1config COMEDI 2 tristate "Data acquisition support (comedi)" 3 depends on m 4 ---help--- 5 Enable support for a wide range of data acquisition devices 6 for Linux. 7 8if COMEDI 9 10config COMEDI_DEBUG 11 bool "Comedi debugging" 12 ---help--- 13 This is an option for use by developers; most people should 14 say N here. This enables comedi core and driver debugging. 15 16config COMEDI_DEFAULT_BUF_SIZE_KB 17 int "Comedi default initial asynchronous buffer size in KiB" 18 default "2048" 19 ---help--- 20 This is the default asynchronous buffer size which is used for 21 commands running in the background in kernel space. This 22 defaults to 2048 KiB of memory so that a 16 channel card 23 running at 10 kHz has of 2-4 seconds of buffer. 24 25config COMEDI_DEFAULT_BUF_MAXSIZE_KB 26 int "Comedi default maximum asynchronous buffer size in KiB" 27 default "20480" 28 ---help--- 29 This is the default maximum asynchronous buffer size which can 30 be requested by a userspace program without root privileges. 31 This is set to 20480 KiB so that a fast I/O card with 16 32 channels running at 100 kHz has 2-4 seconds of buffer. 33 34menuconfig COMEDI_MISC_DRIVERS 35 bool "Comedi misc drivers" 36 ---help--- 37 Enable comedi misc drivers to be built 38 39 Note that the answer to this question won't directly affect the 40 kernel: saying N will just cause the configurator to skip all 41 the questions about misc non-hardware comedi drivers. 42 43if COMEDI_MISC_DRIVERS 44 45config COMEDI_BOND 46 tristate "Comedi device bonding support" 47 select COMEDI_KCOMEDILIB 48 ---help--- 49 Enable support for a driver to 'bond' (merge) multiple subdevices 50 from multiple devices together as one. 51 52 Currently, it only handles digital I/O subdevices. 53 54 To compile this driver as a module, choose M here: the module will be 55 called comedi_bond. 56 57config COMEDI_TEST 58 tristate "Fake waveform generator support" 59 ---help--- 60 Enable support for the fake waveform generator. 61 This driver is mainly for testing purposes, but can also be used to 62 generate sample waveforms on systems that don't have data acquisition 63 hardware. 64 65 To compile this driver as a module, choose M here: the module will be 66 called comedi_test. 67 68config COMEDI_PARPORT 69 tristate "Parallel port support" 70 ---help--- 71 Enable support for the standard parallel port. 72 A cheap and easy way to get a few more digital I/O lines. Steal 73 additional parallel ports from old computers or your neighbors' 74 computers. 75 76 To compile this driver as a module, choose M here: the module will be 77 called comedi_parport. 78 79config COMEDI_SERIAL2002 80 tristate "Driver for serial connected hardware" 81 ---help--- 82 Enable support for serial connected hardware 83 84 To compile this driver as a module, choose M here: the module will be 85 called serial2002. 86 87config COMEDI_SSV_DNP 88 tristate "SSV Embedded Systems DIL/Net-PC support" 89 depends on X86_32 || COMPILE_TEST 90 ---help--- 91 Enable support for SSV Embedded Systems DIL/Net-PC 92 93 To compile this driver as a module, choose M here: the module will be 94 called ssv_dnp. 95 96endif # COMEDI_MISC_DRIVERS 97 98menuconfig COMEDI_ISA_DRIVERS 99 bool "Comedi ISA and PC/104 drivers" 100 ---help--- 101 Enable comedi ISA and PC/104 drivers to be built 102 103 Note that the answer to this question won't directly affect the 104 kernel: saying N will just cause the configurator to skip all 105 the questions about ISA and PC/104 comedi drivers. 106 107if COMEDI_ISA_DRIVERS 108 109config COMEDI_PCL711 110 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" 111 select COMEDI_8254 112 ---help--- 113 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 114 115 To compile this driver as a module, choose M here: the module will be 116 called pcl711. 117 118config COMEDI_PCL724 119 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" 120 select COMEDI_8255 121 ---help--- 122 Enable support for ISA and PC/104 based 8255 digital i/o boards. This 123 driver provides a legacy comedi driver wrapper for the generic 8255 124 support driver. 125 126 Supported boards include: 127 Advantech PCL-724 24 channels 128 Advantech PCL-722 144 (or 96) channels 129 Advantech PCL-731 48 channels 130 ADlink ACL-7122 144 (or 96) channels 131 ADlink ACL-7124 24 channels 132 ADlink PET-48DIO 48 channels 133 WinSystems PCM-IO48 48 channels (PC/104) 134 Diamond Systems ONYX-MM-DIO 48 channels (PC/104) 135 136 To compile this driver as a module, choose M here: the module will be 137 called pcl724. 138 139config COMEDI_PCL726 140 tristate "Advantech PCL-726 and compatible ISA card support" 141 ---help--- 142 Enable support for Advantech PCL-726 and compatible ISA cards. 143 144 To compile this driver as a module, choose M here: the module will be 145 called pcl726. 146 147config COMEDI_PCL730 148 tristate "Simple Digital I/O board support (8-bit ports)" 149 ---help--- 150 Enable support for various simple ISA or PC/104 Digital I/O boards. 151 These boards all use 8-bit I/O ports. 152 153 Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out 154 ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out 155 ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out 156 Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out 157 Advantech PCL-725 iso - 8 in/8 out 158 ICP P8R8-DIO iso - 8 in/8 out 159 ADlink ACL-7225b iso - 16 in/16 out 160 ICP P16R16-DIO iso - 16 in/16 out 161 Advantech PCL-733 iso - 32 in 162 Advantech PCL-734 iso - 32 out 163 Diamond Systems OPMM-1616-XT iso - 16 in/16 out 164 Diamond Systems PEARL-MM-P iso - 16 out 165 Diamond Systems IR104-PBF iso - 20 in/20 out 166 167 To compile this driver as a module, choose M here: the module will be 168 called pcl730. 