1 /*
2 * Copyright © 2006 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
20 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
21 * SOFTWARE.
22 *
23 * Authors:
24 * Eric Anholt <eric@anholt.net>
25 *
26 */
27
28 #include <drm/drm_dp_helper.h>
29 #include <drm/drmP.h>
30 #include <drm/i915_drm.h>
31 #include "i915_drv.h"
32
33 #define _INTEL_BIOS_PRIVATE
34 #include "intel_vbt_defs.h"
35
36 /**
37 * DOC: Video BIOS Table (VBT)
38 *
39 * The Video BIOS Table, or VBT, provides platform and board specific
40 * configuration information to the driver that is not discoverable or available
41 * through other means. The configuration is mostly related to display
42 * hardware. The VBT is available via the ACPI OpRegion or, on older systems, in
43 * the PCI ROM.
44 *
45 * The VBT consists of a VBT Header (defined as &struct vbt_header), a BDB
46 * Header (&struct bdb_header), and a number of BIOS Data Blocks (BDB) that
47 * contain the actual configuration information. The VBT Header, and thus the
48 * VBT, begins with "$VBT" signature. The VBT Header contains the offset of the
49 * BDB Header. The data blocks are concatenated after the BDB Header. The data
50 * blocks have a 1-byte Block ID, 2-byte Block Size, and Block Size bytes of
51 * data. (Block 53, the MIPI Sequence Block is an exception.)
52 *
53 * The driver parses the VBT during load. The relevant information is stored in
54 * driver private data for ease of use, and the actual VBT is not read after
55 * that.
56 */
57
58 #define SLAVE_ADDR1 0x70
59 #define SLAVE_ADDR2 0x72
60
61 /* Get BDB block size given a pointer to Block ID. */
_get_blocksize(const u8 * block_base)62 static u32 _get_blocksize(const u8 *block_base)
63 {
64 /* The MIPI Sequence Block v3+ has a separate size field. */
65 if (*block_base == BDB_MIPI_SEQUENCE && *(block_base + 3) >= 3)
66 return *((const u32 *)(block_base + 4));
67 else
68 return *((const u16 *)(block_base + 1));
69 }
70
71 /* Get BDB block size give a pointer to data after Block ID and Block Size. */
get_blocksize(const void * block_data)72 static u32 get_blocksize(const void *block_data)
73 {
74 return _get_blocksize(block_data - 3);
75 }
76
77 static const void *
find_section(const void * _bdb,int section_id)78 find_section(const void *_bdb, int section_id)
79 {
80 const struct bdb_header *bdb = _bdb;
81 const u8 *base = _bdb;
82 int index = 0;
83 u32 total, current_size;
84 u8 current_id;
85
86 /* skip to first section */
87 index += bdb->header_size;
88 total = bdb->bdb_size;
89
90 /* walk the sections looking for section_id */
91 while (index + 3 < total) {
92 current_id = *(base + index);
93 current_size = _get_blocksize(base + index);
94 index += 3;
95
96 if (index + current_size > total)
97 return NULL;
98
99 if (current_id == section_id)
100 return base + index;
101
102 index += current_size;
103 }
104
105 return NULL;
106 }
107
108 static void
fill_detail_timing_data(struct drm_display_mode * panel_fixed_mode,const struct lvds_dvo_timing * dvo_timing)109 fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
110 const struct lvds_dvo_timing *dvo_timing)
111 {
112 panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
113 dvo_timing->hactive_lo;
114 panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
115 ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
116 panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
117 dvo_timing->hsync_pulse_width;
118 panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
119 ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
120
121 panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
122 dvo_timing->vactive_lo;
123 panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
124 dvo_timing->vsync_off;
125 panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
126 dvo_timing->vsync_pulse_width;
127 panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
128 ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
129 panel_fixed_mode->clock = dvo_timing->clock * 10;
130 panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
131
132 if (dvo_timing->hsync_positive)
133 panel_fixed_mode->flags |= DRM_MODE_FLAG_PHSYNC;
134 else
135 panel_fixed_mode->flags |= DRM_MODE_FLAG_NHSYNC;
136
137 if (dvo_timing->vsync_positive)
138 panel_fixed_mode->flags |= DRM_MODE_FLAG_PVSYNC;
139 else
140 panel_fixed_mode->flags |= DRM_MODE_FLAG_NVSYNC;
141
142 panel_fixed_mode->width_mm = (dvo_timing->himage_hi << 8) |
143 dvo_timing->himage_lo;
144 panel_fixed_mode->height_mm = (dvo_timing->vimage_hi << 8) |
145 dvo_timing->vimage_lo;
146
147 /* Some VBTs have bogus h/vtotal values */
148 if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
149 panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
150 if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
151 panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
152
153 drm_mode_set_name(panel_fixed_mode);
154 }
155
156 static const struct lvds_dvo_timing *
get_lvds_dvo_timing(const struct bdb_lvds_lfp_data * lvds_lfp_data,const struct bdb_lvds_lfp_data_ptrs * lvds_lfp_data_ptrs,int index)157 get_lvds_dvo_timing(const struct bdb_lvds_lfp_data *lvds_lfp_data,
158 const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs,
159 int index)
160 {
161 /*
162 * the size of fp_timing varies on the different platform.
