1 /* -*- mode: c; c-basic-offset: 8 -*- */
2
3 /* Driver for 53c700 and 53c700-66 chips from NCR and Symbios
4 *
5 * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
6 */
7
8 #ifndef _53C700_H
9 #define _53C700_H
10
11 #include <linux/interrupt.h>
12 #include <asm/io.h>
13
14 #include <scsi/scsi_device.h>
15 #include <scsi/scsi_cmnd.h>
16
17 /* Turn on for general debugging---too verbose for normal use */
18 #undef NCR_700_DEBUG
19 /* Debug the tag queues, checking hash queue allocation and deallocation
20 * and search for duplicate tags */
21 #undef NCR_700_TAG_DEBUG
22
23 #ifdef NCR_700_DEBUG
24 #define DEBUG(x) printk x
25 #define DDEBUG(prefix, sdev, fmt, a...) \
26 sdev_printk(prefix, sdev, fmt, ##a)
27 #define CDEBUG(prefix, scmd, fmt, a...) \
28 scmd_printk(prefix, scmd, fmt, ##a)
29 #else
30 #define DEBUG(x) do {} while (0)
31 #define DDEBUG(prefix, scmd, fmt, a...) do {} while (0)
32 #define CDEBUG(prefix, scmd, fmt, a...) do {} while (0)
33 #endif
34
35 /* The number of available command slots */
36 #define NCR_700_COMMAND_SLOTS_PER_HOST 64
37 /* The maximum number of Scatter Gathers we allow */
38 #define NCR_700_SG_SEGMENTS 32
39 /* The maximum number of luns (make this of the form 2^n) */
40 #define NCR_700_MAX_LUNS 32
41 #define NCR_700_LUN_MASK (NCR_700_MAX_LUNS - 1)
42 /* Maximum number of tags the driver ever allows per device */
43 #define NCR_700_MAX_TAGS 16
44 /* Tag depth the driver starts out with (can be altered in sysfs) */
45 #define NCR_700_DEFAULT_TAGS 4
46 /* This is the default number of commands per LUN in the untagged case.
47 * two is a good value because it means we can have one command active and
48 * one command fully prepared and waiting
49 */
50 #define NCR_700_CMD_PER_LUN 2
51 /* magic byte identifying an internally generated REQUEST_SENSE command */
52 #define NCR_700_INTERNAL_SENSE_MAGIC 0x42
53
54 struct NCR_700_Host_Parameters;
55
56 /* These are the externally used routines */
57 struct Scsi_Host *NCR_700_detect(struct scsi_host_template *,
58 struct NCR_700_Host_Parameters *, struct device *);
59 int NCR_700_release(struct Scsi_Host *host);
60 irqreturn_t NCR_700_intr(int, void *);
61
62
63 enum NCR_700_Host_State {
64 NCR_700_HOST_BUSY,
65 NCR_700_HOST_FREE,
66 };
67
68 struct NCR_700_SG_List {
69 /* The following is a script fragment to move the buffer onto the
70 * bus and then link the next fragment or return */
71 #define SCRIPT_MOVE_DATA_IN 0x09000000
72 #define SCRIPT_MOVE_DATA_OUT 0x08000000
73 __u32 ins;
74 __u32 pAddr;
75 #define SCRIPT_NOP 0x80000000
76 #define SCRIPT_RETURN 0x90080000
77 };
78
79 struct NCR_700_Device_Parameters {
80 /* space for creating a request sense command. Really, except
81 * for the annoying SCSI-2 requirement for LUN information in
82 * cmnd[1], this could be in static storage */
83 unsigned char cmnd[MAX_COMMAND_SIZE];
84 __u8 depth;
85 struct scsi_cmnd *current_cmnd; /* currently active command */
86 };
87
88
89 /* The SYNC negotiation sequence looks like:
90 *
91 * If DEV_NEGOTIATED_SYNC not set, tack and SDTR message on to the
