1# Copyright 2008 Openmoko, Inc. 2# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> 3# 4# Licensed under GPLv2 5 6if ARCH_S3C64XX 7 8# Configuration options for the S3C6410 CPU 9 10config CPU_S3C6400 11 bool 12 help 13 Enable S3C6400 CPU support 14 15config CPU_S3C6410 16 bool 17 help 18 Enable S3C6410 CPU support 19 20config S3C64XX_PL080 21 def_bool DMADEVICES 22 select ARM_AMBA 23 select AMBA_PL08X 24 25config S3C64XX_SETUP_SDHCI 26 bool 27 select S3C64XX_SETUP_SDHCI_GPIO 28 help 29 Internal configuration for default SDHCI setup for S3C6400 and 30 S3C6410 SoCs. 31 32config S3C64XX_DEV_ONENAND1 33 bool 34 help 35 Compile in platform device definition for OneNAND1 controller 36 37config SAMSUNG_DEV_BACKLIGHT 38 bool 39 depends on SAMSUNG_DEV_PWM 40 help 41 Compile in platform device definition LCD backlight with PWM Timer 42 43# platform specific device setup 44 45config S3C64XX_SETUP_I2C0 46 bool 47 default y 48 help 49 Common setup code for i2c bus 0. 50 51 Note, currently since i2c0 is always compiled, this setup helper 52 is always compiled with it. 53 54config S3C64XX_SETUP_I2C1 55 bool 56 help 57 Common setup code for i2c bus 1. 58 59config S3C64XX_SETUP_IDE 60 bool 61 help 62 Common setup code for S3C64XX IDE. 63 64config S3C64XX_SETUP_FB_24BPP 65 bool 66 help 67 Common setup code for S3C64XX with an 24bpp RGB display helper. 68 69config S3C64XX_SETUP_KEYPAD 70 bool 71 help 72 Common setup code for S3C64XX KEYPAD GPIO configurations 73 74config S3C64XX_SETUP_SDHCI_GPIO 75 bool 76 help 77 Common setup code for S3C64XX SDHCI GPIO configurations 78 79config S3C64XX_SETUP_SPI 80 bool 81 help 82 Common setup code for SPI GPIO configurations 83 84config S3C64XX_SETUP_USB_PHY 85 bool 86 help 87 Common setup code for USB PHY controller 88 89# S36400 Macchine support 90 91config MACH_SMDK6400 92 bool "SMDK6400" 93 select CPU_S3C6400 94 select S3C64XX_SETUP_SDHCI 95 select S3C_DEV_HSMMC1 96 help 97 Machine support for the Samsung SMDK6400 98 99# S3C6410 machine support 100 101config MACH_ANW6410 102 bool "A&W6410" 103 select CPU_S3C6410 104 select S3C64XX_SETUP_FB_24BPP 105 select S3C_DEV_FB 106 help 107 Machine support for the A&W6410 108 109config MACH_MINI6410 110 bool "MINI6410" 111 select CPU_S3C6410 112 select S3C64XX_SETUP_FB_24BPP 113 select S3C64XX_SETUP_SDHCI 114 select S3C_DEV_FB 115 select S3C_DEV_HSMMC 116 select S3C_DEV_HSMMC1 117 select S3C_DEV_NAND 118 select S3C_DEV_USB_HOST 119 select SAMSUNG_DEV_ADC 120 select SAMSUNG_DEV_TS 121 help 122 Machine support for the FriendlyARM MINI6410 123 124config MACH_REAL6410 125 bool "REAL6410" 126 select CPU_S3C6410 127 select S3C64XX_SETUP_FB_24BPP 128 select S3C64XX_SETUP_SDHCI 129 select S3C_DEV_FB 130 select S3C_DEV_HSMMC 131 select S3C_DEV_HSMMC1 132 select S3C_DEV_NAND 133 select S3C_DEV_USB_HOST 134 select SAMSUNG_DEV_ADC 135 select SAMSUNG_DEV_TS 136 help 137 Machine support for the CoreWind REAL6410 138 139config MACH_SMDK6410 140 bool "SMDK6410" 141 select CPU_S3C6410 142 select HAVE_S3C2410_WATCHDOG if WATCHDOG 143 select S3C64XX_SETUP_FB_24BPP 144 select S3C64XX_SETUP_I2C1 145 select S3C64XX_SETUP_IDE 146 select S3C64XX_SETUP_KEYPAD 147 select S3C64XX_SETUP_SDHCI 148 select S3C64XX_SETUP_USB_PHY 149 select S3C_DEV_FB 150 select S3C_DEV_HSMMC 151 select S3C_DEV_HSMMC1 152 select S3C_DEV_I2C1 153 select S3C_DEV_RTC 154 select S3C_DEV_USB_HOST 155 select S3C_DEV_USB_HSOTG 156 select S3C_DEV_WDT 157 select SAMSUNG_DEV_ADC 158 select SAMSUNG_DEV_BACKLIGHT 159 select SAMSUNG_DEV_IDE 160 select SAMSUNG_DEV_KEYPAD 161 select SAMSUNG_DEV_PWM 162 select SAMSUNG_DEV_TS 163 help 164 Machine support for the Samsung SMDK6410 165 166# At least some of the SMDK6410s were shipped with the card detect 167# for the MMC/SD slots connected to the same input. This means that 168# either the boards need to be altered to have channel0 to an alternate 169# configuration or that only one slot can be used. 170 171choice 172 prompt "SMDK6410 MMC/SD slot setup" 173 depends on MACH_SMDK6410 174 175config SMDK6410_SD_CH0 176 bool "Use channel 0 only" 177 depends on MACH_SMDK6410 178 help 179 