163 * So calculate the DVO timing relative offset in LVDS data
164 * entry to get the DVO timing entry
165 */
166
167 int lfp_data_size =
168 lvds_lfp_data_ptrs->ptr[1].dvo_timing_offset -
169 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset;
170 int dvo_timing_offset =
171 lvds_lfp_data_ptrs->ptr[0].dvo_timing_offset -
172 lvds_lfp_data_ptrs->ptr[0].fp_timing_offset;
173 char *entry = (char *)lvds_lfp_data->data + lfp_data_size * index;
174
175 return (struct lvds_dvo_timing *)(entry + dvo_timing_offset);
176 }
177
178 /* get lvds_fp_timing entry
179 * this function may return NULL if the corresponding entry is invalid
180 */
181 static const struct lvds_fp_timing *
get_lvds_fp_timing(const struct bdb_header * bdb,const struct bdb_lvds_lfp_data * data,const struct bdb_lvds_lfp_data_ptrs * ptrs,int index)182 get_lvds_fp_timing(const struct bdb_header *bdb,
183 const struct bdb_lvds_lfp_data *data,
184 const struct bdb_lvds_lfp_data_ptrs *ptrs,
185 int index)
186 {
187 size_t data_ofs = (const u8 *)data - (const u8 *)bdb;
188 u16 data_size = ((const u16 *)data)[-1]; /* stored in header */
189 size_t ofs;
190
191 if (index >= ARRAY_SIZE(ptrs->ptr))
192 return NULL;
193 ofs = ptrs->ptr[index].fp_timing_offset;
194 if (ofs < data_ofs ||
195 ofs + sizeof(struct lvds_fp_timing) > data_ofs + data_size)
196 return NULL;
197 return (const struct lvds_fp_timing *)((const u8 *)bdb + ofs);
198 }
199
200 /* Try to find integrated panel data */
201 static void
parse_lfp_panel_data(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)202 parse_lfp_panel_data(struct drm_i915_private *dev_priv,
203 const struct bdb_header *bdb)
204 {
205 const struct bdb_lvds_options *lvds_options;
206 const struct bdb_lvds_lfp_data *lvds_lfp_data;
207 const struct bdb_lvds_lfp_data_ptrs *lvds_lfp_data_ptrs;
208 const struct lvds_dvo_timing *panel_dvo_timing;
209 const struct lvds_fp_timing *fp_timing;
210 struct drm_display_mode *panel_fixed_mode;
211 int panel_type;
212 int drrs_mode;
213 int ret;
214
215 lvds_options = find_section(bdb, BDB_LVDS_OPTIONS);
216 if (!lvds_options)
217 return;
218
219 dev_priv->vbt.lvds_dither = lvds_options->pixel_dither;
220
221 ret = intel_opregion_get_panel_type(dev_priv);
222 if (ret >= 0) {
223 WARN_ON(ret > 0xf);
224 panel_type = ret;
225 DRM_DEBUG_KMS("Panel type: %d (OpRegion)\n", panel_type);
226 } else {
227 if (lvds_options->panel_type > 0xf) {
228 DRM_DEBUG_KMS("Invalid VBT panel type 0x%x\n",
229 lvds_options->panel_type);
230 return;
231 }
232 panel_type = lvds_options->panel_type;
233 DRM_DEBUG_KMS("Panel type: %d (VBT)\n", panel_type);
234 }
235
236 dev_priv->vbt.panel_type = panel_type;
237
238 drrs_mode = (lvds_options->dps_panel_type_bits
239 >> (panel_type * 2)) & MODE_MASK;
240 /*
241 * VBT has static DRRS = 0 and seamless DRRS = 2.
242 * The below piece of code is required to adjust vbt.drrs_type
243 * to match the enum drrs_support_type.
244 */
245 switch (drrs_mode) {
246 case 0:
247 dev_priv->vbt.drrs_type = STATIC_DRRS_SUPPORT;
248 DRM_DEBUG_KMS("DRRS supported mode is static\n");
249 break;
250 case 2:
251 dev_priv->vbt.drrs_type = SEAMLESS_DRRS_SUPPORT;
252 DRM_DEBUG_KMS("DRRS supported mode is seamless\n");
253 break;
254 default:
255 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
256 DRM_DEBUG_KMS("DRRS not supported (VBT input)\n");
257 break;
258 }
259
260 lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA);
261 if (!lvds_lfp_data)
262 return;
263
264 lvds_lfp_data_ptrs = find_section(bdb, BDB_LVDS_LFP_DATA_PTRS);
265 if (!lvds_lfp_data_ptrs)
266 return;
267
268 dev_priv->vbt.lvds_vbt = 1;
269
270 panel_dvo_timing = get_lvds_dvo_timing(lvds_lfp_data,
271 lvds_lfp_data_ptrs,
272 panel_type);
273
274 panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
275 if (!panel_fixed_mode)
276 return;
277
278 fill_detail_timing_data(panel_fixed_mode, panel_dvo_timing);
279
280 dev_priv->vbt.lfp_lvds_vbt_mode = panel_fixed_mode;
281
282 DRM_DEBUG_KMS("Found panel mode in BIOS VBT tables:\n");
283 drm_mode_debug_printmodeline(panel_fixed_mode);
284
285 fp_timing = get_lvds_fp_timing(bdb, lvds_lfp_data,
286 lvds_lfp_data_ptrs,
287 panel_type);
288 if (fp_timing) {
289 /* check the resolution, just to be sure */
290 if (fp_timing->x_res == panel_fixed_mode->hdisplay &&
291 fp_timing->y_res == panel_fixed_mode->vdisplay) {
292 dev_priv->vbt.bios_lvds_val = fp_timing->lvds_reg_val;
293 DRM_DEBUG_KMS("VBT initial LVDS value %x\n",
294 dev_priv->vbt.bios_lvds_val);
295 }
296 }
297 }
298
299 static void
parse_lfp_backlight(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)300 parse_lfp_backlight(struct drm_i915_private *dev_priv,
301 const struct bdb_header *bdb)
302 {
303 const struct bdb_lfp_backlight_data *backlight_data;
304 const struct bdb_lfp_backlight_data_entry *entry;
305 int panel_type = dev_priv->vbt.panel_type;
306
307 backlight_data = find_section(bdb, BDB_LVDS_BACKLIGHT);
308 if (!backlight_data)
309 return;
310
311 if (backlight_data->entry_size != sizeof(backlight_data->data[0])) {
312 DRM_DEBUG_KMS("Unsupported backlight data entry size %u\n",
313 backlight_data->entry_size);
314 return;
315 }
316
317 entry = &backlight_data->data[panel_type];
318
319 dev_priv->vbt.backlight.present = entry->type == BDB_BACKLIGHT_TYPE_PWM;
320 if (!dev_priv->vbt.backlight.present) {
321 DRM_DEBUG_KMS("PWM backlight not present in VBT (type %u)\n",
322 entry->type);
323 return;
324 }
325
326 dev_priv->vbt.backlight.type = INTEL_BACKLIGHT_DISPLAY_DDI;
327 if (bdb->version >= 191 &&
328 get_blocksize(backlight_data) >= sizeof(*backlight_data)) {
329 const struct bdb_lfp_backlight_control_method *method;
330
331 method = &backlight_data->backlight_control[panel_type];
332 dev_priv->vbt.backlight.type = method->type;
333 }
334
335 dev_priv->vbt.backlight.pwm_freq_hz = entry->pwm_freq_hz;
336 dev_priv->vbt.backlight.active_low_pwm = entry->active_low_pwm;
337 dev_priv->vbt.backlight.min_brightness = entry->min_brightness;
338 DRM_DEBUG_KMS("VBT backlight PWM modulation frequency %u Hz, "
339 "active %s, min brightness %u, level %u\n",
