omap1_uart_recalc(struct clk *clk); 209 extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); 210 extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); 211 extern void omap1_init_ext_clk(struct clk *clk); 212 extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); 213 extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); 214 extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); 215 extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); 216 extern unsigned long omap1_watchdog_recalc(struct clk *clk); 217 218 #ifdef CONFIG_OMAP_RESET_CLOCKS 219 extern void omap1_clk_disable_unused(struct clk *clk); 220 #else 221 #define omap1_clk_disable_unused NULL 222 #endif 223 224 struct uart_clk { 225 struct clk clk; 226 unsigned long sysc_addr; 227 }; 228 229 /* Provide a method for preventing idling some ARM IDLECT clocks */ 230 struct arm_idlect1_clk { 231 struct clk clk; 232 unsigned long no_idle_count; 233 __u8 idlect_shift; 234 }; 235 236 /* ARM_CKCTL bit shifts */ 237 #define CKCTL_PERDIV_OFFSET 0 238 #define CKCTL_LCDDIV_OFFSET 2 239 #define CKCTL_ARMDIV_OFFSET 4 240 #define CKCTL_DSPDIV_OFFSET 6 241 #define CKCTL_TCDIV_OFFSET 8 242 #define CKCTL_DSPMMUDIV_OFFSET 10 243 /*#define ARM_TIMXO 12*/ 244 #define EN_DSPCK 13 245 /*#define ARM_INTHCK_SEL 14*/ /* Divide-by-2 for mpu inth_ck */ 246 /* DSP_CKCTL bit shifts */ 247 #define CKCTL_DSPPERDIV_OFFSET 0 248 249 /* ARM_IDLECT2 bit shifts */ 250 #define EN_WDTCK 0 251 #define EN_XORPCK 1 252 #define EN_PERCK 2 253 #define EN_LCDCK 3 254 #define EN_LBCK 4 /* Not on 1610/1710 */ 255 /*#define EN_HSABCK 5*/ 256 #define EN_APICK 6 257 #define EN_TIMCK 7 258 #define DMACK_REQ 8 259 #define EN_GPIOCK 9 /* Not on 1610/1710 */ 260 /*#define EN_LBFREECK 10*/ 261 #define EN_CKOUT_ARM 11 262 263 /* ARM_IDLECT3 bit shifts */ 264 #define EN_OCPI_CK 0 265 #define EN_TC1_CK 2 266 #define EN_TC2_CK 4 267 268 /* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */ 269 #define EN_DSPTIMCK 5 270 271 /* Various register defines for clock controls scattered around OMAP chip */ 272 #define SDW_MCLK_INV_BIT 2 /* In ULPD_CLKC_CTRL */ 273 #define USB_MCLK_EN_BIT 4 /* In ULPD_CLKC_CTRL */ 274 #define USB_HOST_HHC_UHOST_EN 9 /* In MOD_CONF_CTRL_0 */ 275 #define SWD_ULPD_PLL_CLK_REQ 1 /* In SWD_CLK_DIV_CTRL_SEL */ 276 #define COM_ULPD_PLL_CLK_REQ 1 /* In COM_CLK_DIV_CTRL_SEL */ 277 #define SWD_CLK_DIV_CTRL_SEL 0xfffe0874 278 #define COM_CLK_DIV_CTRL_SEL 0xfffe0878 279 #define SOFT_REQ_REG 0xfffe0834 280 #define SOFT_REQ_REG2 0xfffe0880 281 282 extern __u32 arm_idlect1_mask; 283 extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; 284 285 extern const struct clkops clkops_dspck; 286 extern const struct clkops clkops_dummy; 287 extern const struct clkops clkops_uart_16xx; 288 extern const struct clkops clkops_generic; 289 290 /* used for passing SoC type to omap1_{select,round_to}_table_rate() */ 291 extern u32 cpu_mask; 292 293 #endif 294