• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  *
3  * Intel Management Engine Interface (Intel MEI) Linux driver
4  * Copyright (c) 2003-2012, Intel Corporation.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  */
16 
17 #ifndef _MEI_HW_TYPES_H_
18 #define _MEI_HW_TYPES_H_
19 
20 #include <linux/uuid.h>
21 
22 /*
23  * Timeouts in Seconds
24  */
25 #define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
26 #define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
27 
28 #define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
29 #define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
30 
31 #define MEI_IAMTHIF_STALL_TIMER    12  /* HPS */
32 
33 #define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
34 #define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
35 #define MEI_HBM_TIMEOUT             1  /* 1 second */
36 
37 /*
38  * MEI Version
39  */
40 #define HBM_MINOR_VERSION                   0
41 #define HBM_MAJOR_VERSION                   2
42 
43 /*
44  * MEI version with PGI support
45  */
46 #define HBM_MINOR_VERSION_PGI               1
47 #define HBM_MAJOR_VERSION_PGI               1
48 
49 /*
50  * MEI version with Dynamic clients support
51  */
52 #define HBM_MINOR_VERSION_DC               0
53 #define HBM_MAJOR_VERSION_DC               2
54 
55 /*
56  * MEI version with immediate reply to enum request support
57  */
58 #define HBM_MINOR_VERSION_IE               0
59 #define HBM_MAJOR_VERSION_IE               2
60 
61 /*
62  * MEI version with disconnect on connection timeout support
63  */
64 #define HBM_MINOR_VERSION_DOT              0
65 #define HBM_MAJOR_VERSION_DOT              2
66 
67 /*
68  * MEI version with notifcation support
69  */
70 #define HBM_MINOR_VERSION_EV               0
71 #define HBM_MAJOR_VERSION_EV               2
72 
73 /*
74  * MEI version with fixed address client support
75  */
76 #define HBM_MINOR_VERSION_FA               0
77 #define HBM_MAJOR_VERSION_FA               2
78 
79 /* Host bus message command opcode */
80 #define MEI_HBM_CMD_OP_MSK                  0x7f
81 /* Host bus message command RESPONSE */
82 #define MEI_HBM_CMD_RES_MSK                 0x80
83 
84 /*
85  * MEI Bus Message Command IDs
86  */
87 #define HOST_START_REQ_CMD                  0x01
88 #define HOST_START_RES_CMD                  0x81
89 
90 #define HOST_STOP_REQ_CMD                   0x02
91 #define HOST_STOP_RES_CMD                   0x82
92 
93 #define ME_STOP_REQ_CMD                     0x03
94 
95 #define HOST_ENUM_REQ_CMD                   0x04
96 #define HOST_ENUM_RES_CMD                   0x84
97 
98 #define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
99 #define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
100 
101 #define CLIENT_CONNECT_REQ_CMD              0x06
102 #define CLIENT_CONNECT_RES_CMD              0x86
103 
104 #define CLIENT_DISCONNECT_REQ_CMD           0x07
105 #define CLIENT_DISCONNECT_RES_CMD           0x87
106 
107 #define MEI_FLOW_CONTROL_CMD                0x08
108 
109 #define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
110 #define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
111 #define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
112 #define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
113 
114 #define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
115 #define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
116 
117 #define MEI_HBM_NOTIFY_REQ_CMD              0x10
118 #define MEI_HBM_NOTIFY_RES_CMD              0x90
119 #define MEI_HBM_NOTIFICATION_CMD            0x11
120 
121 /*
122  * MEI Stop Reason
123  * used by hbm_host_stop_request.reason
124  */
125 enum mei_stop_reason_types {
126 	DRIVER_STOP_REQUEST = 0x00,
127 	DEVICE_D1_ENTRY = 0x01,
128 	DEVICE_D2_ENTRY = 0x02,
129 	DEVICE_D3_ENTRY = 0x03,
130 	SYSTEM_S1_ENTRY = 0x04,
131 	SYSTEM_S2_ENTRY = 0x05,
132 	SYSTEM_S3_ENTRY = 0x06,
133 	SYSTEM_S4_ENTRY = 0x07,
134 	SYSTEM_S5_ENTRY = 0x08
135 };
136 
137 
138 /**
139  * enum mei_hbm_status  - mei host bus messages return values
140  *
141  * @MEI_HBMS_SUCCESS           : status success
142  * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
143  * @MEI_HBMS_ALREADY_EXISTS    : connection already established
144  * @MEI_HBMS_REJECTED          : connection is rejected
145  * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
146  * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
147  * @MEI_HBMS_ALREADY_STARTED   : system is already started
148  * @MEI_HBMS_NOT_STARTED       : system not started
149  *