92 * initial identify for the device and set DEV_BEGIN_SYNC_NEGOTATION
93 * If we get an SDTR reply, work out the SXFER parameters, squirrel
94 * them away here, clear DEV_BEGIN_SYNC_NEGOTIATION and set
95 * DEV_NEGOTIATED_SYNC. If we get a REJECT msg, squirrel
96 *
97 *
98 * 0:7 SXFER_REG negotiated value for this device
99 * 8:15 Current queue depth
100 * 16 negotiated SYNC flag
101 * 17 begin SYNC negotiation flag
102 * 18 device supports tag queueing */
103 #define NCR_700_DEV_NEGOTIATED_SYNC (1<<16)
104 #define NCR_700_DEV_BEGIN_SYNC_NEGOTIATION (1<<17)
105 #define NCR_700_DEV_PRINT_SYNC_NEGOTIATION (1<<19)
106
NCR_700_get_sense_cmnd(struct scsi_device * SDp)107 static inline char *NCR_700_get_sense_cmnd(struct scsi_device *SDp)
108 {
109 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
110
111 return hostdata->cmnd;
112 }
113
114 static inline void
NCR_700_set_depth(struct scsi_device * SDp,__u8 depth)115 NCR_700_set_depth(struct scsi_device *SDp, __u8 depth)
116 {
117 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
118
119 hostdata->depth = depth;
120 }
121 static inline __u8
NCR_700_get_depth(struct scsi_device * SDp)122 NCR_700_get_depth(struct scsi_device *SDp)
123 {
124 struct NCR_700_Device_Parameters *hostdata = SDp->hostdata;
125
126 return hostdata->depth;
127 }
128 static inline int
NCR_700_is_flag_set(struct scsi_device * SDp,__u32 flag)129 NCR_700_is_flag_set(struct scsi_device *SDp, __u32 flag)
130 {
131 return (spi_flags(SDp->sdev_target) & flag) == flag;
132 }
133 static inline int
NCR_700_is_flag_clear(struct scsi_device * SDp,__u32 flag)134 NCR_700_is_flag_clear(struct scsi_device *SDp, __u32 flag)
135 {
136 return (spi_flags(SDp->sdev_target) & flag) == 0;
137 }
138 static inline void
NCR_700_set_flag(struct scsi_device * SDp,__u32 flag)139 NCR_700_set_flag(struct scsi_device *SDp, __u32 flag)
140 {
141 spi_flags(SDp->sdev_target) |= flag;
142 }
143 static inline void
NCR_700_clear_flag(struct scsi_device * SDp,__u32 flag)144 NCR_700_clear_flag(struct scsi_device *SDp, __u32 flag)
145 {
146 spi_flags(SDp->sdev_target) &= ~flag;
147 }
148
149 enum NCR_700_tag_neg_state {
150 NCR_700_START_TAG_NEGOTIATION = 0,
151 NCR_700_DURING_TAG_NEGOTIATION = 1,
152 NCR_700_FINISHED_TAG_NEGOTIATION = 2,
153 };
154
155 static inline enum NCR_700_tag_neg_state
NCR_700_get_tag_neg_state(struct scsi_device * SDp)156 NCR_700_get_tag_neg_state(struct scsi_device *SDp)
157 {
158 return (enum NCR_700_tag_neg_state)((spi_flags(SDp->sdev_target)>>20) & 0x3);
159 }
160
161 static inline void
NCR_700_set_tag_neg_state(struct scsi_device * SDp,enum NCR_700_tag_neg_state state)162 NCR_700_set_tag_neg_state(struct scsi_device *SDp,
163 enum NCR_700_tag_neg_state state)
164 {
165 /* clear the slot */
166 spi_flags(SDp->sdev_target) &= ~(0x3 << 20);
167 spi_flags(SDp->sdev_target) |= ((__u32)state) << 20;
168 }
169
170 struct NCR_700_command_slot {
171 struct NCR_700_SG_List SG[NCR_700_SG_SEGMENTS+1];
172 struct NCR_700_SG_List *pSG;
173 #define NCR_700_SLOT_MASK 0xFC
174 #define NCR_700_SLOT_MAGIC 0xb8
175 #define NCR_700_SLOT_FREE (0|NCR_700_SLOT_MAGIC) /* slot may be used */
