1 /*
2 * Copyright 2014 IBM Corp.
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version
7 * 2 of the License, or (at your option) any later version.
8 */
9
10 #include <linux/pci_regs.h>
11 #include <linux/pci_ids.h>
12 #include <linux/device.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/slab.h>
16 #include <linux/sort.h>
17 #include <linux/pci.h>
18 #include <linux/of.h>
19 #include <linux/delay.h>
20 #include <asm/opal.h>
21 #include <asm/msi_bitmap.h>
22 #include <asm/pnv-pci.h>
23 #include <asm/io.h>
24 #include <asm/reg.h>
25
26 #include "cxl.h"
27 #include <misc/cxl.h>
28
29
30 #define CXL_PCI_VSEC_ID 0x1280
31 #define CXL_VSEC_MIN_SIZE 0x80
32
33 #define CXL_READ_VSEC_LENGTH(dev, vsec, dest) \
34 { \
35 pci_read_config_word(dev, vsec + 0x6, dest); \
36 *dest >>= 4; \
37 }
38 #define CXL_READ_VSEC_NAFUS(dev, vsec, dest) \
39 pci_read_config_byte(dev, vsec + 0x8, dest)
40
41 #define CXL_READ_VSEC_STATUS(dev, vsec, dest) \
42 pci_read_config_byte(dev, vsec + 0x9, dest)
43 #define CXL_STATUS_SECOND_PORT 0x80
44 #define CXL_STATUS_MSI_X_FULL 0x40
45 #define CXL_STATUS_MSI_X_SINGLE 0x20
46 #define CXL_STATUS_FLASH_RW 0x08
47 #define CXL_STATUS_FLASH_RO 0x04
48 #define CXL_STATUS_LOADABLE_AFU 0x02
49 #define CXL_STATUS_LOADABLE_PSL 0x01
50 /* If we see these features we won't try to use the card */
51 #define CXL_UNSUPPORTED_FEATURES \
52 (CXL_STATUS_MSI_X_FULL | CXL_STATUS_MSI_X_SINGLE)
53
54 #define CXL_READ_VSEC_MODE_CONTROL(dev, vsec, dest) \
55 pci_read_config_byte(dev, vsec + 0xa, dest)
56 #define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
57 pci_write_config_byte(dev, vsec + 0xa, val)
58 #define CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, vsec, val) \
59 pci_bus_write_config_byte(bus, devfn, vsec + 0xa, val)
60 #define CXL_VSEC_PROTOCOL_MASK 0xe0
61 #define CXL_VSEC_PROTOCOL_1024TB 0x80
62 #define CXL_VSEC_PROTOCOL_512TB 0x40
63 #define CXL_VSEC_PROTOCOL_256TB 0x20 /* Power 8 uses this */
64 #define CXL_VSEC_PROTOCOL_ENABLE 0x01
65
66 #define CXL_READ_VSEC_PSL_REVISION(dev, vsec, dest) \
67 pci_read_config_word(dev, vsec + 0xc, dest)
68 #define CXL_READ_VSEC_CAIA_MINOR(dev, vsec, dest) \
69 pci_read_config_byte(dev, vsec + 0xe, dest)
70 #define CXL_READ_VSEC_CAIA_MAJOR(dev, vsec, dest) \
71 pci_read_config_byte(dev, vsec + 0xf, dest)
72 #define CXL_READ_VSEC_BASE_IMAGE(dev, vsec, dest) \
73 pci_read_config_word(dev, vsec + 0x10, dest)
74
75 #define CXL_READ_VSEC_IMAGE_STATE(dev, vsec, dest) \
76 pci_read_config_byte(dev, vsec + 0x13, dest)
77 #define CXL_WRITE_VSEC_IMAGE_STATE(dev, vsec, val) \
78 pci_write_config_byte(dev, vsec + 0x13, val)
79 #define CXL_VSEC_USER_IMAGE_LOADED 0x80 /* RO */
80 #define CXL_VSEC_PERST_LOADS_IMAGE 0x20 /* RW */
81 #define CXL_VSEC_PERST_SELECT_USER 0x10 /* RW */
82
83 #define CXL_READ_VSEC_AFU_DESC_OFF(dev, vsec, dest) \
84 pci_read_config_dword(dev, vsec + 0x20, dest)
85 #define CXL_READ_VSEC_AFU_DESC_SIZE(dev, vsec, dest) \
86 pci_read_config_dword(dev, vsec + 0x24, dest)
87 #define CXL_READ_VSEC_PS_OFF(dev, vsec, dest) \
88 pci_read_config_dword(dev, vsec + 0x28, dest)
89 #define CXL_READ_VSEC_PS_SIZE(dev, vsec, dest) \
90 pci_read_config_dword(dev, vsec + 0x2c, dest)
91
92
93 /* This works a little different than the p1/p2 register accesses to make it
94 * easier to pull out individual fields */
95 #define AFUD_READ(afu, off) in_be64(afu->native->afu_desc_mmio + off)
96 #define AFUD_READ_LE(afu, off) in_le64(afu->native->afu_desc_mmio + off)
97 #define EXTRACT_PPC_BIT(val, bit) (!!(val & PPC_BIT(bit)))
98 #define EXTRACT_PPC_BITS(val, bs, be) ((val & PPC_BITMASK(bs, be)) >> PPC_BITLSHIFT(be))
99
100 #define AFUD_READ_INFO(afu) AFUD_READ(afu, 0x0)
101 #define AFUD_NUM_INTS_PER_PROC(val) EXTRACT_PPC_BITS(val, 0, 15)
102 #define AFUD_NUM_PROCS(val) EXTRACT_PPC_BITS(val, 16, 31)
103 #define AFUD_NUM_CRS(val) EXTRACT_PPC_BITS(val, 32, 47)
104 #define AFUD_MULTIMODE(val) EXTRACT_PPC_BIT(val, 48)
105 #define AFUD_PUSH_BLOCK_TRANSFER(val) EXTRACT_PPC_BIT(val, 55)
106 #define AFUD_DEDICATED_PROCESS(val) EXTRACT_PPC_BIT(val, 59)
107 #define AFUD_AFU_DIRECTED(val) EXTRACT_PPC_BIT(val, 61)
108 #define AFUD_TIME_SLICED(val) EXTRACT_PPC_BIT(val, 63)
109 #define AFUD_READ_CR(afu) AFUD_READ(afu, 0x20)
110 #define AFUD_CR_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
111 #define AFUD_READ_CR_OFF(afu) AFUD_READ(afu, 0x28)
112 #define AFUD_READ_PPPSA(afu) AFUD_READ(afu, 0x30)
113 #define AFUD_PPPSA_PP(val) EXTRACT_PPC_BIT(val, 6)
114 #define AFUD_PPPSA_PSA(val) EXTRACT_PPC_BIT(val, 7)
115 #define AFUD_PPPSA_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
116 #define AFUD_READ_PPPSA_OFF(afu) AFUD_READ(afu, 0x38)
117 #define AFUD_READ_EB(afu) AFUD_READ(afu, 0x40)
118 #define AFUD_EB_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
119 #define AFUD_READ_EB_OFF(afu) AFUD_READ(afu, 0x48)
120
121 static const struct pci_device_id cxl_pci_tbl[] = {
122 { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), },
123 { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), },
124 { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x04cf), },
125 { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0601), },
126 { PCI_DEVICE_CLASS(0x120000, ~0), },
127
128 { }
129 };
130 MODULE_DEVICE_TABLE(pci, cxl_pci_tbl);
131
132
133 /*
134 * Mostly using these wrappers to avoid confusion:
135 * priv 1 is BAR2, while priv 2 is BAR0
136 */
p1_base(struct pci_dev * dev)137 static inline resource_size_t p1_base(struct pci_dev *dev)
138 {
139 return pci_resource_start(dev, 2);
140 }
141
p1_size(struct pci_dev * dev)142 static inline resource_size_t p1_size(struct pci_dev *dev)
143 {
144 return pci_resource_len(dev, 2);
145 }
146
p2_base(struct pci_dev * dev)147 static inline resource_size_t p2_base(struct pci_dev *dev)
148 {
149 return pci_resource_start(dev, 0);
150 }
151
p2_size(struct pci_dev * dev)152 static inline resource_size_t p2_size(struct pci_dev *dev)
153 {
154 return pci_resource_len(dev, 0);
155 }
156
find_cxl_vsec(struct pci_dev * dev)157 static int find_cxl_vsec(struct pci_dev *dev)
158 {
159 int vsec = 0;
160 u16 val;
161
162 while ((vsec = pci_find_next_ext_capability(dev, vsec, PCI_EXT_CAP_ID_VNDR))) {
163 pci_read_config_word(dev, vsec + 0x4, &val);
164 if (val == CXL_PCI_VSEC_ID)
165 return vsec;
166 }
167 return 0;
168
169 }
170
dump_cxl_config_space(struct pci_dev * dev)171 static void dump_cxl_config_space(struct pci_dev *dev)
172 {
173 int vsec;
174 u32 val;
175
176 dev_info(&dev->dev, "dump_cxl_config_space\n");
177
178 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &val);
179 dev_info(&dev->dev, "BAR0: %#.8x\n", val);
180 pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &val);
181 dev_info(&dev->dev, "BAR1: %#.8x\n", val);
182 pci_read_config_dword(dev, PCI_BASE_ADDRESS_2, &val);
183 dev_info(&dev->dev, "BAR2: %#.8x\n", val);
184 pci_read_config_dword(dev, PCI_BASE_ADDRESS_3, &val);
185 dev_info(&dev->dev, "BAR3: %#.8x\n", val);
186 pci_read_config_dword(dev, PCI_BASE_ADDRESS_4, &val);
187 dev_info(&dev->dev, "BAR4: %#.8x\n", val);
188 pci_read_config_dword(dev, PCI_BASE_ADDRESS_5, &val);
189 dev_info(&dev->dev, "BAR5: %#.8x\n", val);
190
191 dev_info(&dev->dev, "p1 regs: %#llx, len: %#llx\n",
192 p1_base(dev), p1_size(dev));
193 dev_info(&dev->dev, "p2 regs: %#llx, len: %#llx\n",
194 p2_base(dev), p2_size(dev));
195 dev_info(&dev->dev, "BAR 4/5: %#llx, len: %#llx\n",
196 pci_resource_start(dev, 4), pci_resource_len(dev, 4));
197
198 if (!(vsec = find_cxl_vsec(dev)))
199 return;
200
201 #define show_reg(name, what) \
202 dev_info(&dev->dev, "cxl vsec: %30s: %#x\n", name, what)
203
204 pci_read_config_dword(dev, vsec + 0x0, &val);
205 show_reg("Cap ID", (val >> 0) & 0xffff);
206 show_reg("Cap Ver", (val >> 16) & 0xf);
207 show_reg("Next Cap Ptr", (val >> 20) & 0xfff);
208 pci_read_config_dword(dev, vsec + 0x4, &val);
209 show_reg("VSEC ID", (val >> 0) & 0xffff);
210 show_reg("VSEC Rev", (val >> 16) & 0xf);
211 show_reg("VSEC Length", (val >> 20) & 0xfff);
212 pci_read_config_dword(dev, vsec + 0x8, &val);
213 show_reg("Num AFUs", (val >> 0) & 0xff);
