1 /*
2 * OMAP3xxx PRM module functions
3 *
4 * Copyright (C) 2010-2012 Texas Instruments, Inc.
5 * Copyright (C) 2010 Nokia Corporation
6 * Benoît Cousson
7 * Paul Walmsley
8 * Rajendra Nayak <rnayak@ti.com>
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/errno.h>
17 #include <linux/err.h>
18 #include <linux/io.h>
19 #include <linux/irq.h>
20 #include <linux/of_irq.h>
21
22 #include "soc.h"
23 #include "common.h"
24 #include "vp.h"
25 #include "powerdomain.h"
26 #include "prm3xxx.h"
27 #include "prm2xxx_3xxx.h"
28 #include "cm2xxx_3xxx.h"
29 #include "prm-regbits-34xx.h"
30 #include "cm3xxx.h"
31 #include "cm-regbits-34xx.h"
32 #include "clock.h"
33
34 static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
35 static void omap3xxx_prm_ocp_barrier(void);
36 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
37 static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
38
39 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
40 OMAP_PRCM_IRQ("wkup", 0, 0),
41 OMAP_PRCM_IRQ("io", 9, 1),
42 };
43
44 static struct omap_prcm_irq_setup omap3_prcm_irq_setup = {
45 .ack = OMAP3_PRM_IRQSTATUS_MPU_OFFSET,
46 .mask = OMAP3_PRM_IRQENABLE_MPU_OFFSET,
47 .nr_regs = 1,
48 .irqs = omap3_prcm_irqs,
49 .nr_irqs = ARRAY_SIZE(omap3_prcm_irqs),
50 .irq = 11 + OMAP_INTC_START,
51 .read_pending_irqs = &omap3xxx_prm_read_pending_irqs,
52 .ocp_barrier = &omap3xxx_prm_ocp_barrier,
53 .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen,
54 .restore_irqen = &omap3xxx_prm_restore_irqen,
55 .reconfigure_io_chain = NULL,
56 };
57
58 /*
59 * omap3_prm_reset_src_map - map from bits in the PRM_RSTST hardware
60 * register (which are specific to OMAP3xxx SoCs) to reset source ID
61 * bit shifts (which is an OMAP SoC-independent enumeration)
62 */
63 static struct prm_reset_src_map omap3xxx_prm_reset_src_map[] = {
64 { OMAP3430_GLOBAL_COLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
65 { OMAP3430_GLOBAL_SW_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
66 { OMAP3430_SECURITY_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
67 { OMAP3430_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
68 { OMAP3430_SECURE_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT },
69 { OMAP3430_EXTERNAL_WARM_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT },
70 { OMAP3430_VDD1_VOLTAGE_MANAGER_RST_SHIFT,
71 OMAP_VDD_MPU_VM_RST_SRC_ID_SHIFT },
72 { OMAP3430_VDD2_VOLTAGE_MANAGER_RST_SHIFT,
73 OMAP_VDD_CORE_VM_RST_SRC_ID_SHIFT },
74 { OMAP3430_ICEPICK_RST_SHIFT, OMAP_ICEPICK_RST_SRC_ID_SHIFT },
75 { OMAP3430_ICECRUSHER_RST_SHIFT, OMAP_ICECRUSHER_RST_SRC_ID_SHIFT },
76 { -1, -1 },
77 };
78
79 /* PRM VP */
80
81 /*
82 * struct omap3_vp - OMAP3 VP register access description.
