1 /*
2 * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
3 * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
4 *
5 * Permission to use, copy, modify, and distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 *
17 */
18
19 /*************************************\
20 * DMA and interrupt masking functions *
21 \*************************************/
22
23 /**
24 * DOC: DMA and interrupt masking functions
25 *
26 * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
27 * handle queue setup for 5210 chipset (rest are handled on qcu.c).
28 * Also we setup interrupt mask register (IMR) and read the various interrupt
29 * status registers (ISR).
30 */
31
32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
33
34 #include "ath5k.h"
35 #include "reg.h"
36 #include "debug.h"
37
38
39 /*********\
40 * Receive *
41 \*********/
42
43 /**
44 * ath5k_hw_start_rx_dma() - Start DMA receive
45 * @ah: The &struct ath5k_hw
46 */
47 void
ath5k_hw_start_rx_dma(struct ath5k_hw * ah)48 ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
49 {
50 ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
51 ath5k_hw_reg_read(ah, AR5K_CR);
52 }
53
54 /**
55 * ath5k_hw_stop_rx_dma() - Stop DMA receive
56 * @ah: The &struct ath5k_hw
57 */
58 static int
ath5k_hw_stop_rx_dma(struct ath5k_hw * ah)59 ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
60 {
61 unsigned int i;
62
63 ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
64
65 /*
66 * It may take some time to disable the DMA receive unit
67 */
68 for (i = 1000; i > 0 &&
69 (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
70 i--)
71 udelay(100);
72
73 if (!i)
74 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
75 "failed to stop RX DMA !\n");
76
77 return i ? 0 : -EBUSY;
78 }
79
80 /**
81 * ath5k_hw_get_rxdp() - Get RX Descriptor's address
82 * @ah: The &struct ath5k_hw
83 */
84 u32
ath5k_hw_get_rxdp(struct ath5k_hw * ah)85 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
86 {
87 return ath5k_hw_reg_read(ah, AR5K_RXDP);
88 }
89
90 /**
91 * ath5k_hw_set_rxdp() - Set RX Descriptor's address
92 * @ah: The &struct ath5k_hw
93 * @phys_addr: RX descriptor address
94 *
95 * Returns -EIO if rx is active
96 */
97 int
ath5k_hw_set_rxdp(struct ath5k_hw * ah,u32 phys_addr)98 ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
99 {
100 if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) {
101 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
102 "tried to set RXDP while rx was active !\n");
103 return -EIO;
104 }
105
106 ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
107 return 0;
108 }
109
110
111 /**********\
112 * Transmit *
113 \**********/
114
115 /**
116 * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue
117 * @ah: The &struct ath5k_hw
118 * @queue: The hw queue number
119 *
120 * Start DMA transmit for a specific queue and since 5210 doesn't have
121 * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
122 * queue for normal data and one queue for beacons). For queue setup
123 * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
124 * of range or if queue is already disabled.
125 *
126 * NOTE: Must be called after setting up tx control descriptor for that
127 * queue (see below).
128 */
129 int
ath5k_hw_start_tx_dma(struct ath5k_hw * ah,unsigned int queue)130 ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
131 {
132 u32 tx_queue;
133
134 AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
135
136 /* Return if queue is declared inactive */
137 if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
138 return -EINVAL;
139
140 if (ah->ah_version == AR5K_AR5210) {
141 tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
142
143 /*
144 * Set the queue by type on 5210
145 */
146 switch (ah->ah_txq[queue].tqi_type) {
147 case AR5K_TX_QUEUE_DATA:
148 tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
149 break;
150 case AR5K_TX_QUEUE_BEACON:
151 tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
152 ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
153 AR5K_BSR);
154 break;
155 case AR5K_TX_QUEUE_CAB:
156 tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
157 ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
158 AR5K_BCR_BDMAE, AR5K_BSR);
159 break;
160 default:
161 return -EINVAL;
162 }
163 /* Start queue */
164 ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
165 ath5k_hw_reg_read(ah, AR5K_CR);
166 } else {
167 /* Return if queue is disabled */
168 if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
169 return -EIO;
170
171 /* Start queue */
172 AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
173 }
174
175 return 0;
176 }
177
178 /**
179 * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue
180 * @ah: The &struct ath5k_hw
181 * @queue: The hw queue number
182 *
183 * Stop DMA transmit on a specific hw queue and drain queue so we don't
184 * have any pending frames. Returns -EBUSY if we still have pending frames,
185 * -EINVAL if queue number is out of range or inactive.