214 show_reg("Status", (val >> 8) & 0xff);
215 show_reg("Mode Control", (val >> 16) & 0xff);
216 show_reg("Reserved", (val >> 24) & 0xff);
217 pci_read_config_dword(dev, vsec + 0xc, &val);
218 show_reg("PSL Rev", (val >> 0) & 0xffff);
219 show_reg("CAIA Ver", (val >> 16) & 0xffff);
220 pci_read_config_dword(dev, vsec + 0x10, &val);
221 show_reg("Base Image Rev", (val >> 0) & 0xffff);
222 show_reg("Reserved", (val >> 16) & 0x0fff);
223 show_reg("Image Control", (val >> 28) & 0x3);
224 show_reg("Reserved", (val >> 30) & 0x1);
225 show_reg("Image Loaded", (val >> 31) & 0x1);
226
227 pci_read_config_dword(dev, vsec + 0x14, &val);
228 show_reg("Reserved", val);
229 pci_read_config_dword(dev, vsec + 0x18, &val);
230 show_reg("Reserved", val);
231 pci_read_config_dword(dev, vsec + 0x1c, &val);
232 show_reg("Reserved", val);
233
234 pci_read_config_dword(dev, vsec + 0x20, &val);
235 show_reg("AFU Descriptor Offset", val);
236 pci_read_config_dword(dev, vsec + 0x24, &val);
237 show_reg("AFU Descriptor Size", val);
238 pci_read_config_dword(dev, vsec + 0x28, &val);
239 show_reg("Problem State Offset", val);
240 pci_read_config_dword(dev, vsec + 0x2c, &val);
241 show_reg("Problem State Size", val);
242
243 pci_read_config_dword(dev, vsec + 0x30, &val);
244 show_reg("Reserved", val);
245 pci_read_config_dword(dev, vsec + 0x34, &val);
246 show_reg("Reserved", val);
247 pci_read_config_dword(dev, vsec + 0x38, &val);
248 show_reg("Reserved", val);
249 pci_read_config_dword(dev, vsec + 0x3c, &val);
250 show_reg("Reserved", val);
251
252 pci_read_config_dword(dev, vsec + 0x40, &val);
253 show_reg("PSL Programming Port", val);
254 pci_read_config_dword(dev, vsec + 0x44, &val);
255 show_reg("PSL Programming Control", val);
256
257 pci_read_config_dword(dev, vsec + 0x48, &val);
258 show_reg("Reserved", val);
259 pci_read_config_dword(dev, vsec + 0x4c, &val);
260 show_reg("Reserved", val);
261
262 pci_read_config_dword(dev, vsec + 0x50, &val);
263 show_reg("Flash Address Register", val);
264 pci_read_config_dword(dev, vsec + 0x54, &val);
265 show_reg("Flash Size Register", val);
266 pci_read_config_dword(dev, vsec + 0x58, &val);
267 show_reg("Flash Status/Control Register", val);
268 pci_read_config_dword(dev, vsec + 0x58, &val);
269 show_reg("Flash Data Port", val);
270
271 #undef show_reg
272 }
273
dump_afu_descriptor(struct cxl_afu * afu)274 static void dump_afu_descriptor(struct cxl_afu *afu)
275 {
276 u64 val, afu_cr_num, afu_cr_off, afu_cr_len;
277 int i;
278
279 #define show_reg(name, what) \
280 dev_info(&afu->dev, "afu desc: %30s: %#llx\n", name, what)
281
282 val = AFUD_READ_INFO(afu);
283 show_reg("num_ints_per_process", AFUD_NUM_INTS_PER_PROC(val));
284 show_reg("num_of_processes", AFUD_NUM_PROCS(val));
285 show_reg("num_of_afu_CRs", AFUD_NUM_CRS(val));
286 show_reg("req_prog_mode", val & 0xffffULL);
287 afu_cr_num = AFUD_NUM_CRS(val);
288
289 val = AFUD_READ(afu, 0x8);
290 show_reg("Reserved", val);
291 val = AFUD_READ(afu, 0x10);
292 show_reg("Reserved", val);
293 val = AFUD_READ(afu, 0x18);
294 show_reg("Reserved", val);
295
296 val = AFUD_READ_CR(afu);
297 show_reg("Reserved", (val >> (63-7)) & 0xff);
298 show_reg("AFU_CR_len", AFUD_CR_LEN(val));
299 afu_cr_len = AFUD_CR_LEN(val) * 256;
300
301 val = AFUD_READ_CR_OFF(afu);
302 afu_cr_off = val;
303 show_reg("AFU_CR_offset", val);
304
305 val = AFUD_READ_PPPSA(afu);
306 show_reg("PerProcessPSA_control", (val >> (63-7)) & 0xff);
307 show_reg("PerProcessPSA Length", AFUD_PPPSA_LEN(val));
308
309 val = AFUD_READ_PPPSA_OFF(afu);
310 show_reg("PerProcessPSA_offset", val);
311
312 val = AFUD_READ_EB(afu);
313 show_reg("Reserved", (val >> (63-7)) & 0xff);
314 show_reg("AFU_EB_len", AFUD_EB_LEN(val));
315
316 val = AFUD_READ_EB_OFF(afu);
317 show_reg("AFU_EB_offset", val);
318
319 for (i = 0; i < afu_cr_num; i++) {
320 val = AFUD_READ_LE(afu, afu_cr_off + i * afu_cr_len);
321 show_reg("CR Vendor", val & 0xffff);
322 show_reg("CR Device", (val >> 16) & 0xffff);
323 }
324 #undef show_reg
325 }
326
327 #define CAPP_UNIT0_ID 0xBA
328 #define CAPP_UNIT1_ID 0XBE
329
get_capp_unit_id(struct device_node * np)330 static u64 get_capp_unit_id(struct device_node *np)
331 {
332 u32 phb_index;
333
334 /*
335 * For chips other than POWER8NVL, we only have CAPP 0,
336 * irrespective of which PHB is used.
337 */
338 if (!pvr_version_is(PVR_POWER8NVL))
339 return CAPP_UNIT0_ID;
340
341 /*
342 * For POWER8NVL, assume CAPP 0 is attached to PHB0 and
343 * CAPP 1 is attached to PHB1.
344 */
345 if (of_property_read_u32(np, "ibm,phb-index", &phb_index))
346 return 0;
347
348 if (phb_index == 0)
349 return CAPP_UNIT0_ID;
350
351 if (phb_index == 1)
352 return CAPP_UNIT1_ID;
353
354 return 0;
355 }
356
calc_capp_routing(struct pci_dev * dev,u64 * chipid,u64 * capp_unit_id)357 static int calc_capp_routing(struct pci_dev *dev, u64 *chipid, u64 *capp_unit_id)
358 {
359 struct device_node *np;
360 const __be32 *prop;
361
362 if (!(np = pnv_pci_get_phb_node(dev)))
363 return -ENODEV;
364
365 while (np && !(prop = of_get_property(np, "ibm,chip-id", NULL)))
366 np = of_get_next_parent(np);
367 if (!np)
368 return -ENODEV;
369 *chipid = be32_to_cpup(prop);
370 *capp_unit_id = get_capp_unit_id(np);
371 of_node_put(np);
372 if (!*capp_unit_id) {
373 pr_err("cxl: invalid capp unit id\n");
374 return -ENODEV;
375 }
376
377 return 0;
378 }
379
init_implementation_adapter_psl_regs(struct cxl * adapter,struct pci_dev * dev)380 static int init_implementation_adapter_psl_regs(struct cxl *adapter, struct pci_dev *dev)
381 {
382 u64 psl_dsnctl, psl_fircntl;
383 u64 chipid;
384 u64 capp_unit_id;
385 int rc;
386
387 rc = calc_capp_routing(dev, &chipid, &capp_unit_id);
388 if (rc)
389 return rc;
390
391 psl_dsnctl = 0x0000900000000000ULL; /* pteupd ttype, scdone */
392 psl_dsnctl |= (0x2ULL << (63-38)); /* MMIO hang pulse: 256 us */
393 /* Tell PSL where to route data to */
394 psl_dsnctl |= (chipid << (63-5));
395 psl_dsnctl |= (capp_unit_id << (63-13));
396
397 cxl_p1_write(adapter, CXL_PSL_DSNDCTL, psl_dsnctl);
398 cxl_p1_write(adapter, CXL_PSL_RESLCKTO, 0x20000000200ULL);
399 /* snoop write mask */
400 cxl_p1_write(adapter, CXL_PSL_SNWRALLOC, 0x00000000FFFFFFFFULL);
401 /* set fir_cntl to recommended value for production env */
402 psl_fircntl = (0x2ULL << (63-3)); /* ce_report */
403 psl_fircntl |= (0x1ULL << (63-6)); /* FIR_report */
404 psl_fircntl |= 0x1ULL; /* ce_thresh */
405 cxl_p1_write(adapter, CXL_PSL_FIR_CNTL, psl_fircntl);
406 /* for debugging with trace arrays */
407 cxl_p1_write(adapter, CXL_PSL_TRACE, 0x0000FF7C00000000ULL);
408
409 return 0;
410 }
411
init_implementation_adapter_xsl_regs(struct cxl * adapter,struct pci_dev * dev)412 static int init_implementation_adapter_xsl_regs(struct cxl *adapter, struct pci_dev *dev)
413 {
414 u64 xsl_dsnctl;
415 u64 chipid;
416 u64 capp_unit_id;
417 int rc;
418
419 rc = calc_capp_routing(dev, &chipid, &capp_unit_id);
420 if (rc)
421 return rc;
422
423 /* Tell XSL where to route data to */
424 xsl_dsnctl = 0x0000600000000000ULL | (chipid << (63-5));
425 xsl_dsnctl |= (capp_unit_id << (63-13));
426 cxl_p1_write(adapter, CXL_XSL_DSNCTL, xsl_dsnctl);
427
428 return 0;
429 }
430
431 /* PSL & XSL */
432 #define TBSYNC_CAL(n) (((u64)n & 0x7) << (63-3))
433 #define TBSYNC_CNT(n) (((u64)n & 0x7) << (63-6))
434 /* For the PSL this is a multiple for 0 < n <= 7: */
435 #define PSL_2048_250MHZ_CYCLES 1
436
write_timebase_ctrl_psl(struct cxl * adapter)437 static void write_timebase_ctrl_psl(struct cxl *adapter)
438 {
439 cxl_p1_write(adapter, CXL_PSL_TB_CTLSTAT,
440 TBSYNC_CNT(2 * PSL_2048_250MHZ_CYCLES));
441 }
442
443 /* XSL */
444 #define TBSYNC_ENA (1ULL << 63)
445 /* For the XSL this is 2**n * 2000 clocks for 0 < n <= 6: */
446 #define XSL_2000_CLOCKS 1
447 #define XSL_4000_CLOCKS 2
448 #define XSL_8000_CLOCKS 3
449
write_timebase_ctrl_xsl(struct cxl * adapter)450 static void write_timebase_ctrl_xsl(struct cxl *adapter)
451 {
452 cxl_p1_write(adapter, CXL_XSL_TB_CTLSTAT,
453 TBSYNC_ENA |
454 TBSYNC_CAL(3) |
455 TBSYNC_CNT(XSL_4000_CLOCKS));
456 }
457
timebase_read_psl(struct cxl * adapter)458 static u64 timebase_read_psl(struct cxl *adapter)
