1 /* 2 * dvb_frontend.h 3 * 4 * The Digital TV Frontend kABI defines a driver-internal interface for 5 * registering low-level, hardware specific driver to a hardware independent 6 * frontend layer. 7 * 8 * Copyright (C) 2001 convergence integrated media GmbH 9 * Copyright (C) 2004 convergence GmbH 10 * 11 * Written by Ralph Metzler 12 * Overhauled by Holger Waechtler 13 * Kernel I2C stuff by Michael Hunold <hunold@convergence.de> 14 * 15 * This program is free software; you can redistribute it and/or 16 * modify it under the terms of the GNU Lesser General Public License 17 * as published by the Free Software Foundation; either version 2.1 18 * of the License, or (at your option) any later version. 19 * 20 * This program is distributed in the hope that it will be useful, 21 * but WITHOUT ANY WARRANTY; without even the implied warranty of 22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 23 * GNU General Public License for more details. 24 * 25 26 * You should have received a copy of the GNU Lesser General Public License 27 * along with this program; if not, write to the Free Software 28 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 29 * 30 */ 31 32 #ifndef _DVB_FRONTEND_H_ 33 #define _DVB_FRONTEND_H_ 34 35 #include <linux/types.h> 36 #include <linux/sched.h> 37 #include <linux/ioctl.h> 38 #include <linux/i2c.h> 39 #include <linux/module.h> 40 #include <linux/errno.h> 41 #include <linux/delay.h> 42 #include <linux/mutex.h> 43 #include <linux/slab.h> 44 45 #include <linux/dvb/frontend.h> 46 47 #include "dvbdev.h" 48 49 /* 50 * Maximum number of Delivery systems per frontend. It 51 * should be smaller or equal to 32 52 */ 53 #define MAX_DELSYS 8 54 55 /** 56 * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning 57 * 58 * @min_delay_ms: minimum delay for tuning, in ms 59 * @step_size: step size between two consecutive frequencies 60 * @max_drift: maximum drift 61 * 62 * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite 63 */ 64 struct dvb_frontend_tune_settings { 65 int min_delay_ms; 66 int step_size; 67 int max_drift; 68 }; 69 70 struct dvb_frontend; 71 72 /** 73 * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths 74 * 75 * @name: name of the Frontend 76 * @frequency_min: minimal frequency supported 77 * @frequency_max: maximum frequency supported 78 * @frequency_step: frequency step 79 * @bandwidth_min: minimal frontend bandwidth supported 80 * @bandwidth_max: maximum frontend bandwidth supported 81 * @bandwidth_step: frontend bandwidth step 82 * 83 * NOTE: frequency parameters are in Hz, for terrestrial/cable or kHz for 84 * satellite. 85 */ 86 struct dvb_tuner_info { 87 char name[128]; 88 89 u32 frequency_min; 90 u32 frequency_max; 91 u32 frequency_step; 92 93 u32 bandwidth_min; 94 u32 bandwidth_max; 95 u32 bandwidth_step; 96 }; 97 98 /** 99 * struct analog_parameters - Parameters to tune into an analog/radio channel 100 * 101 * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, 102 * for TV, or 62.5 Hz for radio) 103 * @mode: Tuner mode, as defined on enum v4l2_tuner_type 104 * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, 105 * e. g. V4L2_TUNER_MODE_* 106 * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* 107 * 108 * Hybrid tuners should be supported by both V4L2 and DVB APIs. This 109 * struct contains the data that are used by the V4L2 side. To avoid 110 * dependencies from V4L2 headers, all enums here are declared as integers. 111 */ 112 struct analog_parameters { 113 unsigned int frequency; 114 unsigned int mode; 115 unsigned int audmode; 116 u64 std; 117 }; 118 119 /** 120 * enum dvbfe_algo - defines the algorithm used to tune into a channel 121 * 122 * @DVBFE_ALGO_HW: Hardware Algorithm - 123 * Devices that support this algorithm do everything in hardware 124 * and no software support is needed to handle them. 125 * Requesting these devices to LOCK is the only thing required, 126 * device is supposed to do everything in the hardware. 127 * 128 * @DVBFE_ALGO_SW: Software Algorithm - 129 * These are dumb devices, that require software to do everything 130 * 131 * @DVBFE_ALGO_CUSTOM: Customizable Agorithm - 132 * Devices having this algorithm can be customized to have specific 133 * algorithms in the frontend driver, rather than simply doing a 134 * software zig-zag. In this case the zigzag maybe hardware assisted 135 * or it maybe completely done in hardware. In all cases, usage of 136 * this algorithm, in conjunction with the search and track 137 * callbacks, utilizes the driver specific algorithm. 