186 */
187 static int
ath5k_hw_stop_tx_dma(struct ath5k_hw * ah,unsigned int queue)188 ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
189 {
190 unsigned int i = 40;
191 u32 tx_queue, pending;
192
193 AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
194
195 /* Return if queue is declared inactive */
196 if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
197 return -EINVAL;
198
199 if (ah->ah_version == AR5K_AR5210) {
200 tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
201
202 /*
203 * Set by queue type
204 */
205 switch (ah->ah_txq[queue].tqi_type) {
206 case AR5K_TX_QUEUE_DATA:
207 tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
208 break;
209 case AR5K_TX_QUEUE_BEACON:
210 case AR5K_TX_QUEUE_CAB:
211 /* XXX Fix me... */
212 tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
213 ath5k_hw_reg_write(ah, 0, AR5K_BSR);
214 break;
215 default:
216 return -EINVAL;
217 }
218
219 /* Stop queue */
220 ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
221 ath5k_hw_reg_read(ah, AR5K_CR);
222 } else {
223
224 /*
225 * Enable DCU early termination to quickly
226 * flush any pending frames from QCU
227 */
228 AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
229 AR5K_QCU_MISC_DCU_EARLY);
230
231 /*
232 * Schedule TX disable and wait until queue is empty
233 */
234 AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
235
236 /* Wait for queue to stop */
237 for (i = 1000; i > 0 &&
238 (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0);
239 i--)
240 udelay(100);
241
242 if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
243 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
244 "queue %i didn't stop !\n", queue);
245
246 /* Check for pending frames */
247 i = 1000;
248 do {
249 pending = ath5k_hw_reg_read(ah,
250 AR5K_QUEUE_STATUS(queue)) &
251 AR5K_QCU_STS_FRMPENDCNT;
252 udelay(100);
253 } while (--i && pending);
254
255 /* For 2413+ order PCU to drop packets using
256 * QUIET mechanism */
257 if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
258 pending) {
259 /* Set periodicity and duration */
260 ath5k_hw_reg_write(ah,
261 AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
262 AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
263 AR5K_QUIET_CTL2);
264
265 /* Enable quiet period for current TSF */
266 ath5k_hw_reg_write(ah,
267 AR5K_QUIET_CTL1_QT_EN |
268 AR5K_REG_SM(ath5k_hw_reg_read(ah,
269 AR5K_TSF_L32_5211) >> 10,
270 AR5K_QUIET_CTL1_NEXT_QT_TSF),
271 AR5K_QUIET_CTL1);
272
273 /* Force channel idle high */
274 AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
275 AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
276
277 /* Wait a while and disable mechanism */
278 udelay(400);
279 AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
280 AR5K_QUIET_CTL1_QT_EN);
281
282 /* Re-check for pending frames */
283 i = 100;
284 do {
285 pending = ath5k_hw_reg_read(ah,
286 AR5K_QUEUE_STATUS(queue)) &
287 AR5K_QCU_STS_FRMPENDCNT;
288 udelay(100);
289 } while (--i && pending);
290
291 AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
292 AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
293
294 if (pending)
295 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
296 "quiet mechanism didn't work q:%i !\n",
297 queue);
298 }
299
300 /*
301 * Disable DCU early termination
302 */
303 AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
304 AR5K_QCU_MISC_DCU_EARLY);
305
306 /* Clear register */
307 ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
308 if (pending) {
309 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
310 "tx dma didn't stop (q:%i, frm:%i) !\n",
311 queue, pending);
312 return -EBUSY;
313 }
314 }
315
316 /* TODO: Check for success on 5210 else return error */
317 return 0;
318 }
319
320 /**
321 * ath5k_hw_stop_beacon_queue() - Stop beacon queue
322 * @ah: The &struct ath5k_hw
323 * @queue: The queue number
324 *
325 * Returns -EIO if queue didn't stop
326 */
327 int
ath5k_hw_stop_beacon_queue(struct ath5k_hw * ah,unsigned int queue)328 ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
329 {
330 int ret;
331 ret = ath5k_hw_stop_tx_dma(ah, queue);
332 if (ret) {
333 ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
334 "beacon queue didn't stop !\n");
335 return -EIO;
336 }
337 return 0;
338 }
339
340 /**
341 * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue
342 * @ah: The &struct ath5k_hw
343 * @queue: The hw queue number
344 *
345 * Get TX descriptor's address for a specific queue. For 5210 we ignore
346 * the queue number and use tx queue type since we only have 2 queues.