176 #define NCR_700_SLOT_BUSY (1|NCR_700_SLOT_MAGIC) /* slot has command active on HA */
177 #define NCR_700_SLOT_QUEUED (2|NCR_700_SLOT_MAGIC) /* slot has command to be made active on HA */
178 __u8 state;
179 #define NCR_700_FLAG_AUTOSENSE 0x01
180 __u8 flags;
181 __u8 pad1[2]; /* Needed for m68k where min alignment is 2 bytes */
182 int tag;
183 __u32 resume_offset;
184 struct scsi_cmnd *cmnd;
185 /* The pci_mapped address of the actual command in cmnd */
186 dma_addr_t pCmd;
187 __u32 temp;
188 /* if this command is a pci_single mapping, holds the dma address
189 * for later unmapping in the done routine */
190 dma_addr_t dma_handle;
191 /* historical remnant, now used to link free commands */
192 struct NCR_700_command_slot *ITL_forw;
193 };
194
195 struct NCR_700_Host_Parameters {
196 /* These must be filled in by the calling driver */
197 int clock; /* board clock speed in MHz */
198 void __iomem *base; /* the base for the port (copied to host) */
199 struct device *dev;
200 __u32 dmode_extra; /* adjustable bus settings */
201 __u32 dcntl_extra; /* adjustable bus settings */
202 __u32 ctest7_extra; /* adjustable bus settings */
203 __u32 differential:1; /* if we are differential */
204 #ifdef CONFIG_53C700_LE_ON_BE
205 /* This option is for HP only. Set it if your chip is wired for
206 * little endian on this platform (which is big endian) */
207 __u32 force_le_on_be:1;
208 #endif
209 __u32 chip710:1; /* set if really a 710 not 700 */
210 __u32 burst_length:4; /* set to 0 to disable 710 bursting */
211
212 /* NOTHING BELOW HERE NEEDS ALTERING */
213 __u32 fast:1; /* if we can alter the SCSI bus clock
214 speed (so can negiotiate sync) */
215 int sync_clock; /* The speed of the SYNC core */
216
217 __u32 *script; /* pointer to script location */
218 __u32 pScript; /* physical mem addr of script */
219
220 enum NCR_700_Host_State state; /* protected by state lock */
221 struct scsi_cmnd *cmd;
222 /* Note: pScript contains the single consistent block of
223 * memory. All the msgin, msgout and status are allocated in
224 * this memory too (at separate cache lines). TOTAL_MEM_SIZE
225 * represents the total size of this area */
226 #define MSG_ARRAY_SIZE 8
227 #define MSGOUT_OFFSET (L1_CACHE_ALIGN(sizeof(SCRIPT)))
228 __u8 *msgout;
229 #define MSGIN_OFFSET (MSGOUT_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
230 __u8 *msgin;
231 #define STATUS_OFFSET (MSGIN_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
232 __u8 *status;
233 #define SLOTS_OFFSET (STATUS_OFFSET + L1_CACHE_ALIGN(MSG_ARRAY_SIZE))
234 struct NCR_700_command_slot *slots;
235 #define TOTAL_MEM_SIZE (SLOTS_OFFSET + L1_CACHE_ALIGN(sizeof(struct NCR_700_command_slot) * NCR_700_COMMAND_SLOTS_PER_HOST))
236 int saved_slot_position;
237 int command_slot_count; /* protected by state lock */
238 __u8 tag_negotiated;
239 __u8 rev;
240 __u8 reselection_id;
241 __u8 min_period;
242
243 /* Free list, singly linked by ITL_forw elements */
244 struct NCR_700_command_slot *free_list;
245 /* Completion for waited for ops, like reset, abort or
246 * device reset.