340 dev_priv->vbt.backlight.pwm_freq_hz,
341 dev_priv->vbt.backlight.active_low_pwm ? "low" : "high",
342 dev_priv->vbt.backlight.min_brightness,
343 backlight_data->level[panel_type]);
344 }
345
346 /* Try to find sdvo panel data */
347 static void
parse_sdvo_panel_data(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)348 parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
349 const struct bdb_header *bdb)
350 {
351 const struct lvds_dvo_timing *dvo_timing;
352 struct drm_display_mode *panel_fixed_mode;
353 int index;
354
355 index = i915.vbt_sdvo_panel_type;
356 if (index == -2) {
357 DRM_DEBUG_KMS("Ignore SDVO panel mode from BIOS VBT tables.\n");
358 return;
359 }
360
361 if (index == -1) {
362 const struct bdb_sdvo_lvds_options *sdvo_lvds_options;
363
364 sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
365 if (!sdvo_lvds_options)
366 return;
367
368 index = sdvo_lvds_options->panel_type;
369 }
370
371 dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
372 if (!dvo_timing)
373 return;
374
375 panel_fixed_mode = kzalloc(sizeof(*panel_fixed_mode), GFP_KERNEL);
376 if (!panel_fixed_mode)
377 return;
378
379 fill_detail_timing_data(panel_fixed_mode, dvo_timing + index);
380
381 dev_priv->vbt.sdvo_lvds_vbt_mode = panel_fixed_mode;
382
383 DRM_DEBUG_KMS("Found SDVO panel mode in BIOS VBT tables:\n");
384 drm_mode_debug_printmodeline(panel_fixed_mode);
385 }
386
intel_bios_ssc_frequency(struct drm_i915_private * dev_priv,bool alternate)387 static int intel_bios_ssc_frequency(struct drm_i915_private *dev_priv,
388 bool alternate)
389 {
390 switch (INTEL_INFO(dev_priv)->gen) {
391 case 2:
392 return alternate ? 66667 : 48000;
393 case 3:
394 case 4:
395 return alternate ? 100000 : 96000;
396 default:
397 return alternate ? 100000 : 120000;
398 }
399 }
400
401 static void
parse_general_features(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)402 parse_general_features(struct drm_i915_private *dev_priv,
403 const struct bdb_header *bdb)
404 {
405 const struct bdb_general_features *general;
406
407 general = find_section(bdb, BDB_GENERAL_FEATURES);
408 if (!general)
409 return;
410
411 dev_priv->vbt.int_tv_support = general->int_tv_support;
412 /* int_crt_support can't be trusted on earlier platforms */
413 if (bdb->version >= 155 &&
414 (HAS_DDI(dev_priv) || IS_VALLEYVIEW(dev_priv)))
415 dev_priv->vbt.int_crt_support = general->int_crt_support;
416 dev_priv->vbt.lvds_use_ssc = general->enable_ssc;
417 dev_priv->vbt.lvds_ssc_freq =
418 intel_bios_ssc_frequency(dev_priv, general->ssc_freq);
419 dev_priv->vbt.display_clock_mode = general->display_clock_mode;
420 dev_priv->vbt.fdi_rx_polarity_inverted = general->fdi_rx_polarity_inverted;
421 DRM_DEBUG_KMS("BDB_GENERAL_FEATURES int_tv_support %d int_crt_support %d lvds_use_ssc %d lvds_ssc_freq %d display_clock_mode %d fdi_rx_polarity_inverted %d\n",
422 dev_priv->vbt.int_tv_support,
423 dev_priv->vbt.int_crt_support,
424 dev_priv->vbt.lvds_use_ssc,
425 dev_priv->vbt.lvds_ssc_freq,
426 dev_priv->vbt.display_clock_mode,
427 dev_priv->vbt.fdi_rx_polarity_inverted);
428 }
429
430 static void
parse_general_definitions(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)431 parse_general_definitions(struct drm_i915_private *dev_priv,
432 const struct bdb_header *bdb)
433 {
434 const struct bdb_general_definitions *general;
435
436 general = find_section(bdb, BDB_GENERAL_DEFINITIONS);
437 if (general) {
438 u16 block_size = get_blocksize(general);
439 if (block_size >= sizeof(*general)) {
440 int bus_pin = general->crt_ddc_gmbus_pin;
441 DRM_DEBUG_KMS("crt_ddc_bus_pin: %d\n", bus_pin);
442 if (intel_gmbus_is_valid_pin(dev_priv, bus_pin))
443 dev_priv->vbt.crt_ddc_pin = bus_pin;
444 } else {
445 DRM_DEBUG_KMS("BDB_GD too small (%d). Invalid.\n",
446 block_size);
447 }
448 }
449 }
450
451 static const union child_device_config *
child_device_ptr(const struct bdb_general_definitions * p_defs,int i)452 child_device_ptr(const struct bdb_general_definitions *p_defs, int i)
453 {
454 return (const void *) &p_defs->devices[i * p_defs->child_dev_size];
455 }
456
457 static void
parse_sdvo_device_mapping(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)458 parse_sdvo_device_mapping(struct drm_i915_private *dev_priv,
459 const struct bdb_header *bdb)
460 {
461 struct sdvo_device_mapping *p_mapping;
462 const struct bdb_general_definitions *p_defs;
463 const struct old_child_dev_config *child; /* legacy */
464 int i, child_device_num, count;
465 u16 block_size;
466
467 p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
468 if (!p_defs) {
469 DRM_DEBUG_KMS("No general definition block is found, unable to construct sdvo mapping.\n");
470 return;
471 }
472
473 /*
474 * Only parse SDVO mappings when the general definitions block child
475 * device size matches that of the *legacy* child device config
476 * struct. Thus, SDVO mapping will be skipped for newer VBT.
477 */
478 if (p_defs->child_dev_size != sizeof(*child)) {
479 DRM_DEBUG_KMS("Unsupported child device size for SDVO mapping.\n");
480 return;
481 }
482 /* get the block size of general definitions */
483 block_size = get_blocksize(p_defs);
484 /* get the number of child device */
485 child_device_num = (block_size - sizeof(*p_defs)) /
486 p_defs->child_dev_size;
487 count = 0;
488 for (i = 0; i < child_device_num; i++) {
489 child = &child_device_ptr(p_defs, i)->old;
490 if (!child->device_type) {
491 /* skip the device block if device type is invalid */
492 continue;
493 }
494 if (child->slave_addr != SLAVE_ADDR1 &&
495 child->slave_addr != SLAVE_ADDR2) {
496 /*
497 * If the slave address is neither 0x70 nor 0x72,
498 * it is not a SDVO device. Skip it.
499 */
500 continue;
501 }
502 if (child->dvo_port != DEVICE_PORT_DVOB &&
503 child->dvo_port != DEVICE_PORT_DVOC) {
504 /* skip the incorrect SDVO port */
505 DRM_DEBUG_KMS("Incorrect SDVO port. Skip it\n");
506 continue;
507 }
508 DRM_DEBUG_KMS("the SDVO device with slave addr %2x is found on"
509 " %s port\n",
510 child->slave_addr,
511 (child->dvo_port == DEVICE_PORT_DVOB) ?
