Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 the console before standard serial driver is probed. This is enabled
89 tristate "BCM1xxx on-chip DUART serial support"
94 Support for the asynchronous serial interface (DUART) included in
104 bool "Support for console on a BCM1xxx DUART serial port"
109 If you say Y here, it will be possible to use a serial port as the
117 bool "AT91 / AT32 on-chip serial port support"
127 bool "Support for console on AT91 / AT32 serial port"
137 bool "Support DMA transfers on AT91 / AT32 serial port"
142 and from the Atmel AT91 / AT32 serial port. In order to
160 The ttySn nodes are legally reserved for the 8250 serial driver
161 but are often misused by other serial drivers.
188 bool "Micrel KS8695 (Centaur) serial port support"
195 bool "Support for console on KS8695 (Centaur) serial port"
205 tristate "Meson serial port support"
224 tristate "CLPS711X serial port support"
233 bool "Support for console on CLPS711X serial port"
243 tristate "Samsung SoC serial support"
249 provide all of these ports, depending on how the serial port
266 serial driver
269 bool "Samsung SoC serial debug"
272 Add support for debugging the serial driver. Since this is
278 bool "Support for console on Samsung SoC serial port"
283 Allow selection of the S3C24XX on-board serial ports for use as
300 provide all of these ports, depending on how the serial port
304 bool "Support for console on SiRF SoC serial port"
316 tristate "NVIDIA Tegra20/30 SoC serial controller"
322 provide all of these ports, depending on how the serial port
348 bool "DECstation DZ serial driver"
353 DZ11-family serial controllers for DECstations and VAXstations,
357 bool "Support console on DECstation DZ serial driver"
362 If you say Y here, it will be possible to use a serial port as the
367 Note that the firmware uses ttyS3 as the serial console on
373 tristate "DECstation Z85C30 serial support"
378 Support for the Zilog 85C350 serial communications controller used
379 for serial ports in newer DECstation systems. These include the
387 bool "Support for console on a DECstation Z85C30 serial port"
392 If you say Y here, it will be possible to use a serial port as the
397 Note that the firmware uses ttyS1 as the serial console on the
403 tristate "DC21285 serial port support"
408 PCI bridge you can enable its onboard serial port by enabling this
412 bool "Console on DC21285 serial port"
416 If you have enabled the serial port on the 21285 footbridge you can
427 bool "Marvell MPSC serial port support"
431 Say Y here if you want to use the Marvell MPSC serial controller.
434 bool "Support for console on Marvell MPSC serial port"
438 Say Y here if you want to support a serial console on a Marvell MPSC.
441 bool "PXA serial port support"
446 can enable its onboard serial ports by enabling this option.
449 bool "Console on PXA serial port"
453 If you have enabled the serial port on the Intel XScale PXA
464 bool "SA1100 serial port support"
469 can enable its onboard serial port by enabling this option.
474 bool "Console on SA1100 serial port"
478 If you have enabled the serial port on the SA1100/SA1110 StrongARM
489 tristate "Blackfin serial port support"
500 bool "Console on Blackfin serial port"
509 This driver supports the built-in serial ports of the Blackfin family
575 tristate "IMX serial port support"
583 can enable its onboard serial port by enabling this option.
586 bool "Console on IMX serial port"
591 If you have enabled the serial port on the Freescale IMX
601 tristate "Xilinx uartlite serial port support"
605 Say Y here if you want to use the Xilinx uartlite serial controller.
611 bool "Support for console on Xilinx uartlite serial port"
628 tristate "Sun Zilog8530 serial support"
631 This driver supports the Zilog8530 serial ports found on many Sparc
632 systems. Say Y or M if you want to be able to these serial ports.
635 bool "Console on Sun Zilog8530 serial port"
638 If you would like to be able to use the Zilog8530 serial port
643 tristate "Sun SU serial support"
646 This driver supports the 8250 serial ports that run the keyboard and
648 to these serial ports.
651 bool "Console on Sun SU serial port"
654 If you would like to be able to use the SU serial port
664 Saying Y here will enable the hardware MUX serial driver for
678 bool "Support for console on serial MUX"
700 tristate "Sun Siemens SAB82532 serial support"
703 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
705 serial ports.
708 bool "Console on Sun Siemens SAB82532 serial port"
711 If you would like to be able to use the SAB82532 serial port
723 tristate "SGI Zilog8530 serial support"
727 This driver supports the Zilog8530 serial ports found on SGI
728 systems. Say Y or M if you want to be able to these serial ports.
731 bool "Console on SGI Zilog8530 serial port"
736 tristate "SuperH SCI(F) serial port support"
742 int "Maximum number of SCI(F) serial ports"
767 to use serial ports, say Y. Otherwise, say N.
770 bool "Enable PNX8XX0 serial console"
775 to use serial console, say Y. Otherwise, say N.