138 * 139 * @DVBFE_ALGO_RECOVERY: Recovery Algorithm - 140 * These devices have AUTO recovery capabilities from LOCK failure 141 */ 142 enum dvbfe_algo { 143 DVBFE_ALGO_HW = (1 << 0), 144 DVBFE_ALGO_SW = (1 << 1), 145 DVBFE_ALGO_CUSTOM = (1 << 2), 146 DVBFE_ALGO_RECOVERY = (1 << 31) 147 }; 148 149 /** 150 * enum dvbfe_search - search callback possible return status 151 * 152 * @DVBFE_ALGO_SEARCH_SUCCESS: 153 * The frontend search algorithm completed and returned successfully 154 * 155 * @DVBFE_ALGO_SEARCH_ASLEEP: 156 * The frontend search algorithm is sleeping 157 * 158 * @DVBFE_ALGO_SEARCH_FAILED: 159 * The frontend search for a signal failed 160 * 161 * @DVBFE_ALGO_SEARCH_INVALID: 162 * The frontend search algorith was probably supplied with invalid 163 * parameters and the search is an invalid one 164 * 165 * @DVBFE_ALGO_SEARCH_ERROR: 166 * The frontend search algorithm failed due to some error 167 * 168 * @DVBFE_ALGO_SEARCH_AGAIN: 169 * The frontend search algorithm was requested to search again 170 */ 171 enum dvbfe_search { 172 DVBFE_ALGO_SEARCH_SUCCESS = (1 << 0), 173 DVBFE_ALGO_SEARCH_ASLEEP = (1 << 1), 174 DVBFE_ALGO_SEARCH_FAILED = (1 << 2), 175 DVBFE_ALGO_SEARCH_INVALID = (1 << 3), 176 DVBFE_ALGO_SEARCH_AGAIN = (1 << 4), 177 DVBFE_ALGO_SEARCH_ERROR = (1 << 31), 178 }; 179 180 /** 181 * struct dvb_tuner_ops - Tuner information and callbacks 182 * 183 * @info: embedded struct dvb_tuner_info with tuner properties 184 * @release: callback function called when frontend is dettached. 185 * drivers should free any allocated memory. 186 * @init: callback function used to initialize the tuner device. 187 * @sleep: callback function used to put the tuner to sleep. 188 * @suspend: callback function used to inform that the Kernel will 189 * suspend. 190 * @resume: callback function used to inform that the Kernel is 191 * resuming from suspend. 192 * @set_params: callback function used to inform the tuner to tune 193 * into a digital TV channel. The properties to be used 194 * are stored at @dvb_frontend.dtv_property_cache;. The 195 * tuner demod can change the parameters to reflect the 196 * changes needed for the channel to be tuned, and 197 * update statistics. This is the recommended way to set 198 * the tuner parameters and should be used on newer 199 * drivers. 200 * @set_analog_params: callback function used to tune into an analog TV 201 * channel on hybrid tuners. It passes @analog_parameters; 202 * to the driver. 203 * @set_config: callback function used to send some tuner-specific 204 * parameters. 205 * @get_frequency: get the actual tuned frequency 206 * @get_bandwidth: get the bandwitdh used by the low pass filters 207 * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, 208 * should return 0. 209 * @get_status: returns the frontend lock status 210 * @get_rf_strength: returns the RF signal strengh. Used mostly to support 211 * analog TV and radio. Digital TV should report, instead, 212 * via DVBv5 API (@dvb_frontend.dtv_property_cache;). 213 * @get_afc: Used only by analog TV core. Reports the frequency 214 * drift due to AFC. 215 * @calc_regs: callback function used to pass register data settings 216 * for simple tuners. Shouldn't be used on newer drivers. 217 * @set_frequency: Set a new frequency. Shouldn't be used on newer drivers. 218 * @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers. 219 * 220 * NOTE: frequencies used on get_frequency and set_frequency are in Hz for 221 * terrestrial/cable or kHz for satellite. 222 * 223 */ 224 struct dvb_tuner_ops { 225 226 struct dvb_tuner_info info; 227 228 int (*release)(struct dvb_frontend *fe); 229 int (*init)(struct dvb_frontend *fe); 230 int (*sleep)(struct dvb_frontend *fe); 231 int (*suspend)(struct dvb_frontend *fe); 232 int (*resume)(struct dvb_frontend *fe); 233 234 /* This is the recomended way to set the tuner */ 235 int (*set_params)(struct dvb_frontend *fe); 236 int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); 237 238 int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); 239 240 int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); 241 int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); 242 int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); 243 244 #define TUNER_STATUS_LOCKED 1 245 #define TUNER_STATUS_STEREO 2 246 int (*get_status)(struct dvb_frontend *fe, u32 *status); 247 int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); 248 int (*get_afc)(struct dvb_frontend *fe, s32 *afc); 249 250 /* 251 * This is support for demods like the mt352 - fills out the supplied 252 * buffer with what to write. 