• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1config SND_OMAP_SOC
2	tristate "SoC Audio for the Texas Instruments OMAP chips"
3	depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST)
4	select SND_DMAENGINE_PCM
5
6config SND_OMAP_SOC_DMIC
7	tristate
8
9config SND_OMAP_SOC_MCBSP
10	tristate
11
12config SND_OMAP_SOC_MCPDM
13	tristate
14
15config SND_OMAP_SOC_HDMI_AUDIO
16	tristate "HDMI audio support for OMAP4+ based SoCs"
17	depends on SND_OMAP_SOC
18	help
19	  For HDMI audio to work OMAPDSS HDMI support should be
20	  enabled.
21	  The hdmi audio driver implements cpu-dai component using the
22	  callbacks provided by OMAPDSS and registers the component
23	  under DSS HDMI device. Omap-pcm is registered for platform
24	  component also under DSS HDMI device. Dummy codec is used as
25	  as codec component. The hdmi audio driver implements also
26	  the card and registers it under its own platform device.
27	  The device for the driver is registered by OMAPDSS hdmi
28	  driver.
29
30config SND_OMAP_SOC_N810
31	tristate "SoC Audio support for Nokia N810"
32	depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
33	depends on OMAP_MUX
34	select SND_OMAP_SOC_MCBSP
35	select SND_SOC_TLV320AIC3X
36	help
37	  Say Y if you want to add support for SoC audio on Nokia N810.
38
39config SND_OMAP_SOC_RX51
40	tristate "SoC Audio support for Nokia N900 (RX-51)"
41	depends on SND_OMAP_SOC && ARM && I2C
42	select SND_OMAP_SOC_MCBSP
43	select SND_SOC_TLV320AIC3X
44	select SND_SOC_TPA6130A2
45	depends on GPIOLIB
46	help
47	  Say Y if you want to add support for SoC audio on Nokia N900
48	  cellphone.
49
50config SND_OMAP_SOC_AMS_DELTA
51	tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
52	depends on SND_OMAP_SOC && MACH_AMS_DELTA && TTY
53	select SND_OMAP_SOC_MCBSP
54	select SND_SOC_CX20442
55	help
56	  Say Y  if you want to add support  for SoC audio device  connected to
57	  a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
58
59	  Note that in order to get those devices fully supported,  you have to
60	  build  the kernel  with  standard  serial port  driver  included  and
61	  configured for at least 4 ports.  Then, from userspace, you must load
62	  a line discipline #19 on the modem (ttyS3) serial line.  The simplest
63	  way to achieve this is to install util-linux-ng  and use the included
64	  ldattach  utility.  This  can be  started  automatically  from  udev,
65	  a simple rule like this one should do the trick (it does for me):
66	  	ACTION=="add", KERNEL=="controlC0", \
67				RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
68
69config SND_OMAP_SOC_OSK5912
70	tristate "SoC Audio support for omap osk5912"
71	depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
72	select SND_OMAP_SOC_MCBSP
73	select SND_SOC_TLV320AIC23_I2C
74	help
75	  Say Y if you want to add support for SoC audio on osk5912.
76
77config SND_OMAP_SOC_AM3517EVM
78	tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
79	depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
80	select SND_OMAP_SOC_MCBSP
81	select SND_SOC_TLV320AIC23_I2C
82	help
83	  Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
84	  EVM.
85
86config SND_OMAP_SOC_OMAP_TWL4030
87	tristate "SoC Audio support for TI SoC based boards with twl4030 codec"
88	depends on TWL4030_CORE && SND_OMAP_SOC
89	select SND_OMAP_SOC_MCBSP
90	select SND_SOC_TWL4030
91	help
92	  Say Y if you want to add support for SoC audio on TI SoC based boards
93	  using twl4030 as c codec. This driver currently supports:
94	  - Beagleboard or Devkit8000
95	  - Gumstix Overo or CompuLab CM-T35/CM-T3730
96	  - IGEP v2
97	  - OMAP3EVM
98	  - SDP3430
99	  - Zoom2
100
101config SND_OMAP_SOC_OMAP_ABE_TWL6040
102	tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
103	depends on TWL6040_CORE && SND_OMAP_SOC && COMMON_CLK
104	depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST
105	select SND_OMAP_SOC_DMIC
106	select SND_OMAP_SOC_MCPDM
107	select SND_SOC_TWL6040
108	select SND_SOC_DMIC
109	select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS)
110	select CLK_TWL6040
111	help
112	  Say Y if you want to add support for SoC audio on OMAP boards using
113	  ABE and twl6040 codec. This driver currently supports:
114	  - SDP4430/Blaze boards
115	  - PandaBoard (4430)
116	  - PandaBoardES (4460)
117	  - omap5-uevm (5432)
118
119config SND_OMAP_SOC_OMAP3_PANDORA
120	tristate "SoC Audio support for OMAP3 Pandora"
121	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
122	select SND_OMAP_SOC_MCBSP
123	select SND_SOC_TWL4030
124	help
125	  Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
126