347 * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
348 * For newer chips with QCU/DCU we just read the corresponding TXDP register.
349 *
350 * XXX: Is TXDP read and clear ?
351 */
352 u32
ath5k_hw_get_txdp(struct ath5k_hw * ah,unsigned int queue)353 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
354 {
355 u16 tx_reg;
356
357 AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
358
359 /*
360 * Get the transmit queue descriptor pointer from the selected queue
361 */
362 /*5210 doesn't have QCU*/
363 if (ah->ah_version == AR5K_AR5210) {
364 switch (ah->ah_txq[queue].tqi_type) {
365 case AR5K_TX_QUEUE_DATA:
366 tx_reg = AR5K_NOQCU_TXDP0;
367 break;
368 case AR5K_TX_QUEUE_BEACON:
369 case AR5K_TX_QUEUE_CAB:
370 tx_reg = AR5K_NOQCU_TXDP1;
371 break;
372 default:
373 return 0xffffffff;
374 }
375 } else {
376 tx_reg = AR5K_QUEUE_TXDP(queue);
377 }
378
379 return ath5k_hw_reg_read(ah, tx_reg);
380 }
381
382 /**
383 * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue
384 * @ah: The &struct ath5k_hw
385 * @queue: The hw queue number
386 * @phys_addr: The physical address
387 *
388 * Set TX descriptor's address for a specific queue. For 5210 we ignore
389 * the queue number and we use tx queue type since we only have 2 queues
390 * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
391 * For newer chips with QCU/DCU we just set the corresponding TXDP register.
392 * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
393 * active.
394 */
395 int
ath5k_hw_set_txdp(struct ath5k_hw * ah,unsigned int queue,u32 phys_addr)396 ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
397 {
398 u16 tx_reg;
399
400 AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
401
402 /*
403 * Set the transmit queue descriptor pointer register by type
404 * on 5210
405 */
406 if (ah->ah_version == AR5K_AR5210) {
407 switch (ah->ah_txq[queue].tqi_type) {
408 case AR5K_TX_QUEUE_DATA:
409 tx_reg = AR5K_NOQCU_TXDP0;
410 break;
411 case AR5K_TX_QUEUE_BEACON:
412 case AR5K_TX_QUEUE_CAB:
413 tx_reg = AR5K_NOQCU_TXDP1;
414 break;
415 default:
416 return -EINVAL;
417 }
418 } else {
419 /*
420 * Set the transmit queue descriptor pointer for
421 * the selected queue on QCU for 5211+
422 * (this won't work if the queue is still active)
423 */
424 if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
425 return -EIO;
426
427 tx_reg = AR5K_QUEUE_TXDP(queue);
428 }
429
430 /* Set descriptor pointer */
431 ath5k_hw_reg_write(ah, phys_addr, tx_reg);
432
433 return 0;
434 }
435
436 /**
437 * ath5k_hw_update_tx_triglevel() - Update tx trigger level
438 * @ah: The &struct ath5k_hw
439 * @increase: Flag to force increase of trigger level
440 *
441 * This function increases/decreases the tx trigger level for the tx fifo
442 * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
443 * the buffer and transmits its data. Lowering this results sending small
444 * frames more quickly but can lead to tx underruns, raising it a lot can
445 * result other problems. Right now we start with the lowest possible
446 * (64Bytes) and if we get tx underrun we increase it using the increase
447 * flag. Returns -EIO if we have reached maximum/minimum.
