1 /*
2 * INET An implementation of the TCP/IP protocol suite for the LINUX
3 * operating system. NET is implemented using the BSD Socket
4 * interface as the means of communication with the user level.
5 *
6 * Definitions used by the ARCnet driver.
7 *
8 * Authors: Avery Pennarun and David Woodhouse
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License
12 * as published by the Free Software Foundation; either version
13 * 2 of the License, or (at your option) any later version.
14 *
15 */
16 #ifndef _LINUX_ARCDEVICE_H
17 #define _LINUX_ARCDEVICE_H
18
19 #include <asm/timex.h>
20 #include <linux/if_arcnet.h>
21
22 #ifdef __KERNEL__
23 #include <linux/irqreturn.h>
24
25 /*
26 * RECON_THRESHOLD is the maximum number of RECON messages to receive
27 * within one minute before printing a "cabling problem" warning. The
28 * default value should be fine.
29 *
30 * After that, a "cabling restored" message will be printed on the next IRQ
31 * if no RECON messages have been received for 10 seconds.
32 *
33 * Do not define RECON_THRESHOLD at all if you want to disable this feature.
34 */
35 #define RECON_THRESHOLD 30
36
37 /*
38 * Define this to the minimum "timeout" value. If a transmit takes longer
39 * than TX_TIMEOUT jiffies, Linux will abort the TX and retry. On a large
40 * network, or one with heavy network traffic, this timeout may need to be
41 * increased. The larger it is, though, the longer it will be between
42 * necessary transmits - don't set this too high.
43 */
44 #define TX_TIMEOUT (HZ * 200 / 1000)
45
46 /* Display warnings about the driver being an ALPHA version. */
47 #undef ALPHA_WARNING
48
49 /*
50 * Debugging bitflags: each option can be enabled individually.
51 *
52 * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
53 * actually be available. GCC will (at least, GCC 2.7.0 will) notice
54 * lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
55 * them out.
56 */
57 #define D_NORMAL 1 /* important operational info */
58 #define D_EXTRA 2 /* useful, but non-vital information */
59 #define D_INIT 4 /* show init/probe messages */
60 #define D_INIT_REASONS 8 /* show reasons for discarding probes */
61 #define D_RECON 32 /* print a message whenever token is lost */
62 #define D_PROTO 64 /* debug auto-protocol support */
63 /* debug levels below give LOTS of output during normal operation! */
64 #define D_DURING 128 /* trace operations (including irq's) */
65 #define D_TX 256 /* show tx packets */
66 #define D_RX 512 /* show rx packets */
67 #define D_SKB 1024 /* show skb's */
68 #define D_SKB_SIZE 2048 /* show skb sizes */
69 #define D_TIMING 4096 /* show time needed to copy buffers to card */
70 #define D_DEBUG 8192 /* Very detailed debug line for line */
71
72 #ifndef ARCNET_DEBUG_MAX
73 #define ARCNET_DEBUG_MAX (127) /* change to ~0 if you want detailed debugging */
74 #endif
75
76 #ifndef ARCNET_DEBUG
77 #define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
78 #endif
79 extern int arcnet_debug;
80
81 #define BUGLVL(x) ((x) & ARCNET_DEBUG_MAX & arcnet_debug)
82
83 /* macros to simplify debug checking */
84 #define arc_printk(x, dev, fmt, ...) \
85 do { \
86 if (BUGLVL(x)) { \
87 if ((x) == D_NORMAL) \
88 netdev_warn(dev, fmt, ##__VA_ARGS__); \
89 else if ((x) < D_DURING) \
90 netdev_info(dev, fmt, ##__VA_ARGS__); \
91 else \
92 netdev_dbg(dev, fmt, ##__VA_ARGS__); \
93 } \
94 } while (0)
95
96 #define arc_cont(x, fmt, ...) \
97 do { \
98 if (BUGLVL(x)) \
99 pr_cont(fmt, ##__VA_ARGS__); \
100 } while (0)
101
102 /* see how long a function call takes to run, expressed in CPU cycles */
103 #define TIME(dev, name, bytes, call) \
104 do { \
105 if (BUGLVL(D_TIMING)) { \
106 unsigned long _x, _y; \
107 _x = get_cycles(); \
108 call; \
109 _y = get_cycles(); \
110 arc_printk(D_TIMING, dev, \
111 "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \
112 name, bytes, _y - _x, \
113 100000000 / 1024 * bytes / (_y - _x + 1)); \
114 } else { \
115 call; \
116 } \
117 } while (0)
118
119 /*
120 * Time needed to reset the card - in ms (milliseconds). This works on my
121 * SMC PC100. I can't find a reference that tells me just how long I
122 * should wait.