253 * 254 * Don't use on newer drivers. 255 */ 256 int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); 257 258 /* 259 * These are provided separately from set_params in order to 260 * facilitate silicon tuners which require sophisticated tuning loops, 261 * controlling each parameter separately. 262 * 263 * Don't use on newer drivers. 264 */ 265 int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); 266 int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); 267 }; 268 269 /** 270 * struct analog_demod_info - Information struct for analog TV part of the demod 271 * 272 * @name: Name of the analog TV demodulator 273 */ 274 struct analog_demod_info { 275 char *name; 276 }; 277 278 /** 279 * struct analog_demod_ops - Demodulation information and callbacks for 280 * analog TV and radio 281 * 282 * @info: pointer to struct analog_demod_info 283 * @set_params: callback function used to inform the demod to set the 284 * demodulator parameters needed to decode an analog or 285 * radio channel. The properties are passed via 286 * struct @analog_params;. 287 * @has_signal: returns 0xffff if has signal, or 0 if it doesn't. 288 * @get_afc: Used only by analog TV core. Reports the frequency 289 * drift due to AFC. 290 * @tuner_status: callback function that returns tuner status bits, e. g. 291 * TUNER_STATUS_LOCKED and TUNER_STATUS_STEREO. 292 * @standby: set the tuner to standby mode. 293 * @release: callback function called when frontend is dettached. 294 * drivers should free any allocated memory. 295 * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C 296 * mux support instead. 297 * @set_config: callback function used to send some tuner-specific 298 * parameters. 299 */ 300 struct analog_demod_ops { 301 302 struct analog_demod_info info; 303 304 void (*set_params)(struct dvb_frontend *fe, 305 struct analog_parameters *params); 306 int (*has_signal)(struct dvb_frontend *fe, u16 *signal); 307 int (*get_afc)(struct dvb_frontend *fe, s32 *afc); 308 void (*tuner_status)(struct dvb_frontend *fe); 309 void (*standby)(struct dvb_frontend *fe); 310 void (*release)(struct dvb_frontend *fe); 311 int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); 312 313 /** This is to allow setting tuner-specific configuration */ 314 int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); 315 }; 316 317 struct dtv_frontend_properties; 318 319 320 /** 321 * struct dvb_frontend_ops - Demodulation information and callbacks for 322 * ditialt TV 323 * 324 * @info: embedded struct dvb_tuner_info with tuner properties 325 * @delsys: Delivery systems supported by the frontend 326 * @release: callback function called when frontend is dettached. 327 * drivers should free any allocated memory. 328 * @release_sec: callback function requesting that the Satelite Equipment 329 * Control (SEC) driver to release and free any memory 330 * allocated by the driver. 331 * @init: callback function used to initialize the tuner device. 332 * @sleep: callback function used to put the tuner to sleep. 333 * @write: callback function used by some demod legacy drivers to 334 * allow other drivers to write data into their registers. 335 * Should not be used on new drivers. 336 * @tune: callback function used by demod drivers that use 337 * @DVBFE_ALGO_HW; to tune into a frequency. 338 * @get_frontend_algo: returns the desired hardware algorithm. 339 * @set_frontend: callback function used to inform the demod to set the 340 * parameters for demodulating a digital TV channel. 341 * The properties to be used are stored at 342 * @dvb_frontend.dtv_property_cache;. The demod can change 343 * the parameters to reflect the changes needed for the 344 * channel to be decoded, and update statistics. 345 * @get_tune_settings: callback function 346 * @get_frontend: callback function used to inform the parameters 347 * actuall in use. The properties to be used are stored at 348 * @dvb_frontend.dtv_property_cache; and update 349 * statistics. Please notice that it should not return 350 * an error code if the statistics are not available 351 * because the demog is not locked. 