247 *
248 * NOTE: relies on single threading in the error handler to
249 * have only one outstanding at once */
250 struct completion *eh_complete;
251 };
252
253 /*
254 * 53C700 Register Interface - the offset from the Selected base
255 * I/O address */
256 #ifdef CONFIG_53C700_LE_ON_BE
257 #define bE (hostdata->force_le_on_be ? 0 : 3)
258 #define bSWAP (hostdata->force_le_on_be)
259 #define bEBus (!hostdata->force_le_on_be)
260 #elif defined(__BIG_ENDIAN)
261 #define bE 3
262 #define bSWAP 0
263 #elif defined(__LITTLE_ENDIAN)
264 #define bE 0
265 #define bSWAP 0
266 #else
267 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined, did you include byteorder.h?"
268 #endif
269 #ifndef bEBus
270 #ifdef CONFIG_53C700_BE_BUS
271 #define bEBus 1
272 #else
273 #define bEBus 0
274 #endif
275 #endif
276 #define bS_to_cpu(x) (bSWAP ? le32_to_cpu(x) : (x))
277 #define bS_to_host(x) (bSWAP ? cpu_to_le32(x) : (x))
278
279 /* NOTE: These registers are in the LE register space only, the required byte
280 * swapping is done by the NCR_700_{read|write}[b] functions */
281 #define SCNTL0_REG 0x00
282 #define FULL_ARBITRATION 0xc0
283 #define PARITY 0x08
284 #define ENABLE_PARITY 0x04
285 #define AUTO_ATN 0x02
286 #define SCNTL1_REG 0x01
287 #define SLOW_BUS 0x80
288 #define ENABLE_SELECT 0x20
289 #define ASSERT_RST 0x08
290 #define ASSERT_EVEN_PARITY 0x04
291 #define SDID_REG 0x02
292 #define SIEN_REG 0x03
293 #define PHASE_MM_INT 0x80
294 #define FUNC_COMP_INT 0x40
295 #define SEL_TIMEOUT_INT 0x20
296 #define SELECT_INT 0x10
297 #define GROSS_ERR_INT 0x08
298 #define UX_DISC_INT 0x04
299 #define RST_INT 0x02
300 #define PAR_ERR_INT 0x01
301 #define SCID_REG 0x04
302 #define SXFER_REG 0x05
303 #define ASYNC_OPERATION 0x00
304 #define SODL_REG 0x06
305 #define SOCL_REG 0x07
306 #define SFBR_REG 0x08
307 #define SIDL_REG 0x09
308 #define SBDL_REG 0x0A
309 #define SBCL_REG 0x0B
310 /* read bits */
311 #define SBCL_IO 0x01
312 /*write bits */
313 #define SYNC_DIV_AS_ASYNC 0x00
314 #define SYNC_DIV_1_0 0x01
315 #define SYNC_DIV_1_5 0x02
316 #define SYNC_DIV_2_0 0x03
317 #define DSTAT_REG 0x0C
318 #define ILGL_INST_DETECTED 0x01
319 #define WATCH_DOG_INTERRUPT 0x02
320 #define SCRIPT_INT_RECEIVED 0x04
321 #define ABORTED 0x10
322 #define SSTAT0_REG 0x0D
323 #define PARITY_ERROR 0x01
324 #define SCSI_RESET_DETECTED 0x02
325 #define UNEXPECTED_DISCONNECT 0x04
326 #define SCSI_GROSS_ERROR 0x08
327 #define SELECTED 0x10
328 #define SELECTION_TIMEOUT 0x20
329 #define FUNCTION_COMPLETE 0x40
330 #define PHASE_MISMATCH 0x80
331 #define SSTAT1_REG 0x0E
332 #define SIDL_REG_FULL 0x80
333 #define SODR_REG_FULL 0x40
334 #define SODL_REG_FULL 0x20
335 #define SSTAT2_REG 0x0F
336 #define CTEST0_REG 0x14
337 #define BTB_TIMER_DISABLE 0x40
338 #define CTEST1_REG 0x15
339 #define CTEST2_REG 0x16
340 #define CTEST3_REG 0x17
341 #define CTEST4_REG 0x18
342 #define DISABLE_FIFO 0x00
343 #define SLBE 0x10
344 #define SFWR 0x08
345 #define BYTE_LANE0 0x04