123 */
124 #define RESETtime (300)
125
126 /*
127 * These are the max/min lengths of packet payload, not including the
128 * arc_hardware header, but definitely including the soft header.
129 *
130 * Note: packet sizes 254, 255, 256 are impossible because of the way
131 * ARCnet registers work That's why RFC1201 defines "exception" packets.
132 * In non-RFC1201 protocols, we have to just tack some extra bytes on the
133 * end.
134 */
135 #define MTU 253 /* normal packet max size */
136 #define MinTU 257 /* extended packet min size */
137 #define XMTU 508 /* extended packet max size */
138
139 /* status/interrupt mask bit fields */
140 #define TXFREEflag 0x01 /* transmitter available */
141 #define TXACKflag 0x02 /* transmitted msg. ackd */
142 #define RECONflag 0x04 /* network reconfigured */
143 #define TESTflag 0x08 /* test flag */
144 #define EXCNAKflag 0x08 /* excesive nak flag */
145 #define RESETflag 0x10 /* power-on-reset */
146 #define RES1flag 0x20 /* reserved - usually set by jumper */
147 #define RES2flag 0x40 /* reserved - usually set by jumper */
148 #define NORXflag 0x80 /* receiver inhibited */
149
150 /* Flags used for IO-mapped memory operations */
151 #define AUTOINCflag 0x40 /* Increase location with each access */
152 #define IOMAPflag 0x02 /* (for 90xx) Use IO mapped memory, not mmap */
153 #define ENABLE16flag 0x80 /* (for 90xx) Enable 16-bit mode */
154
155 /* in the command register, the following bits have these meanings:
156 * 0-2 command
157 * 3-4 page number (for enable rcv/xmt command)
158 * 7 receive broadcasts
159 */
160 #define NOTXcmd 0x01 /* disable transmitter */
161 #define NORXcmd 0x02 /* disable receiver */
162 #define TXcmd 0x03 /* enable transmitter */
163 #define RXcmd 0x04 /* enable receiver */
164 #define CONFIGcmd 0x05 /* define configuration */
165 #define CFLAGScmd 0x06 /* clear flags */
166 #define TESTcmd 0x07 /* load test flags */
167 #define STARTIOcmd 0x18 /* start internal operation */
168
169 /* flags for "clear flags" command */
170 #define RESETclear 0x08 /* power-on-reset */
171 #define CONFIGclear 0x10 /* system reconfigured */
172
173 #define EXCNAKclear 0x0E /* Clear and acknowledge the excive nak bit */
174
175 /* flags for "load test flags" command */
176 #define TESTload 0x08 /* test flag (diagnostic) */
177
178 /* byte deposited into first address of buffers on reset */
179 #define TESTvalue 0321 /* that's octal for 0xD1 :) */
180
181 /* for "enable receiver" command */
182 #define RXbcasts 0x80 /* receive broadcasts */
183
184 /* flags for "define configuration" command */
185 #define NORMALconf 0x00 /* 1-249 byte packets */
186 #define EXTconf 0x08 /* 250-504 byte packets */
187
188 /* card feature flags, set during auto-detection.
