1 /*
2 * linux/arch/arm/mach-mmp/pxa910.c
3 *
4 * Code specific to PXA910
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #include <linux/module.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/list.h>
14 #include <linux/io.h>
15 #include <linux/irq.h>
16 #include <linux/irqchip/mmp.h>
17 #include <linux/platform_device.h>
18
19 #include <asm/hardware/cache-tauros2.h>
20 #include <asm/mach/time.h>
21 #include <mach/addr-map.h>
22 #include <mach/regs-apbc.h>
23 #include <mach/cputype.h>
24 #include <mach/irqs.h>
25 #include <mach/dma.h>
26 #include <mach/mfp.h>
27 #include <mach/devices.h>
28 #include <mach/pm-pxa910.h>
29 #include <mach/pxa910.h>
30
31 #include "common.h"
32
33 #define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
34
35 static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
36 {
37 MFP_ADDR_X(GPIO0, GPIO54, 0xdc),
38 MFP_ADDR_X(GPIO67, GPIO98, 0x1b8),
39 MFP_ADDR_X(GPIO100, GPIO109, 0x238),
40
41 MFP_ADDR(GPIO123, 0xcc),
42 MFP_ADDR(GPIO124, 0xd0),
43
44 MFP_ADDR(DF_IO0, 0x40),
45 MFP_ADDR(DF_IO1, 0x3c),
46 MFP_ADDR(DF_IO2, 0x38),
47 MFP_ADDR(DF_IO3, 0x34),
48 MFP_ADDR(DF_IO4, 0x30),
49 MFP_ADDR(DF_IO5, 0x2c),
50 MFP_ADDR(DF_IO6, 0x28),
51 MFP_ADDR(DF_IO7, 0x24),
52 MFP_ADDR(DF_IO8, 0x20),
53 MFP_ADDR(DF_IO9, 0x1c),
54 MFP_ADDR(DF_IO10, 0x18),
55 MFP_ADDR(DF_IO11, 0x14),
56 MFP_ADDR(DF_IO12, 0x10),
57 MFP_ADDR(DF_IO13, 0xc),
58 MFP_ADDR(DF_IO14, 0x8),
59 MFP_ADDR(DF_IO15, 0x4),
60
61 MFP_ADDR(DF_nCS0_SM_nCS2, 0x44),
62 MFP_ADDR(DF_nCS1_SM_nCS3, 0x48),
63 MFP_ADDR(SM_nCS0, 0x4c),
64 MFP_ADDR(SM_nCS1, 0x50),
65 MFP_ADDR(DF_WEn, 0x54),
66 MFP_ADDR(DF_REn, 0x58),
67 MFP_ADDR(DF_CLE_SM_OEn, 0x5c),
68 MFP_ADDR(DF_ALE_SM_WEn, 0x60),
69 MFP_ADDR(SM_SCLK, 0x64),
70 MFP_ADDR(DF_RDY0, 0x68),
71 MFP_ADDR(SM_BE0, 0x6c),
72 MFP_ADDR(SM_BE1, 0x70),
73 MFP_ADDR(SM_ADV, 0x74),
74 MFP_ADDR(DF_RDY1, 0x78),
75 MFP_ADDR(SM_ADVMUX, 0x7c),
76 MFP_ADDR(SM_RDY, 0x80),
77
78 MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84),
79
80 MFP_ADDR_END,
81 };
82
pxa910_init_irq(void)83 void __init pxa910_init_irq(void)
84 {
85 icu_init_irq();
86 #ifdef CONFIG_PM
87 icu_irq_chip.irq_set_wake = pxa910_set_wake;
88 #endif
89 }
90
pxa910_init(void)91 static int __init pxa910_init(void)
92 {
93 if (cpu_is_pxa910()) {
94 #ifdef CONFIG_CACHE_TAUROS2
95 tauros2_init(0);
96 #endif
97 mfp_init_base(MFPR_VIRT_BASE);
98 mfp_init_addr(pxa910_mfp_addr_map);
99 pxa_init_dma(IRQ_PXA910_DMA_INT0, 32);
100 pxa910_clk_init();
101 }
102
103 return 0;
104 }
105 postcore_initcall(pxa910_init);
106
107 /* system timer - clock enabled, 3.25MHz */
108 #define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
109 #define APBC_TIMERS APBC_REG(0x34)
110
pxa910_timer_init(void)111 void __init pxa910_timer_init(void)
112 {
113 /* reset and configure */
114 __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
115 __raw_writel(TIMER_CLK_RST, APBC_TIMERS);
116
117 timer_init(IRQ_PXA910_AP1_TIMER1);
118 }
119
120 /* on-chip devices */
121
122 /* NOTE: there are totally 3 UARTs on PXA910:
123 *
124 * UART1 - Slow UART (can be used both by AP and CP)
125 * UART2/3 - Fast UART
126 *
127 * To be backward compatible with the legacy FFUART/BTUART/STUART sequence,
128 * they are re-ordered as:
129 *
130 * pxa910_device_uart1 - UART2 as FFUART
131 * pxa910_device_uart2 - UART3 as BTUART
132 *
133 * UART1 is not used by AP for the moment.
134 */
135 PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22);
136 PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24);
137 PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28);
138 PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28);
139 PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
140 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
141 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
142 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
143 PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
144 PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec);
145 PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0);
146 PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0);
147
148 struct resource pxa910_resource_gpio[] = {
149 {
150 .start = 0xd4019000,
151 .end = 0xd4019fff,
152 .flags = IORESOURCE_MEM,
153 }, {
154 .start = IRQ_PXA910_AP_GPIO,
155 .end = IRQ_PXA910_AP_GPIO,
156 .name = "gpio_mux",
157 .flags = IORESOURCE_IRQ,
158 },
159 };
160
161 struct platform_device pxa910_device_gpio = {
162 .name = "mmp-gpio",
163 .id = -1,
164 .num_resources = ARRAY_SIZE(pxa910_resource_gpio),
165 .resource = pxa910_resource_gpio,
166 };
167
168 static struct resource pxa910_resource_rtc[] = {
169 {
170 .start = 0xd4010000,
171 .end = 0xd401003f,
172 .flags = IORESOURCE_MEM,
173 }, {
174 .start = IRQ_PXA910_RTC_INT,
175 .end = IRQ_PXA910_RTC_INT,
176 .name = "rtc 1Hz",
177 .flags = IORESOURCE_IRQ,
178 }, {
179 .start = IRQ_PXA910_RTC_ALARM,
180 .end = IRQ_PXA910_RTC_ALARM,
181 .name = "rtc alarm",
182 .flags = IORESOURCE_IRQ,
183 },
184 };
185
186 struct platform_device pxa910_device_rtc = {
187 .name = "sa1100-rtc",
188 .id = -1,
189 .num_resources = ARRAY_SIZE(pxa910_resource_rtc),
190 .resource = pxa910_resource_rtc,
191 };
192