169 170config COMEDI_PCL812 171 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" 172 select COMEDI_ISADMA if ISA_DMA_API 173 select COMEDI_8254 174 ---help--- 175 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink 176 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, 177 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards 178 179 To compile this driver as a module, choose M here: the module will be 180 called pcl812. 181 182config COMEDI_PCL816 183 tristate "Advantech PCL-814 and PCL-816 ISA card support" 184 select COMEDI_ISADMA if ISA_DMA_API 185 select COMEDI_8254 186 ---help--- 187 Enable support for Advantech PCL-814 and PCL-816 ISA cards 188 189 To compile this driver as a module, choose M here: the module will be 190 called pcl816. 191 192config COMEDI_PCL818 193 tristate "Advantech PCL-718 and PCL-818 ISA card support" 194 select COMEDI_ISADMA if ISA_DMA_API 195 select COMEDI_8254 196 ---help--- 197 Enable support for Advantech PCL-818 ISA cards 198 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 199 200 To compile this driver as a module, choose M here: the module will be 201 called pcl818. 202 203config COMEDI_PCM3724 204 tristate "Advantech PCM-3724 PC/104 card support" 205 select COMEDI_8255 206 ---help--- 207 Enable support for Advantech PCM-3724 PC/104 cards. 208 209 To compile this driver as a module, choose M here: the module will be 210 called pcm3724. 211 212config COMEDI_AMPLC_DIO200_ISA 213 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" 214 select COMEDI_AMPLC_DIO200 215 ---help--- 216 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and 217 PC272E ISA DIO boards 218 219 To compile this driver as a module, choose M here: the module will be 220 called amplc_dio200. 221 222config COMEDI_AMPLC_PC236_ISA 223 tristate "Amplicon PC36AT DIO board support" 224 select COMEDI_AMPLC_PC236 225 ---help--- 226 Enable support for Amplicon PC36AT ISA DIO board. 227 228 To compile this driver as a module, choose M here: the module will be 229 called amplc_pc236. 230 231config COMEDI_AMPLC_PC263_ISA 232 tristate "Amplicon PC263 relay board support" 233 ---help--- 234 Enable support for Amplicon PC263 ISA relay board. This board has 235 16 reed relay output channels. 236 237 To compile this driver as a module, choose M here: the module will be 238 called amplc_pc263. 239 240config COMEDI_RTI800 241 tristate "Analog Devices RTI-800/815 ISA card support" 242 ---help--- 243 Enable support for Analog Devices RTI-800/815 ISA cards 244 245 To compile this driver as a module, choose M here: the module will be 246 called rti800. 247 248config COMEDI_RTI802 249 tristate "Analog Devices RTI-802 ISA card support" 250 ---help--- 251 Enable support for Analog Devices RTI-802 ISA cards 252 253 To compile this driver as a module, choose M here: the module will be 254 called rti802. 255 256config COMEDI_DAC02 257 tristate "Keithley Metrabyte DAC02 compatible ISA card support" 258 ---help--- 259 Enable support for Keithley Metrabyte DAC02 compatible ISA cards. 260 261 To compile this driver as a module, choose M here: the module will be 262 called dac02. 263 264config COMEDI_DAS16M1 265 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" 266 select COMEDI_8254 267 select COMEDI_8255 268 ---help--- 269 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. 270 271 To compile this driver as a module, choose M here: the module will be 272 called das16m1. 273 274config COMEDI_DAS08_ISA 275 tristate "DAS-08 compatible ISA and PC/104 card support" 276 select COMEDI_DAS08 277 ---help--- 278 Enable support for Keithley Metrabyte/ComputerBoards DAS08 279 and compatible ISA and PC/104 cards: 280 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH, 281 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO, 282 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16. 283 284 To compile this driver as a module, choose M here: the module will be 285 called das08_isa. 286 287config COMEDI_DAS16 288 tristate "DAS-16 compatible ISA and PC/104 card support" 289 select COMEDI_ISADMA if ISA_DMA_API 290 select COMEDI_8254 291 select COMEDI_8255 292 ---help--- 293 Enable support for Keithley Metrabyte/ComputerBoards DAS16 294 and compatible ISA and PC/104 cards: 295 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, 296 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and 297 ComputerBoards/MeasurementComputing PC104-DAS16/JR/, 298 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, 299 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, 300 CIO-DAS1602/16, CIO-DAS16/330 301 302 To compile this driver as a module, choose M here: the module will be 303 called das16. 304 305config COMEDI_DAS800 306 tristate "DAS800 and compatible ISA card support" 307 select COMEDI_8254 308 ---help--- 309 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards 310 Keithley Metrabyte DAS-800, DAS-801, DAS-802 311 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and 312 CIO-DAS802/16 313 314 To compile this driver as a module, choose M here: the module will be 315 called das800. 