83 * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
84 */
85 struct omap3_vp {
86 u32 tranxdone_status;
87 };
88
89 static struct omap3_vp omap3_vp[] = {
90 [OMAP3_VP_VDD_MPU_ID] = {
91 .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK,
92 },
93 [OMAP3_VP_VDD_CORE_ID] = {
94 .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK,
95 },
96 };
97
98 #define MAX_VP_ID ARRAY_SIZE(omap3_vp);
99
omap3_prm_vp_check_txdone(u8 vp_id)100 static u32 omap3_prm_vp_check_txdone(u8 vp_id)
101 {
102 struct omap3_vp *vp = &omap3_vp[vp_id];
103 u32 irqstatus;
104
105 irqstatus = omap2_prm_read_mod_reg(OCP_MOD,
106 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
107 return irqstatus & vp->tranxdone_status;
108 }
109
omap3_prm_vp_clear_txdone(u8 vp_id)110 static void omap3_prm_vp_clear_txdone(u8 vp_id)
111 {
112 struct omap3_vp *vp = &omap3_vp[vp_id];
113
114 omap2_prm_write_mod_reg(vp->tranxdone_status,
115 OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
116 }
117
omap3_prm_vcvp_read(u8 offset)118 u32 omap3_prm_vcvp_read(u8 offset)
119 {
120 return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset);
121 }
122
omap3_prm_vcvp_write(u32 val,u8 offset)123 void omap3_prm_vcvp_write(u32 val, u8 offset)
124 {
125 omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset);
126 }
127
omap3_prm_vcvp_rmw(u32 mask,u32 bits,u8 offset)128 u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
129 {
130 return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset);
131 }
132
133 /**
134 * omap3xxx_prm_dpll3_reset - use DPLL3 reset to reboot the OMAP SoC
135 *
136 * Set the DPLL3 reset bit, which should reboot the SoC. This is the
137 * recommended way to restart the SoC, considering Errata i520. No
138 * return value.
139 */
omap3xxx_prm_dpll3_reset(void)140 static void omap3xxx_prm_dpll3_reset(void)
141 {
142 omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
143 OMAP2_RM_RSTCTRL);
144 /* OCP barrier */
145 omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP2_RM_RSTCTRL);
146 }
147
148 /**
149 * omap3xxx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
150 * @events: ptr to a u32, preallocated by caller
151 *
152 * Read PRM_IRQSTATUS_MPU bits, AND'ed with the currently-enabled PRM
153 * MPU IRQs, and store the result into the u32 pointed to by @events.
154 * No return value.
155 */
omap3xxx_prm_read_pending_irqs(unsigned long * events)156 static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
157 {
158 u32 mask, st;
159
160 /* XXX Can the mask read be avoided (e.g., can it come from RAM?) */
161 mask = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
162 st = omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
163
164 events[0] = mask & st;
165 }
166
167 /**
168 * omap3xxx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
169 *
170 * Force any buffered writes to the PRM IP block to complete. Needed
171 * by the PRM IRQ handler, which reads and writes directly to the IP
172 * block, to avoid race conditions after acknowledging or clearing IRQ
173 * bits. No return value.
174 */
omap3xxx_prm_ocp_barrier(void)175 static void omap3xxx_prm_ocp_barrier(void)
176 {
177 omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
178 }
179
180 /**
181 * omap3xxx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU reg
182 * @saved_mask: ptr to a u32 array to save IRQENABLE bits
183 *
184 * Save the PRM_IRQENABLE_MPU register to @saved_mask. @saved_mask
185 * must be allocated by the caller. Intended to be used in the PRM
186 * interrupt handler suspend callback. The OCP barrier is needed to
187 * ensure the write to disable PRM interrupts reaches the PRM before
188 * returning; otherwise, spurious interrupts might occur. No return
189 * value.
190 */
omap3xxx_prm_save_and_clear_irqen(u32 * saved_mask)191 static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
192 {
193 saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
194 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
195 omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
196
197 /* OCP barrier */
198 omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
199 }
200
201 /**
202 * omap3xxx_prm_restore_irqen - set PRM_IRQENABLE_MPU register from args
203 * @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
204 *
205 * Restore the PRM_IRQENABLE_MPU register from @saved_mask. Intended
206 * to be used in the PRM interrupt handler resume callback to restore
207 * values saved by omap3xxx_prm_save_and_clear_irqen(). No OCP
208 * barrier should be needed here; any pending PRM interrupts will fire
209 * once the writes reach the PRM. No return value.
210 */
omap3xxx_prm_restore_irqen(u32 * saved_mask)211 static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
212 {
213 omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
214 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
215 }
216
217 /**
218 * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
219 * @module: PRM module to clear wakeups from
220 * @regs: register set to clear, 1 or 3
221 * @wkst_mask: wkst bits to clear
222 *
223 * The purpose of this function is to clear any wake-up events latched
224 * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
225 * may occur whilst attempting to clear a PM_WKST_x register and thus
226 * set another bit in this register. A while loop is used to ensure
227 * that any peripheral wake-up events occurring while attempting to
228 * clear the PM_WKST_x are detected and cleared.