346 #define BYTE_LANE1 0x05
347 #define BYTE_LANE2 0x06
348 #define BYTE_LANE3 0x07
349 #define SCSI_ZMODE 0x20
350 #define ZMODE 0x40
351 #define CTEST5_REG 0x19
352 #define MASTER_CONTROL 0x10
353 #define DMA_DIRECTION 0x08
354 #define CTEST7_REG 0x1B
355 #define BURST_DISABLE 0x80 /* 710 only */
356 #define SEL_TIMEOUT_DISABLE 0x10 /* 710 only */
357 #define DFP 0x08
358 #define EVP 0x04
359 #define CTEST7_TT1 0x02
360 #define DIFF 0x01
361 #define CTEST6_REG 0x1A
362 #define TEMP_REG 0x1C
363 #define DFIFO_REG 0x20
364 #define FLUSH_DMA_FIFO 0x80
365 #define CLR_FIFO 0x40
366 #define ISTAT_REG 0x21
367 #define ABORT_OPERATION 0x80
368 #define SOFTWARE_RESET_710 0x40
369 #define DMA_INT_PENDING 0x01
370 #define SCSI_INT_PENDING 0x02
371 #define CONNECTED 0x08
372 #define CTEST8_REG 0x22
373 #define LAST_DIS_ENBL 0x01
374 #define SHORTEN_FILTERING 0x04
375 #define ENABLE_ACTIVE_NEGATION 0x10
376 #define GENERATE_RECEIVE_PARITY 0x20
377 #define CLR_FIFO_710 0x04
378 #define FLUSH_DMA_FIFO_710 0x08
379 #define CTEST9_REG 0x23
380 #define DBC_REG 0x24
381 #define DCMD_REG 0x27
382 #define DNAD_REG 0x28
383 #define DIEN_REG 0x39
384 #define BUS_FAULT 0x20
385 #define ABORT_INT 0x10
386 #define INT_INST_INT 0x04
387 #define WD_INT 0x02
388 #define ILGL_INST_INT 0x01
389 #define DCNTL_REG 0x3B
390 #define SOFTWARE_RESET 0x01
391 #define COMPAT_700_MODE 0x01
392 #define SCRPTS_16BITS 0x20
393 #define EA_710 0x20
394 #define ASYNC_DIV_2_0 0x00
395 #define ASYNC_DIV_1_5 0x40
396 #define ASYNC_DIV_1_0 0x80
397 #define ASYNC_DIV_3_0 0xc0
398 #define DMODE_710_REG 0x38
399 #define DMODE_700_REG 0x34
400 #define BURST_LENGTH_1 0x00
401 #define BURST_LENGTH_2 0x40
402 #define BURST_LENGTH_4 0x80
403 #define BURST_LENGTH_8 0xC0
404 #define DMODE_FC1 0x10
405 #define DMODE_FC2 0x20
406 #define BW16 32
407 #define MODE_286 16
408 #define IO_XFER 8
409 #define FIXED_ADDR 4
410
411 #define DSP_REG 0x2C
412 #define DSPS_REG 0x30
413
414 /* Parameters to begin SDTR negotiations. Empirically, I find that
415 * the 53c700-66 cannot handle an offset >8, so don't change this */
416 #define NCR_700_MAX_OFFSET 8
417 /* Was hoping the max offset would be greater for the 710, but
418 * empirically it seems to be 8 also */
419 #define NCR_710_MAX_OFFSET 8
420 #define NCR_700_MIN_XFERP 1
421 #define NCR_710_MIN_XFERP 0
422 #define NCR_700_MIN_PERIOD 25 /* for SDTR message, 100ns */
423
424 #define script_patch_32(dev, script, symbol, value) \
425 { \
426 int i; \
427 dma_addr_t da = value; \
428 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
429 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]) + da; \
430 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
431 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
432 DEBUG((" script, patching %s at %d to %pad\n", \
433 #symbol, A_##symbol##_used[i], &da)); \
434 } \
435 }
436
437 #define script_patch_32_abs(dev, script, symbol, value) \
438 { \
439 int i; \