459 {
460 return cxl_p1_read(adapter, CXL_PSL_Timebase);
461 }
462
timebase_read_xsl(struct cxl * adapter)463 static u64 timebase_read_xsl(struct cxl *adapter)
464 {
465 return cxl_p1_read(adapter, CXL_XSL_Timebase);
466 }
467
cxl_setup_psl_timebase(struct cxl * adapter,struct pci_dev * dev)468 static void cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev)
469 {
470 u64 psl_tb;
471 int delta;
472 unsigned int retry = 0;
473 struct device_node *np;
474
475 adapter->psl_timebase_synced = false;
476
477 if (!(np = pnv_pci_get_phb_node(dev)))
478 return;
479
480 /* Do not fail when CAPP timebase sync is not supported by OPAL */
481 of_node_get(np);
482 if (! of_get_property(np, "ibm,capp-timebase-sync", NULL)) {
483 of_node_put(np);
484 dev_info(&dev->dev, "PSL timebase inactive: OPAL support missing\n");
485 return;
486 }
487 of_node_put(np);
488
489 /*
490 * Setup PSL Timebase Control and Status register
491 * with the recommended Timebase Sync Count value
492 */
493 adapter->native->sl_ops->write_timebase_ctrl(adapter);
494
495 /* Enable PSL Timebase */
496 cxl_p1_write(adapter, CXL_PSL_Control, 0x0000000000000000);
497 cxl_p1_write(adapter, CXL_PSL_Control, CXL_PSL_Control_tb);
498
499 /* Wait until CORE TB and PSL TB difference <= 16usecs */
500 do {
501 msleep(1);
502 if (retry++ > 5) {
503 dev_info(&dev->dev, "PSL timebase can't synchronize\n");
504 return;
505 }
506 psl_tb = adapter->native->sl_ops->timebase_read(adapter);
507 delta = mftb() - psl_tb;
508 if (delta < 0)
509 delta = -delta;
510 } while (tb_to_ns(delta) > 16000);
511
512 adapter->psl_timebase_synced = true;
513 return;
514 }
515
init_implementation_afu_psl_regs(struct cxl_afu * afu)516 static int init_implementation_afu_psl_regs(struct cxl_afu *afu)
517 {
518 /* read/write masks for this slice */
519 cxl_p1n_write(afu, CXL_PSL_APCALLOC_A, 0xFFFFFFFEFEFEFEFEULL);
520 /* APC read/write masks for this slice */
521 cxl_p1n_write(afu, CXL_PSL_COALLOC_A, 0xFF000000FEFEFEFEULL);
522 /* for debugging with trace arrays */
523 cxl_p1n_write(afu, CXL_PSL_SLICE_TRACE, 0x0000FFFF00000000ULL);
524 cxl_p1n_write(afu, CXL_PSL_RXCTL_A, CXL_PSL_RXCTL_AFUHP_4S);
525
526 return 0;
527 }
528
cxl_pci_setup_irq(struct cxl * adapter,unsigned int hwirq,unsigned int virq)529 int cxl_pci_setup_irq(struct cxl *adapter, unsigned int hwirq,
530 unsigned int virq)
531 {
532 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
533
534 return pnv_cxl_ioda_msi_setup(dev, hwirq, virq);
535 }
536
cxl_update_image_control(struct cxl * adapter)537 int cxl_update_image_control(struct cxl *adapter)
538 {
539 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
540 int rc;
541 int vsec;
542 u8 image_state;
543
544 if (!(vsec = find_cxl_vsec(dev))) {
545 dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
546 return -ENODEV;
547 }
548
549 if ((rc = CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state))) {
550 dev_err(&dev->dev, "failed to read image state: %i\n", rc);
551 return rc;
552 }
553
554 if (adapter->perst_loads_image)
555 image_state |= CXL_VSEC_PERST_LOADS_IMAGE;
556 else
557 image_state &= ~CXL_VSEC_PERST_LOADS_IMAGE;
558
559 if (adapter->perst_select_user)
560 image_state |= CXL_VSEC_PERST_SELECT_USER;
561 else
562 image_state &= ~CXL_VSEC_PERST_SELECT_USER;
563
564 if ((rc = CXL_WRITE_VSEC_IMAGE_STATE(dev, vsec, image_state))) {
565 dev_err(&dev->dev, "failed to update image control: %i\n", rc);
566 return rc;
567 }
568
569 return 0;
570 }
571
cxl_pci_alloc_one_irq(struct cxl * adapter)572 int cxl_pci_alloc_one_irq(struct cxl *adapter)
573 {
574 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
575
576 return pnv_cxl_alloc_hwirqs(dev, 1);
577 }
578
cxl_pci_release_one_irq(struct cxl * adapter,int hwirq)579 void cxl_pci_release_one_irq(struct cxl *adapter, int hwirq)
580 {
581 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
582
583 return pnv_cxl_release_hwirqs(dev, hwirq, 1);
584 }
585
cxl_pci_alloc_irq_ranges(struct cxl_irq_ranges * irqs,struct cxl * adapter,unsigned int num)586 int cxl_pci_alloc_irq_ranges(struct cxl_irq_ranges *irqs,
587 struct cxl *adapter, unsigned int num)
588 {
589 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
590
591 return pnv_cxl_alloc_hwirq_ranges(irqs, dev, num);
592 }
593
cxl_pci_release_irq_ranges(struct cxl_irq_ranges * irqs,struct cxl * adapter)594 void cxl_pci_release_irq_ranges(struct cxl_irq_ranges *irqs,
595 struct cxl *adapter)
596 {
597 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
598
599 pnv_cxl_release_hwirq_ranges(irqs, dev);
600 }
601
setup_cxl_bars(struct pci_dev * dev)602 static int setup_cxl_bars(struct pci_dev *dev)
603 {
604 /* Safety check in case we get backported to < 3.17 without M64 */
605 if ((p1_base(dev) < 0x100000000ULL) ||
606 (p2_base(dev) < 0x100000000ULL)) {
607 dev_err(&dev->dev, "ABORTING: M32 BAR assignment incompatible with CXL\n");
608 return -ENODEV;
609 }
610
611 /*
612 * BAR 4/5 has a special meaning for CXL and must be programmed with a
613 * special value corresponding to the CXL protocol address range.
614 * For POWER 8 that means bits 48:49 must be set to 10
615 */
616 pci_write_config_dword(dev, PCI_BASE_ADDRESS_4, 0x00000000);
617 pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, 0x00020000);
618
619 return 0;
620 }
621
622 #ifdef CONFIG_CXL_BIMODAL
623
624 struct cxl_switch_work {
625 struct pci_dev *dev;
626 struct work_struct work;
627 int vsec;
628 int mode;
629 };
630
switch_card_to_cxl(struct work_struct * work)631 static void switch_card_to_cxl(struct work_struct *work)
632 {
633 struct cxl_switch_work *switch_work =
634 container_of(work, struct cxl_switch_work, work);
635 struct pci_dev *dev = switch_work->dev;
636 struct pci_bus *bus = dev->bus;
637 struct pci_controller *hose = pci_bus_to_host(bus);
638 struct pci_dev *bridge;
639 struct pnv_php_slot *php_slot;
640 unsigned int devfn;
641 u8 val;
642 int rc;
643
644 dev_info(&bus->dev, "cxl: Preparing for mode switch...\n");
645 bridge = list_first_entry_or_null(&hose->bus->devices, struct pci_dev,
646 bus_list);
647 if (!bridge) {
648 dev_WARN(&bus->dev, "cxl: Couldn't find root port!\n");
649 goto err_dev_put;
650 }
651
652 php_slot = pnv_php_find_slot(pci_device_to_OF_node(bridge));
653 if (!php_slot) {
654 dev_err(&bus->dev, "cxl: Failed to find slot hotplug "
655 "information. You may need to upgrade "
656 "skiboot. Aborting.\n");
657 goto err_dev_put;
658 }
659
660 rc = CXL_READ_VSEC_MODE_CONTROL(dev, switch_work->vsec, &val);
661 if (rc) {
662 dev_err(&bus->dev, "cxl: Failed to read CAPI mode control: %i\n", rc);
663 goto err_dev_put;
664 }
665 devfn = dev->devfn;
666
667 /* Release the reference obtained in cxl_check_and_switch_mode() */
668 pci_dev_put(dev);
669
670 dev_dbg(&bus->dev, "cxl: Removing PCI devices from kernel\n");
671 pci_lock_rescan_remove();
672 pci_hp_remove_devices(bridge->subordinate);
673 pci_unlock_rescan_remove();
674
675 /* Switch the CXL protocol on the card */
676 if (switch_work->mode == CXL_BIMODE_CXL) {
677 dev_info(&bus->dev, "cxl: Switching card to CXL mode\n");
678 val &= ~CXL_VSEC_PROTOCOL_MASK;
679 val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
680 rc = pnv_cxl_enable_phb_kernel_api(hose, true);
681 if (rc) {
682 dev_err(&bus->dev, "cxl: Failed to enable kernel API"
683 " on real PHB, aborting\n");
684 goto err_free_work;
685 }
686 } else {
687 dev_WARN(&bus->dev, "cxl: Switching card to PCI mode not supported!\n");
688 goto err_free_work;
689 }
690
691 rc = CXL_WRITE_VSEC_MODE_CONTROL_BUS(bus, devfn, switch_work->vsec, val);
692 if (rc) {
693 dev_err(&bus->dev, "cxl: Failed to configure CXL protocol: %i\n", rc);
694 goto err_free_work;
695 }
696
697 /*
698 * The CAIA spec (v1.1, Section 10.6 Bi-modal Device Support) states
699 * we must wait 100ms after this mode switch before touching PCIe config
700 * space.
701 */
702 msleep(100);
703
704 /*
705 * Hot reset to cause the card to come back in cxl mode. A
706 * OPAL_RESET_PCI_LINK would be sufficient, but currently lacks support
707 * in skiboot, so we use a hot reset instead.