512 "SDVOB" : "SDVOC");
513 p_mapping = &dev_priv->vbt.sdvo_mappings[child->dvo_port - 1];
514 if (!p_mapping->initialized) {
515 p_mapping->dvo_port = child->dvo_port;
516 p_mapping->slave_addr = child->slave_addr;
517 p_mapping->dvo_wiring = child->dvo_wiring;
518 p_mapping->ddc_pin = child->ddc_pin;
519 p_mapping->i2c_pin = child->i2c_pin;
520 p_mapping->initialized = 1;
521 DRM_DEBUG_KMS("SDVO device: dvo=%x, addr=%x, wiring=%d, ddc_pin=%d, i2c_pin=%d\n",
522 p_mapping->dvo_port,
523 p_mapping->slave_addr,
524 p_mapping->dvo_wiring,
525 p_mapping->ddc_pin,
526 p_mapping->i2c_pin);
527 } else {
528 DRM_DEBUG_KMS("Maybe one SDVO port is shared by "
529 "two SDVO device.\n");
530 }
531 if (child->slave2_addr) {
532 /* Maybe this is a SDVO device with multiple inputs */
533 /* And the mapping info is not added */
534 DRM_DEBUG_KMS("there exists the slave2_addr. Maybe this"
535 " is a SDVO device with multiple inputs.\n");
536 }
537 count++;
538 }
539
540 if (!count) {
541 /* No SDVO device info is found */
542 DRM_DEBUG_KMS("No SDVO device info is found in VBT\n");
543 }
544 return;
545 }
546
547 static void
parse_driver_features(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)548 parse_driver_features(struct drm_i915_private *dev_priv,
549 const struct bdb_header *bdb)
550 {
551 const struct bdb_driver_features *driver;
552
553 driver = find_section(bdb, BDB_DRIVER_FEATURES);
554 if (!driver)
555 return;
556
557 if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
558 dev_priv->vbt.edp.support = 1;
559
560 DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled);
561 /*
562 * If DRRS is not supported, drrs_type has to be set to 0.
563 * This is because, VBT is configured in such a way that
564 * static DRRS is 0 and DRRS not supported is represented by
565 * driver->drrs_enabled=false
566 */
567 if (!driver->drrs_enabled)
568 dev_priv->vbt.drrs_type = DRRS_NOT_SUPPORTED;
569 }
570
571 static void
parse_edp(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)572 parse_edp(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
573 {
574 const struct bdb_edp *edp;
575 const struct edp_power_seq *edp_pps;
576 const struct edp_link_params *edp_link_params;
577 int panel_type = dev_priv->vbt.panel_type;
578
579 edp = find_section(bdb, BDB_EDP);
580 if (!edp) {
581 if (dev_priv->vbt.edp.support)
582 DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n");
583 return;
584 }
585
586 switch ((edp->color_depth >> (panel_type * 2)) & 3) {
587 case EDP_18BPP:
588 dev_priv->vbt.edp.bpp = 18;
589 break;
590 case EDP_24BPP:
591 dev_priv->vbt.edp.bpp = 24;
592 break;
593 case EDP_30BPP:
594 dev_priv->vbt.edp.bpp = 30;
595 break;
596 }
597
598 /* Get the eDP sequencing and link info */
599 edp_pps = &edp->power_seqs[panel_type];
600 edp_link_params = &edp->link_params[panel_type];
601
602 dev_priv->vbt.edp.pps = *edp_pps;
603
604 switch (edp_link_params->rate) {
605 case EDP_RATE_1_62:
606 dev_priv->vbt.edp.rate = DP_LINK_BW_1_62;
607 break;
608 case EDP_RATE_2_7:
609 dev_priv->vbt.edp.rate = DP_LINK_BW_2_7;
610 break;
611 default:
612 DRM_DEBUG_KMS("VBT has unknown eDP link rate value %u\n",
613 edp_link_params->rate);
614 break;
615 }
616
617 switch (edp_link_params->lanes) {
618 case EDP_LANE_1:
619 dev_priv->vbt.edp.lanes = 1;
620 break;
621 case EDP_LANE_2:
622 dev_priv->vbt.edp.lanes = 2;
623 break;
624 case EDP_LANE_4:
625 dev_priv->vbt.edp.lanes = 4;
626 break;
627 default:
628 DRM_DEBUG_KMS("VBT has unknown eDP lane count value %u\n",
629 edp_link_params->lanes);
630 break;
631 }
632
633 switch (edp_link_params->preemphasis) {
634 case EDP_PREEMPHASIS_NONE:
635 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
636 break;
637 case EDP_PREEMPHASIS_3_5dB:
638 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
639 break;
640 case EDP_PREEMPHASIS_6dB:
641 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
642 break;
643 case EDP_PREEMPHASIS_9_5dB:
644 dev_priv->vbt.edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
645 break;
646 default:
647 DRM_DEBUG_KMS("VBT has unknown eDP pre-emphasis value %u\n",
648 edp_link_params->preemphasis);
649 break;
650 }
651
652 switch (edp_link_params->vswing) {
653 case EDP_VSWING_0_4V:
654 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
655 break;
656 case EDP_VSWING_0_6V:
657 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
658 break;
659 case EDP_VSWING_0_8V:
660 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
661 break;
662 case EDP_VSWING_1_2V:
663 dev_priv->vbt.edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
664 break;
665 default:
666 DRM_DEBUG_KMS("VBT has unknown eDP voltage swing value %u\n",
667 edp_link_params->vswing);
668 break;
669 }
670
671 if (bdb->version >= 173) {
672 uint8_t vswing;
673
674 /* Don't read from VBT if module parameter has valid value*/
675 if (i915.edp_vswing) {
676 dev_priv->vbt.edp.low_vswing = i915.edp_vswing == 1;
677 } else {
678 vswing = (edp->edp_vswing_preemph >> (panel_type * 4)) & 0xF;
679 dev_priv->vbt.edp.low_vswing = vswing == 0;
680 }
681 }
682 }
683
684 static void
parse_psr(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)685 parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)
686 {
687 const struct bdb_psr *psr;
688 const struct psr_table *psr_table;
689 int panel_type = dev_priv->vbt.panel_type;
690
691 psr = find_section(bdb, BDB_PSR);
692 if (!psr) {
693 DRM_DEBUG_KMS("No PSR BDB found.\n");
694 return;
695 }
696
697 psr_table = &psr->psr_table[panel_type];
698
699 dev_priv->vbt.psr.full_link = psr_table->full_link;
700 dev_priv->vbt.psr.require_aux_wakeup = psr_table->require_aux_to_wakeup;
701
702 /* Allowed VBT values goes from 0 to 15 */