316 317config COMEDI_DAS1800 318 tristate "DAS1800 and compatible ISA card support" 319 select COMEDI_ISADMA if ISA_DMA_API 320 select COMEDI_8254 321 ---help--- 322 Enable support for DAS1800 and compatible ISA cards 323 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, 324 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, 325 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, 326 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and 327 DAS-1802AO 328 329 To compile this driver as a module, choose M here: the module will be 330 called das1800. 331 332config COMEDI_DAS6402 333 tristate "DAS6402 and compatible ISA card support" 334 select COMEDI_8254 335 ---help--- 336 Enable support for DAS6402 and compatible ISA cards 337 Computerboards, Keithley Metrabyte DAS6402 and compatibles 338 339 To compile this driver as a module, choose M here: the module will be 340 called das6402. 341 342config COMEDI_DT2801 343 tristate "Data Translation DT2801 ISA card support" 344 ---help--- 345 Enable support for Data Translation DT2801 ISA cards 346 347 To compile this driver as a module, choose M here: the module will be 348 called dt2801. 349 350config COMEDI_DT2811 351 tristate "Data Translation DT2811 ISA card support" 352 ---help--- 353 Enable support for Data Translation DT2811 ISA cards 354 355 To compile this driver as a module, choose M here: the module will be 356 called dt2811. 357 358config COMEDI_DT2814 359 tristate "Data Translation DT2814 ISA card support" 360 ---help--- 361 Enable support for Data Translation DT2814 ISA cards 362 363 To compile this driver as a module, choose M here: the module will be 364 called dt2814. 365 366config COMEDI_DT2815 367 tristate "Data Translation DT2815 ISA card support" 368 ---help--- 369 Enable support for Data Translation DT2815 ISA cards 370 371 To compile this driver as a module, choose M here: the module will be 372 called dt2815. 373 374config COMEDI_DT2817 375 tristate "Data Translation DT2817 ISA card support" 376 ---help--- 377 Enable support for Data Translation DT2817 ISA cards 378 379 To compile this driver as a module, choose M here: the module will be 380 called dt2817. 381 382config COMEDI_DT282X 383 tristate "Data Translation DT2821 series and DT-EZ ISA card support" 384 select COMEDI_ISADMA if ISA_DMA_API 385 ---help--- 386 Enable support for Data Translation DT2821 series including DT-EZ 387 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, 388 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, 389 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL 390 391 To compile this driver as a module, choose M here: the module will be 392 called dt282x. 393 394config COMEDI_DMM32AT 395 tristate "Diamond Systems MM-32-AT PC/104 board support" 396 select COMEDI_8255 397 ---help--- 398 Enable support for Diamond Systems MM-32-AT PC/104 boards 399 400 To compile this driver as a module, choose M here: the module will be 401 called dmm32at. 402 403config COMEDI_FL512 404 tristate "FL512 ISA card support" 405 ---help--- 406 Enable support for FL512 ISA card 407 408 To compile this driver as a module, choose M here: the module will be 409 called fl512. 410 411config COMEDI_AIO_AIO12_8 412 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" 413 select COMEDI_8254 414 select COMEDI_8255 415 ---help--- 416 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board 417 418 To compile this driver as a module, choose M here: the module will be 419 called aio_aio12_8. 420 421config COMEDI_AIO_IIRO_16 422 tristate "I/O Products PC/104 IIRO16 Board support" 423 ---help--- 424 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated 425 Input Board 426 427 To compile this driver as a module, choose M here: the module will be 428 called aio_iiro_16. 429 430config COMEDI_II_PCI20KC 431 tristate "Intelligent Instruments PCI-20001C carrier support" 432 depends on HAS_IOMEM 433 ---help--- 434 Enable support for Intelligent Instruments PCI-20001C carrier 435 PCI-20001, PCI-20006 and PCI-20341 436 437 To compile this driver as a module, choose M here: the module will be 438 called ii_pci20kc. 439 440config COMEDI_C6XDIGIO 441 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" 442 ---help--- 443 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter 444 card 445 446 To compile this driver as a module, choose M here: the module will be 447 called c6xdigio. 448 449config COMEDI_MPC624 450 tristate "Micro/sys MPC-624 PC/104 board support" 451 ---help--- 452 Enable support for Micro/sys MPC-624 PC/104 board 453 454 To compile this driver as a module, choose M here: the module will be 455 called mpc624. 456 457config COMEDI_ADQ12B 458 tristate "MicroAxial ADQ12-B data acquisition and control card support" 459 ---help--- 460 Enable MicroAxial ADQ12-B daq and control card support. 461 462 To compile this driver as a module, choose M here: the module will be 463 called adq12b. 464 465config COMEDI_NI_AT_A2150 466 tristate "NI AT-A2150 ISA card support" 467 select COMEDI_ISADMA if ISA_DMA_API 468 select COMEDI_8254 469 ---help--- 470 Enable support for National Instruments AT-A2150 cards 471 472 To compile this driver as a module, choose M here: the module will be 473 called ni_at_a2150. 