229 */
omap3xxx_prm_clear_mod_irqs(s16 module,u8 regs,u32 wkst_mask)230 static int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
231 {
232 u32 wkst, fclk, iclk, clken;
233 u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
234 u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
235 u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
236 u16 grpsel_off = (regs == 3) ?
237 OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
238 int c = 0;
239
240 wkst = omap2_prm_read_mod_reg(module, wkst_off);
241 wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
242 wkst &= wkst_mask;
243 if (wkst) {
244 iclk = omap2_cm_read_mod_reg(module, iclk_off);
245 fclk = omap2_cm_read_mod_reg(module, fclk_off);
246 while (wkst) {
247 clken = wkst;
248 omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
249 /*
250 * For USBHOST, we don't know whether HOST1 or
251 * HOST2 woke us up, so enable both f-clocks
252 */
253 if (module == OMAP3430ES2_USBHOST_MOD)
254 clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
255 omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
256 omap2_prm_write_mod_reg(wkst, module, wkst_off);
257 wkst = omap2_prm_read_mod_reg(module, wkst_off);
258 wkst &= wkst_mask;
259 c++;
260 }
261 omap2_cm_write_mod_reg(iclk, module, iclk_off);
262 omap2_cm_write_mod_reg(fclk, module, fclk_off);
263 }
264
265 return c;
266 }
267
268 /**
269 * omap3_prm_reset_modem - toggle reset signal for modem
270 *
271 * Toggles the reset signal to modem IP block. Required to allow
272 * OMAP3430 without stacked modem to idle properly.
273 */
omap3_prm_reset_modem(void)274 void __init omap3_prm_reset_modem(void)
275 {
276 omap2_prm_write_mod_reg(
277 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
278 OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
279 CORE_MOD, OMAP2_RM_RSTCTRL);
280 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
281 }
282
283 /**
284 * omap3_prm_init_pm - initialize PM related registers for PRM
285 * @has_uart4: SoC has UART4
286 * @has_iva: SoC has IVA
287 *
288 * Initializes PRM registers for PM use. Called from PM init.
289 */
omap3_prm_init_pm(bool has_uart4,bool has_iva)290 void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
291 {
292 u32 en_uart4_mask;
293 u32 grpsel_uart4_mask;
294
295 /*
296 * Enable control of expternal oscillator through
297 * sys_clkreq. In the long run clock framework should
298 * take care of this.
299 */
300 omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
301 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
302 OMAP3430_GR_MOD,
303 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
304
305 /* setup wakup source */
306 omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
307 OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
308 WKUP_MOD, PM_WKEN);
309 /* No need to write EN_IO, that is always enabled */
310 omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
311 OMAP3430_GRPSEL_GPT1_MASK |
312 OMAP3430_GRPSEL_GPT12_MASK,
313 WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
314
315 /* Enable PM_WKEN to support DSS LPR */
316 omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
317 OMAP3430_DSS_MOD, PM_WKEN);
318
319 if (has_uart4) {
320 en_uart4_mask = OMAP3630_EN_UART4_MASK;
321 grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
322 }
323
324 /* Enable wakeups in PER */
325 omap2_prm_write_mod_reg(en_uart4_mask |
326 OMAP3430_EN_GPIO2_MASK |
327 OMAP3430_EN_GPIO3_MASK |
328 OMAP3430_EN_GPIO4_MASK |
329 OMAP3430_EN_GPIO5_MASK |
330 OMAP3430_EN_GPIO6_MASK |
331 OMAP3430_EN_UART3_MASK |
332 OMAP3430_EN_MCBSP2_MASK |
333 OMAP3430_EN_MCBSP3_MASK |
334 OMAP3430_EN_MCBSP4_MASK,
335 OMAP3430_PER_MOD, PM_WKEN);
336
337 /* and allow them to wake up MPU */
338 omap2_prm_write_mod_reg(grpsel_uart4_mask |
339 OMAP3430_GRPSEL_GPIO2_MASK |
340 OMAP3430_GRPSEL_GPIO3_MASK |
341 OMAP3430_GRPSEL_GPIO4_MASK |
342 OMAP3430_GRPSEL_GPIO5_MASK |
343 OMAP3430_GRPSEL_GPIO6_MASK |
344 OMAP3430_GRPSEL_UART3_MASK |
345 OMAP3430_GRPSEL_MCBSP2_MASK |
346 OMAP3430_GRPSEL_MCBSP3_MASK |
347 OMAP3430_GRPSEL_MCBSP4_MASK,
348 OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
349
350 /* Don't attach IVA interrupts */
351 if (has_iva) {
352 omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
353 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
354 omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
355 omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
356 OMAP3430_PM_IVAGRPSEL);
357 }
358
359 /* Clear any pending 'reset' flags */
360 omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
361 omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
362 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
363 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
364 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
365 omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
366 omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
367 OMAP2_RM_RSTST);
368
369 /* Clear any pending PRCM interrupts */
370 omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
371
372 /* We need to idle iva2_pwrdm even on am3703 with no iva2. */
373 omap3xxx_prm_iva_idle();
374
375 omap3_prm_reset_modem();
376 }
377
378 /**
379 * omap3430_pre_es3_1_reconfigure_io_chain - restart wake-up daisy chain
380 *
381 * The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
382 * thing we can do is toggle EN_IO bit for earlier omaps.