703 dev_priv->vbt.psr.idle_frames = psr_table->idle_frames < 0 ? 0 :
704 psr_table->idle_frames > 15 ? 15 : psr_table->idle_frames;
705
706 switch (psr_table->lines_to_wait) {
707 case 0:
708 dev_priv->vbt.psr.lines_to_wait = PSR_0_LINES_TO_WAIT;
709 break;
710 case 1:
711 dev_priv->vbt.psr.lines_to_wait = PSR_1_LINE_TO_WAIT;
712 break;
713 case 2:
714 dev_priv->vbt.psr.lines_to_wait = PSR_4_LINES_TO_WAIT;
715 break;
716 case 3:
717 dev_priv->vbt.psr.lines_to_wait = PSR_8_LINES_TO_WAIT;
718 break;
719 default:
720 DRM_DEBUG_KMS("VBT has unknown PSR lines to wait %u\n",
721 psr_table->lines_to_wait);
722 break;
723 }
724
725 dev_priv->vbt.psr.tp1_wakeup_time = psr_table->tp1_wakeup_time;
726 dev_priv->vbt.psr.tp2_tp3_wakeup_time = psr_table->tp2_tp3_wakeup_time;
727 }
728
729 static void
parse_mipi_config(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)730 parse_mipi_config(struct drm_i915_private *dev_priv,
731 const struct bdb_header *bdb)
732 {
733 const struct bdb_mipi_config *start;
734 const struct mipi_config *config;
735 const struct mipi_pps_data *pps;
736 int panel_type = dev_priv->vbt.panel_type;
737
738 /* parse MIPI blocks only if LFP type is MIPI */
739 if (!intel_bios_is_dsi_present(dev_priv, NULL))
740 return;
741
742 /* Initialize this to undefined indicating no generic MIPI support */
743 dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
744
745 /* Block #40 is already parsed and panel_fixed_mode is
746 * stored in dev_priv->lfp_lvds_vbt_mode
747 * resuse this when needed
748 */
749
750 /* Parse #52 for panel index used from panel_type already
751 * parsed
752 */
753 start = find_section(bdb, BDB_MIPI_CONFIG);
754 if (!start) {
755 DRM_DEBUG_KMS("No MIPI config BDB found");
756 return;
757 }
758
759 DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n",
760 panel_type);
761
762 /*
763 * get hold of the correct configuration block and pps data as per
764 * the panel_type as index
765 */
766 config = &start->config[panel_type];
767 pps = &start->pps[panel_type];
768
769 /* store as of now full data. Trim when we realise all is not needed */
770 dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config), GFP_KERNEL);
771 if (!dev_priv->vbt.dsi.config)
772 return;
773
774 dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data), GFP_KERNEL);
775 if (!dev_priv->vbt.dsi.pps) {
776 kfree(dev_priv->vbt.dsi.config);
777 return;
778 }
779
780 /*
781 * These fields are introduced from the VBT version 197 onwards,
782 * so making sure that these bits are set zero in the previous
783 * versions.
784 */
785 if (dev_priv->vbt.dsi.config->dual_link && bdb->version < 197) {
786 dev_priv->vbt.dsi.config->dl_dcs_cabc_ports = 0;
787 dev_priv->vbt.dsi.config->dl_dcs_backlight_ports = 0;
788 }
789
790 /* We have mandatory mipi config blocks. Initialize as generic panel */
791 dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
792 }
793
794 /* Find the sequence block and size for the given panel. */
795 static const u8 *
find_panel_sequence_block(const struct bdb_mipi_sequence * sequence,u16 panel_id,u32 * seq_size)796 find_panel_sequence_block(const struct bdb_mipi_sequence *sequence,
797 u16 panel_id, u32 *seq_size)
798 {
799 u32 total = get_blocksize(sequence);
800 const u8 *data = &sequence->data[0];
801 u8 current_id;
802 u32 current_size;
803 int header_size = sequence->version >= 3 ? 5 : 3;
804 int index = 0;
805 int i;
806
807 /* skip new block size */
808 if (sequence->version >= 3)
809 data += 4;
810
811 for (i = 0; i < MAX_MIPI_CONFIGURATIONS && index < total; i++) {
812 if (index + header_size > total) {
813 DRM_ERROR("Invalid sequence block (header)\n");
814 return NULL;
815 }
816
817 current_id = *(data + index);
818 if (sequence->version >= 3)
819 current_size = *((const u32 *)(data + index + 1));
820 else
821 current_size = *((const u16 *)(data + index + 1));
822
823 index += header_size;
824
825 if (index + current_size > total) {
826 DRM_ERROR("Invalid sequence block\n");
827 return NULL;
828 }
829
830 if (current_id == panel_id) {
831 *seq_size = current_size;
832 return data + index;
833 }
834
835 index += current_size;
836 }
837
838 DRM_ERROR("Sequence block detected but no valid configuration\n");
839
840 return NULL;
841 }
842
goto_next_sequence(const u8 * data,int index,int total)843 static int goto_next_sequence(const u8 *data, int index, int total)
844 {
845 u16 len;
846
847 /* Skip Sequence Byte. */
848 for (index = index + 1; index < total; index += len) {
849 u8 operation_byte = *(data + index);
850 index++;
851
852 switch (operation_byte) {
853 case MIPI_SEQ_ELEM_END:
854 return index;
855 case MIPI_SEQ_ELEM_SEND_PKT:
856 if (index + 4 > total)
857 return 0;
858
859 len = *((const u16 *)(data + index + 2)) + 4;
860 break;
861 case MIPI_SEQ_ELEM_DELAY:
862 len = 4;
863 break;
864 case MIPI_SEQ_ELEM_GPIO:
865 len = 2;
866 break;
867 case MIPI_SEQ_ELEM_I2C:
868 if (index + 7 > total)
869 return 0;
870 len = *(data + index + 6) + 7;
871 break;
872 default:
873 DRM_ERROR("Unknown operation byte\n");
874 return 0;
875 }
876 }
877
878 return 0;
879 }
880
goto_next_sequence_v3(const u8 * data,int index,int total)881 static int goto_next_sequence_v3(const u8 *data, int index, int total)
882 {
883 int seq_end;
884 u16 len;
885 u32 size_of_sequence;
886
887 /*
888 * Could skip sequence based on Size of Sequence alone, but also do some
889 * checking on the structure.
890 */
891 if (total < 5) {
892 DRM_ERROR("Too small sequence size\n");
893 return 0;
894 }
895
896 /* Skip Sequence Byte. */
897 index++;
898
899 /*
900 * Size of Sequence. Excludes the Sequence Byte and the size itself,
901 * includes MIPI_SEQ_ELEM_END byte, excludes the final MIPI_SEQ_END
902 * byte.