150  * @MEI_HBMS_MAX               : sentinel
151  */
152 enum mei_hbm_status {
153 	MEI_HBMS_SUCCESS           = 0,
154 	MEI_HBMS_CLIENT_NOT_FOUND  = 1,
155 	MEI_HBMS_ALREADY_EXISTS    = 2,
156 	MEI_HBMS_REJECTED          = 3,
157 	MEI_HBMS_INVALID_PARAMETER = 4,
158 	MEI_HBMS_NOT_ALLOWED       = 5,
159 	MEI_HBMS_ALREADY_STARTED   = 6,
160 	MEI_HBMS_NOT_STARTED       = 7,
161 
162 	MEI_HBMS_MAX
163 };
164 
165 
166 /*
167  * Client Connect Status
168  * used by hbm_client_connect_response.status
169  */
170 enum mei_cl_connect_status {
171 	MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
172 	MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
173 	MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
174 	MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
175 	MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
176 	MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
177 };
178 
179 /*
180  * Client Disconnect Status
181  */
182 enum  mei_cl_disconnect_status {
183 	MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
184 };
185 
186 /*
187  *  MEI BUS Interface Section
188  */
189 struct mei_msg_hdr {
190 	u32 me_addr:8;
191 	u32 host_addr:8;
192 	u32 length:9;
193 	u32 reserved:5;
194 	u32 internal:1;
195 	u32 msg_complete:1;
196 } __packed;
197 
198 
199 struct mei_bus_message {
200 	u8 hbm_cmd;
201 	u8 data[0];
202 } __packed;
203 
204 /**
205  * struct hbm_cl_cmd - client specific host bus command
206  *	CONNECT, DISCONNECT, and FlOW CONTROL
207  *
208  * @hbm_cmd: bus message command header
209  * @me_addr: address of the client in ME
210  * @host_addr: address of the client in the driver
211  * @data: generic data
212  */
213 struct mei_hbm_cl_cmd {
214 	u8 hbm_cmd;
215 	u8 me_addr;
216 	u8 host_addr;
217 	u8 data;
218 };
219 
220 struct hbm_version {
221 	u8 minor_version;
222 	u8 major_version;
223 } __packed;
224 
225 struct hbm_host_version_request {
226 	u8 hbm_cmd;
227 	u8 reserved;
228 	struct hbm_version host_version;
229 } __packed;
230 
231 struct hbm_host_version_response {
232 	u8 hbm_cmd;
233 	u8 host_version_supported;
234 	struct hbm_version me_max_version;
235 } __packed;
236 
237 struct hbm_host_stop_request {
238 	u8 hbm_cmd;
239 	u8 reason;
240 	u8 reserved[2];
241 } __packed;
242 
243 struct hbm_host_stop_response {
244 	u8 hbm_cmd;
245 	u8 reserved[3];
246 } __packed;
247 
248 struct hbm_me_stop_request {
249 	u8 hbm_cmd;
250 	u8 reason;
251 	u8 reserved[2];
252 } __packed;
253 
254 /**
255  * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
256  *
257  * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
258  * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
259  */
260 enum hbm_host_enum_flags {
261 	MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
262 	MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
263 };
264 
265 /**
266  * struct hbm_host_enum_request - enumeration request from host to fw
267  *
268  * @hbm_cmd : bus message command header
269  * @flags   : request flags
270  * @reserved: reserved
271  */
272 struct hbm_host_enum_request {
273 	u8 hbm_cmd;
274 	u8 flags;
275 	u8 reserved[2];
276 } __packed;
277 
278 struct hbm_host_enum_response {
279 	u8 hbm_cmd;
280 	u8 reserved[3];
281 	u8 valid_addresses[32];
282 } __packed;
283 
284 struct mei_client_properties {
285 	uuid_le protocol_name;
286 	u8 protocol_version;
287 	u8 max_number_of_connections;
288 	u8 fixed_address;
289 	u8 single_recv_buf;
290 	u32 max_msg_length;
291 } __packed;
292 
293 struct hbm_props_request {
294 	u8 hbm_cmd;
295 	u8 me_addr;
296 	u8 reserved[2];
297 } __packed;
298 
299 struct hbm_props_response {
300 	u8 hbm_cmd;
301 	u8 me_addr;
302 	u8 status;
303 	u8 reserved[1];
304 	struct mei_client_properties client_properties;
305 } __packed;
306 
307 /**
308  * struct hbm_add_client_request - request to add a client
309  *     might be sent by fw after enumeration has already completed
310  *
311  * @hbm_cmd: bus message command header
312  * @me_addr: address of the client in ME
313  * @reserved: reserved
314  * @client_properties: client properties
315  */
316 struct hbm_add_client_request {
317 	u8 hbm_cmd;
318 	u8 me_addr;
319 	u8 reserved[2];
320 	struct mei_client_properties client_properties;
321 } __packed;
322 
323 /**
324  * struct hbm_add_client_response - response to add a client
325  *     sent by the host to report client addition status to fw
326  *
327  * @hbm_cmd: bus message command header
328  * @me_addr: address of the client in ME
329  * @status: if HBMS_SUCCESS then the client can now accept connections.
