Lines Matching refs:error

16 #  error "VCO selected is more than maximum value. Please change the VCO multipler"
20 # error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
24 # error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
28 # error "ANOMALY 05000273, please make sure CCLK is at least 2x SCLK"
32 # error "Please select sclk less than cclk"
38 # error "The kernel load address must be after the fixed code section"
42 # error "The kernel load address must be 4 byte aligned"
47 # error "The kernel load address is too high; keep it below 10meg for safety"
51 # error the MPU will not function safely while Anomaly 05000263 applies
55 # error You are using a part with anomaly 05000448, this issue causes random memory read/write fail…
61 # error "Anomaly 05000220 does not allow you to use Write Back cache with L2 or External Memory"
65 # error You need IFLUSH in L1 inst while Anomaly 05000491 applies