903 */
904 size_of_sequence = *((const uint32_t *)(data + index));
905 index += 4;
906
907 seq_end = index + size_of_sequence;
908 if (seq_end > total) {
909 DRM_ERROR("Invalid sequence size\n");
910 return 0;
911 }
912
913 for (; index < total; index += len) {
914 u8 operation_byte = *(data + index);
915 index++;
916
917 if (operation_byte == MIPI_SEQ_ELEM_END) {
918 if (index != seq_end) {
919 DRM_ERROR("Invalid element structure\n");
920 return 0;
921 }
922 return index;
923 }
924
925 len = *(data + index);
926 index++;
927
928 /*
929 * FIXME: Would be nice to check elements like for v1/v2 in
930 * goto_next_sequence() above.
931 */
932 switch (operation_byte) {
933 case MIPI_SEQ_ELEM_SEND_PKT:
934 case MIPI_SEQ_ELEM_DELAY:
935 case MIPI_SEQ_ELEM_GPIO:
936 case MIPI_SEQ_ELEM_I2C:
937 case MIPI_SEQ_ELEM_SPI:
938 case MIPI_SEQ_ELEM_PMIC:
939 break;
940 default:
941 DRM_ERROR("Unknown operation byte %u\n",
942 operation_byte);
943 break;
944 }
945 }
946
947 return 0;
948 }
949
950 static void
parse_mipi_sequence(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)951 parse_mipi_sequence(struct drm_i915_private *dev_priv,
952 const struct bdb_header *bdb)
953 {
954 int panel_type = dev_priv->vbt.panel_type;
955 const struct bdb_mipi_sequence *sequence;
956 const u8 *seq_data;
957 u32 seq_size;
958 u8 *data;
959 int index = 0;
960
961 /* Only our generic panel driver uses the sequence block. */
962 if (dev_priv->vbt.dsi.panel_id != MIPI_DSI_GENERIC_PANEL_ID)
963 return;
964
965 sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
966 if (!sequence) {
967 DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
968 return;
969 }
970
971 /* Fail gracefully for forward incompatible sequence block. */
972 if (sequence->version >= 4) {
973 DRM_ERROR("Unable to parse MIPI Sequence Block v%u\n",
974 sequence->version);
975 return;
976 }
977
978 DRM_DEBUG_DRIVER("Found MIPI sequence block v%u\n", sequence->version);
979
980 seq_data = find_panel_sequence_block(sequence, panel_type, &seq_size);
981 if (!seq_data)
982 return;
983
984 data = kmemdup(seq_data, seq_size, GFP_KERNEL);
985 if (!data)
986 return;
987
988 /* Parse the sequences, store pointers to each sequence. */
989 for (;;) {
990 u8 seq_id = *(data + index);
991 if (seq_id == MIPI_SEQ_END)
992 break;
993
994 if (seq_id >= MIPI_SEQ_MAX) {
995 DRM_ERROR("Unknown sequence %u\n", seq_id);
996 goto err;
997 }
998
999 dev_priv->vbt.dsi.sequence[seq_id] = data + index;
1000
1001 if (sequence->version >= 3)
1002 index = goto_next_sequence_v3(data, index, seq_size);
1003 else
1004 index = goto_next_sequence(data, index, seq_size);
1005 if (!index) {
1006 DRM_ERROR("Invalid sequence %u\n", seq_id);
1007 goto err;
1008 }
1009 }
1010
1011 dev_priv->vbt.dsi.data = data;
1012 dev_priv->vbt.dsi.size = seq_size;
1013 dev_priv->vbt.dsi.seq_version = sequence->version;
1014
1015 DRM_DEBUG_DRIVER("MIPI related VBT parsing complete\n");
1016 return;
1017
1018 err:
1019 kfree(data);
1020 memset(dev_priv->vbt.dsi.sequence, 0, sizeof(dev_priv->vbt.dsi.sequence));
1021 }
1022
translate_iboost(u8 val)1023 static u8 translate_iboost(u8 val)
1024 {
1025 static const u8 mapping[] = { 1, 3, 7 }; /* See VBT spec */
1026
1027 if (val >= ARRAY_SIZE(mapping)) {
1028 DRM_DEBUG_KMS("Unsupported I_boost value found in VBT (%d), display may not work properly\n", val);
1029 return 0;
1030 }
1031 return mapping[val];
1032 }
1033
sanitize_ddc_pin(struct drm_i915_private * dev_priv,enum port port)1034 static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,
1035 enum port port)
1036 {
1037 const struct ddi_vbt_port_info *info =
1038 &dev_priv->vbt.ddi_port_info[port];
1039 enum port p;
1040
1041 if (!info->alternate_ddc_pin)
1042 return;
1043
1044 for_each_port_masked(p, (1 << port) - 1) {
1045 struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p];
1046
1047 if (info->alternate_ddc_pin != i->alternate_ddc_pin)
1048 continue;
1049
1050 DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, "
1051 "disabling port %c DVI/HDMI support\n",
1052 port_name(p), i->alternate_ddc_pin,
1053 port_name(port), port_name(p));
1054
1055 /*
1056 * If we have multiple ports supposedly sharing the
1057 * pin, then dvi/hdmi couldn't exist on the shared
1058 * port. Otherwise they share the same ddc bin and
1059 * system couldn't communicate with them separately.
1060 *
1061 * Due to parsing the ports in alphabetical order,
1062 * a higher port will always clobber a lower one.
1063 */
1064 i->supports_dvi = false;
1065 i->supports_hdmi = false;
1066 i->alternate_ddc_pin = 0;
1067 }
1068 }
1069
sanitize_aux_ch(struct drm_i915_private * dev_priv,enum port port)1070 static void sanitize_aux_ch(struct drm_i915_private *dev_priv,
1071 enum port port)
1072 {
1073 const struct ddi_vbt_port_info *info =
1074 &dev_priv->vbt.ddi_port_info[port];
1075 enum port p;
1076
1077 if (!info->alternate_aux_channel)
1078 return;
1079
1080 for_each_port_masked(p, (1 << port) - 1) {
1081 struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p];
1082
1083 if (info->alternate_aux_channel != i->alternate_aux_channel)
1084 continue;
1085
1086 DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, "
1087 "disabling port %c DP support\n",
1088 port_name(p), i->alternate_aux_channel,
1089 port_name(port), port_name(p));
1090
1091 /*
1092 * If we have multiple ports supposedlt sharing the
1093 * aux channel, then DP couldn't exist on the shared
1094 * port. Otherwise they share the same aux channel
1095 * and system couldn't communicate with them separately.