330  * @reserved: reserved
331  */
332 struct hbm_add_client_response {
333 	u8 hbm_cmd;
334 	u8 me_addr;
335 	u8 status;
336 	u8 reserved[1];
337 } __packed;
338 
339 /**
340  * struct hbm_power_gate - power gate request/response
341  *
342  * @hbm_cmd: bus message command header
343  * @reserved: reserved
344  */
345 struct hbm_power_gate {
346 	u8 hbm_cmd;
347 	u8 reserved[3];
348 } __packed;
349 
350 /**
351  * struct hbm_client_connect_request - connect/disconnect request
352  *
353  * @hbm_cmd: bus message command header
354  * @me_addr: address of the client in ME
355  * @host_addr: address of the client in the driver
356  * @reserved: reserved
357  */
358 struct hbm_client_connect_request {
359 	u8 hbm_cmd;
360 	u8 me_addr;
361 	u8 host_addr;
362 	u8 reserved;
363 } __packed;
364 
365 /**
366  * struct hbm_client_connect_response - connect/disconnect response
367  *
368  * @hbm_cmd: bus message command header
369  * @me_addr: address of the client in ME
370  * @host_addr: address of the client in the driver
371  * @status: status of the request
372  */
373 struct hbm_client_connect_response {
374 	u8 hbm_cmd;
375 	u8 me_addr;
376 	u8 host_addr;
377 	u8 status;
378 } __packed;
379 
380 
381 #define MEI_FC_MESSAGE_RESERVED_LENGTH           5
382 
383 struct hbm_flow_control {
384 	u8 hbm_cmd;
385 	u8 me_addr;
386 	u8 host_addr;
387 	u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
388 } __packed;
389 
390 #define MEI_HBM_NOTIFICATION_START 1
391 #define MEI_HBM_NOTIFICATION_STOP  0
392 /**
393  * struct hbm_notification_request - start/stop notification request
394  *
395  * @hbm_cmd: bus message command header
396  * @me_addr: address of the client in ME
397  * @host_addr: address of the client in the driver
398  * @start:  start = 1 or stop = 0 asynchronous notifications
399  */
400 struct hbm_notification_request {
401 	u8 hbm_cmd;
402 	u8 me_addr;
403 	u8 host_addr;
404 	u8 start;
405 } __packed;
406 
407 /**
408  * struct hbm_notification_response - start/stop notification response
409  *
410  * @hbm_cmd: bus message command header
411  * @me_addr: address of the client in ME
412  * @host_addr: - address of the client in the driver
413  * @status: (mei_hbm_status) response status for the request
414  *  - MEI_HBMS_SUCCESS: successful stop/start
415  *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
416  *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
417  *                         started notification.
418  *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
419  *                         asynchronous notifications are currently disabled.
420  *
421  * @start:  start = 1 or stop = 0 asynchronous notifications
422  * @reserved: reserved
423  */
424 struct hbm_notification_response {
425 	u8 hbm_cmd;
426 	u8 me_addr;
427 	u8 host_addr;
428 	u8 status;
429 	u8 start;
430 	u8 reserved[3];
431 } __packed;
432 
433 /**
434  * struct hbm_notification - notification event
435  *
436  * @hbm_cmd: bus message command header
437  * @me_addr:  address of the client in ME
438  * @host_addr:  address of the client in the driver
439  * @reserved: reserved for alignment
440  */
441 struct hbm_notification {
442 	u8 hbm_cmd;
443 	u8 me_addr;
444 	u8 host_addr;
445 	u8 reserved[1];
446 } __packed;
447 
448 #endif
449