383 */
omap3430_pre_es3_1_reconfigure_io_chain(void)384 static void omap3430_pre_es3_1_reconfigure_io_chain(void)
385 {
386 omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
387 PM_WKEN);
388 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
389 PM_WKEN);
390 omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
391 }
392
393 /**
394 * omap3_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
395 *
396 * Clear any previously-latched I/O wakeup events and ensure that the
397 * I/O wakeup gates are aligned with the current mux settings. Works
398 * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
399 * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
400 * return value. These registers are only available in 3430 es3.1 and later.
401 */
omap3_prm_reconfigure_io_chain(void)402 static void omap3_prm_reconfigure_io_chain(void)
403 {
404 int i = 0;
405
406 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
407 PM_WKEN);
408
409 omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
410 OMAP3430_ST_IO_CHAIN_MASK,
411 MAX_IOPAD_LATCH_TIME, i);
412 if (i == MAX_IOPAD_LATCH_TIME)
413 pr_warn("PRM: I/O chain clock line assertion timed out\n");
414
415 omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
416 PM_WKEN);
417
418 omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
419 PM_WKST);
420
421 omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
422 }
423
424 /**
425 * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
426 *
427 * Activates the I/O wakeup event latches and allows events logged by
428 * those latches to signal a wakeup event to the PRCM. For I/O
429 * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
430 * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
431 * No return value.
432 */
omap3xxx_prm_enable_io_wakeup(void)433 static void omap3xxx_prm_enable_io_wakeup(void)
434 {
435 if (prm_features & PRM_HAS_IO_WAKEUP)
436 omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
437 PM_WKEN);
438 }
439
440 /**
441 * omap3xxx_prm_read_reset_sources - return the last SoC reset source
442 *
443 * Return a u32 representing the last reset sources of the SoC. The
444 * returned reset source bits are standardized across OMAP SoCs.
445 */
omap3xxx_prm_read_reset_sources(void)446 static u32 omap3xxx_prm_read_reset_sources(void)
447 {
448 struct prm_reset_src_map *p;
449 u32 r = 0;
450 u32 v;
451
452 v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST);
453
454 p = omap3xxx_prm_reset_src_map;
455 while (p->reg_shift >= 0 && p->std_shift >= 0) {
456 if (v & (1 << p->reg_shift))
457 r |= 1 << p->std_shift;
458 p++;
459 }
460
461 return r;
462 }
463
464 /**
465 * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
466 *
467 * In cases where IVA2 is activated by bootcode, it may prevent
468 * full-chip retention or off-mode because it is not idle. This
469 * function forces the IVA2 into idle state so it can go
470 * into retention/off and thus allow full-chip retention/off.