708 *
709 * We call pci_set_pcie_reset_state() on the bridge, as a CAPI card is
710 * guaranteed to sit directly under the root port, and setting the reset
711 * state on a device directly under the root port is equivalent to doing
712 * it on the root port iself.
713 */
714 dev_info(&bus->dev, "cxl: Configuration write complete, resetting card\n");
715 pci_set_pcie_reset_state(bridge, pcie_hot_reset);
716 pci_set_pcie_reset_state(bridge, pcie_deassert_reset);
717
718 dev_dbg(&bus->dev, "cxl: Offlining slot\n");
719 rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_OFFLINE);
720 if (rc) {
721 dev_err(&bus->dev, "cxl: OPAL offlining call failed: %i\n", rc);
722 goto err_free_work;
723 }
724
725 dev_dbg(&bus->dev, "cxl: Onlining and probing slot\n");
726 rc = pnv_php_set_slot_power_state(&php_slot->slot, OPAL_PCI_SLOT_ONLINE);
727 if (rc) {
728 dev_err(&bus->dev, "cxl: OPAL onlining call failed: %i\n", rc);
729 goto err_free_work;
730 }
731
732 pci_lock_rescan_remove();
733 pci_hp_add_devices(bridge->subordinate);
734 pci_unlock_rescan_remove();
735
736 dev_info(&bus->dev, "cxl: CAPI mode switch completed\n");
737 kfree(switch_work);
738 return;
739
740 err_dev_put:
741 /* Release the reference obtained in cxl_check_and_switch_mode() */
742 pci_dev_put(dev);
743 err_free_work:
744 kfree(switch_work);
745 }
746
cxl_check_and_switch_mode(struct pci_dev * dev,int mode,int vsec)747 int cxl_check_and_switch_mode(struct pci_dev *dev, int mode, int vsec)
748 {
749 struct cxl_switch_work *work;
750 u8 val;
751 int rc;
752
753 if (!cpu_has_feature(CPU_FTR_HVMODE))
754 return -ENODEV;
755
756 if (!vsec) {
757 vsec = find_cxl_vsec(dev);
758 if (!vsec) {
759 dev_info(&dev->dev, "CXL VSEC not found\n");
760 return -ENODEV;
761 }
762 }
763
764 rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
765 if (rc) {
766 dev_err(&dev->dev, "Failed to read current mode control: %i", rc);
767 return rc;
768 }
769
770 if (mode == CXL_BIMODE_PCI) {
771 if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
772 dev_info(&dev->dev, "Card is already in PCI mode\n");
773 return 0;
774 }
775 /*
776 * TODO: Before it's safe to switch the card back to PCI mode
777 * we need to disable the CAPP and make sure any cachelines the
778 * card holds have been flushed out. Needs skiboot support.
779 */
780 dev_WARN(&dev->dev, "CXL mode switch to PCI unsupported!\n");
781 return -EIO;
782 }
783
784 if (val & CXL_VSEC_PROTOCOL_ENABLE) {
785 dev_info(&dev->dev, "Card is already in CXL mode\n");
786 return 0;
787 }
788
789 dev_info(&dev->dev, "Card is in PCI mode, scheduling kernel thread "
790 "to switch to CXL mode\n");
791
792 work = kmalloc(sizeof(struct cxl_switch_work), GFP_KERNEL);
793 if (!work)
794 return -ENOMEM;
795
796 pci_dev_get(dev);
797 work->dev = dev;
798 work->vsec = vsec;
799 work->mode = mode;
800 INIT_WORK(&work->work, switch_card_to_cxl);
801
802 schedule_work(&work->work);
803
804 /*
805 * We return a failure now to abort the driver init. Once the
806 * link has been cycled and the card is in cxl mode we will
807 * come back (possibly using the generic cxl driver), but
808 * return success as the card should then be in cxl mode.
809 *
810 * TODO: What if the card comes back in PCI mode even after
811 * the switch? Don't want to spin endlessly.
812 */
813 return -EBUSY;
814 }
815 EXPORT_SYMBOL_GPL(cxl_check_and_switch_mode);
816
817 #endif /* CONFIG_CXL_BIMODAL */
818
setup_cxl_protocol_area(struct pci_dev * dev)819 static int setup_cxl_protocol_area(struct pci_dev *dev)
820 {
821 u8 val;
822 int rc;
823 int vsec = find_cxl_vsec(dev);
824
825 if (!vsec) {
826 dev_info(&dev->dev, "CXL VSEC not found\n");
827 return -ENODEV;
828 }
829
830 rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val);
831 if (rc) {
832 dev_err(&dev->dev, "Failed to read current mode control: %i\n", rc);
833 return rc;
834 }
835
836 if (!(val & CXL_VSEC_PROTOCOL_ENABLE)) {
837 dev_err(&dev->dev, "Card not in CAPI mode!\n");
838 return -EIO;
839 }
840
841 if ((val & CXL_VSEC_PROTOCOL_MASK) != CXL_VSEC_PROTOCOL_256TB) {
842 val &= ~CXL_VSEC_PROTOCOL_MASK;
843 val |= CXL_VSEC_PROTOCOL_256TB;
844 rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val);
845 if (rc) {
846 dev_err(&dev->dev, "Failed to set CXL protocol area: %i\n", rc);
847 return rc;
848 }
849 }
850
851 return 0;
852 }
853
pci_map_slice_regs(struct cxl_afu * afu,struct cxl * adapter,struct pci_dev * dev)854 static int pci_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev)
855 {
856 u64 p1n_base, p2n_base, afu_desc;
857 const u64 p1n_size = 0x100;
858 const u64 p2n_size = 0x1000;
859
860 p1n_base = p1_base(dev) + 0x10000 + (afu->slice * p1n_size);
861 p2n_base = p2_base(dev) + (afu->slice * p2n_size);
862 afu->psn_phys = p2_base(dev) + (adapter->native->ps_off + (afu->slice * adapter->ps_size));
863 afu_desc = p2_base(dev) + adapter->native->afu_desc_off + (afu->slice * adapter->native->afu_desc_size);
864
865 if (!(afu->native->p1n_mmio = ioremap(p1n_base, p1n_size)))
866 goto err;
867 if (!(afu->p2n_mmio = ioremap(p2n_base, p2n_size)))
868 goto err1;
869 if (afu_desc) {
870 if (!(afu->native->afu_desc_mmio = ioremap(afu_desc, adapter->native->afu_desc_size)))
871 goto err2;
872 }
873
874 return 0;
875 err2:
876 iounmap(afu->p2n_mmio);
877 err1:
878 iounmap(afu->native->p1n_mmio);
879 err:
880 dev_err(&afu->dev, "Error mapping AFU MMIO regions\n");
881 return -ENOMEM;
882 }
883
pci_unmap_slice_regs(struct cxl_afu * afu)884 static void pci_unmap_slice_regs(struct cxl_afu *afu)
885 {
886 if (afu->p2n_mmio) {
887 iounmap(afu->p2n_mmio);
888 afu->p2n_mmio = NULL;
889 }
890 if (afu->native->p1n_mmio) {
891 iounmap(afu->native->p1n_mmio);
892 afu->native->p1n_mmio = NULL;
893 }
894 if (afu->native->afu_desc_mmio) {
895 iounmap(afu->native->afu_desc_mmio);
896 afu->native->afu_desc_mmio = NULL;
897 }
898 }
899
cxl_pci_release_afu(struct device * dev)900 void cxl_pci_release_afu(struct device *dev)
901 {
902 struct cxl_afu *afu = to_cxl_afu(dev);
903
904 pr_devel("%s\n", __func__);
905
906 idr_destroy(&afu->contexts_idr);
907 cxl_release_spa(afu);
908
909 kfree(afu->native);
910 kfree(afu);
911 }
912
913 /* Expects AFU struct to have recently been zeroed out */
cxl_read_afu_descriptor(struct cxl_afu * afu)914 static int cxl_read_afu_descriptor(struct cxl_afu *afu)
915 {
916 u64 val;
917
918 val = AFUD_READ_INFO(afu);
919 afu->pp_irqs = AFUD_NUM_INTS_PER_PROC(val);
920 afu->max_procs_virtualised = AFUD_NUM_PROCS(val);
921 afu->crs_num = AFUD_NUM_CRS(val);
922
923 if (AFUD_AFU_DIRECTED(val))
924 afu->modes_supported |= CXL_MODE_DIRECTED;
925 if (AFUD_DEDICATED_PROCESS(val))
926 afu->modes_supported |= CXL_MODE_DEDICATED;
927 if (AFUD_TIME_SLICED(val))
928 afu->modes_supported |= CXL_MODE_TIME_SLICED;
929
930 val = AFUD_READ_PPPSA(afu);
931 afu->pp_size = AFUD_PPPSA_LEN(val) * 4096;
932 afu->psa = AFUD_PPPSA_PSA(val);
933 if ((afu->pp_psa = AFUD_PPPSA_PP(val)))
934 afu->native->pp_offset = AFUD_READ_PPPSA_OFF(afu);
935
936 val = AFUD_READ_CR(afu);
937 afu->crs_len = AFUD_CR_LEN(val) * 256;
938 afu->crs_offset = AFUD_READ_CR_OFF(afu);
939
940
941 /* eb_len is in multiple of 4K */
942 afu->eb_len = AFUD_EB_LEN(AFUD_READ_EB(afu)) * 4096;
943 afu->eb_offset = AFUD_READ_EB_OFF(afu);
944
945 /* eb_off is 4K aligned so lower 12 bits are always zero */
946 if (EXTRACT_PPC_BITS(afu->eb_offset, 0, 11) != 0) {
947 dev_warn(&afu->dev,
948 "Invalid AFU error buffer offset %Lx\n",
949 afu->eb_offset);
950 dev_info(&afu->dev,
951 "Ignoring AFU error buffer in the descriptor\n");
952 /* indicate that no afu buffer exists */
953 afu->eb_len = 0;
954 }
955
956 return 0;
957 }
958
cxl_afu_descriptor_looks_ok(struct cxl_afu * afu)959 static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu)
960 {
961 int i, rc;
962 u32 val;
963
964 if (afu->psa && afu->adapter->ps_size <
965 (afu->native->pp_offset + afu->pp_size*afu->max_procs_virtualised)) {
966 dev_err(&afu->dev, "per-process PSA can't fit inside the PSA!\n");
967 return -ENODEV;
968 }
969
970 if (afu->pp_psa && (afu->pp_size < PAGE_SIZE))
971 dev_warn(&afu->dev, "AFU uses < PAGE_SIZE per-process PSA!");
972
973 for (i = 0; i < afu->crs_num; i++) {
974 rc = cxl_ops->afu_cr_read32(afu, i, 0, &val);
975 if (rc || val == 0) {
976 dev_err(&afu->dev, "ABORTING: AFU configuration record %i is invalid\n", i);
977 return -EINVAL;
978 }
979 }
980
981 if ((afu->modes_supported & ~CXL_MODE_DEDICATED) && afu->max_procs_virtualised == 0) {
982 /*
983 * We could also check this for the dedicated process model
984 * since the architecture indicates it should be set to 1, but
985 * in that case we ignore the value and I'd rather not risk
986 * breaking any existing dedicated process AFUs that left it as
987 * 0 (not that I'm aware of any). It is clearly an error for an
988 * AFU directed AFU to set this to 0, and would have previously
989 * triggered a bug resulting in the maximum not being enforced
990 * at all since idr_alloc treats 0 as no maximum.
