1 /*
2 * Copyright (C) 1995 Linus Torvalds
3 * Adapted from 'alpha' version by Gary Thomas
4 * Modified by Cort Dougan (cort@cs.nmt.edu)
5 */
6
7 /*
8 * bootup setup stuff..
9 */
10
11 #include <linux/errno.h>
12 #include <linux/sched.h>
13 #include <linux/kernel.h>
14 #include <linux/mm.h>
15 #include <linux/stddef.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/user.h>
19 #include <linux/tty.h>
20 #include <linux/major.h>
21 #include <linux/interrupt.h>
22 #include <linux/reboot.h>
23 #include <linux/init.h>
24 #include <linux/pci.h>
25 #include <generated/utsrelease.h>
26 #include <linux/adb.h>
27 #include <linux/module.h>
28 #include <linux/delay.h>
29 #include <linux/console.h>
30 #include <linux/seq_file.h>
31 #include <linux/root_dev.h>
32 #include <linux/initrd.h>
33 #include <linux/timer.h>
34
35 #include <asm/io.h>
36 #include <asm/pgtable.h>
37 #include <asm/prom.h>
38 #include <asm/pci-bridge.h>
39 #include <asm/dma.h>
40 #include <asm/machdep.h>
41 #include <asm/irq.h>
42 #include <asm/hydra.h>
43 #include <asm/sections.h>
44 #include <asm/time.h>
45 #include <asm/i8259.h>
46 #include <asm/mpic.h>
47 #include <asm/rtas.h>
48 #include <asm/xmon.h>
49
50 #include "chrp.h"
51 #include "gg2.h"
52
53 void rtas_indicator_progress(char *, unsigned short);
54
55 int _chrp_type;
56 EXPORT_SYMBOL(_chrp_type);
57
58 static struct mpic *chrp_mpic;
59
60 /* Used for doing CHRP event-scans */
61 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
62 unsigned long event_scan_interval;
63
64 extern unsigned long loops_per_jiffy;
65
66 /* To be replaced by RTAS when available */
67 static unsigned int __iomem *briq_SPOR;
68
69 #ifdef CONFIG_SMP
70 extern struct smp_ops_t chrp_smp_ops;
71 #endif
72
73 static const char *gg2_memtypes[4] = {
74 "FPM", "SDRAM", "EDO", "BEDO"
75 };
76 static const char *gg2_cachesizes[4] = {
77 "256 KB", "512 KB", "1 MB", "Reserved"
78 };
79 static const char *gg2_cachetypes[4] = {
80 "Asynchronous", "Reserved", "Flow-Through Synchronous",
81 "Pipelined Synchronous"
82 };
83 static const char *gg2_cachemodes[4] = {
84 "Disabled", "Write-Through", "Copy-Back", "Transparent Mode"
85 };
86
87 static const char *chrp_names[] = {
88 "Unknown",
89 "","","",
90 "Motorola",
91 "IBM or Longtrail",
92 "Genesi Pegasos",
93 "Total Impact Briq"
94 };
95
chrp_show_cpuinfo(struct seq_file * m)96 void chrp_show_cpuinfo(struct seq_file *m)
97 {
98 int i, sdramen;
99 unsigned int t;
100 struct device_node *root;
101 const char *model = "";
102
103 root = of_find_node_by_path("/");
104 if (root)
105 model = of_get_property(root, "model", NULL);
106 seq_printf(m, "machine\t\t: CHRP %s\n", model);
107
108 /* longtrail (goldengate) stuff */
109 if (model && !strncmp(model, "IBM,LongTrail", 13)) {
110 /* VLSI VAS96011/12 `Golden Gate 2' */
111 /* Memory banks */
112 sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL)
113 >>31) & 1;
114 for (i = 0; i < (sdramen ? 4 : 6); i++) {
115 t = in_le32(gg2_pci_config_base+
116 GG2_PCI_DRAM_BANK0+
117 i*4);
118 if (!(t & 1))
119 continue;
120 switch ((t>>8) & 0x1f) {
121 case 0x1f:
122 model = "4 MB";
123 break;
124 case 0x1e:
125 model = "8 MB";
126 break;
127 case 0x1c:
128 model = "16 MB";
129 break;
130 case 0x18:
131 model = "32 MB";
132 break;
133 case 0x10:
134 model = "64 MB";
135 break;
136 case 0x00:
137 model = "128 MB";
138 break;
139 default:
140 model = "Reserved";
141 break;
142 }
143 seq_printf(m, "memory bank %d\t: %s %s\n", i, model,
144 gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]);
145 }
146 /* L2 cache */
147 t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL);
148 seq_printf(m, "board l2\t: %s %s (%s)\n",
149 gg2_cachesizes[(t>>7) & 3],
150 gg2_cachetypes[(t>>2) & 3],
151 gg2_cachemodes[t & 3]);
152 }
153 of_node_put(root);
154 }
155
156 /*
157 * Fixes for the National Semiconductor PC78308VUL SuperI/O
158 *
159 * Some versions of Open Firmware incorrectly initialize the IRQ settings
160 * for keyboard and mouse
161 */
sio_write(u8 val,u8 index)162 static inline void __init sio_write(u8 val, u8 index)
163 {
164 outb(index, 0x15c);
165 outb(val, 0x15d);
166 }
167
sio_read(u8 index)168 static inline u8 __init sio_read(u8 index)
169 {
170 outb(index, 0x15c);
171 return inb(0x15d);
172 }
173
sio_fixup_irq(const char * name,u8 device,u8 level,u8 type)174 static void __init sio_fixup_irq(const char *name, u8 device, u8 level,
175 u8 type)
176 {
177 u8 level0, type0, active;
178
179 /* select logical device */
180 sio_write(device, 0x07);
181 active = sio_read(0x30);
182 level0 = sio_read(0x70);
183 type0 = sio_read(0x71);
184 if (level0 != level || type0 != type || !active) {
185 printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
186 "remapping to level %d, type %d, active\n",
187 name, level0, type0, !active ? "in" : "", level, type);
188 sio_write(0x01, 0x30);
189 sio_write(level, 0x70);
190 sio_write(type, 0x71);
191 }
192 }
193
sio_init(void)194 static void __init sio_init(void)
195 {
196 struct device_node *root;
197 const char *model;
198
199 root = of_find_node_by_path("/");
200 if (!root)
201 return;
202
203 model = of_get_property(root, "model", NULL);
204 if (model && !strncmp(model, "IBM,LongTrail", 13)) {
205 /* logical device 0 (KBC/Keyboard) */
206 sio_fixup_irq("keyboard", 0, 1, 2);
207 /* select logical device 1 (KBC/Mouse) */
208 sio_fixup_irq("mouse", 1, 12, 2);
209 }
210
211 of_node_put(root);
212 }
213
214
pegasos_set_l2cr(void)215 static void __init pegasos_set_l2cr(void)
216 {
217 struct device_node *np;
218
219 /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */
220 if (_chrp_type != _CHRP_Pegasos)
221 return;
222
223 /* Enable L2 cache if needed */
224 np = of_find_node_by_type(NULL, "cpu");
225 if (np != NULL) {
226 const unsigned int *l2cr = of_get_property(np, "l2cr", NULL);
227 if (l2cr == NULL) {
228 printk ("Pegasos l2cr : no cpu l2cr property found\n");
229 goto out;
230 }
231 if (!((*l2cr) & 0x80000000)) {
232 printk ("Pegasos l2cr : L2 cache was not active, "
233 "activating\n");
234 _set_L2CR(0);
235 _set_L2CR((*l2cr) | 0x80000000);
236 }
237 }
238 out:
239 of_node_put(np);
240 }
241
briq_restart(char * cmd)242 static void briq_restart(char *cmd)
243 {
244 local_irq_disable();
245 if (briq_SPOR)
246 out_be32(briq_SPOR, 0);
247 for(;;);
248 }
249
250 /*
251 * Per default, input/output-device points to the keyboard/screen
252 * If no card is installed, the built-in serial port is used as a fallback.