448 *
449 * XXX: Link this with tx DMA size ?
450 * XXX2: Use it to save interrupts ?
451 */
452 int
ath5k_hw_update_tx_triglevel(struct ath5k_hw * ah,bool increase)453 ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
454 {
455 u32 trigger_level, imr;
456 int ret = -EIO;
457
458 /*
459 * Disable interrupts by setting the mask
460 */
461 imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
462
463 trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
464 AR5K_TXCFG_TXFULL);
465
466 if (!increase) {
467 if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
468 goto done;
469 } else
470 trigger_level +=
471 ((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
472
473 /*
474 * Update trigger level on success
475 */
476 if (ah->ah_version == AR5K_AR5210)
477 ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
478 else
479 AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
480 AR5K_TXCFG_TXFULL, trigger_level);
481
482 ret = 0;
483
484 done:
485 /*
486 * Restore interrupt mask
487 */
488 ath5k_hw_set_imr(ah, imr);
489
490 return ret;
491 }
492
493
494 /*******************\
495 * Interrupt masking *
496 \*******************/
497
498 /**
499 * ath5k_hw_is_intr_pending() - Check if we have pending interrupts
500 * @ah: The &struct ath5k_hw
501 *
502 * Check if we have pending interrupts to process. Returns 1 if we
503 * have pending interrupts and 0 if we haven't.
504 */
505 bool
ath5k_hw_is_intr_pending(struct ath5k_hw * ah)506 ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
507 {
508 return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
509 }
510
511 /**
512 * ath5k_hw_get_isr() - Get interrupt status
513 * @ah: The @struct ath5k_hw
514 * @interrupt_mask: Driver's interrupt mask used to filter out
515 * interrupts in sw.
516 *
517 * This function is used inside our interrupt handler to determine the reason
518 * for the interrupt by reading Primary Interrupt Status Register. Returns an
519 * abstract interrupt status mask which is mostly ISR with some uncommon bits
520 * being mapped on some standard non hw-specific positions
521 * (check out &ath5k_int).
522 *
523 * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
524 * function gets called are cleared on return.
525 */
526 int
ath5k_hw_get_isr(struct ath5k_hw * ah,enum ath5k_int * interrupt_mask)527 ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
528 {
529 u32 data = 0;
530
531 /*
532 * Read interrupt status from Primary Interrupt
533 * Register.
534 *
535 * Note: PISR/SISR Not available on 5210
536 */
537 if (ah->ah_version == AR5K_AR5210) {
538 u32 isr = 0;
539 isr = ath5k_hw_reg_read(ah, AR5K_ISR);
540 if (unlikely(isr == AR5K_INT_NOCARD)) {
541 *interrupt_mask = isr;
542 return -ENODEV;
543 }
544
545 /*
546 * Filter out the non-common bits from the interrupt
547 * status.
548 */
549 *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
550
551 /* Hanlde INT_FATAL */
552 if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
553 | AR5K_ISR_DPERR)))
554 *interrupt_mask |= AR5K_INT_FATAL;
555
556 /*
557 * XXX: BMISS interrupts may occur after association.
558 * I found this on 5210 code but it needs testing. If this is
559 * true we should disable them before assoc and re-enable them
560 * after a successful assoc + some jiffies.