1096 *
1097 * Due to parsing the ports in alphabetical order,
1098 * a higher port will always clobber a lower one.
1099 */
1100 i->supports_dp = false;
1101 i->alternate_aux_channel = 0;
1102 }
1103 }
1104
parse_ddi_port(struct drm_i915_private * dev_priv,enum port port,const struct bdb_header * bdb)1105 static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
1106 const struct bdb_header *bdb)
1107 {
1108 union child_device_config *it, *child = NULL;
1109 struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port];
1110 uint8_t hdmi_level_shift;
1111 int i, j;
1112 bool is_dvi, is_hdmi, is_dp, is_edp, is_crt;
1113 uint8_t aux_channel, ddc_pin;
1114 /* Each DDI port can have more than one value on the "DVO Port" field,
1115 * so look for all the possible values for each port and abort if more
1116 * than one is found. */
1117 int dvo_ports[][3] = {
1118 {DVO_PORT_HDMIA, DVO_PORT_DPA, -1},
1119 {DVO_PORT_HDMIB, DVO_PORT_DPB, -1},
1120 {DVO_PORT_HDMIC, DVO_PORT_DPC, -1},
1121 {DVO_PORT_HDMID, DVO_PORT_DPD, -1},
1122 {DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE},
1123 };
1124
1125 /* Find the child device to use, abort if more than one found. */
1126 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1127 it = dev_priv->vbt.child_dev + i;
1128
1129 for (j = 0; j < 3; j++) {
1130 if (dvo_ports[port][j] == -1)
1131 break;
1132
1133 if (it->common.dvo_port == dvo_ports[port][j]) {
1134 if (child) {
1135 DRM_DEBUG_KMS("More than one child device for port %c in VBT.\n",
1136 port_name(port));
1137 return;
1138 }
1139 child = it;
1140 }
1141 }
1142 }
1143 if (!child)
1144 return;
1145
1146 aux_channel = child->common.aux_channel;
1147 ddc_pin = child->common.ddc_pin;
1148
1149 is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING;
1150 is_dp = child->common.device_type & DEVICE_TYPE_DISPLAYPORT_OUTPUT;
1151 is_crt = child->common.device_type & DEVICE_TYPE_ANALOG_OUTPUT;
1152 is_hdmi = is_dvi && (child->common.device_type & DEVICE_TYPE_NOT_HDMI_OUTPUT) == 0;
1153 is_edp = is_dp && (child->common.device_type & DEVICE_TYPE_INTERNAL_CONNECTOR);
1154
1155 if (port == PORT_A && is_dvi) {
1156 DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n",
1157 is_hdmi ? "/HDMI" : "");
1158 is_dvi = false;
1159 is_hdmi = false;
1160 }
1161
1162 info->supports_dvi = is_dvi;
1163 info->supports_hdmi = is_hdmi;
1164 info->supports_dp = is_dp;
1165
1166 DRM_DEBUG_KMS("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d\n",
1167 port_name(port), is_dp, is_hdmi, is_dvi, is_edp, is_crt);
1168
1169 if (is_edp && is_dvi)
1170 DRM_DEBUG_KMS("Internal DP port %c is TMDS compatible\n",
1171 port_name(port));
1172 if (is_crt && port != PORT_E)
1173 DRM_DEBUG_KMS("Port %c is analog\n", port_name(port));
1174 if (is_crt && (is_dvi || is_dp))
1175 DRM_DEBUG_KMS("Analog port %c is also DP or TMDS compatible\n",
1176 port_name(port));
1177 if (is_dvi && (port == PORT_A || port == PORT_E))
1178 DRM_DEBUG_KMS("Port %c is TMDS compatible\n", port_name(port));
1179 if (!is_dvi && !is_dp && !is_crt)
1180 DRM_DEBUG_KMS("Port %c is not DP/TMDS/CRT compatible\n",
1181 port_name(port));
1182 if (is_edp && (port == PORT_B || port == PORT_C || port == PORT_E))
1183 DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
1184
1185 if (is_dvi) {
1186 info->alternate_ddc_pin = ddc_pin;
1187
1188 sanitize_ddc_pin(dev_priv, port);
1189 }
1190
1191 if (is_dp) {
1192 info->alternate_aux_channel = aux_channel;
1193
1194 sanitize_aux_ch(dev_priv, port);
1195 }
1196
1197 if (bdb->version >= 158) {
1198 /* The VBT HDMI level shift values match the table we have. */
1199 hdmi_level_shift = child->raw[7] & 0xF;
1200 DRM_DEBUG_KMS("VBT HDMI level shift for port %c: %d\n",
1201 port_name(port),
1202 hdmi_level_shift);
1203 info->hdmi_level_shift = hdmi_level_shift;
1204 }
1205
1206 /* Parse the I_boost config for SKL and above */
1207 if (bdb->version >= 196 && child->common.iboost) {
1208 info->dp_boost_level = translate_iboost(child->common.iboost_level & 0xF);
1209 DRM_DEBUG_KMS("VBT (e)DP boost level for port %c: %d\n",
1210 port_name(port), info->dp_boost_level);
1211 info->hdmi_boost_level = translate_iboost(child->common.iboost_level >> 4);
1212 DRM_DEBUG_KMS("VBT HDMI boost level for port %c: %d\n",
1213 port_name(port), info->hdmi_boost_level);
1214 }
1215 }
1216
parse_ddi_ports(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)1217 static void parse_ddi_ports(struct drm_i915_private *dev_priv,
1218 const struct bdb_header *bdb)
1219 {
1220 enum port port;
1221
1222 if (!HAS_DDI(dev_priv) && !IS_CHERRYVIEW(dev_priv))
1223 return;
1224
1225 if (!dev_priv->vbt.child_dev_num)
1226 return;
1227
1228 if (bdb->version < 155)
1229 return;
1230
1231 for (port = PORT_A; port < I915_MAX_PORTS; port++)
1232 parse_ddi_port(dev_priv, port, bdb);
1233 }
1234
1235 static void
parse_device_mapping(struct drm_i915_private * dev_priv,const struct bdb_header * bdb)1236 parse_device_mapping(struct drm_i915_private *dev_priv,
1237 const struct bdb_header *bdb)
1238 {
1239 const struct bdb_general_definitions *p_defs;
1240 const union child_device_config *p_child;
1241 union child_device_config *child_dev_ptr;
1242 int i, child_device_num, count;
1243 u8 expected_size;
1244 u16 block_size;
1245
1246 p_defs = find_section(bdb, BDB_GENERAL_DEFINITIONS);
1247 if (!p_defs) {
1248 DRM_DEBUG_KMS("No general definition block is found, no devices defined.\n");
1249 return;