253 * But unfortunately, the firmware does not connect /chosen/{stdin,stdout}
254 * the the built-in serial node. Instead, a /failsafe node is created.
255 */
chrp_init_early(void)256 static __init void chrp_init_early(void)
257 {
258 struct device_node *node;
259 const char *property;
260
261 if (strstr(boot_command_line, "console="))
262 return;
263 /* find the boot console from /chosen/stdout */
264 if (!of_chosen)
265 return;
266 node = of_find_node_by_path("/");
267 if (!node)
268 return;
269 property = of_get_property(node, "model", NULL);
270 if (!property)
271 goto out_put;
272 if (strcmp(property, "Pegasos2"))
273 goto out_put;
274 /* this is a Pegasos2 */
275 property = of_get_property(of_chosen, "linux,stdout-path", NULL);
276 if (!property)
277 goto out_put;
278 of_node_put(node);
279 node = of_find_node_by_path(property);
280 if (!node)
281 return;
282 property = of_get_property(node, "device_type", NULL);
283 if (!property)
284 goto out_put;
285 if (strcmp(property, "serial"))
286 goto out_put;
287 /*
288 * The 9pin connector is either /failsafe
289 * or /pci@80000000/isa@C/serial@i2F8
290 * The optional graphics card has also type 'serial' in VGA mode.
291 */
292 property = of_get_property(node, "name", NULL);
293 if (!property)
294 goto out_put;
295 if (!strcmp(property, "failsafe") || !strcmp(property, "serial"))
296 add_preferred_console("ttyS", 0, NULL);
297 out_put:
298 of_node_put(node);
299 }
300
chrp_setup_arch(void)301 void __init chrp_setup_arch(void)
302 {
303 struct device_node *root = of_find_node_by_path("/");
304 const char *machine = NULL;
305
306 /* init to some ~sane value until calibrate_delay() runs */
307 loops_per_jiffy = 50000000/HZ;
308
309 if (root)
310 machine = of_get_property(root, "model", NULL);
311 if (machine && strncmp(machine, "Pegasos", 7) == 0) {
312 _chrp_type = _CHRP_Pegasos;
313 } else if (machine && strncmp(machine, "IBM", 3) == 0) {
314 _chrp_type = _CHRP_IBM;
315 } else if (machine && strncmp(machine, "MOT", 3) == 0) {
316 _chrp_type = _CHRP_Motorola;
317 } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) {
318 _chrp_type = _CHRP_briq;
319 /* Map the SPOR register on briq and change the restart hook */
320 briq_SPOR = ioremap(0xff0000e8, 4);
321 ppc_md.restart = briq_restart;
322 } else {
323 /* Let's assume it is an IBM chrp if all else fails */
324 _chrp_type = _CHRP_IBM;
325 }
326 of_node_put(root);
327 printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
328
329 rtas_initialize();
330 if (rtas_token("display-character") >= 0)
331 ppc_md.progress = rtas_progress;
332
333 /* use RTAS time-of-day routines if available */
334 if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) {
335 ppc_md.get_boot_time = rtas_get_boot_time;
336 ppc_md.get_rtc_time = rtas_get_rtc_time;
337 ppc_md.set_rtc_time = rtas_set_rtc_time;
338 }
339
340 /* On pegasos, enable the L2 cache if not already done by OF */
341 pegasos_set_l2cr();
342
343 /* Lookup PCI host bridges */
344 chrp_find_bridges();
345
346 /*
347 * Temporary fixes for PCI devices.
348 * -- Geert
349 */
350 hydra_init(); /* Mac I/O */
351
352 /*
353 * Fix the Super I/O configuration
354 */
355 sio_init();
356
357 pci_create_OF_bus_map();
358
359 /*
360 * Print the banner, then scroll down so boot progress
361 * can be printed. -- Cort
362 */
363 if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
364 }
365
chrp_8259_cascade(struct irq_desc * desc)366 static void chrp_8259_cascade(struct irq_desc *desc)
367 {
368 struct irq_chip *chip = irq_desc_get_chip(desc);
369 unsigned int cascade_irq = i8259_irq();
370
371 if (cascade_irq != NO_IRQ)
372 generic_handle_irq(cascade_irq);
373
374 chip->irq_eoi(&desc->irq_data);
375 }
376
377 /*
378 * Finds the open-pic node and sets up the mpic driver.