561 interrupt_mask &= ~AR5K_INT_BMISS;
562 */
563
564 data = isr;
565 } else {
566 u32 pisr = 0;
567 u32 pisr_clear = 0;
568 u32 sisr0 = 0;
569 u32 sisr1 = 0;
570 u32 sisr2 = 0;
571 u32 sisr3 = 0;
572 u32 sisr4 = 0;
573
574 /* Read PISR and SISRs... */
575 pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
576 if (unlikely(pisr == AR5K_INT_NOCARD)) {
577 *interrupt_mask = pisr;
578 return -ENODEV;
579 }
580
581 sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
582 sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
583 sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
584 sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
585 sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
586
587 /*
588 * PISR holds the logical OR of interrupt bits
589 * from SISR registers:
590 *
591 * TXOK and TXDESC -> Logical OR of TXOK and TXDESC
592 * per-queue bits on SISR0
593 *
594 * TXERR and TXEOL -> Logical OR of TXERR and TXEOL
595 * per-queue bits on SISR1
596 *
597 * TXURN -> Logical OR of TXURN per-queue bits on SISR2
598 *
599 * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
600 *
601 * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
602 * BCN_TIMEOUT, CAB_TIMEOUT and DTIM
603 * (and TSFOOR ?) bits on SISR2
604 *
605 * QCBRORN and QCBRURN -> Logical OR of QCBRORN and
606 * QCBRURN per-queue bits on SISR3
607 * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
608 *
609 * If we clean these bits on PISR we 'll also clear all
610 * related bits from SISRs, e.g. if we write the TXOK bit on
611 * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
612 * interrupt got fired for another queue while we were reading
613 * the interrupt registers and we write back the TXOK bit on
614 * PISR we 'll lose it. So make sure that we don't write back
615 * on PISR any bits that come from SISRs. Clearing them from
616 * SISRs will also clear PISR so no need to worry here.
617 */
618
619 /* XXX: There seems to be an issue on some cards
620 * with tx interrupt flags not being updated
621 * on PISR despite that all Tx interrupt bits
622 * are cleared on SISRs. Since we handle all
623 * Tx queues all together it shouldn't be an
624 * issue if we clear Tx interrupt flags also
625 * on PISR to avoid that.
626 */
627 pisr_clear = (pisr & ~AR5K_ISR_BITS_FROM_SISRS) |
628 (pisr & AR5K_INT_TX_ALL);
629
630 /*
631 * Write to clear them...
632 * Note: This means that each bit we write back
633 * to the registers will get cleared, leaving the
634 * rest unaffected. So this won't affect new interrupts
635 * we didn't catch while reading/processing, we 'll get
636 * them next time get_isr gets called.
637 */
638 ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
639 ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
640 ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
641 ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
642 ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
643 ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
644 /* Flush previous write */
645 ath5k_hw_reg_read(ah, AR5K_PISR);
646
647 /*
648 * Filter out the non-common bits from the interrupt
649 * status.
650 */
651 *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
652
653
654 /* We treat TXOK,TXDESC, TXERR and TXEOL
655 * the same way (schedule the tx tasklet)
656 * so we track them all together per queue */
657 if (pisr & AR5K_ISR_TXOK)
658 ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
659 AR5K_SISR0_QCU_TXOK);
660
661 if (pisr & AR5K_ISR_TXDESC)
662 ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
663 AR5K_SISR0_QCU_TXDESC);
664
665 if (pisr & AR5K_ISR_TXERR)
666 ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
667 AR5K_SISR1_QCU_TXERR);
668
669 if (pisr & AR5K_ISR_TXEOL)
670 ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
671 AR5K_SISR1_QCU_TXEOL);
672