471 */
omap3xxx_prm_iva_idle(void)472 void omap3xxx_prm_iva_idle(void)
473 {
474 /* ensure IVA2 clock is disabled */
475 omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
476
477 /* if no clock activity, nothing else to do */
478 if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
479 OMAP3430_CLKACTIVITY_IVA2_MASK))
480 return;
481
482 /* Reset IVA2 */
483 omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
484 OMAP3430_RST2_IVA2_MASK |
485 OMAP3430_RST3_IVA2_MASK,
486 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
487
488 /* Enable IVA2 clock */
489 omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
490 OMAP3430_IVA2_MOD, CM_FCLKEN);
491
492 /* Un-reset IVA2 */
493 omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
494
495 /* Disable IVA2 clock */
496 omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
497
498 /* Reset IVA2 */
499 omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
500 OMAP3430_RST2_IVA2_MASK |
501 OMAP3430_RST3_IVA2_MASK,
502 OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
503 }
504
505 /**
506 * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
507 * and clears it if asserted
508 *
509 * Checks if cold-reset has occurred and clears the status bit if yes. Returns
510 * 1 if cold-reset has occurred, 0 otherwise.
511 */
omap3xxx_prm_clear_global_cold_reset(void)512 int omap3xxx_prm_clear_global_cold_reset(void)
513 {
514 if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
515 OMAP3430_GLOBAL_COLD_RST_MASK) {
516 omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
517 OMAP3430_GR_MOD,
518 OMAP3_PRM_RSTST_OFFSET);
519 return 1;
520 }
521
522 return 0;
523 }
524
omap3_prm_save_scratchpad_contents(u32 * ptr)525 void omap3_prm_save_scratchpad_contents(u32 *ptr)
526 {
527 *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
528 OMAP3_PRM_CLKSRC_CTRL_OFFSET);
529
530 *ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
531 OMAP3_PRM_CLKSEL_OFFSET);
532 }
533
534 /* Powerdomain low-level functions */
535
omap3_pwrdm_set_next_pwrst(struct powerdomain * pwrdm,u8 pwrst)536 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
537 {
538 omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
539 (pwrst << OMAP_POWERSTATE_SHIFT),
540 pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
541 return 0;
542 }
543
omap3_pwrdm_read_next_pwrst(struct powerdomain * pwrdm)544 static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
545 {
546 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
547 OMAP2_PM_PWSTCTRL,
548 OMAP_POWERSTATE_MASK);
549 }
550
omap3_pwrdm_read_pwrst(struct powerdomain * pwrdm)551 static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
552 {
553 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
554 OMAP2_PM_PWSTST,
555 OMAP_POWERSTATEST_MASK);
556 }
557
558 /* Applicable only for OMAP3. Not supported on OMAP2 */
omap3_pwrdm_read_prev_pwrst(struct powerdomain * pwrdm)559 static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
560 {
561 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
562 OMAP3430_PM_PREPWSTST,
563 OMAP3430_LASTPOWERSTATEENTERED_MASK);
564 }
565
omap3_pwrdm_read_logic_pwrst(struct powerdomain * pwrdm)566 static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
567 {
568 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
569 OMAP2_PM_PWSTST,
570 OMAP3430_LOGICSTATEST_MASK);
571 }
572
omap3_pwrdm_read_logic_retst(struct powerdomain * pwrdm)573 static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
574 {
575 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
576 OMAP2_PM_PWSTCTRL,
577 OMAP3430_LOGICSTATEST_MASK);
578 }
579
omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain * pwrdm)580 static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
581 {
582 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
583 OMAP3430_PM_PREPWSTST,
584 OMAP3430_LASTLOGICSTATEENTERED_MASK);
585 }
586
omap3_get_mem_bank_lastmemst_mask(u8 bank)587 static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
588 {
589 switch (bank) {
590 case 0:
591 return OMAP3430_LASTMEM1STATEENTERED_MASK;
592 case 1:
593 return OMAP3430_LASTMEM2STATEENTERED_MASK;
594 case 2:
595 return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
596 case 3:
597 return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
598 default:
599 WARN_ON(1); /* should never happen */