440 dma_addr_t da = value; \
441 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
442 (script)[A_##symbol##_used[i]] = bS_to_host(da); \
443 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
444 DEBUG((" script, patching %s at %d to %pad\n", \
445 #symbol, A_##symbol##_used[i], &da)); \
446 } \
447 }
448
449 /* Used for patching the SCSI ID in the SELECT instruction */
450 #define script_patch_ID(dev, script, symbol, value) \
451 { \
452 int i; \
453 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
454 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
455 val &= 0xff00ffff; \
456 val |= ((value) & 0xff) << 16; \
457 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
458 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
459 DEBUG((" script, patching ID field %s at %d to 0x%x\n", \
460 #symbol, A_##symbol##_used[i], val)); \
461 } \
462 }
463
464 #define script_patch_16(dev, script, symbol, value) \
465 { \
466 int i; \
467 for(i=0; i< (sizeof(A_##symbol##_used) / sizeof(__u32)); i++) { \
468 __u32 val = bS_to_cpu((script)[A_##symbol##_used[i]]); \
469 val &= 0xffff0000; \
470 val |= ((value) & 0xffff); \
471 (script)[A_##symbol##_used[i]] = bS_to_host(val); \
472 dma_cache_sync((dev), &(script)[A_##symbol##_used[i]], 4, DMA_TO_DEVICE); \
473 DEBUG((" script, patching short field %s at %d to 0x%x\n", \
474 #symbol, A_##symbol##_used[i], val)); \
475 } \
476 }
477
478
479 static inline __u8
NCR_700_readb(struct Scsi_Host * host,__u32 reg)480 NCR_700_readb(struct Scsi_Host *host, __u32 reg)
481 {
482 const struct NCR_700_Host_Parameters *hostdata
483 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
484
485 return ioread8(hostdata->base + (reg^bE));
486 }
487
488 static inline __u32
NCR_700_readl(struct Scsi_Host * host,__u32 reg)489 NCR_700_readl(struct Scsi_Host *host, __u32 reg)
490 {
491 const struct NCR_700_Host_Parameters *hostdata
492 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
493 __u32 value = bEBus ? ioread32be(hostdata->base + reg) :
494 ioread32(hostdata->base + reg);
495 #if 1
496 /* sanity check the register */
497 BUG_ON((reg & 0x3) != 0);
498 #endif
499
500 return value;
501 }
502
503 static inline void
NCR_700_writeb(__u8 value,struct Scsi_Host * host,__u32 reg)504 NCR_700_writeb(__u8 value, struct Scsi_Host *host, __u32 reg)
505 {
506 const struct NCR_700_Host_Parameters *hostdata
507 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
508
509 iowrite8(value, hostdata->base + (reg^bE));
510 }
511
512 static inline void
NCR_700_writel(__u32 value,struct Scsi_Host * host,__u32 reg)513 NCR_700_writel(__u32 value, struct Scsi_Host *host, __u32 reg)
514 {
515 const struct NCR_700_Host_Parameters *hostdata
516 = (struct NCR_700_Host_Parameters *)host->hostdata[0];
517
518 #if 1
519 /* sanity check the register */
520 BUG_ON((reg & 0x3) != 0);
521 #endif
522
523 bEBus ? iowrite32be(value, hostdata->base + reg):
524 iowrite32(value, hostdata->base + reg);
525 }
526
527 #endif
528