Select CON7 (channel 0) as the MMC/SD slot, as 180 at least some SMDK6410 boards come with the 181 resistors fitted so that the card detects for 182 channels 0 and 1 are the same. 183 184config SMDK6410_SD_CH1 185 bool "Use channel 1 only" 186 depends on MACH_SMDK6410 187 help 188 Select CON6 (channel 1) as the MMC/SD slot, as 189 at least some SMDK6410 boards come with the 190 resistors fitted so that the card detects for 191 channels 0 and 1 are the same. 192 193endchoice 194 195config SMDK6410_WM1190_EV1 196 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" 197 depends on MACH_SMDK6410 198 depends on I2C=y 199 select MFD_WM8350_I2C 200 select REGULATOR 201 select REGULATOR_WM8350 202 help 203 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC 204 and audio daughtercard for the Samsung SMDK6410 reference 205 platform. Enabling this option will build support for this 206 module into the kernel. The presence of the module will be 207 detected at runtime so the resulting kernel can be used 208 with or without the 1190-EV1 fitted. 209 210config SMDK6410_WM1192_EV1 211 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" 212 depends on MACH_SMDK6410 213 depends on I2C=y 214 select MFD_WM831X 215 select MFD_WM831X_I2C 216 select REGULATOR 217 select REGULATOR_WM831X 218 help 219 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC 220 daughtercard for the Samsung SMDK6410 reference platform. 221 Enabling this option will build support for this module into 222 the kernel. The presence of the daughtercard will be 223 detected at runtime so the resulting kernel can be used 224 with or without the 1192-EV1 fitted. 225 226config MACH_NCP 227 bool "NCP" 228 select CPU_S3C6410 229 select S3C64XX_SETUP_I2C1 230 select S3C_DEV_HSMMC1 231 select S3C_DEV_I2C1 232 help 233 Machine support for the Samsung NCP 234 235config MACH_HMT 236 bool "Airgoo HMT" 237 select CPU_S3C6410 238 select S3C64XX_SETUP_FB_24BPP 239 select S3C_DEV_FB 240 select S3C_DEV_NAND 241 select S3C_DEV_USB_HOST 242 select SAMSUNG_DEV_PWM 243 help 244 Machine support for the Airgoo HMT 245 246config MACH_SMARTQ 247 bool 248 select CPU_S3C6410 249 select S3C64XX_SETUP_FB_24BPP 250 select S3C64XX_SETUP_SDHCI 251 select S3C64XX_SETUP_USB_PHY 252 select S3C_DEV_FB 253 select S3C_DEV_HSMMC 254 select S3C_DEV_HSMMC1 255 select S3C_DEV_HSMMC2 256 select S3C_DEV_HWMON 257 select S3C_DEV_RTC 258 select S3C_DEV_USB_HOST 259 select S3C_DEV_USB_HSOTG 260 select SAMSUNG_DEV_ADC 261 select SAMSUNG_DEV_PWM 262 select SAMSUNG_DEV_TS 263 help 264 Shared machine support for SmartQ 5/7 265 266config MACH_SMARTQ5 267 bool "SmartQ 5" 268 select MACH_SMARTQ 269 help 270 Machine support for the SmartQ 5 271 272config MACH_SMARTQ7 273 bool "SmartQ 7" 274 select MACH_SMARTQ 275 help 276 Machine support for the SmartQ 7 277 278config MACH_WLF_CRAGG_6410 279 bool "Wolfson Cragganmore 6410" 280 depends on I2C=y 281 select CPU_S3C6410 282 select LEDS_GPIO_REGISTER 283 select S3C64XX_DEV_SPI0 284 select S3C64XX_SETUP_FB_24BPP 285 select S3C64XX_SETUP_I2C1 286 select S3C64XX_SETUP_IDE 287 select S3C64XX_SETUP_KEYPAD 288 select S3C64XX_SETUP_SDHCI 289 select S3C64XX_SETUP_SPI 290 select S3C64XX_SETUP_USB_PHY 291 select S3C_DEV_FB 292 select S3C_DEV_HSMMC 293 select S3C_DEV_HSMMC1 294 select S3C_DEV_HSMMC2 295 select S3C_DEV_I2C1 296 select S3C_DEV_RTC 297 select S3C_DEV_USB_HOST 298 select S3C_DEV_USB_HSOTG 299 select S3C_DEV_WDT 300 select SAMSUNG_DEV_ADC 301 select SAMSUNG_DEV_KEYPAD 302 select SAMSUNG_DEV_PWM 303 help 304 Machine support for the Wolfson Cragganmore S3C6410 variant. 305 306config MACH_S3C64XX_DT 307 bool "Samsung S3C6400/S3C6410 machine using Device Tree" 308 select CLKSRC_OF 309 select CPU_S3C6400 310 select CPU_S3C6410 311 select PINCTRL 312 select PINCTRL_S3C64XX 313 select USE_OF 314 help 315 Machine support for Samsung S3C6400/S3C6410 machines with Device Tree 316 enabled. 317 Select this if a fdt blob is available for your S3C64XX SoC based 318 board. 319 Note: This is under development and not all peripherals can be 320 supported with this machine file. 321 322endif 323