352 * @read_status: returns the locking status of the frontend. 353 * @read_ber: legacy callback function to return the bit error rate. 354 * Newer drivers should provide such info via DVBv5 API, 355 * e. g. @set_frontend;/@get_frontend;, implementing this 356 * callback only if DVBv3 API compatibility is wanted. 357 * @read_signal_strength: legacy callback function to return the signal 358 * strength. Newer drivers should provide such info via 359 * DVBv5 API, e. g. @set_frontend;/@get_frontend;, 360 * implementing this callback only if DVBv3 API 361 * compatibility is wanted. 362 * @read_snr: legacy callback function to return the Signal/Noise 363 * rate. Newer drivers should provide such info via 364 * DVBv5 API, e. g. @set_frontend;/@get_frontend;, 365 * implementing this callback only if DVBv3 API 366 * compatibility is wanted. 367 * @read_ucblocks: legacy callback function to return the Uncorrected Error 368 * Blocks. Newer drivers should provide such info via 369 * DVBv5 API, e. g. @set_frontend;/@get_frontend;, 370 * implementing this callback only if DVBv3 API 371 * compatibility is wanted. 372 * @diseqc_reset_overload: callback function to implement the 373 * FE_DISEQC_RESET_OVERLOAD ioctl (only Satellite) 374 * @diseqc_send_master_cmd: callback function to implement the 375 * FE_DISEQC_SEND_MASTER_CMD ioctl (only Satellite). 376 * @diseqc_recv_slave_reply: callback function to implement the 377 * FE_DISEQC_RECV_SLAVE_REPLY ioctl (only Satellite) 378 * @diseqc_send_burst: callback function to implement the 379 * FE_DISEQC_SEND_BURST ioctl (only Satellite). 380 * @set_tone: callback function to implement the 381 * FE_SET_TONE ioctl (only Satellite). 382 * @set_voltage: callback function to implement the 383 * FE_SET_VOLTAGE ioctl (only Satellite). 384 * @enable_high_lnb_voltage: callback function to implement the 385 * FE_ENABLE_HIGH_LNB_VOLTAGE ioctl (only Satellite). 386 * @dishnetwork_send_legacy_command: callback function to implement the 387 * FE_DISHNETWORK_SEND_LEGACY_CMD ioctl (only Satellite). 388 * Drivers should not use this, except when the DVB 389 * core emulation fails to provide proper support (e.g. 390 * if @set_voltage takes more than 8ms to work), and 391 * when backward compatibility with this legacy API is 392 * required. 393 * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C 394 * mux support instead. 395 * @ts_bus_ctrl: callback function used to take control of the TS bus. 396 * @set_lna: callback function to power on/off/auto the LNA. 397 * @search: callback function used on some custom algo search algos. 398 * @tuner_ops: pointer to struct dvb_tuner_ops 399 * @analog_ops: pointer to struct analog_demod_ops 400 * @set_property: callback function to allow the frontend to validade 401 * incoming properties. Should not be used on new drivers. 402 * @get_property: callback function to allow the frontend to override 403 * outcoming properties. Should not be used on new drivers. 404 */ 405 struct dvb_frontend_ops { 406 407 struct dvb_frontend_info info; 408 409 u8 delsys[MAX_DELSYS]; 410 411 void (*release)(struct dvb_frontend* fe); 412 void (*release_sec)(struct dvb_frontend* fe); 413 414 int (*init)(struct dvb_frontend* fe); 415 int (*sleep)(struct dvb_frontend* fe); 416 417 int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); 418 419 /* if this is set, it overrides the default swzigzag */ 420 int (*tune)(struct dvb_frontend* fe, 421 bool re_tune, 422 unsigned int mode_flags, 423 unsigned int *delay, 424 enum fe_status *status); 425 426 /* get frontend tuning algorithm from the module */ 427 enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); 428 429 /* these two are only used for the swzigzag code */ 430 int (*set_frontend)(struct dvb_frontend *fe); 431 int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); 432 433 int (*get_frontend)(struct dvb_frontend *fe, 434 struct dtv_frontend_properties *props); 435 436 int (*read_status)(struct dvb_frontend *fe, enum fe_status *status); 437 int (*read_ber)(struct dvb_frontend* fe, u32* ber); 438 int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); 439 int (*read_snr)(struct dvb_frontend* fe, u16* snr); 440 int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); 441 442 int (*diseqc_reset_overload)(struct dvb_frontend* fe); 443 int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); 