379 */
chrp_find_openpic(void)380 static void __init chrp_find_openpic(void)
381 {
382 struct device_node *np, *root;
383 int len, i, j;
384 int isu_size, idu_size;
385 const unsigned int *iranges, *opprop = NULL;
386 int oplen = 0;
387 unsigned long opaddr;
388 int na = 1;
389
390 np = of_find_node_by_type(NULL, "open-pic");
391 if (np == NULL)
392 return;
393 root = of_find_node_by_path("/");
394 if (root) {
395 opprop = of_get_property(root, "platform-open-pic", &oplen);
396 na = of_n_addr_cells(root);
397 }
398 if (opprop && oplen >= na * sizeof(unsigned int)) {
399 opaddr = opprop[na-1]; /* assume 32-bit */
400 oplen /= na * sizeof(unsigned int);
401 } else {
402 struct resource r;
403 if (of_address_to_resource(np, 0, &r)) {
404 goto bail;
405 }
406 opaddr = r.start;
407 oplen = 0;
408 }
409
410 printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
411
412 iranges = of_get_property(np, "interrupt-ranges", &len);
413 if (iranges == NULL)
414 len = 0; /* non-distributed mpic */
415 else
416 len /= 2 * sizeof(unsigned int);
417
418 /*
419 * The first pair of cells in interrupt-ranges refers to the
420 * IDU; subsequent pairs refer to the ISUs.
421 */
422 if (oplen < len) {
423 printk(KERN_ERR "Insufficient addresses for distributed"
424 " OpenPIC (%d < %d)\n", oplen, len);
425 len = oplen;
426 }
427
428 isu_size = 0;
429 idu_size = 0;
430 if (len > 0 && iranges[1] != 0) {
431 printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
432 iranges[0], iranges[0] + iranges[1] - 1);
433 idu_size = iranges[1];
434 }
435 if (len > 1)
436 isu_size = iranges[3];
437
438 chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET,
439 isu_size, 0, " MPIC ");
440 if (chrp_mpic == NULL) {
441 printk(KERN_ERR "Failed to allocate MPIC structure\n");
442 goto bail;
443 }
444 j = na - 1;
445 for (i = 1; i < len; ++i) {
446 iranges += 2;
447 j += na;
448 printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
449 iranges[0], iranges[0] + iranges[1] - 1,
450 opprop[j]);
451 mpic_assign_isu(chrp_mpic, i - 1, opprop[j]);
452 }
453
454 mpic_init(chrp_mpic);
455 ppc_md.get_irq = mpic_get_irq;
456 bail:
457 of_node_put(root);
458 of_node_put(np);
459 }
460
461 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
462 static struct irqaction xmon_irqaction = {
463 .handler = xmon_irq,
464 .name = "XMON break",
465 };
466 #endif
467
chrp_find_8259(void)468 static void __init chrp_find_8259(void)
469 {
470 struct device_node *np, *pic = NULL;
471 unsigned long chrp_int_ack = 0;
472 unsigned int cascade_irq;
473
474 /* Look for cascade */
475 for_each_node_by_type(np, "interrupt-controller")
476 if (of_device_is_compatible(np, "chrp,iic")) {
477 pic = np;
478 break;
479 }
480 /* Ok, 8259 wasn't found. We need to handle the case where
481 * we have a pegasos that claims to be chrp but doesn't have
482 * a proper interrupt tree
483 */
484 if (pic == NULL && chrp_mpic != NULL) {
485 printk(KERN_ERR "i8259: Not found in device-tree"
486 " assuming no legacy interrupts\n");
487 return;
488 }
489
490 /* Look for intack. In a perfect world, we would look for it on
491 * the ISA bus that holds the 8259 but heh... Works that way. If
492 * we ever see a problem, we can try to re-use the pSeries code here.