991 */
992 dev_err(&afu->dev, "AFU does not support any processes\n");
993 return -EINVAL;
994 }
995
996 return 0;
997 }
998
sanitise_afu_regs(struct cxl_afu * afu)999 static int sanitise_afu_regs(struct cxl_afu *afu)
1000 {
1001 u64 reg;
1002
1003 /*
1004 * Clear out any regs that contain either an IVTE or address or may be
1005 * waiting on an acknowledgement to try to be a bit safer as we bring
1006 * it online
1007 */
1008 reg = cxl_p2n_read(afu, CXL_AFU_Cntl_An);
1009 if ((reg & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) {
1010 dev_warn(&afu->dev, "WARNING: AFU was not disabled: %#016llx\n", reg);
1011 if (cxl_ops->afu_reset(afu))
1012 return -EIO;
1013 if (cxl_afu_disable(afu))
1014 return -EIO;
1015 if (cxl_psl_purge(afu))
1016 return -EIO;
1017 }
1018 cxl_p1n_write(afu, CXL_PSL_SPAP_An, 0x0000000000000000);
1019 cxl_p1n_write(afu, CXL_PSL_IVTE_Limit_An, 0x0000000000000000);
1020 cxl_p1n_write(afu, CXL_PSL_IVTE_Offset_An, 0x0000000000000000);
1021 cxl_p1n_write(afu, CXL_PSL_AMBAR_An, 0x0000000000000000);
1022 cxl_p1n_write(afu, CXL_PSL_SPOffset_An, 0x0000000000000000);
1023 cxl_p1n_write(afu, CXL_HAURP_An, 0x0000000000000000);
1024 cxl_p2n_write(afu, CXL_CSRP_An, 0x0000000000000000);
1025 cxl_p2n_write(afu, CXL_AURP1_An, 0x0000000000000000);
1026 cxl_p2n_write(afu, CXL_AURP0_An, 0x0000000000000000);
1027 cxl_p2n_write(afu, CXL_SSTP1_An, 0x0000000000000000);
1028 cxl_p2n_write(afu, CXL_SSTP0_An, 0x0000000000000000);
1029 reg = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
1030 if (reg) {
1031 dev_warn(&afu->dev, "AFU had pending DSISR: %#016llx\n", reg);
1032 if (reg & CXL_PSL_DSISR_TRANS)
1033 cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE);
1034 else
1035 cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A);
1036 }
1037 if (afu->adapter->native->sl_ops->register_serr_irq) {
1038 reg = cxl_p1n_read(afu, CXL_PSL_SERR_An);
1039 if (reg) {
1040 if (reg & ~0xffff)
1041 dev_warn(&afu->dev, "AFU had pending SERR: %#016llx\n", reg);
1042 cxl_p1n_write(afu, CXL_PSL_SERR_An, reg & ~0xffff);
1043 }
1044 }
1045 reg = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
1046 if (reg) {
1047 dev_warn(&afu->dev, "AFU had pending error status: %#016llx\n", reg);
1048 cxl_p2n_write(afu, CXL_PSL_ErrStat_An, reg);
1049 }
1050
1051 return 0;
1052 }
1053
1054 #define ERR_BUFF_MAX_COPY_SIZE PAGE_SIZE
1055 /*
1056 * afu_eb_read:
1057 * Called from sysfs and reads the afu error info buffer. The h/w only supports
1058 * 4/8 bytes aligned access. So in case the requested offset/count arent 8 byte
1059 * aligned the function uses a bounce buffer which can be max PAGE_SIZE.
1060 */
cxl_pci_afu_read_err_buffer(struct cxl_afu * afu,char * buf,loff_t off,size_t count)1061 ssize_t cxl_pci_afu_read_err_buffer(struct cxl_afu *afu, char *buf,
1062 loff_t off, size_t count)
1063 {
1064 loff_t aligned_start, aligned_end;
1065 size_t aligned_length;
1066 void *tbuf;
1067 const void __iomem *ebuf = afu->native->afu_desc_mmio + afu->eb_offset;
1068
1069 if (count == 0 || off < 0 || (size_t)off >= afu->eb_len)
1070 return 0;
1071
1072 /* calculate aligned read window */
1073 count = min((size_t)(afu->eb_len - off), count);
1074 aligned_start = round_down(off, 8);
1075 aligned_end = round_up(off + count, 8);
1076 aligned_length = aligned_end - aligned_start;
1077
1078 /* max we can copy in one read is PAGE_SIZE */
1079 if (aligned_length > ERR_BUFF_MAX_COPY_SIZE) {
1080 aligned_length = ERR_BUFF_MAX_COPY_SIZE;
1081 count = ERR_BUFF_MAX_COPY_SIZE - (off & 0x7);
1082 }
1083
1084 /* use bounce buffer for copy */
1085 tbuf = (void *)__get_free_page(GFP_TEMPORARY);
1086 if (!tbuf)
1087 return -ENOMEM;
1088
1089 /* perform aligned read from the mmio region */
1090 memcpy_fromio(tbuf, ebuf + aligned_start, aligned_length);
1091 memcpy(buf, tbuf + (off & 0x7), count);
1092
1093 free_page((unsigned long)tbuf);
1094
1095 return count;
1096 }
1097
pci_configure_afu(struct cxl_afu * afu,struct cxl * adapter,struct pci_dev * dev)1098 static int pci_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev)
1099 {
1100 int rc;
1101
1102 if ((rc = pci_map_slice_regs(afu, adapter, dev)))
1103 return rc;
1104
1105 if ((rc = sanitise_afu_regs(afu)))
1106 goto err1;
1107
1108 /* We need to reset the AFU before we can read the AFU descriptor */
1109 if ((rc = cxl_ops->afu_reset(afu)))
1110 goto err1;
1111
1112 if (cxl_verbose)
1113 dump_afu_descriptor(afu);
1114
1115 if ((rc = cxl_read_afu_descriptor(afu)))
1116 goto err1;
1117
1118 if ((rc = cxl_afu_descriptor_looks_ok(afu)))
1119 goto err1;
1120
1121 if (adapter->native->sl_ops->afu_regs_init)
1122 if ((rc = adapter->native->sl_ops->afu_regs_init(afu)))
1123 goto err1;
1124
1125 if (adapter->native->sl_ops->register_serr_irq)
1126 if ((rc = adapter->native->sl_ops->register_serr_irq(afu)))
1127 goto err1;
1128
1129 if ((rc = cxl_native_register_psl_irq(afu)))
1130 goto err2;
1131
1132 atomic_set(&afu->configured_state, 0);
1133 return 0;
1134
1135 err2:
1136 if (adapter->native->sl_ops->release_serr_irq)
1137 adapter->native->sl_ops->release_serr_irq(afu);
1138 err1:
1139 pci_unmap_slice_regs(afu);
1140 return rc;
1141 }
1142
pci_deconfigure_afu(struct cxl_afu * afu)1143 static void pci_deconfigure_afu(struct cxl_afu *afu)
1144 {
1145 /*
1146 * It's okay to deconfigure when AFU is already locked, otherwise wait
1147 * until there are no readers
1148 */
1149 if (atomic_read(&afu->configured_state) != -1) {
1150 while (atomic_cmpxchg(&afu->configured_state, 0, -1) != -1)
1151 schedule();
1152 }
1153 cxl_native_release_psl_irq(afu);
1154 if (afu->adapter->native->sl_ops->release_serr_irq)
1155 afu->adapter->native->sl_ops->release_serr_irq(afu);
1156 pci_unmap_slice_regs(afu);
1157 }
1158
pci_init_afu(struct cxl * adapter,int slice,struct pci_dev * dev)1159 static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
1160 {
1161 struct cxl_afu *afu;
1162 int rc = -ENOMEM;
1163
1164 afu = cxl_alloc_afu(adapter, slice);
1165 if (!afu)
1166 return -ENOMEM;
1167
1168 afu->native = kzalloc(sizeof(struct cxl_afu_native), GFP_KERNEL);
1169 if (!afu->native)
1170 goto err_free_afu;
1171
1172 mutex_init(&afu->native->spa_mutex);
1173
1174 rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice);
1175 if (rc)
1176 goto err_free_native;
1177
1178 rc = pci_configure_afu(afu, adapter, dev);
1179 if (rc)
1180 goto err_free_native;
1181
1182 /* Don't care if this fails */
1183 cxl_debugfs_afu_add(afu);
1184
1185 /*
1186 * After we call this function we must not free the afu directly, even
1187 * if it returns an error!