444 int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); 445 int (*diseqc_send_burst)(struct dvb_frontend *fe, 446 enum fe_sec_mini_cmd minicmd); 447 int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone); 448 int (*set_voltage)(struct dvb_frontend *fe, 449 enum fe_sec_voltage voltage); 450 int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); 451 int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); 452 int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); 453 int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); 454 int (*set_lna)(struct dvb_frontend *); 455 456 /* 457 * These callbacks are for devices that implement their own 458 * tuning algorithms, rather than a simple swzigzag 459 */ 460 enum dvbfe_search (*search)(struct dvb_frontend *fe); 461 462 struct dvb_tuner_ops tuner_ops; 463 struct analog_demod_ops analog_ops; 464 465 int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp); 466 int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp); 467 }; 468 469 #ifdef __DVB_CORE__ 470 #define MAX_EVENT 8 471 472 /* Used only internally at dvb_frontend.c */ 473 struct dvb_fe_events { 474 struct dvb_frontend_event events[MAX_EVENT]; 475 int eventw; 476 int eventr; 477 int overflow; 478 wait_queue_head_t wait_queue; 479 struct mutex mtx; 480 }; 481 #endif 482 483 /** 484 * struct dtv_frontend_properties - contains a list of properties that are 485 * specific to a digital TV standard. 486 * 487 * @frequency: frequency in Hz for terrestrial/cable or in kHz for 488 * Satellite 489 * @modulation: Frontend modulation type 490 * @voltage: SEC voltage (only Satellite) 491 * @sectone: SEC tone mode (only Satellite) 492 * @inversion: Spectral inversion 493 * @fec_inner: Forward error correction inner Code Rate 494 * @transmission_mode: Transmission Mode 495 * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace 496 * wants to autodetect. 497 * @guard_interval: Guard Interval 498 * @hierarchy: Hierarchy 499 * @symbol_rate: Symbol Rate 500 * @code_rate_HP: high priority stream code rate 501 * @code_rate_LP: low priority stream code rate 502 * @pilot: Enable/disable/autodetect pilot tones 503 * @rolloff: Rolloff factor (alpha) 504 * @delivery_system: FE delivery system (e. g. digital TV standard) 505 * @interleaving: interleaving 506 * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard) 507 * @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard) 508 * @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard) 509 * @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard) 510 * @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard) 511 * @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard) 512 * @layer: ISDB per-layer data (only ISDB standard) 513 * @layer.segment_count: Segment Count; 514 * @layer.fec: per layer code rate; 515 * @layer.modulation: per layer modulation; 516 * @layer.interleaving: per layer interleaving. 517 * @stream_id: If different than zero, enable substream filtering, if 518 * hardware supports (DVB-S2 and DVB-T2). 519 * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) 520 * signaling data (only ATSC-M/H) 521 * @atscmh_parade_id: Parade identification number (only ATSC-M/H) 522 * @atscmh_nog: Number of MH groups per MH subframe for a designated 523 * parade (only ATSC-M/H) 524 * @atscmh_tnog: Total number of MH groups including all MH groups 525 * belonging to all MH parades in one MH subframe 526 * (only ATSC-M/H) 527 * @atscmh_sgn: Start group number (only ATSC-M/H) 528 * @atscmh_prc: Parade repetition cycle (only ATSC-M/H) 529 * @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H) 530 * @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H) 531 * @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H) 532 * @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H) 533 * @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC) 534 * Block Mode (only ATSC-M/H) 535 * @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H) 536 * @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H) 537 * @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H) 538 * @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H) 539 * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) 540 * @strength: DVBv5 API statistics: Signal Strength 541 * @cnr: DVBv5 API statistics: Signal to Noise ratio of the 542 * (main) carrier 543 * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count 544 * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count 545 * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count 546 * @post_bit_count: DVBv5 API statistics: post-Viterbi bit count 547 * @block_error: DVBv5 API statistics: block error count 548 * @block_count: DVBv5 API statistics: block count 549 * 550 * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are 551 * calculated on userspace. 