493 * Also, Pegasos-type platforms don't have a proper node to start
494 * from anyway
495 */
496 for_each_node_by_name(np, "pci") {
497 const unsigned int *addrp = of_get_property(np,
498 "8259-interrupt-acknowledge", NULL);
499
500 if (addrp == NULL)
501 continue;
502 chrp_int_ack = addrp[of_n_addr_cells(np)-1];
503 break;
504 }
505 of_node_put(np);
506 if (np == NULL)
507 printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
508 " address, polling\n");
509
510 i8259_init(pic, chrp_int_ack);
511 if (ppc_md.get_irq == NULL) {
512 ppc_md.get_irq = i8259_irq;
513 irq_set_default_host(i8259_get_host());
514 }
515 if (chrp_mpic != NULL) {
516 cascade_irq = irq_of_parse_and_map(pic, 0);
517 if (cascade_irq == NO_IRQ)
518 printk(KERN_ERR "i8259: failed to map cascade irq\n");
519 else
520 irq_set_chained_handler(cascade_irq,
521 chrp_8259_cascade);
522 }
523 }
524
chrp_init_IRQ(void)525 void __init chrp_init_IRQ(void)
526 {
527 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
528 struct device_node *kbd;
529 #endif
530 chrp_find_openpic();
531 chrp_find_8259();
532
533 #ifdef CONFIG_SMP
534 /* Pegasos has no MPIC, those ops would make it crash. It might be an
535 * option to move setting them to after we probe the PIC though
536 */
537 if (chrp_mpic != NULL)
538 smp_ops = &chrp_smp_ops;
539 #endif /* CONFIG_SMP */
540
541 if (_chrp_type == _CHRP_Pegasos)
542 ppc_md.get_irq = i8259_irq;
543
544 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON)
545 /* see if there is a keyboard in the device tree
546 with a parent of type "adb" */
547 for_each_node_by_name(kbd, "keyboard")
548 if (kbd->parent && kbd->parent->type
549 && strcmp(kbd->parent->type, "adb") == 0)
550 break;
551 of_node_put(kbd);
552 if (kbd)
553 setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction);
554 #endif
555 }
556
557 void __init
chrp_init2(void)558 chrp_init2(void)
559 {
560 #ifdef CONFIG_NVRAM
561 chrp_nvram_init();
562 #endif
563
564 request_region(0x20,0x20,"pic1");
565 request_region(0xa0,0x20,"pic2");
566 request_region(0x00,0x20,"dma1");
567 request_region(0x40,0x20,"timer");
568 request_region(0x80,0x10,"dma page reg");
569 request_region(0xc0,0x20,"dma2");
570
571 if (ppc_md.progress)
572 ppc_md.progress(" Have fun! ", 0x7777);
573 }
574
chrp_probe(void)575 static int __init chrp_probe(void)
576 {
577 const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
578 "device_type", NULL);
579 if (dtype == NULL)
580 return 0;
581 if (strcmp(dtype, "chrp"))
582 return 0;
583
584 ISA_DMA_THRESHOLD = ~0L;
585 DMA_MODE_READ = 0x44;
586 DMA_MODE_WRITE = 0x48;
587
588 pm_power_off = rtas_power_off;
589
590 return 1;
591 }
592
define_machine(chrp)593 define_machine(chrp) {
594 .name = "CHRP",
595 .probe = chrp_probe,
596 .setup_arch = chrp_setup_arch,
597 .init = chrp_init2,
598 .init_early = chrp_init_early,
599 .show_cpuinfo = chrp_show_cpuinfo,
600 .init_IRQ = chrp_init_IRQ,
601 .restart = rtas_restart,
602 .halt = rtas_halt,
603 .time_init = chrp_time_init,
604 .set_rtc_time = chrp_set_rtc_time,
605 .get_rtc_time = chrp_get_rtc_time,
606 .calibrate_decr = generic_calibrate_decr,
607 .phys_mem_access_prot = pci_phys_mem_access_prot,
608 };
609