778 tristate "LPC32XX high speed serial port support"
782 Support for the LPC32XX high speed serial ports (up to 900kbps).
788 bool "Enable LPC32XX high speed UART serial console"
792 If you would like to be able to use one of the high speed serial
806 bool "Coldfire serial support"
810 This serial driver supports the Freescale Coldfire serial ports.
813 int "Default baudrate for Coldfire serial ports"
818 ColdFire serial ports. The usual default varies from board to board,
822 bool "Coldfire serial console support"
826 Enable a ColdFire internal serial port to be the system console.
833 This driver supports the Zilog z85C30 serial ports found on
835 Say Y or M if you want to be able to these serial ports.
843 8250 serial port driver also uses these numbers, which means
851 access the built-in serial ports on powermacs will need to
863 bool "Console on Mac or PowerMac z85c30 serial port"
867 If you would like to be able to use the z85c30 serial port
872 tristate "CPM SCC/SMC serial port support"
876 This driver supports the SCC and SMC serial ports on Motorola
880 bool "Support for console on CPM SCC/SMC serial port"
896 bool "SGI Altix L1 serial console support"
902 controller serial port as your console (you want this!),
906 tristate "Microchip PIC32 serial support"
910 If you have a PIC32, this driver supports the serial ports.
912 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
913 to use a serial port as a console, this must be included in kernel and
917 bool "PIC32 serial console support"
922 of the serial ports.
927 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
931 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
937 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
941 Select this options if you'd like to use one of the PSC serial port
945 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
959 This driver is for a family of multiport serial adapters
972 Say Y here if you want to use the M32R serial controller.
979 Say Y here if you want to support a serial console.
989 Say Y here if you want to use the M32R serial controller
1015 bool "TX39XX/49XX SIO act as standard serial"
1033 a console on a serial port, say Y. Otherwise, say N.
1041 of cards which provide multiple serial ports. You would need
1052 tristate "SGI IOC4 controller serial support"
1057 and wish to use the serial ports on this card, say Y.
1061 tristate "SGI Altix IOC3 serial support"
1065 If you have an SGI Altix with an IOC3 serial card,
1069 tristate "MSM on-chip serial port support"
1074 bool "MSM serial console support"
1080 bool "VIA VT8500 on-chip serial port support"
1085 bool "VIA VT8500 serial console support"
1090 bool "ETRAX FS serial port support"
1096 bool "ETRAX FS serial console support"
1101 tristate "NetX serial port support"
1106 can enable its onboard serial port by enabling this option.
1109 module will be called netx-serial.
1112 bool "Console on NetX serial port"
1116 If you have enabled the serial port on the Hilscher NetX SoC
1120 tristate "OMAP serial port support"
1125 can enable its onboard serial ports by enabling this option.
1128 with the omap-serial driver. DMA support can be enabled from platform
1132 bool "Console on OMAP serial port"
1136 Select this option if you would like to use omap serial port as
1147 bool "Lantiq serial driver"
1155 tristate "Freescale QUICC Engine serial port support"
1161 This driver supports the QE serial ports on Freescale embedded
1165 tristate "SCCNXP serial port support"
1173 bool "Console on SCCNXP serial port"
1177 Support for console on SCCNXP serial ports.
1183 tristate "SC16IS7xx serial support"
1187 This selects support for SC16IS7xx serial ports.
1300 bool "Console on BCM63xx serial port"
1305 If you have enabled the serial port on the BCM63xx CPU
1309 tristate "GRLIB APBUART serial support"
1313 Add support for the GRLIB APBUART serial port.
1316 bool "Console on GRLIB APBUART serial port"
1440 tristate "AR933X serial port support"
1451 bool "Console on AR933X serial port"
1458 int "Maximum number of AR933X serial ports"
1462 Set this to the number of serial ports you want the driver
1492 tristate "TILE-Gx on-chip serial port support"
1521 Set this to the number of serial ports you want the driver
1530 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1549 tristate "Freescale lpuart serial port support"
1556 bool "Console on Freescale lpuart serial port"
1561 If you have enabled the lpuart serial port on the Freescale SoCs,
1565 tristate "Conexant Digicolor CX92xxx USART serial port support"
1572 bool "Console on Conexant Digicolor serial port"
1576 If you have enabled the USART serial port on Conexant Digicolor
1580 tristate "ST ASC serial port support"
1608 tristate "Support for Spreadtrum serial"
1612 This enables the driver for the Spreadtrum's serial.
1620 Support for early debug console using Spreadtrum's serial. This enables
1621 the console before standard serial driver is probed. This is enabled
1626 tristate "STMicroelectronics STM32 serial port support"
1644 bool "Marvell EBU serial port support"
1649 based on the Armada-3700 SoC and wish to use the on-board serial
1655 bool "Console on Marvell EBU serial port"