474 475config COMEDI_NI_AT_AO 476 tristate "NI AT-AO-6/10 EISA card support" 477 select COMEDI_8254 478 ---help--- 479 Enable support for National Instruments AT-AO-6/10 cards 480 481 To compile this driver as a module, choose M here: the module will be 482 called ni_at_ao. 483 484config COMEDI_NI_ATMIO 485 tristate "NI AT-MIO E series ISA-PNP card support" 486 select COMEDI_8255 487 select COMEDI_NI_TIO 488 ---help--- 489 Enable support for National Instruments AT-MIO E series cards 490 National Instruments AT-MIO-16E-1 (ni_atmio), 491 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, 492 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 493 494 To compile this driver as a module, choose M here: the module will be 495 called ni_atmio. 496 497config COMEDI_NI_ATMIO16D 498 tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support" 499 select COMEDI_8255 500 ---help--- 501 Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards. 502 503 To compile this driver as a module, choose M here: the module will be 504 called ni_atmio16d. 505 506config COMEDI_NI_LABPC_ISA 507 tristate "NI Lab-PC and compatibles ISA support" 508 select COMEDI_NI_LABPC 509 select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API 510 ---help--- 511 Enable support for National Instruments Lab-PC and compatibles 512 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+. 513 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has 514 not yet been added to the driver. 515 516 To compile this driver as a module, choose M here: the module will be 517 called ni_labpc. 518 519config COMEDI_PCMAD 520 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" 521 ---help--- 522 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. 523 524 To compile this driver as a module, choose M here: the module will be 525 called pcmad. 526 527config COMEDI_PCMDA12 528 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" 529 ---help--- 530 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. 531 Note that the board is not ISA-PNP capable and thus needs the I/O 532 port comedi_config parameter. 533 534 To compile this driver as a module, choose M here: the module will be 535 called pcmda12. 536 537config COMEDI_PCMMIO 538 tristate "Winsystems PCM-MIO PC/104 board support" 539 ---help--- 540 Enable support for Winsystems PCM-MIO multifunction PC/104 boards. 541 542 To compile this driver as a module, choose M here: the module will be 543 called pcmmio. 544 545config COMEDI_PCMUIO 546 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" 547 ---help--- 548 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. 549 550 To compile this driver as a module, choose M here: the module will be 551 called pcmuio. 552 553config COMEDI_MULTIQ3 554 tristate "Quanser Consulting MultiQ-3 ISA card support" 555 ---help--- 556 Enable support for Quanser Consulting MultiQ-3 ISA cards 557 558 To compile this driver as a module, choose M here: the module will be 559 called multiq3. 560 561config COMEDI_S526 562 tristate "Sensoray s526 support" 563 ---help--- 564 Enable support for Sensoray s526 565 566 To compile this driver as a module, choose M here: the module will be 567 called s526. 568 569endif # COMEDI_ISA_DRIVERS 570 571menuconfig COMEDI_PCI_DRIVERS 572 tristate "Comedi PCI drivers" 573 depends on PCI 574 ---help--- 575 Enable support for comedi PCI drivers. 576 577 To compile this support as a module, choose M here: the module will 578 be called comedi_pci. 579 580if COMEDI_PCI_DRIVERS 581 582config COMEDI_8255_PCI 583 tristate "Generic PCI based 8255 digital i/o board support" 584 select COMEDI_8255 585 ---help--- 586 Enable support for PCI based 8255 digital i/o boards. This driver 587 provides a PCI wrapper around the generic 8255 driver. 588 589 Supported boards: 590 ADlink - PCI-7224, PCI-7248, and PCI-7296 591 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and 592 PCI-DIO96H 593 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, 594 PCI-6503B, PCI-6503X, and PXI-6503 595 596 To compile this driver as a module, choose M here: the module will 597 be called 8255_pci. 598 599config COMEDI_ADDI_WATCHDOG 600 tristate 601 ---help--- 602 Provides support for the watchdog subdevice found on many ADDI-DATA 603 boards. This module will be automatically selected when needed. The 604 module will be called addi_watchdog. 605 606config COMEDI_ADDI_APCI_1032 607 tristate "ADDI-DATA APCI_1032 support" 608 ---help--- 609 Enable support for ADDI-DATA APCI_1032 cards 610 611 To compile this driver as a module, choose M here: the module will be 612 called addi_apci_1032. 613 614config COMEDI_ADDI_APCI_1500 615 tristate "ADDI-DATA APCI_1500 support" 616 ---help--- 617 Enable support for ADDI-DATA APCI_1500 cards 618 619 To compile this driver as a module, choose M here: the module will be 620 called addi_apci_1500. 621 622config COMEDI_ADDI_APCI_1516 623 tristate "ADDI-DATA APCI-1016/1516/2016 support" 624 select COMEDI_ADDI_WATCHDOG 625 ---help--- 626 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards. 627 These are 16 channel, optically isolated, digital I/O boards. The 1516 628 and 2016 boards also have a watchdog for resetting the outputs to "0". 629 630 To compile this driver as a module, choose M here: the module will be 631 called addi_apci_1516. 632 633config COMEDI_ADDI_APCI_1564 634 tristate "ADDI-DATA APCI_1564 support" 635 select COMEDI_ADDI_WATCHDOG 636 ---help--- 637 Enable support for ADDI-DATA APCI_1564 cards 638 639 To compile this driver as a module, choose M here: the module will be 640 called addi_apci_1564. 