189 * (currently only used by com20020pci)
190 */
191 #define ARC_IS_5MBIT 1 /* card default speed is 5MBit */
192 #define ARC_CAN_10MBIT 2 /* card uses COM20022, supporting 10MBit,
193 but default is 2.5MBit. */
194
195 /* information needed to define an encapsulation driver */
196 struct ArcProto {
197 char suffix; /* a for RFC1201, e for ether-encap, etc. */
198 int mtu; /* largest possible packet */
199 int is_ip; /* This is a ip plugin - not a raw thing */
200
201 void (*rx)(struct net_device *dev, int bufnum,
202 struct archdr *pkthdr, int length);
203 int (*build_header)(struct sk_buff *skb, struct net_device *dev,
204 unsigned short ethproto, uint8_t daddr);
205
206 /* these functions return '1' if the skb can now be freed */
207 int (*prepare_tx)(struct net_device *dev, struct archdr *pkt,
208 int length, int bufnum);
209 int (*continue_tx)(struct net_device *dev, int bufnum);
210 int (*ack_tx)(struct net_device *dev, int acked);
211 };
212
213 extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
214 *arc_bcast_proto, *arc_raw_proto;
215
216 /*
217 * "Incoming" is information needed for each address that could be sending
218 * to us. Mostly for partially-received split packets.
219 */
220 struct Incoming {
221 struct sk_buff *skb; /* packet data buffer */
222 __be16 sequence; /* sequence number of assembly */
223 uint8_t lastpacket, /* number of last packet (from 1) */
224 numpackets; /* number of packets in split */
225 };
226
227 /* only needed for RFC1201 */
228 struct Outgoing {
229 struct ArcProto *proto; /* protocol driver that owns this:
230 * if NULL, no packet is pending.
231 */
232 struct sk_buff *skb; /* buffer from upper levels */
233 struct archdr *pkt; /* a pointer into the skb */
234 uint16_t length, /* bytes total */
235 dataleft, /* bytes left */
236 segnum, /* segment being sent */
237 numsegs; /* number of segments */
238 };
239
240 #define ARCNET_LED_NAME_SZ (IFNAMSIZ + 6)
241
242 struct arcnet_local {
243 uint8_t config, /* current value of CONFIG register */
244 timeout, /* Extended timeout for COM20020 */
245 backplane, /* Backplane flag for COM20020 */
246 clockp, /* COM20020 clock divider */
247 clockm, /* COM20020 clock multiplier flag */
248 setup, /* Contents of setup1 register */
249 setup2, /* Contents of setup2 register */
250 intmask; /* current value of INTMASK register */
251 uint8_t default_proto[256]; /* default encap to use for each host */
252 int cur_tx, /* buffer used by current transmit, or -1 */
253 next_tx, /* buffer where a packet is ready to send */
254 cur_rx; /* current receive buffer */
255 int lastload_dest, /* can last loaded packet be acked? */
256 lasttrans_dest; /* can last TX'd packet be acked? */
257 int timed_out; /* need to process TX timeout and drop packet */
258 unsigned long last_timeout; /* time of last reported timeout */
259 char *card_name; /* card ident string */
260 int card_flags; /* special card features */
261
262 /* On preemtive and SMB a lock is needed */
263 spinlock_t lock;
264
265 struct led_trigger *tx_led_trig;
266 char tx_led_trig_name[ARCNET_LED_NAME_SZ];
267 struct led_trigger *recon_led_trig;
268 char recon_led_trig_name[ARCNET_LED_NAME_SZ];
269
270 struct timer_list timer;
271
272 /*
273 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
274 * which can be used for either sending or receiving. The new dynamic
275 * buffer management routines use a simple circular queue of available
276 * buffers, and take them as they're needed. This way, we simplify
277 * situations in which we (for example) want to pre-load a transmit
278 * buffer, or start receiving while we copy a received packet to
279 * memory.
280 *
281 * The rules: only the interrupt handler is allowed to _add_ buffers to
282 * the queue; thus, this doesn't require a lock. Both the interrupt
283 * handler and the transmit function will want to _remove_ buffers, so
284 * we need to handle the situation where they try to do it at the same
285 * time.
286 *
287 * If next_buf == first_free_buf, the queue is empty. Since there are
288 * only four possible buffers, the queue should never be full.