552 * 553 * Only a subset of the properties are needed for a given delivery system. 554 * For more info, consult the media_api.html with the documentation of the 555 * Userspace API. 556 */ 557 struct dtv_frontend_properties { 558 u32 frequency; 559 enum fe_modulation modulation; 560 561 enum fe_sec_voltage voltage; 562 enum fe_sec_tone_mode sectone; 563 enum fe_spectral_inversion inversion; 564 enum fe_code_rate fec_inner; 565 enum fe_transmit_mode transmission_mode; 566 u32 bandwidth_hz; /* 0 = AUTO */ 567 enum fe_guard_interval guard_interval; 568 enum fe_hierarchy hierarchy; 569 u32 symbol_rate; 570 enum fe_code_rate code_rate_HP; 571 enum fe_code_rate code_rate_LP; 572 573 enum fe_pilot pilot; 574 enum fe_rolloff rolloff; 575 576 enum fe_delivery_system delivery_system; 577 578 enum fe_interleaving interleaving; 579 580 /* ISDB-T specifics */ 581 u8 isdbt_partial_reception; 582 u8 isdbt_sb_mode; 583 u8 isdbt_sb_subchannel; 584 u32 isdbt_sb_segment_idx; 585 u32 isdbt_sb_segment_count; 586 u8 isdbt_layer_enabled; 587 struct { 588 u8 segment_count; 589 enum fe_code_rate fec; 590 enum fe_modulation modulation; 591 u8 interleaving; 592 } layer[3]; 593 594 /* Multistream specifics */ 595 u32 stream_id; 596 597 /* ATSC-MH specifics */ 598 u8 atscmh_fic_ver; 599 u8 atscmh_parade_id; 600 u8 atscmh_nog; 601 u8 atscmh_tnog; 602 u8 atscmh_sgn; 603 u8 atscmh_prc; 604 605 u8 atscmh_rs_frame_mode; 606 u8 atscmh_rs_frame_ensemble; 607 u8 atscmh_rs_code_mode_pri; 608 u8 atscmh_rs_code_mode_sec; 609 u8 atscmh_sccc_block_mode; 610 u8 atscmh_sccc_code_mode_a; 611 u8 atscmh_sccc_code_mode_b; 612 u8 atscmh_sccc_code_mode_c; 613 u8 atscmh_sccc_code_mode_d; 614 615 u32 lna; 616 617 /* statistics data */ 618 struct dtv_fe_stats strength; 619 struct dtv_fe_stats cnr; 620 struct dtv_fe_stats pre_bit_error; 621 struct dtv_fe_stats pre_bit_count; 622 struct dtv_fe_stats post_bit_error; 623 struct dtv_fe_stats post_bit_count; 624 struct dtv_fe_stats block_error; 625 struct dtv_fe_stats block_count; 626 627 /* private: */ 628 /* Cache State */ 629 u32 state; 630 631 }; 632 633 #define DVB_FE_NO_EXIT 0 634 #define DVB_FE_NORMAL_EXIT 1 635 #define DVB_FE_DEVICE_REMOVED 2 636 #define DVB_FE_DEVICE_RESUME 3 637 638 /** 639 * struct dvb_frontend - Frontend structure to be used on drivers. 640 * 641 * @ops: embedded struct dvb_frontend_ops 642 * @dvb: pointer to struct dvb_adapter 643 * @demodulator_priv: demod private data 644 * @tuner_priv: tuner private data 645 * @frontend_priv: frontend private data 646 * @sec_priv: SEC private data 647 * @analog_demod_priv: Analog demod private data 648 * @dtv_property_cache: embedded struct dtv_frontend_properties 649 * @callback: callback function used on some drivers to call 650 * either the tuner or the demodulator. 651 * @id: Frontend ID 652 * @exit: Used to inform the DVB core that the frontend 653 * thread should exit (usually, means that the hardware 654 * got disconnected. 655 */ 656 657 struct dvb_frontend { 658 struct dvb_frontend_ops ops; 659 struct dvb_adapter *dvb; 660 void *demodulator_priv; 661 void *tuner_priv; 662 void *frontend_priv; 663 void *sec_priv; 664 void *analog_demod_priv; 665 struct dtv_frontend_properties dtv_property_cache; 666 #define DVB_FRONTEND_COMPONENT_TUNER 0 667 #define DVB_FRONTEND_COMPONENT_DEMOD 1 668 int (*callback)(void *adapter_priv, int component, int cmd, int arg); 669 int id; 670 unsigned int exit; 671 }; 672 673 /** 674 * dvb_register_frontend() - Registers a DVB frontend at the adapter 675 * 676 * @dvb: pointer to the dvb adapter 677 * @fe: pointer to the frontend struct 678 * 679 * Allocate and initialize the private data needed by the frontend core to 680 * manage the frontend and calls dvb_register_device() to register a new 681 * frontend. It also cleans the property cache that stores the frontend 682 * parameters and selects the first available delivery system. 