1188 */
1189 if ((rc = cxl_register_afu(afu)))
1190 goto err_put1;
1191
1192 if ((rc = cxl_sysfs_afu_add(afu)))
1193 goto err_put1;
1194
1195 adapter->afu[afu->slice] = afu;
1196
1197 if ((rc = cxl_pci_vphb_add(afu)))
1198 dev_info(&afu->dev, "Can't register vPHB\n");
1199
1200 return 0;
1201
1202 err_put1:
1203 pci_deconfigure_afu(afu);
1204 cxl_debugfs_afu_remove(afu);
1205 device_unregister(&afu->dev);
1206 return rc;
1207
1208 err_free_native:
1209 kfree(afu->native);
1210 err_free_afu:
1211 kfree(afu);
1212 return rc;
1213
1214 }
1215
cxl_pci_remove_afu(struct cxl_afu * afu)1216 static void cxl_pci_remove_afu(struct cxl_afu *afu)
1217 {
1218 pr_devel("%s\n", __func__);
1219
1220 if (!afu)
1221 return;
1222
1223 cxl_pci_vphb_remove(afu);
1224 cxl_sysfs_afu_remove(afu);
1225 cxl_debugfs_afu_remove(afu);
1226
1227 spin_lock(&afu->adapter->afu_list_lock);
1228 afu->adapter->afu[afu->slice] = NULL;
1229 spin_unlock(&afu->adapter->afu_list_lock);
1230
1231 cxl_context_detach_all(afu);
1232 cxl_ops->afu_deactivate_mode(afu, afu->current_mode);
1233
1234 pci_deconfigure_afu(afu);
1235 device_unregister(&afu->dev);
1236 }
1237
cxl_pci_reset(struct cxl * adapter)1238 int cxl_pci_reset(struct cxl *adapter)
1239 {
1240 struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
1241 int rc;
1242
1243 if (adapter->perst_same_image) {
1244 dev_warn(&dev->dev,
1245 "cxl: refusing to reset/reflash when perst_reloads_same_image is set.\n");
1246 return -EINVAL;
1247 }
1248
1249 dev_info(&dev->dev, "CXL reset\n");
1250
1251 /* the adapter is about to be reset, so ignore errors */
1252 cxl_data_cache_flush(adapter);
1253
1254 /* pcie_warm_reset requests a fundamental pci reset which includes a
1255 * PERST assert/deassert. PERST triggers a loading of the image
1256 * if "user" or "factory" is selected in sysfs */
1257 if ((rc = pci_set_pcie_reset_state(dev, pcie_warm_reset))) {
1258 dev_err(&dev->dev, "cxl: pcie_warm_reset failed\n");
1259 return rc;
1260 }
1261
1262 return rc;
1263 }
1264
cxl_map_adapter_regs(struct cxl * adapter,struct pci_dev * dev)1265 static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
1266 {
1267 if (pci_request_region(dev, 2, "priv 2 regs"))
1268 goto err1;
1269 if (pci_request_region(dev, 0, "priv 1 regs"))
1270 goto err2;
1271
1272 pr_devel("cxl_map_adapter_regs: p1: %#016llx %#llx, p2: %#016llx %#llx",
1273 p1_base(dev), p1_size(dev), p2_base(dev), p2_size(dev));
1274
1275 if (!(adapter->native->p1_mmio = ioremap(p1_base(dev), p1_size(dev))))
1276 goto err3;
1277
1278 if (!(adapter->native->p2_mmio = ioremap(p2_base(dev), p2_size(dev))))
1279 goto err4;
1280
1281 return 0;
1282
1283 err4:
1284 iounmap(adapter->native->p1_mmio);
1285 adapter->native->p1_mmio = NULL;
1286 err3:
1287 pci_release_region(dev, 0);
1288 err2:
1289 pci_release_region(dev, 2);
1290 err1:
1291 return -ENOMEM;
1292 }
1293
cxl_unmap_adapter_regs(struct cxl * adapter)1294 static void cxl_unmap_adapter_regs(struct cxl *adapter)
1295 {
1296 if (adapter->native->p1_mmio) {
1297 iounmap(adapter->native->p1_mmio);
1298 adapter->native->p1_mmio = NULL;
1299 pci_release_region(to_pci_dev(adapter->dev.parent), 2);
1300 }
1301 if (adapter->native->p2_mmio) {
1302 iounmap(adapter->native->p2_mmio);
1303 adapter->native->p2_mmio = NULL;
1304 pci_release_region(to_pci_dev(adapter->dev.parent), 0);
1305 }
1306 }
1307
cxl_read_vsec(struct cxl * adapter,struct pci_dev * dev)1308 static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
1309 {
1310 int vsec;
1311 u32 afu_desc_off, afu_desc_size;
1312 u32 ps_off, ps_size;
1313 u16 vseclen;
1314 u8 image_state;
1315
1316 if (!(vsec = find_cxl_vsec(dev))) {
1317 dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
1318 return -ENODEV;
1319 }
1320
1321 CXL_READ_VSEC_LENGTH(dev, vsec, &vseclen);
1322 if (vseclen < CXL_VSEC_MIN_SIZE) {
1323 dev_err(&dev->dev, "ABORTING: CXL VSEC too short\n");
1324 return -EINVAL;
1325 }
1326
1327 CXL_READ_VSEC_STATUS(dev, vsec, &adapter->vsec_status);
1328 CXL_READ_VSEC_PSL_REVISION(dev, vsec, &adapter->psl_rev);
1329 CXL_READ_VSEC_CAIA_MAJOR(dev, vsec, &adapter->caia_major);
1330 CXL_READ_VSEC_CAIA_MINOR(dev, vsec, &adapter->caia_minor);
1331 CXL_READ_VSEC_BASE_IMAGE(dev, vsec, &adapter->base_image);
1332 CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state);
1333 adapter->user_image_loaded = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
1334 adapter->perst_select_user = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
1335
1336 CXL_READ_VSEC_NAFUS(dev, vsec, &adapter->slices);
1337 CXL_READ_VSEC_AFU_DESC_OFF(dev, vsec, &afu_desc_off);
1338 CXL_READ_VSEC_AFU_DESC_SIZE(dev, vsec, &afu_desc_size);
1339 CXL_READ_VSEC_PS_OFF(dev, vsec, &ps_off);
1340 CXL_READ_VSEC_PS_SIZE(dev, vsec, &ps_size);
1341
1342 /* Convert everything to bytes, because there is NO WAY I'd look at the
1343 * code a month later and forget what units these are in ;-) */
1344 adapter->native->ps_off = ps_off * 64 * 1024;
1345 adapter->ps_size = ps_size * 64 * 1024;
1346 adapter->native->afu_desc_off = afu_desc_off * 64 * 1024;
1347 adapter->native->afu_desc_size = afu_desc_size * 64 * 1024;
1348
1349 /* Total IRQs - 1 PSL ERROR - #AFU*(1 slice error + 1 DSI) */
1350 adapter->user_irqs = pnv_cxl_get_irq_count(dev) - 1 - 2*adapter->slices;
1351
1352 return 0;
1353 }
1354
1355 /*
1356 * Workaround a PCIe Host Bridge defect on some cards, that can cause
1357 * malformed Transaction Layer Packet (TLP) errors to be erroneously
1358 * reported. Mask this error in the Uncorrectable Error Mask Register.
1359 *
1360 * The upper nibble of the PSL revision is used to distinguish between
1361 * different cards. The affected ones have it set to 0.
1362 */
cxl_fixup_malformed_tlp(struct cxl * adapter,struct pci_dev * dev)1363 static void cxl_fixup_malformed_tlp(struct cxl *adapter, struct pci_dev *dev)
1364 {
1365 int aer;
1366 u32 data;
1367
1368 if (adapter->psl_rev & 0xf000)
1369 return;
1370 if (!(aer = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR)))
1371 return;
1372 pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, &data);
1373 if (data & PCI_ERR_UNC_MALF_TLP)
1374 if (data & PCI_ERR_UNC_INTN)
1375 return;
1376 data |= PCI_ERR_UNC_MALF_TLP;
1377 data |= PCI_ERR_UNC_INTN;
1378 pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, data);
1379 }
1380
cxl_vsec_looks_ok(struct cxl * adapter,struct pci_dev * dev)1381 static int cxl_vsec_looks_ok(struct cxl *adapter, struct pci_dev *dev)
1382 {
1383 if (adapter->vsec_status & CXL_STATUS_SECOND_PORT)
1384 return -EBUSY;
1385
1386 if (adapter->vsec_status & CXL_UNSUPPORTED_FEATURES) {
1387 dev_err(&dev->dev, "ABORTING: CXL requires unsupported features\n");
1388 return -EINVAL;
1389 }
1390
1391 if (!adapter->slices) {
1392 /* Once we support dynamic reprogramming we can use the card if
1393 * it supports loadable AFUs */
1394 dev_err(&dev->dev, "ABORTING: Device has no AFUs\n");
1395 return -EINVAL;
1396 }
1397
1398 if (!adapter->native->afu_desc_off || !adapter->native->afu_desc_size) {
1399 dev_err(&dev->dev, "ABORTING: VSEC shows no AFU descriptors\n");
1400 return -EINVAL;
1401 }
1402
1403 if (adapter->ps_size > p2_size(dev) - adapter->native->ps_off) {
1404 dev_err(&dev->dev, "ABORTING: Problem state size larger than "
1405 "available in BAR2: 0x%llx > 0x%llx\n",
1406 adapter->ps_size, p2_size(dev) - adapter->native->ps_off);
1407 return -EINVAL;
1408 }
1409
1410 return 0;
1411 }
1412
cxl_pci_read_adapter_vpd(struct cxl * adapter,void * buf,size_t len)1413 ssize_t cxl_pci_read_adapter_vpd(struct cxl *adapter, void *buf, size_t len)
1414 {
1415 return pci_read_vpd(to_pci_dev(adapter->dev.parent), 0, len, buf);
1416 }
1417
cxl_release_adapter(struct device * dev)1418 static void cxl_release_adapter(struct device *dev)
1419 {
1420 struct cxl *adapter = to_cxl_adapter(dev);
1421
1422 pr_devel("cxl_release_adapter\n");
1423
1424 cxl_remove_adapter_nr(adapter);
1425
1426 kfree(adapter->native);
1427 kfree(adapter);
1428 }
1429
1430 #define CXL_PSL_ErrIVTE_tberror (0x1ull << (63-31))
1431
sanitise_adapter_regs(struct cxl * adapter)1432 static int sanitise_adapter_regs(struct cxl *adapter)
1433 {
1434 /* Clear PSL tberror bit by writing 1 to it */
1435 cxl_p1_write(adapter, CXL_PSL_ErrIVTE, CXL_PSL_ErrIVTE_tberror);
1436 return cxl_tlb_slb_invalidate(adapter);
1437 }
1438
1439 /* This should contain *only* operations that can safely be done in
1440 * both creation and recovery.
1441 */
cxl_configure_adapter(struct cxl * adapter,struct pci_dev * dev)1442 static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev)
1443 {
1444 int rc;
1445
1446 adapter->dev.parent = &dev->dev;
1447 adapter->dev.release = cxl_release_adapter;
1448 pci_set_drvdata(dev, adapter);
1449
1450 rc = pci_enable_device(dev);
1451 if (rc) {
1452 dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
1453 return rc;
1454 }
1455
1456 if ((rc = cxl_read_vsec(adapter, dev)))
1457 return rc;
1458
1459 if ((rc = cxl_vsec_looks_ok(adapter, dev)))
1460 return rc;
1461
1462 cxl_fixup_malformed_tlp(adapter, dev);
1463
1464 if ((rc = setup_cxl_bars(dev)))
1465 return rc;
1466
1467 if ((rc = setup_cxl_protocol_area(dev)))
1468 return rc;
1469
1470 if ((rc = cxl_update_image_control(adapter)))
1471 return rc;
1472
1473 if ((rc = cxl_map_adapter_regs(adapter, dev)))
1474 return rc;
1475
1476 if ((rc = sanitise_adapter_regs(adapter)))
1477 goto err;
1478
1479 if ((rc = adapter->native->sl_ops->adapter_regs_init(adapter, dev)))
1480 goto err;
1481
1482 /* Required for devices using CAPP DMA mode, harmless for others */
1483 pci_set_master(dev);
1484
1485 if ((rc = pnv_phb_to_cxl_mode(dev, adapter->native->sl_ops->capi_mode)))
1486 goto err;
1487
1488 /* If recovery happened, the last step is to turn on snooping.