673 /* Currently this is not much useful since we treat
674 * all queues the same way if we get a TXURN (update
675 * tx trigger level) but we might need it later on*/
676 if (pisr & AR5K_ISR_TXURN)
677 ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2,
678 AR5K_SISR2_QCU_TXURN);
679
680 /* Misc Beacon related interrupts */
681
682 /* For AR5211 */
683 if (pisr & AR5K_ISR_TIM)
684 *interrupt_mask |= AR5K_INT_TIM;
685
686 /* For AR5212+ */
687 if (pisr & AR5K_ISR_BCNMISC) {
688 if (sisr2 & AR5K_SISR2_TIM)
689 *interrupt_mask |= AR5K_INT_TIM;
690 if (sisr2 & AR5K_SISR2_DTIM)
691 *interrupt_mask |= AR5K_INT_DTIM;
692 if (sisr2 & AR5K_SISR2_DTIM_SYNC)
693 *interrupt_mask |= AR5K_INT_DTIM_SYNC;
694 if (sisr2 & AR5K_SISR2_BCN_TIMEOUT)
695 *interrupt_mask |= AR5K_INT_BCN_TIMEOUT;
696 if (sisr2 & AR5K_SISR2_CAB_TIMEOUT)
697 *interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
698 }
699
700 /* Below interrupts are unlikely to happen */
701
702 /* HIU = Host Interface Unit (PCI etc)
703 * Can be one of MCABT, SSERR, DPERR from SISR2 */
704 if (unlikely(pisr & (AR5K_ISR_HIUERR)))
705 *interrupt_mask |= AR5K_INT_FATAL;
706
707 /*Beacon Not Ready*/
708 if (unlikely(pisr & (AR5K_ISR_BNR)))
709 *interrupt_mask |= AR5K_INT_BNR;
710
711 /* A queue got CBR overrun */
712 if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
713 *interrupt_mask |= AR5K_INT_QCBRORN;
714 ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
715 AR5K_SISR3_QCBRORN);
716 }
717
718 /* A queue got CBR underrun */
719 if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
720 *interrupt_mask |= AR5K_INT_QCBRURN;
721 ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
722 AR5K_SISR3_QCBRURN);
723 }
724
725 /* A queue got triggered */
726 if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
727 *interrupt_mask |= AR5K_INT_QTRIG;
728 ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
729 AR5K_SISR4_QTRIG);
730 }
731
732 data = pisr;
733 }
734
735 /*
736 * In case we didn't handle anything,
737 * print the register value.
738 */
739 if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
740 ATH5K_PRINTF("ISR: 0x%08x IMR: 0x%08x\n", data, ah->ah_imr);
741
742 return 0;
743 }
744
745 /**
746 * ath5k_hw_set_imr() - Set interrupt mask
747 * @ah: The &struct ath5k_hw
748 * @new_mask: The new interrupt mask to be set
749 *
750 * Set the interrupt mask in hw to save interrupts. We do that by mapping
751 * ath5k_int bits to hw-specific bits to remove abstraction and writing
752 * Interrupt Mask Register.
753 */
754 enum ath5k_int
ath5k_hw_set_imr(struct ath5k_hw * ah,enum ath5k_int new_mask)755 ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
756 {
757 enum ath5k_int old_mask, int_mask;
758
759 old_mask = ah->ah_imr;
760
761 /*
762 * Disable card interrupts to prevent any race conditions
763 * (they will be re-enabled afterwards if AR5K_INT GLOBAL
764 * is set again on the new mask).
765 */
766 if (old_mask & AR5K_INT_GLOBAL) {
767 ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
768 ath5k_hw_reg_read(ah, AR5K_IER);
769 }
770
771 /*
772 * Add additional, chipset-dependent interrupt mask flags
773 * and write them to the IMR (interrupt mask register).
774 */
775 int_mask = new_mask & AR5K_INT_COMMON;
776
777 if (ah->ah_version != AR5K_AR5210) {
778 /* Preserve per queue TXURN interrupt mask */
779 u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
780 & AR5K_SIMR2_QCU_TXURN;
781
782 /* Fatal interrupt abstraction for 5211+ */
783 if (new_mask & AR5K_INT_FATAL) {
784 int_mask |= AR5K_IMR_HIUERR;
785 simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
786 | AR5K_SIMR2_DPERR);
787 }
788
789 /* Misc beacon related interrupts */
790 if (new_mask & AR5K_INT_TIM)
791 int_mask |= AR5K_IMR_TIM;
792
793 if (new_mask & AR5K_INT_TIM)
794 simr2 |= AR5K_SISR2_TIM;
795 if (new_mask & AR5K_INT_DTIM)