683 */ 684 int dvb_register_frontend(struct dvb_adapter *dvb, 685 struct dvb_frontend *fe); 686 687 /** 688 * dvb_unregister_frontend() - Unregisters a DVB frontend 689 * 690 * @fe: pointer to the frontend struct 691 * 692 * Stops the frontend kthread, calls dvb_unregister_device() and frees the 693 * private frontend data allocated by dvb_register_frontend(). 694 * 695 * NOTE: This function doesn't frees the memory allocated by the demod, 696 * by the SEC driver and by the tuner. In order to free it, an explicit call to 697 * dvb_frontend_detach() is needed, after calling this function. 698 */ 699 int dvb_unregister_frontend(struct dvb_frontend *fe); 700 701 /** 702 * dvb_frontend_detach() - Detaches and frees frontend specific data 703 * 704 * @fe: pointer to the frontend struct 705 * 706 * This function should be called after dvb_unregister_frontend(). It 707 * calls the SEC, tuner and demod release functions: 708 * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release, 709 * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release. 710 * 711 * If the driver is compiled with CONFIG_MEDIA_ATTACH, it also decreases 712 * the module reference count, needed to allow userspace to remove the 713 * previously used DVB frontend modules. 714 */ 715 void dvb_frontend_detach(struct dvb_frontend *fe); 716 717 /** 718 * dvb_frontend_suspend() - Suspends a Digital TV frontend 719 * 720 * @fe: pointer to the frontend struct 721 * 722 * This function prepares a Digital TV frontend to suspend. 723 * 724 * In order to prepare the tuner to suspend, if 725 * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise, 726 * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available. 727 * 728 * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend. 729 * 730 * The drivers should also call dvb_frontend_suspend\(\) as part of their 731 * handler for the &device_driver.suspend\(\). 732 */ 733 int dvb_frontend_suspend(struct dvb_frontend *fe); 734 735 /** 736 * dvb_frontend_resume() - Resumes a Digital TV frontend 737 * 738 * @fe: pointer to the frontend struct 739 * 740 * This function resumes the usual operation of the tuner after resume. 741 * 742 * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\). 743 * 744 * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it. 745 * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available. 746 * 747 * Once tuner and demods are resumed, it will enforce that the SEC voltage and 748 * tone are restored to their previous values and wake up the frontend's 749 * kthread in order to retune the frontend. 750 * 751 * The drivers should also call dvb_frontend_resume() as part of their 752 * handler for the &device_driver.resume\(\). 753 */ 754 int dvb_frontend_resume(struct dvb_frontend *fe); 755 756 /** 757 * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend 758 * 759 * @fe: pointer to the frontend struct 760 * 761 * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\), 762 * and resets SEC tone and voltage (for Satellite systems). 763 * 764 * NOTE: Currently, this function is used only by one driver (budget-av). 765 * It seems to be due to address some special issue with that specific 766 * frontend. 767 */ 768 void dvb_frontend_reinitialise(struct dvb_frontend *fe); 769 770 /** 771 * dvb_frontend_sleep_until() - Sleep for the amount of time given by 772 * add_usec parameter 773 * 774 * @waketime: pointer to a struct ktime_t 775 * @add_usec: time to sleep, in microseconds 776 * 777 * This function is used to measure the time required for the 778 * %FE_DISHNETWORK_SEND_LEGACY_CMD ioctl to work. It needs to be as precise 779 * as possible, as it affects the detection of the dish tone command at the 780 * satellite subsystem. 781 * 782 * Its used internally by the DVB frontend core, in order to emulate 783 * %FE_DISHNETWORK_SEND_LEGACY_CMD using the &dvb_frontend_ops.set_voltage\(\) 784 * callback. 785 * 786 * NOTE: it should not be used at the drivers, as the emulation for the 787 * legacy callback is provided by the Kernel. The only situation where this 788 * should be at the drivers is when there are some bugs at the hardware that 789 * would prevent the core emulation to work. On such cases, the driver would 790 * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and 791 * calling this function directly. 792 */ 793 void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec); 794 795 #endif 796