641 642config COMEDI_ADDI_APCI_16XX 643 tristate "ADDI-DATA APCI_16xx support" 644 ---help--- 645 Enable support for ADDI-DATA APCI_16xx cards 646 647 To compile this driver as a module, choose M here: the module will be 648 called addi_apci_16xx. 649 650config COMEDI_ADDI_APCI_2032 651 tristate "ADDI-DATA APCI_2032 support" 652 select COMEDI_ADDI_WATCHDOG 653 ---help--- 654 Enable support for ADDI-DATA APCI_2032 cards 655 656 To compile this driver as a module, choose M here: the module will be 657 called addi_apci_2032. 658 659config COMEDI_ADDI_APCI_2200 660 tristate "ADDI-DATA APCI_2200 support" 661 select COMEDI_ADDI_WATCHDOG 662 ---help--- 663 Enable support for ADDI-DATA APCI_2200 cards 664 665 To compile this driver as a module, choose M here: the module will be 666 called addi_apci_2200. 667 668config COMEDI_ADDI_APCI_3120 669 tristate "ADDI-DATA APCI_3120/3001 support" 670 depends on HAS_DMA 671 ---help--- 672 Enable support for ADDI-DATA APCI_3120/3001 cards 673 674 To compile this driver as a module, choose M here: the module will be 675 called addi_apci_3120. 676 677config COMEDI_ADDI_APCI_3501 678 tristate "ADDI-DATA APCI_3501 support" 679 ---help--- 680 Enable support for ADDI-DATA APCI_3501 cards 681 682 To compile this driver as a module, choose M here: the module will be 683 called addi_apci_3501. 684 685config COMEDI_ADDI_APCI_3XXX 686 tristate "ADDI-DATA APCI_3xxx support" 687 ---help--- 688 Enable support for ADDI-DATA APCI_3xxx cards 689 690 To compile this driver as a module, choose M here: the module will be 691 called addi_apci_3xxx. 692 693config COMEDI_ADL_PCI6208 694 tristate "ADLink PCI-6208A support" 695 ---help--- 696 Enable support for ADLink PCI-6208A cards 697 698 To compile this driver as a module, choose M here: the module will be 699 called adl_pci6208. 700 701config COMEDI_ADL_PCI7X3X 702 tristate "ADLink PCI-723X/743X isolated digital i/o board support" 703 ---help--- 704 Enable support for ADlink PCI-723X/743X isolated digital i/o boards. 705 Supported boards include the 32-channel PCI-7230 (16 in/16 out), 706 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel 707 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out). 708 709 To compile this driver as a module, choose M here: the module will be 710 called adl_pci7x3x. 711 712config COMEDI_ADL_PCI8164 713 tristate "ADLink PCI-8164 4 Axes Motion Control board support" 714 ---help--- 715 Enable support for ADlink PCI-8164 4 Axes Motion Control board 716 717 To compile this driver as a module, choose M here: the module will be 718 called adl_pci8164. 719 720config COMEDI_ADL_PCI9111 721 tristate "ADLink PCI-9111HR support" 722 select COMEDI_8254 723 ---help--- 724 Enable support for ADlink PCI9111 cards 725 726 To compile this driver as a module, choose M here: the module will be 727 called adl_pci9111. 728 729config COMEDI_ADL_PCI9118 730 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" 731 depends on HAS_DMA 732 select COMEDI_8254 733 ---help--- 734 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards 735 736 To compile this driver as a module, choose M here: the module will be 737 called adl_pci9118. 738 739config COMEDI_ADV_PCI1710 740 tristate "Advantech PCI-171x and PCI-1731 support" 741 select COMEDI_8254 742 ---help--- 743 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, 744 PCI-1713 and PCI-1731 745 746 To compile this driver as a module, choose M here: the module will be 747 called adv_pci1710. 748 749config COMEDI_ADV_PCI1720 750 tristate "Advantech PCI-1720 support" 751 ---help--- 752 Enable support for Advantech PCI-1720 Analog Output board. 753 754 To compile this driver as a module, choose M here: the module will be 755 called adv_pci1720. 756 757config COMEDI_ADV_PCI1723 758 tristate "Advantech PCI-1723 support" 759 ---help--- 760 Enable support for Advantech PCI-1723 cards 761 762 To compile this driver as a module, choose M here: the module will be 763 called adv_pci1723. 764 765config COMEDI_ADV_PCI1724 766 tristate "Advantech PCI-1724U support" 767 ---help--- 768 Enable support for Advantech PCI-1724U cards. These are 32-channel 769 analog output cards with voltage and current loop output ranges and 770 14-bit resolution. 771 772 To compile this driver as a module, choose M here: the module will be 773 called adv_pci1724. 774 775config COMEDI_ADV_PCI1760 776 tristate "Advantech PCI-1760 support" 777 ---help--- 778 Enable support for Advantech PCI-1760 board. 779 780 To compile this driver as a module, choose M here: the module will be 781 called adv_pci1760. 782 783config COMEDI_ADV_PCI_DIO 784 tristate "Advantech PCI DIO card support" 785 select COMEDI_8254 786 select COMEDI_8255 787 ---help--- 788 Enable support for Advantech PCI DIO cards 789 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U, 790 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and 791 PCI-1762 792 793 To compile this driver as a module, choose M here: the module will be 794 called adv_pci_dio. 795 796config COMEDI_AMPLC_DIO200_PCI 797 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support" 798 select COMEDI_AMPLC_DIO200 799 ---help--- 800 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236 801 and PCIe296 DIO boards. 802 803 To compile this driver as a module, choose M here: the module will be 804 called amplc_dio200_pci. 805 806config COMEDI_AMPLC_PC236_PCI 807 tristate "Amplicon PCI236 DIO board support" 808 select COMEDI_AMPLC_PC236 809 ---help--- 810 Enable support for Amplicon PCI236 DIO board. 811 812 To compile this driver as a module, choose M here: the module will be 813 called amplc_pci236. 