289 */
290 atomic_t buf_lock;
291 int buf_queue[5];
292 int next_buf, first_free_buf;
293
294 /* network "reconfiguration" handling */
295 unsigned long first_recon; /* time of "first" RECON message to count */
296 unsigned long last_recon; /* time of most recent RECON */
297 int num_recons; /* number of RECONs between first and last. */
298 int network_down; /* do we think the network is down? */
299
300 int excnak_pending; /* We just got an excesive nak interrupt */
301
302 struct {
303 uint16_t sequence; /* sequence number (incs with each packet) */
304 __be16 aborted_seq;
305
306 struct Incoming incoming[256]; /* one from each address */
307 } rfc1201;
308
309 /* really only used by rfc1201, but we'll pretend it's not */
310 struct Outgoing outgoing; /* packet currently being sent */
311
312 /* hardware-specific functions */
313 struct {
314 struct module *owner;
315 void (*command)(struct net_device *dev, int cmd);
316 int (*status)(struct net_device *dev);
317 void (*intmask)(struct net_device *dev, int mask);
318 int (*reset)(struct net_device *dev, int really_reset);
319 void (*open)(struct net_device *dev);
320 void (*close)(struct net_device *dev);
321 void (*datatrigger) (struct net_device * dev, int enable);
322 void (*recontrigger) (struct net_device * dev, int enable);
323
324 void (*copy_to_card)(struct net_device *dev, int bufnum,
325 int offset, void *buf, int count);
326 void (*copy_from_card)(struct net_device *dev, int bufnum,
327 int offset, void *buf, int count);
328 } hw;
329
330 void __iomem *mem_start; /* pointer to ioremap'ed MMIO */
331 };
332
333 enum arcnet_led_event {
334 ARCNET_LED_EVENT_RECON,
335 ARCNET_LED_EVENT_OPEN,
336 ARCNET_LED_EVENT_STOP,
337 ARCNET_LED_EVENT_TX,
338 };
339
340 void arcnet_led_event(struct net_device *netdev, enum arcnet_led_event event);
341 void devm_arcnet_led_init(struct net_device *netdev, int index, int subid);
342
343 #if ARCNET_DEBUG_MAX & D_SKB
344 void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
345 #else
346 static inline
arcnet_dump_skb(struct net_device * dev,struct sk_buff * skb,char * desc)347 void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc)
348 {
349 }
350 #endif
351
352 void arcnet_unregister_proto(struct ArcProto *proto);
353 irqreturn_t arcnet_interrupt(int irq, void *dev_id);
354 struct net_device *alloc_arcdev(const char *name);
355
356 int arcnet_open(struct net_device *dev);
357 int arcnet_close(struct net_device *dev);
358 netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
359 struct net_device *dev);
360 void arcnet_timeout(struct net_device *dev);
361
362 /* I/O equivalents */
363
364 #ifdef CONFIG_SA1100_CT6001
365 #define BUS_ALIGN 2 /* 8 bit device on a 16 bit bus - needs padding */
366 #else
367 #define BUS_ALIGN 1
368 #endif
369
370 /* addr and offset allow register like names to define the actual IO address.
371 * A configuration option multiplies the offset for alignment.
372 */
373 #define arcnet_inb(addr, offset) \
374 inb((addr) + BUS_ALIGN * (offset))
375 #define arcnet_outb(value, addr, offset) \
376 outb(value, (addr) + BUS_ALIGN * (offset))
377
378 #define arcnet_insb(addr, offset, buffer, count) \
379 insb((addr) + BUS_ALIGN * (offset), buffer, count)
380 #define arcnet_outsb(addr, offset, buffer, count) \
381 outsb((addr) + BUS_ALIGN * (offset), buffer, count)
382
383 #define arcnet_readb(addr, offset) \
384 readb((addr) + (offset))
385 #define arcnet_writeb(value, addr, offset) \
386 writeb(value, (addr) + (offset))
387
388 #endif /* __KERNEL__ */
389 #endif /* _LINUX_ARCDEVICE_H */
390