1489 * In the non-recovery case this has no effect */
1490 if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON)))
1491 goto err;
1492
1493 /* Ignore error, adapter init is not dependant on timebase sync */
1494 cxl_setup_psl_timebase(adapter, dev);
1495
1496 if ((rc = cxl_native_register_psl_err_irq(adapter)))
1497 goto err;
1498
1499 return 0;
1500
1501 err:
1502 cxl_unmap_adapter_regs(adapter);
1503 return rc;
1504
1505 }
1506
cxl_deconfigure_adapter(struct cxl * adapter)1507 static void cxl_deconfigure_adapter(struct cxl *adapter)
1508 {
1509 struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
1510
1511 cxl_native_release_psl_err_irq(adapter);
1512 cxl_unmap_adapter_regs(adapter);
1513
1514 pci_disable_device(pdev);
1515 }
1516
1517 static const struct cxl_service_layer_ops psl_ops = {
1518 .adapter_regs_init = init_implementation_adapter_psl_regs,
1519 .afu_regs_init = init_implementation_afu_psl_regs,
1520 .register_serr_irq = cxl_native_register_serr_irq,
1521 .release_serr_irq = cxl_native_release_serr_irq,
1522 .debugfs_add_adapter_sl_regs = cxl_debugfs_add_adapter_psl_regs,
1523 .debugfs_add_afu_sl_regs = cxl_debugfs_add_afu_psl_regs,
1524 .psl_irq_dump_registers = cxl_native_psl_irq_dump_regs,
1525 .err_irq_dump_registers = cxl_native_err_irq_dump_regs,
1526 .debugfs_stop_trace = cxl_stop_trace,
1527 .write_timebase_ctrl = write_timebase_ctrl_psl,
1528 .timebase_read = timebase_read_psl,
1529 .capi_mode = OPAL_PHB_CAPI_MODE_CAPI,
1530 .needs_reset_before_disable = true,
1531 };
1532
1533 static const struct cxl_service_layer_ops xsl_ops = {
1534 .adapter_regs_init = init_implementation_adapter_xsl_regs,
1535 .debugfs_add_adapter_sl_regs = cxl_debugfs_add_adapter_xsl_regs,
1536 .write_timebase_ctrl = write_timebase_ctrl_xsl,
1537 .timebase_read = timebase_read_xsl,
1538 .capi_mode = OPAL_PHB_CAPI_MODE_DMA,
1539 };
1540
set_sl_ops(struct cxl * adapter,struct pci_dev * dev)1541 static void set_sl_ops(struct cxl *adapter, struct pci_dev *dev)
1542 {
1543 if (dev->vendor == PCI_VENDOR_ID_MELLANOX && dev->device == 0x1013) {
1544 /* Mellanox CX-4 */
1545 dev_info(&dev->dev, "Device uses an XSL\n");
1546 adapter->native->sl_ops = &xsl_ops;
1547 adapter->min_pe = 1; /* Workaround for CX-4 hardware bug */
1548 } else {
1549 dev_info(&dev->dev, "Device uses a PSL\n");
1550 adapter->native->sl_ops = &psl_ops;
1551 }
1552 }
1553
1554
cxl_pci_init_adapter(struct pci_dev * dev)1555 static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev)
1556 {
1557 struct cxl *adapter;
1558 int rc;
1559
1560 adapter = cxl_alloc_adapter();
1561 if (!adapter)
1562 return ERR_PTR(-ENOMEM);
1563
1564 adapter->native = kzalloc(sizeof(struct cxl_native), GFP_KERNEL);
1565 if (!adapter->native) {
1566 rc = -ENOMEM;
1567 goto err_release;
1568 }
1569
1570 set_sl_ops(adapter, dev);
1571
1572 /* Set defaults for parameters which need to persist over
1573 * configure/reconfigure
1574 */
1575 adapter->perst_loads_image = true;
1576 adapter->perst_same_image = false;
1577
1578 rc = cxl_configure_adapter(adapter, dev);
1579 if (rc) {
1580 pci_disable_device(dev);
1581 goto err_release;
1582 }
1583
1584 /* Don't care if this one fails: */
1585 cxl_debugfs_adapter_add(adapter);
1586
1587 /*
1588 * After we call this function we must not free the adapter directly,
1589 * even if it returns an error!
1590 */
1591 if ((rc = cxl_register_adapter(adapter)))
1592 goto err_put1;
1593
1594 if ((rc = cxl_sysfs_adapter_add(adapter)))
1595 goto err_put1;
1596
1597 /* Release the context lock as adapter is configured */
1598 cxl_adapter_context_unlock(adapter);
1599
1600 return adapter;
1601
1602 err_put1:
1603 /* This should mirror cxl_remove_adapter, except without the
1604 * sysfs parts
1605 */
1606 cxl_debugfs_adapter_remove(adapter);
1607 cxl_deconfigure_adapter(adapter);
1608 device_unregister(&adapter->dev);
1609 return ERR_PTR(rc);
1610
1611 err_release:
1612 cxl_release_adapter(&adapter->dev);
1613 return ERR_PTR(rc);
1614 }
1615
cxl_pci_remove_adapter(struct cxl * adapter)1616 static void cxl_pci_remove_adapter(struct cxl *adapter)
1617 {
1618 pr_devel("cxl_remove_adapter\n");
1619
1620 cxl_sysfs_adapter_remove(adapter);
1621 cxl_debugfs_adapter_remove(adapter);
1622
1623 /* Flush adapter datacache as its about to be removed */
1624 cxl_data_cache_flush(adapter);
1625
1626 cxl_deconfigure_adapter(adapter);
1627
1628 device_unregister(&adapter->dev);
1629 }
1630
1631 #define CXL_MAX_PCIEX_PARENT 2
1632
cxl_slot_is_switched(struct pci_dev * dev)1633 static int cxl_slot_is_switched(struct pci_dev *dev)
1634 {
1635 struct device_node *np;
1636 int depth = 0;
1637 const __be32 *prop;
1638
1639 if (!(np = pci_device_to_OF_node(dev))) {
1640 pr_err("cxl: np = NULL\n");
1641 return -ENODEV;
1642 }
1643 of_node_get(np);
1644 while (np) {
1645 np = of_get_next_parent(np);
1646 prop = of_get_property(np, "device_type", NULL);
1647 if (!prop || strcmp((char *)prop, "pciex"))
1648 break;
1649 depth++;
1650 }
1651 of_node_put(np);
1652 return (depth > CXL_MAX_PCIEX_PARENT);
1653 }
1654
cxl_slot_is_supported(struct pci_dev * dev,int flags)1655 bool cxl_slot_is_supported(struct pci_dev *dev, int flags)
1656 {
1657 if (!cpu_has_feature(CPU_FTR_HVMODE))
1658 return false;
1659
1660 if ((flags & CXL_SLOT_FLAG_DMA) && (!pvr_version_is(PVR_POWER8NVL))) {
1661 /*
1662 * CAPP DMA mode is technically supported on regular P8, but
1663 * will EEH if the card attempts to access memory < 4GB, which
1664 * we cannot realistically avoid. We might be able to work
1665 * around the issue, but until then return unsupported:
1666 */
1667 return false;
1668 }
1669
1670 if (cxl_slot_is_switched(dev))
1671 return false;
1672
1673 /*
1674 * XXX: This gets a little tricky on regular P8 (not POWER8NVL) since
1675 * the CAPP can be connected to PHB 0, 1 or 2 on a first come first
1676 * served basis, which is racy to check from here. If we need to
1677 * support this in future we might need to consider having this
1678 * function effectively reserve it ahead of time.
1679 *
1680 * Currently, the only user of this API is the Mellanox CX4, which is
1681 * only supported on P8NVL due to the above mentioned limitation of
1682 * CAPP DMA mode and therefore does not need to worry about this. If the
1683 * issue with CAPP DMA mode is later worked around on P8 we might need
1684 * to revisit this.
1685 */
1686
1687 return true;
1688 }
1689 EXPORT_SYMBOL_GPL(cxl_slot_is_supported);
1690
1691
cxl_probe(struct pci_dev * dev,const struct pci_device_id * id)1692 static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
1693 {
1694 struct cxl *adapter;
1695 int slice;
1696 int rc;
1697
1698 if (cxl_pci_is_vphb_device(dev)) {
1699 dev_dbg(&dev->dev, "cxl_init_adapter: Ignoring cxl vphb device\n");
1700 return -ENODEV;
1701 }
1702
1703 if (cxl_slot_is_switched(dev)) {
1704 dev_info(&dev->dev, "Ignoring card on incompatible PCI slot\n");
1705 return -ENODEV;
1706 }
1707
1708 if (cxl_verbose)
1709 dump_cxl_config_space(dev);
1710
1711 adapter = cxl_pci_init_adapter(dev);
1712 if (IS_ERR(adapter)) {
1713 dev_err(&dev->dev, "cxl_init_adapter failed: %li\n", PTR_ERR(adapter));
1714 return PTR_ERR(adapter);
1715 }
1716
1717 for (slice = 0; slice < adapter->slices; slice++) {
1718 if ((rc = pci_init_afu(adapter, slice, dev))) {
1719 dev_err(&dev->dev, "AFU %i failed to initialise: %i\n", slice, rc);
1720 continue;
1721 }
1722
1723 rc = cxl_afu_select_best_mode(adapter->afu[slice]);
1724 if (rc)
1725 dev_err(&dev->dev, "AFU %i failed to start: %i\n", slice, rc);
1726 }
1727
1728 if (pnv_pci_on_cxl_phb(dev) && adapter->slices >= 1)
1729 pnv_cxl_phb_set_peer_afu(dev, adapter->afu[0]);
1730
1731 return 0;
1732 }
1733
cxl_remove(struct pci_dev * dev)1734 static void cxl_remove(struct pci_dev *dev)
1735 {
1736 struct cxl *adapter = pci_get_drvdata(dev);
1737 struct cxl_afu *afu;
1738 int i;
1739
1740 /*
1741 * Lock to prevent someone grabbing a ref through the adapter list as
1742 * we are removing it
1743 */
1744 for (i = 0; i < adapter->slices; i++) {
1745 afu = adapter->afu[i];
1746 cxl_pci_remove_afu(afu);
1747 }
1748 cxl_pci_remove_adapter(adapter);
1749 }
1750
cxl_vphb_error_detected(struct cxl_afu * afu,pci_channel_state_t state)1751 static pci_ers_result_t cxl_vphb_error_detected(struct cxl_afu *afu,
1752 pci_channel_state_t state)
1753 {
1754 struct pci_dev *afu_dev;
1755 pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET;
1756 pci_ers_result_t afu_result = PCI_ERS_RESULT_NEED_RESET;
1757
1758 /* There should only be one entry, but go through the list
1759 * anyway
1760 */
1761 if (afu->phb == NULL)
1762 return result;
1763
1764 list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
1765 if (!afu_dev->driver)
1766 continue;
1767
1768 afu_dev->error_state = state;
1769
1770 if (afu_dev->driver->err_handler)
1771 afu_result = afu_dev->driver->err_handler->error_detected(afu_dev,
1772 state);
1773 /* Disconnect trumps all, NONE trumps NEED_RESET */
1774 if (afu_result == PCI_ERS_RESULT_DISCONNECT)
1775 result = PCI_ERS_RESULT_DISCONNECT;
1776 else if ((afu_result == PCI_ERS_RESULT_NONE) &&
1777 (result == PCI_ERS_RESULT_NEED_RESET))
1778 result = PCI_ERS_RESULT_NONE;
1779 }
1780 return result;
1781 }
1782
cxl_pci_error_detected(struct pci_dev * pdev,pci_channel_state_t state)1783 static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev,
1784 pci_channel_state_t state)
1785 {
1786 struct cxl *adapter = pci_get_drvdata(pdev);
1787 struct cxl_afu *afu;
1788 pci_ers_result_t result = PCI_ERS_RESULT_NEED_RESET, afu_result;
1789 int i;
1790
1791 /* At this point, we could still have an interrupt pending.