814 815config COMEDI_AMPLC_PC263_PCI 816 tristate "Amplicon PCI263 relay board support" 817 ---help--- 818 Enable support for Amplicon PCI263 relay board. This is a PCI board 819 with 16 reed relay output channels. 820 821 To compile this driver as a module, choose M here: the module will be 822 called amplc_pci263. 823 824config COMEDI_AMPLC_PCI224 825 tristate "Amplicon PCI224 and PCI234 support" 826 select COMEDI_8254 827 ---help--- 828 Enable support for Amplicon PCI224 and PCI234 AO boards 829 830 To compile this driver as a module, choose M here: the module will be 831 called amplc_pci224. 832 833config COMEDI_AMPLC_PCI230 834 tristate "Amplicon PCI230 and PCI260 support" 835 select COMEDI_8254 836 select COMEDI_8255 837 ---help--- 838 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O 839 boards 840 841 To compile this driver as a module, choose M here: the module will be 842 called amplc_pci230. 843 844config COMEDI_CONTEC_PCI_DIO 845 tristate "Contec PIO1616L digital I/O board support" 846 ---help--- 847 Enable support for the Contec PIO1616L digital I/O board 848 849 To compile this driver as a module, choose M here: the module will be 850 called contec_pci_dio. 851 852config COMEDI_DAS08_PCI 853 tristate "DAS-08 PCI support" 854 select COMEDI_DAS08 855 ---help--- 856 Enable support for PCI DAS-08 cards. 857 858 To compile this driver as a module, choose M here: the module will be 859 called das08_pci. 860 861config COMEDI_DT3000 862 tristate "Data Translation DT3000 series support" 863 ---help--- 864 Enable support for Data Translation DT3000 series 865 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and 866 DT3004-200 867 868 To compile this driver as a module, choose M here: the module will be 869 called dt3000. 870 871config COMEDI_DYNA_PCI10XX 872 tristate "Dynalog PCI DAQ series support" 873 ---help--- 874 Enable support for Dynalog PCI DAQ series 875 PCI-1050 876 877 To compile this driver as a module, choose M here: the module will be 878 called dyna_pci10xx. 879 880config COMEDI_GSC_HPDI 881 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" 882 ---help--- 883 Enable support for General Standards Corporation high speed parallel 884 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. 885 Only receive mode works, transmit not supported. 886 887 To compile this driver as a module, choose M here: the module will be 888 called gsc_hpdi. 889 890config COMEDI_MF6X4 891 tristate "Humusoft MF634 and MF624 DAQ Card support" 892 ---help--- 893 This driver supports both Humusoft MF634 and MF624 Data acquisition 894 cards. The legacy Humusoft MF614 card is not supported. 895 896config COMEDI_ICP_MULTI 897 tristate "Inova ICP_MULTI support" 898 ---help--- 899 Enable support for Inova ICP_MULTI card 900 901 To compile this driver as a module, choose M here: the module will be 902 called icp_multi. 903 904config COMEDI_DAQBOARD2000 905 tristate "IOtech DAQboard/2000 support" 906 select COMEDI_8255 907 ---help--- 908 Enable support for the IOtech DAQboard/2000 909 910 To compile this driver as a module, choose M here: the module will be 911 called daqboard2000. 912 913config COMEDI_JR3_PCI 914 tristate "JR3/PCI force sensor board support" 915 ---help--- 916 Enable support for JR3/PCI force sensor boards 917 918 To compile this driver as a module, choose M here: the module will be 919 called jr3_pci. 920 921config COMEDI_KE_COUNTER 922 tristate "Kolter-Electronic PCI Counter 1 card support" 923 ---help--- 924 Enable support for Kolter-Electronic PCI Counter 1 cards 925 926 To compile this driver as a module, choose M here: the module will be 927 called ke_counter. 928 929config COMEDI_CB_PCIDAS64 930 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" 931 select COMEDI_8255 932 ---help--- 933 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, 934 60xx, and 4020 series with the PLX 9080 PCI controller 935 936 To compile this driver as a module, choose M here: the module will be 937 called cb_pcidas64. 938 939config COMEDI_CB_PCIDAS 940 tristate "MeasurementComputing PCI-DAS support" 941 select COMEDI_8254 942 select COMEDI_8255 943 ---help--- 944 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with 945 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, 946 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 947 and PCI_DAS1002. 948 949 To compile this driver as a module, choose M here: the module will be 950 called cb_pcidas. 951 952config COMEDI_CB_PCIDDA 953 tristate "MeasurementComputing PCI-DDA series support" 954 select COMEDI_8255 955 ---help--- 956 Enable support for ComputerBoards/MeasurementComputing PCI-DDA 957 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, 958 PCI-DDA04/16 and PCI-DDA02/16 959 960 To compile this driver as a module, choose M here: the module will be 961 called cb_pcidda. 962 963config COMEDI_CB_PCIMDAS 964 tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support" 965 select COMEDI_8254 966 select COMEDI_8255 967 ---help--- 968 Enable support for ComputerBoards/MeasurementComputing PCI Migration 969 series PCIM-DAS1602/16 and PCIe-DAS1602/16. 970 971 To compile this driver as a module, choose M here: the module will be 972 called cb_pcimdas. 973 974config COMEDI_CB_PCIMDDA 975 tristate "MeasurementComputing PCIM-DDA06-16 support" 976 select COMEDI_8255 977 ---help--- 978 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 979 980 To compile this driver as a module, choose M here: the module will be 981 called cb_pcimdda. 