600 return -EEXIST;
601 }
602 return 0;
603 }
604
omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain * pwrdm,u8 bank)605 static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
606 {
607 u32 m;
608
609 m = omap3_get_mem_bank_lastmemst_mask(bank);
610
611 return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
612 OMAP3430_PM_PREPWSTST, m);
613 }
614
omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain * pwrdm)615 static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
616 {
617 omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
618 return 0;
619 }
620
omap3_pwrdm_enable_hdwr_sar(struct powerdomain * pwrdm)621 static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
622 {
623 return omap2_prm_rmw_mod_reg_bits(0,
624 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
625 pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
626 }
627
omap3_pwrdm_disable_hdwr_sar(struct powerdomain * pwrdm)628 static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
629 {
630 return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
631 0, pwrdm->prcm_offs,
632 OMAP2_PM_PWSTCTRL);
633 }
634
635 struct pwrdm_ops omap3_pwrdm_operations = {
636 .pwrdm_set_next_pwrst = omap3_pwrdm_set_next_pwrst,
637 .pwrdm_read_next_pwrst = omap3_pwrdm_read_next_pwrst,
638 .pwrdm_read_pwrst = omap3_pwrdm_read_pwrst,
639 .pwrdm_read_prev_pwrst = omap3_pwrdm_read_prev_pwrst,
640 .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
641 .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
642 .pwrdm_read_logic_retst = omap3_pwrdm_read_logic_retst,
643 .pwrdm_read_prev_logic_pwrst = omap3_pwrdm_read_prev_logic_pwrst,
644 .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
645 .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,
646 .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst,
647 .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst,
648 .pwrdm_read_prev_mem_pwrst = omap3_pwrdm_read_prev_mem_pwrst,
649 .pwrdm_clear_all_prev_pwrst = omap3_pwrdm_clear_all_prev_pwrst,
650 .pwrdm_enable_hdwr_sar = omap3_pwrdm_enable_hdwr_sar,
651 .pwrdm_disable_hdwr_sar = omap3_pwrdm_disable_hdwr_sar,
652 .pwrdm_wait_transition = omap2_pwrdm_wait_transition,
653 };
654
655 /*
656 *
657 */
658
659 static int omap3xxx_prm_late_init(void);
660
661 static struct prm_ll_data omap3xxx_prm_ll_data = {
662 .read_reset_sources = &omap3xxx_prm_read_reset_sources,
663 .late_init = &omap3xxx_prm_late_init,
664 .assert_hardreset = &omap2_prm_assert_hardreset,
665 .deassert_hardreset = &omap2_prm_deassert_hardreset,
666 .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
667 .reset_system = &omap3xxx_prm_dpll3_reset,
668 .clear_mod_irqs = &omap3xxx_prm_clear_mod_irqs,
669 .vp_check_txdone = &omap3_prm_vp_check_txdone,
670 .vp_clear_txdone = &omap3_prm_vp_clear_txdone,
671 };
672
omap3xxx_prm_init(const struct omap_prcm_init_data * data)673 int __init omap3xxx_prm_init(const struct omap_prcm_init_data *data)
674 {
675 omap2_clk_legacy_provider_init(TI_CLKM_PRM,
676 prm_base + OMAP3430_IVA2_MOD);
677 if (omap3_has_io_wakeup())
678 prm_features |= PRM_HAS_IO_WAKEUP;
679
680 return prm_register(&omap3xxx_prm_ll_data);
681 }
682
683 static const struct of_device_id omap3_prm_dt_match_table[] = {
684 { .compatible = "ti,omap3-prm" },
685 { }
686 };
687
omap3xxx_prm_late_init(void)688 static int omap3xxx_prm_late_init(void)
689 {
690 int ret;
691
692 if (!(prm_features & PRM_HAS_IO_WAKEUP))
693 return 0;
694
695 if (omap3_has_io_chain_ctrl())
696 omap3_prcm_irq_setup.reconfigure_io_chain =
697 omap3_prm_reconfigure_io_chain;
698 else
699 omap3_prcm_irq_setup.reconfigure_io_chain =
700 omap3430_pre_es3_1_reconfigure_io_chain;
701
702 if (of_have_populated_dt()) {
703 struct device_node *np;
704 int irq_num;
705
706 np = of_find_matching_node(NULL, omap3_prm_dt_match_table);
707 if (np) {
708 irq_num = of_irq_get(np, 0);
709 if (irq_num >= 0)
710 omap3_prcm_irq_setup.irq = irq_num;
711 }
712 }
713
714 omap3xxx_prm_enable_io_wakeup();
715 ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
716 if (!ret)
717 irq_set_status_flags(omap_prcm_event_to_irq("io"),
718 IRQ_NOAUTOEN);
719
720 return ret;
721 }
722
omap3xxx_prm_exit(void)723 static void __exit omap3xxx_prm_exit(void)
724 {
725 prm_unregister(&omap3xxx_prm_ll_data);
726 }
727 __exitcall(omap3xxx_prm_exit);
728