1792 * Let's try to get them out of the way before they do
1793 * anything we don't like.
1794 */
1795 schedule();
1796
1797 /* If we're permanently dead, give up. */
1798 if (state == pci_channel_io_perm_failure) {
1799 /* Tell the AFU drivers; but we don't care what they
1800 * say, we're going away.
1801 */
1802 for (i = 0; i < adapter->slices; i++) {
1803 afu = adapter->afu[i];
1804 /* Only participate in EEH if we are on a virtual PHB */
1805 if (afu->phb == NULL)
1806 return PCI_ERS_RESULT_NONE;
1807
1808 /*
1809 * Tell the AFU drivers; but we don't care what they
1810 * say, we're going away.
1811 */
1812 cxl_vphb_error_detected(afu, state);
1813 }
1814 return PCI_ERS_RESULT_DISCONNECT;
1815 }
1816
1817 /* Are we reflashing?
1818 *
1819 * If we reflash, we could come back as something entirely
1820 * different, including a non-CAPI card. As such, by default
1821 * we don't participate in the process. We'll be unbound and
1822 * the slot re-probed. (TODO: check EEH doesn't blindly rebind
1823 * us!)
1824 *
1825 * However, this isn't the entire story: for reliablity
1826 * reasons, we usually want to reflash the FPGA on PERST in
1827 * order to get back to a more reliable known-good state.
1828 *
1829 * This causes us a bit of a problem: if we reflash we can't
1830 * trust that we'll come back the same - we could have a new
1831 * image and been PERSTed in order to load that
1832 * image. However, most of the time we actually *will* come
1833 * back the same - for example a regular EEH event.
1834 *
1835 * Therefore, we allow the user to assert that the image is
1836 * indeed the same and that we should continue on into EEH
1837 * anyway.
1838 */
1839 if (adapter->perst_loads_image && !adapter->perst_same_image) {
1840 /* TODO take the PHB out of CXL mode */
1841 dev_info(&pdev->dev, "reflashing, so opting out of EEH!\n");
1842 return PCI_ERS_RESULT_NONE;
1843 }
1844
1845 /*
1846 * At this point, we want to try to recover. We'll always
1847 * need a complete slot reset: we don't trust any other reset.
1848 *
1849 * Now, we go through each AFU:
1850 * - We send the driver, if bound, an error_detected callback.
1851 * We expect it to clean up, but it can also tell us to give
1852 * up and permanently detach the card. To simplify things, if
1853 * any bound AFU driver doesn't support EEH, we give up on EEH.
1854 *
1855 * - We detach all contexts associated with the AFU. This
1856 * does not free them, but puts them into a CLOSED state
1857 * which causes any the associated files to return useful
1858 * errors to userland. It also unmaps, but does not free,
1859 * any IRQs.
1860 *
1861 * - We clean up our side: releasing and unmapping resources we hold
1862 * so we can wire them up again when the hardware comes back up.
1863 *
1864 * Driver authors should note:
1865 *
1866 * - Any contexts you create in your kernel driver (except
1867 * those associated with anonymous file descriptors) are
1868 * your responsibility to free and recreate. Likewise with
1869 * any attached resources.
1870 *
1871 * - We will take responsibility for re-initialising the
1872 * device context (the one set up for you in
1873 * cxl_pci_enable_device_hook and accessed through
1874 * cxl_get_context). If you've attached IRQs or other
1875 * resources to it, they remains yours to free.
1876 *
1877 * You can call the same functions to release resources as you
1878 * normally would: we make sure that these functions continue
1879 * to work when the hardware is down.
1880 *
1881 * Two examples:
1882 *
1883 * 1) If you normally free all your resources at the end of
1884 * each request, or if you use anonymous FDs, your
1885 * error_detected callback can simply set a flag to tell
1886 * your driver not to start any new calls. You can then
1887 * clear the flag in the resume callback.
1888 *
1889 * 2) If you normally allocate your resources on startup:
1890 * * Set a flag in error_detected as above.
1891 * * Let CXL detach your contexts.
1892 * * In slot_reset, free the old resources and allocate new ones.
1893 * * In resume, clear the flag to allow things to start.
1894 */
1895 for (i = 0; i < adapter->slices; i++) {
1896 afu = adapter->afu[i];
1897
1898 afu_result = cxl_vphb_error_detected(afu, state);
1899
1900 cxl_context_detach_all(afu);
1901 cxl_ops->afu_deactivate_mode(afu, afu->current_mode);
1902 pci_deconfigure_afu(afu);
1903
1904 /* Disconnect trumps all, NONE trumps NEED_RESET */
1905 if (afu_result == PCI_ERS_RESULT_DISCONNECT)
1906 result = PCI_ERS_RESULT_DISCONNECT;
1907 else if ((afu_result == PCI_ERS_RESULT_NONE) &&
1908 (result == PCI_ERS_RESULT_NEED_RESET))
1909 result = PCI_ERS_RESULT_NONE;
1910 }
1911
1912 /* should take the context lock here */
1913 if (cxl_adapter_context_lock(adapter) != 0)
1914 dev_warn(&adapter->dev,
1915 "Couldn't take context lock with %d active-contexts\n",
1916 atomic_read(&adapter->contexts_num));
1917
1918 cxl_deconfigure_adapter(adapter);
1919
1920 return result;
1921 }
1922
cxl_pci_slot_reset(struct pci_dev * pdev)1923 static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev)
1924 {
1925 struct cxl *adapter = pci_get_drvdata(pdev);
1926 struct cxl_afu *afu;
1927 struct cxl_context *ctx;
1928 struct pci_dev *afu_dev;
1929 pci_ers_result_t afu_result = PCI_ERS_RESULT_RECOVERED;
1930 pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;
1931 int i;
1932
1933 if (cxl_configure_adapter(adapter, pdev))
1934 goto err;
1935
1936 /*
1937 * Unlock context activation for the adapter. Ideally this should be
1938 * done in cxl_pci_resume but cxlflash module tries to activate the
1939 * master context as part of slot_reset callback.
1940 */
1941 cxl_adapter_context_unlock(adapter);
1942
1943 for (i = 0; i < adapter->slices; i++) {
1944 afu = adapter->afu[i];
1945
1946 if (pci_configure_afu(afu, adapter, pdev))
1947 goto err;
1948
1949 if (cxl_afu_select_best_mode(afu))
1950 goto err;
1951
1952 if (afu->phb == NULL)
1953 continue;
1954
1955 list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
1956 /* Reset the device context.
1957 * TODO: make this less disruptive
1958 */
1959 ctx = cxl_get_context(afu_dev);
1960
1961 if (ctx && cxl_release_context(ctx))
1962 goto err;
1963
1964 ctx = cxl_dev_context_init(afu_dev);
1965 if (!ctx)
1966 goto err;
1967
1968 afu_dev->dev.archdata.cxl_ctx = ctx;
1969
1970 if (cxl_ops->afu_check_and_enable(afu))
1971 goto err;
1972
1973 afu_dev->error_state = pci_channel_io_normal;
1974
1975 /* If there's a driver attached, allow it to
1976 * chime in on recovery. Drivers should check
1977 * if everything has come back OK, but
1978 * shouldn't start new work until we call
1979 * their resume function.
1980 */
1981 if (!afu_dev->driver)
1982 continue;
1983
1984 if (afu_dev->driver->err_handler &&
1985 afu_dev->driver->err_handler->slot_reset)
1986 afu_result = afu_dev->driver->err_handler->slot_reset(afu_dev);
1987
1988 if (afu_result == PCI_ERS_RESULT_DISCONNECT)
1989 result = PCI_ERS_RESULT_DISCONNECT;
1990 }
1991 }
1992 return result;
1993
1994 err:
1995 /* All the bits that happen in both error_detected and cxl_remove
1996 * should be idempotent, so we don't need to worry about leaving a mix
1997 * of unconfigured and reconfigured resources.
1998 */
1999 dev_err(&pdev->dev, "EEH recovery failed. Asking to be disconnected.\n");
2000 return PCI_ERS_RESULT_DISCONNECT;
2001 }
2002
cxl_pci_resume(struct pci_dev * pdev)2003 static void cxl_pci_resume(struct pci_dev *pdev)
2004 {
2005 struct cxl *adapter = pci_get_drvdata(pdev);
2006 struct cxl_afu *afu;
2007 struct pci_dev *afu_dev;
2008 int i;
2009
2010 /* Everything is back now. Drivers should restart work now.
2011 * This is not the place to be checking if everything came back up
2012 * properly, because there's no return value: do that in slot_reset.
2013 */
2014 for (i = 0; i < adapter->slices; i++) {
2015 afu = adapter->afu[i];
2016
2017 if (afu->phb == NULL)
2018 continue;
2019
2020 list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) {
2021 if (afu_dev->driver && afu_dev->driver->err_handler &&
2022 afu_dev->driver->err_handler->resume)
2023 afu_dev->driver->err_handler->resume(afu_dev);
2024 }
2025 }
2026 }
2027
2028 static const struct pci_error_handlers cxl_err_handler = {
2029 .error_detected = cxl_pci_error_detected,
2030 .slot_reset = cxl_pci_slot_reset,
2031 .resume = cxl_pci_resume,
2032 };
2033
2034 struct pci_driver cxl_pci_driver = {
2035 .name = "cxl-pci",
2036 .id_table = cxl_pci_tbl,
2037 .probe = cxl_probe,
2038 .remove = cxl_remove,
2039 .shutdown = cxl_remove,
2040 .err_handler = &cxl_err_handler,
2041 };
2042