982 983config COMEDI_ME4000 984 tristate "Meilhaus ME-4000 support" 985 select COMEDI_8254 986 ---help--- 987 Enable support for Meilhaus PCI data acquisition cards 988 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is 989 990 To compile this driver as a module, choose M here: the module will be 991 called me4000. 992 993config COMEDI_ME_DAQ 994 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" 995 ---help--- 996 Enable support for Meilhaus PCI data acquisition cards 997 ME-2000i, ME-2600i and ME-3000vm1 998 999 To compile this driver as a module, choose M here: the module will be 1000 called me_daq. 1001 1002config COMEDI_NI_6527 1003 tristate "NI 6527 support" 1004 ---help--- 1005 Enable support for the National Instruments 6527 PCI card 1006 1007 To compile this driver as a module, choose M here: the module will be 1008 called ni_6527. 1009 1010config COMEDI_NI_65XX 1011 tristate "NI 65xx static dio PCI card support" 1012 ---help--- 1013 Enable support for National Instruments 65xx static dio boards. 1014 Supported devices: National Instruments PCI-6509 (ni_65xx), 1015 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, 1016 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, 1017 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 1018 1019 To compile this driver as a module, choose M here: the module will be 1020 called ni_65xx. 1021 1022config COMEDI_NI_660X 1023 tristate "NI 660x counter/timer PCI card support" 1024 depends on HAS_DMA 1025 select COMEDI_NI_TIOCMD 1026 ---help--- 1027 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, 1028 PXI-6602, PXI-6608 and PXI-6624. 1029 1030 To compile this driver as a module, choose M here: the module will be 1031 called ni_660x. 1032 1033config COMEDI_NI_670X 1034 tristate "NI 670x PCI card support" 1035 ---help--- 1036 Enable support for National Instruments PCI-6703 and PCI-6704 1037 1038 To compile this driver as a module, choose M here: the module will be 1039 called ni_670x. 1040 1041config COMEDI_NI_LABPC_PCI 1042 tristate "NI Lab-PC PCI-1200 support" 1043 select COMEDI_NI_LABPC 1044 ---help--- 1045 Enable support for National Instruments Lab-PC PCI-1200. 1046 1047 To compile this driver as a module, choose M here: the module will be 1048 called ni_labpc_pci. 1049 1050config COMEDI_NI_PCIDIO 1051 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support" 1052 depends on HAS_DMA 1053 select COMEDI_MITE 1054 select COMEDI_8255 1055 ---help--- 1056 Enable support for National Instruments PCI-DIO-32HS, PXI-6533, 1057 PCI-6533 and PCI-6534 1058 1059 To compile this driver as a module, choose M here: the module will be 1060 called ni_pcidio. 1061 1062config COMEDI_NI_PCIMIO 1063 tristate "NI PCI-MIO-E series and M series support" 1064 depends on HAS_DMA 1065 select COMEDI_NI_TIOCMD 1066 select COMEDI_8255 1067 ---help--- 1068 Enable support for National Instruments PCI-MIO-E series and M series 1069 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, 1070 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, 1071 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, 1072 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, 1073 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229, 1074 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259, 1075 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711, 1076 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, 1077 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 1078 1079 To compile this driver as a module, choose M here: the module will be 1080 called ni_pcimio. 1081 1082config COMEDI_RTD520 1083 tristate "Real Time Devices PCI4520/DM7520 support" 1084 select COMEDI_8254 1085 ---help--- 1086 Enable support for Real Time Devices PCI4520/DM7520 1087 1088 To compile this driver as a module, choose M here: the module will be 1089 called rtd520. 1090 1091config COMEDI_S626 1092 tristate "Sensoray 626 support" 1093 ---help--- 1094 Enable support for Sensoray 626 1095 1096 To compile this driver as a module, choose M here: the module will be 1097 called s626. 1098 1099config COMEDI_MITE 1100 depends on HAS_DMA 1101 tristate 1102 1103config COMEDI_NI_TIOCMD 1104 tristate 1105 depends on HAS_DMA 1106 select COMEDI_NI_TIO 1107 select COMEDI_MITE 1108 1109endif # COMEDI_PCI_DRIVERS 1110 1111menuconfig COMEDI_PCMCIA_DRIVERS 1112 tristate "Comedi PCMCIA drivers" 1113 depends on PCMCIA 1114 ---help--- 1115 Enable support for comedi PCMCIA drivers. 1116 1117 To compile this support as a module, choose M here: the module will 1118 be called comedi_pcmcia. 1119 1120if COMEDI_PCMCIA_DRIVERS 1121 1122config COMEDI_CB_DAS16_CS 1123 tristate "CB DAS16 series PCMCIA support" 1124 select COMEDI_8254 1125 ---help--- 1126 Enable support for the ComputerBoards/MeasurementComputing PCMCIA 1127 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 1128 1129 To compile this driver as a module, choose M here: the module will be 1130 called cb_das16_cs. 1131 1132config COMEDI_DAS08_CS 1133 tristate "CB DAS08 PCMCIA support" 1134 select COMEDI_DAS08 1135 ---help--- 1136 Enable support for the ComputerBoards/MeasurementComputing DAS-08 1137 PCMCIA card 1138 1139 To compile this driver as a module, choose M here: the module will be 1140 called das08_cs. 1141 1142config COMEDI_NI_DAQ_700_CS 1143 tristate "NI DAQCard-700 PCMCIA support" 1144 ---help--- 1145 Enable support for the National Instruments PCMCIA DAQCard-700 DIO 1146 1147 To compile this driver as a module, choose M here: the module will be 1148 called ni_daq_700. 