796 simr2 |= AR5K_SISR2_DTIM;
797 if (new_mask & AR5K_INT_DTIM_SYNC)
798 simr2 |= AR5K_SISR2_DTIM_SYNC;
799 if (new_mask & AR5K_INT_BCN_TIMEOUT)
800 simr2 |= AR5K_SISR2_BCN_TIMEOUT;
801 if (new_mask & AR5K_INT_CAB_TIMEOUT)
802 simr2 |= AR5K_SISR2_CAB_TIMEOUT;
803
804 /*Beacon Not Ready*/
805 if (new_mask & AR5K_INT_BNR)
806 int_mask |= AR5K_INT_BNR;
807
808 /* Note: Per queue interrupt masks
809 * are set via ath5k_hw_reset_tx_queue() (qcu.c) */
810 ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
811 ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
812
813 } else {
814 /* Fatal interrupt abstraction for 5210 */
815 if (new_mask & AR5K_INT_FATAL)
816 int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
817 | AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
818
819 /* Only common interrupts left for 5210 (no SIMRs) */
820 ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
821 }
822
823 /* If RXNOFRM interrupt is masked disable it
824 * by setting AR5K_RXNOFRM to zero */
825 if (!(new_mask & AR5K_INT_RXNOFRM))
826 ath5k_hw_reg_write(ah, 0, AR5K_RXNOFRM);
827
828 /* Store new interrupt mask */
829 ah->ah_imr = new_mask;
830
831 /* ..re-enable interrupts if AR5K_INT_GLOBAL is set */
832 if (new_mask & AR5K_INT_GLOBAL) {
833 ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
834 ath5k_hw_reg_read(ah, AR5K_IER);
835 }
836
837 return old_mask;
838 }
839
840
841 /********************\
842 Init/Stop functions
843 \********************/
844
845 /**
846 * ath5k_hw_dma_init() - Initialize DMA unit
847 * @ah: The &struct ath5k_hw
848 *
849 * Set DMA size and pre-enable interrupts
850 * (driver handles tx/rx buffer setup and
851 * dma start/stop)
852 *
853 * XXX: Save/restore RXDP/TXDP registers ?
854 */
855 void
ath5k_hw_dma_init(struct ath5k_hw * ah)856 ath5k_hw_dma_init(struct ath5k_hw *ah)
857 {
858 /*
859 * Set Rx/Tx DMA Configuration
860 *
861 * Set standard DMA size (128). Note that
862 * a DMA size of 512 causes rx overruns and tx errors
863 * on pci-e cards (tested on 5424 but since rx overruns
864 * also occur on 5416/5418 with madwifi we set 128
865 * for all PCI-E cards to be safe).
866 *
867 * XXX: need to check 5210 for this
868 * TODO: Check out tx trigger level, it's always 64 on dumps but I
869 * guess we can tweak it and see how it goes ;-)
870 */
871 if (ah->ah_version != AR5K_AR5210) {
872 AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
873 AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
874 AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
875 AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
876 }
877
878 /* Pre-enable interrupts on 5211/5212*/
879 if (ah->ah_version != AR5K_AR5210)
880 ath5k_hw_set_imr(ah, ah->ah_imr);
881
882 }
883
884 /**
885 * ath5k_hw_dma_stop() - stop DMA unit
886 * @ah: The &struct ath5k_hw
887 *
888 * Stop tx/rx DMA and interrupts. Returns
889 * -EBUSY if tx or rx dma failed to stop.
890 *
891 * XXX: Sometimes DMA unit hangs and we have
892 * stuck frames on tx queues, only a reset
893 * can fix that.
894 */
895 int
ath5k_hw_dma_stop(struct ath5k_hw * ah)896 ath5k_hw_dma_stop(struct ath5k_hw *ah)
897 {
898 int i, qmax, err;
899 err = 0;
900
901 /* Disable interrupts */
902 ath5k_hw_set_imr(ah, 0);
903
904 /* Stop rx dma */
905 err = ath5k_hw_stop_rx_dma(ah);
906 if (err)
907 return err;
908
909 /* Clear any pending interrupts
910 * and disable tx dma */
911 if (ah->ah_version != AR5K_AR5210) {
912 ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
913 qmax = AR5K_NUM_TX_QUEUES;
914 } else {
915 /* PISR/SISR Not available on 5210 */
916 ath5k_hw_reg_read(ah, AR5K_ISR);
917 qmax = AR5K_NUM_TX_QUEUES_NOQCU;
918 }
919
920 for (i = 0; i < qmax; i++) {
921 err = ath5k_hw_stop_tx_dma(ah, i);
922 /* -EINVAL -> queue inactive */
923 if (err && err != -EINVAL)
924 return err;
925 }
926
927 return 0;
928 }
929