1149 1150config COMEDI_NI_DAQ_DIO24_CS 1151 tristate "NI DAQ-Card DIO-24 PCMCIA support" 1152 select COMEDI_8255 1153 ---help--- 1154 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 1155 1156 To compile this driver as a module, choose M here: the module will be 1157 called ni_daq_dio24. 1158 1159config COMEDI_NI_LABPC_CS 1160 tristate "NI DAQCard-1200 PCMCIA support" 1161 select COMEDI_NI_LABPC 1162 ---help--- 1163 Enable support for the National Instruments PCMCIA DAQCard-1200 1164 1165 To compile this driver as a module, choose M here: the module will be 1166 called ni_labpc_cs. 1167 1168config COMEDI_NI_MIO_CS 1169 tristate "NI DAQCard E series PCMCIA support" 1170 select COMEDI_NI_TIO 1171 select COMEDI_8255 1172 ---help--- 1173 Enable support for the National Instruments PCMCIA DAQCard E series 1174 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E 1175 and DAQCard-6036E 1176 1177 To compile this driver as a module, choose M here: the module will be 1178 called ni_mio_cs. 1179 1180config COMEDI_QUATECH_DAQP_CS 1181 tristate "Quatech DAQP PCMCIA data capture card support" 1182 ---help--- 1183 Enable support for the Quatech DAQP PCMCIA data capture cards 1184 DAQP-208 and DAQP-308 1185 1186 To compile this driver as a module, choose M here: the module will be 1187 called quatech_daqp_cs. 1188 1189endif # COMEDI_PCMCIA_DRIVERS 1190 1191menuconfig COMEDI_USB_DRIVERS 1192 tristate "Comedi USB drivers" 1193 depends on USB 1194 ---help--- 1195 Enable support for comedi USB drivers. 1196 1197 To compile this support as a module, choose M here: the module will 1198 be called comedi_usb. 1199 1200if COMEDI_USB_DRIVERS 1201 1202config COMEDI_DT9812 1203 tristate "DataTranslation DT9812 USB module support" 1204 ---help--- 1205 Enable support for the Data Translation DT9812 USB module 1206 1207 To compile this driver as a module, choose M here: the module will be 1208 called dt9812. 1209 1210config COMEDI_NI_USB6501 1211 tristate "NI USB-6501 support" 1212 ---help--- 1213 Enable support for the National Instruments USB-6501 module. 1214 1215 The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that 1216 provides 24 digital I/O lines channels and one 32-bit counter. 1217 1218 To compile this driver as a module, choose M here: the module will be 1219 called ni_usb6501. 1220 1221config COMEDI_USBDUX 1222 tristate "ITL USB-DUX-D support" 1223 ---help--- 1224 Enable support for the Incite Technology Ltd USB-DUX-D Board 1225 1226 To compile this driver as a module, choose M here: the module will be 1227 called usbdux. 1228 1229config COMEDI_USBDUXFAST 1230 tristate "ITL USB-DUXfast support" 1231 ---help--- 1232 Enable support for the Incite Technology Ltd USB-DUXfast Board 1233 1234 To compile this driver as a module, choose M here: the module will be 1235 called usbduxfast. 1236 1237config COMEDI_USBDUXSIGMA 1238 tristate "ITL USB-DUXsigma support" 1239 ---help--- 1240 Enable support for the Incite Technology Ltd USB-DUXsigma Board 1241 1242 To compile this driver as a module, choose M here: the module will be 1243 called usbduxsigma. 1244 1245config COMEDI_VMK80XX 1246 tristate "Velleman VM110/VM140 USB Board support" 1247 ---help--- 1248 Build the Velleman USB Board Low-Level Driver supporting the 1249 K8055/K8061 aka VM110/VM140 devices 1250 1251 To compile this driver as a module, choose M here: the module will be 1252 called vmk80xx. 1253 1254endif # COMEDI_USB_DRIVERS 1255 1256config COMEDI_8254 1257 tristate 1258 1259config COMEDI_8255 1260 tristate 1261 1262config COMEDI_8255_SA 1263 tristate "Standalone 8255 support" 1264 select COMEDI_8255 1265 ---help--- 1266 Enable support for 8255 digital I/O as a standalone driver. 1267 1268 You should enable compilation this driver if you plan to use a board 1269 that has an 8255 chip at a known I/O base address and there are no 1270 other Comedi drivers for the board. 1271 1272 Note that Comedi drivers for most multi-function boards incorporating 1273 an 8255 chip use the 'comedi_8255' module. Most PCI-based 8255 1274 boards use the 8255_pci driver as a wrapper around the 'comedi_8255' 1275 module. 1276 1277 To compile this driver as a module, choose M here: the module will be 1278 called 8255. 1279 1280config COMEDI_KCOMEDILIB 1281 tristate "Comedi kcomedilib" 1282 ---help--- 1283 Build the kcomedilib. 1284 1285 This is a kernel module used to open and manipulate Comedi devices 1286 from within kernel code. It is currently only used by the 1287 comedi_bond driver, and its functionality has been stripped down to 1288 the needs of that driver, so is currently not very useful for 1289 anything else. 1290 1291 To compile kcomedilib as a module, choose M here: the module will be 1292 called kcomedilib. 1293 1294config COMEDI_AMPLC_DIO200 1295 select COMEDI_8254 1296 tristate 1297 1298config COMEDI_AMPLC_PC236 1299 tristate 1300 select COMEDI_8255 1301 1302config COMEDI_DAS08 1303 tristate 1304 select COMEDI_8254 1305 select COMEDI_8255 1306 1307config COMEDI_ISADMA 1308 tristate 1309 1310config COMEDI_NI_LABPC 1311 tristate 1312 select COMEDI_8254 1313 select COMEDI_8255 1314 1315config COMEDI_NI_LABPC_ISADMA 1316 tristate 1317 select COMEDI_ISADMA 1318 1319config COMEDI_NI_TIO 1320 tristate 1321 1322endif # COMEDI 1323