1250 }
1251 if (bdb->version < 106) {
1252 expected_size = 22;
1253 } else if (bdb->version < 111) {
1254 expected_size = 27;
1255 } else if (bdb->version < 195) {
1256 BUILD_BUG_ON(sizeof(struct old_child_dev_config) != 33);
1257 expected_size = sizeof(struct old_child_dev_config);
1258 } else if (bdb->version == 195) {
1259 expected_size = 37;
1260 } else if (bdb->version <= 197) {
1261 expected_size = 38;
1262 } else {
1263 expected_size = 38;
1264 BUILD_BUG_ON(sizeof(*p_child) < 38);
1265 DRM_DEBUG_DRIVER("Expected child device config size for VBT version %u not known; assuming %u\n",
1266 bdb->version, expected_size);
1267 }
1268
1269 /* Flag an error for unexpected size, but continue anyway. */
1270 if (p_defs->child_dev_size != expected_size)
1271 DRM_ERROR("Unexpected child device config size %u (expected %u for VBT version %u)\n",
1272 p_defs->child_dev_size, expected_size, bdb->version);
1273
1274 /* The legacy sized child device config is the minimum we need. */
1275 if (p_defs->child_dev_size < sizeof(struct old_child_dev_config)) {
1276 DRM_DEBUG_KMS("Child device config size %u is too small.\n",
1277 p_defs->child_dev_size);
1278 return;
1279 }
1280
1281 /* get the block size of general definitions */
1282 block_size = get_blocksize(p_defs);
1283 /* get the number of child device */
1284 child_device_num = (block_size - sizeof(*p_defs)) /
1285 p_defs->child_dev_size;
1286 count = 0;
1287 /* get the number of child device that is present */
1288 for (i = 0; i < child_device_num; i++) {
1289 p_child = child_device_ptr(p_defs, i);
1290 if (!p_child->common.device_type) {
1291 /* skip the device block if device type is invalid */
1292 continue;
1293 }
1294 count++;
1295 }
1296 if (!count) {
1297 DRM_DEBUG_KMS("no child dev is parsed from VBT\n");
1298 return;
1299 }
1300 dev_priv->vbt.child_dev = kcalloc(count, sizeof(*p_child), GFP_KERNEL);
1301 if (!dev_priv->vbt.child_dev) {
1302 DRM_DEBUG_KMS("No memory space for child device\n");
1303 return;
1304 }
1305
1306 dev_priv->vbt.child_dev_num = count;
1307 count = 0;
1308 for (i = 0; i < child_device_num; i++) {
1309 p_child = child_device_ptr(p_defs, i);
1310 if (!p_child->common.device_type) {
1311 /* skip the device block if device type is invalid */
1312 continue;
1313 }
1314
1315 child_dev_ptr = dev_priv->vbt.child_dev + count;
1316 count++;
1317
1318 /*
1319 * Copy as much as we know (sizeof) and is available
1320 * (child_dev_size) of the child device. Accessing the data must
1321 * depend on VBT version.
1322 */
1323 memcpy(child_dev_ptr, p_child,
1324 min_t(size_t, p_defs->child_dev_size, sizeof(*p_child)));
1325
1326 /*
1327 * copied full block, now init values when they are not
1328 * available in current version
1329 */
1330 if (bdb->version < 196) {
1331 /* Set default values for bits added from v196 */
1332 child_dev_ptr->common.iboost = 0;
1333 child_dev_ptr->common.hpd_invert = 0;
1334 }
1335
1336 if (bdb->version < 192)
1337 child_dev_ptr->common.lspcon = 0;
1338 }
1339 return;
1340 }
1341
1342 /* Common defaults which may be overridden by VBT. */
1343 static void
init_vbt_defaults(struct drm_i915_private * dev_priv)1344 init_vbt_defaults(struct drm_i915_private *dev_priv)
1345 {
1346 enum port port;
1347
1348 dev_priv->vbt.crt_ddc_pin = GMBUS_PIN_VGADDC;
1349
1350 /* Default to having backlight */
1351 dev_priv->vbt.backlight.present = true;
1352
1353 /* LFP panel data */
1354 dev_priv->vbt.lvds_dither = 1;
1355 dev_priv->vbt.lvds_vbt = 0;
1356
1357 /* SDVO panel data */
1358 dev_priv->vbt.sdvo_lvds_vbt_mode = NULL;
1359
1360 /* general features */
1361 dev_priv->vbt.int_tv_support = 1;
1362 dev_priv->vbt.int_crt_support = 1;
1363
1364 /* Default to using SSC */
1365 dev_priv->vbt.lvds_use_ssc = 1;
1366 /*
1367 * Core/SandyBridge/IvyBridge use alternative (120MHz) reference
1368 * clock for LVDS.
1369 */
1370 dev_priv->vbt.lvds_ssc_freq = intel_bios_ssc_frequency(dev_priv,
1371 !HAS_PCH_SPLIT(dev_priv));
1372 DRM_DEBUG_KMS("Set default to SSC at %d kHz\n", dev_priv->vbt.lvds_ssc_freq);
1373
1374 for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1375 struct ddi_vbt_port_info *info =
1376 &dev_priv->vbt.ddi_port_info[port];
1377
1378 info->hdmi_level_shift = HDMI_LEVEL_SHIFT_UNKNOWN;
1379 }
1380 }
1381
1382 /* Defaults to initialize only if there is no VBT. */
1383 static void
init_vbt_missing_defaults(struct drm_i915_private * dev_priv)1384 init_vbt_missing_defaults(struct drm_i915_private *dev_priv)
1385 {
1386 enum port port;
1387
1388 for (port = PORT_A; port < I915_MAX_PORTS; port++) {
1389 struct ddi_vbt_port_info *info =
1390 &dev_priv->vbt.ddi_port_info[port];
1391
1392 info->supports_dvi = (port != PORT_A && port != PORT_E);
1393 info->supports_hdmi = info->supports_dvi;
1394 info->supports_dp = (port != PORT_E);
1395 }
1396 }
1397
get_bdb_header(const struct vbt_header * vbt)1398 static const struct bdb_header *get_bdb_header(const struct vbt_header *vbt)
1399 {
1400 const void *_vbt = vbt;
1401
1402 return _vbt + vbt->bdb_offset;
1403 }
1404
1405 /**
1406 * intel_bios_is_valid_vbt - does the given buffer contain a valid VBT
1407 * @buf: pointer to a buffer to validate
1408 * @size: size of the buffer
1409 *
1410 * Returns true on valid VBT.
1411 */
intel_bios_is_valid_vbt(const void * buf,size_t size)1412 bool intel_bios_is_valid_vbt(const void *buf, size_t size)
1413 {
1414 const struct vbt_header *vbt = buf;
1415 const struct bdb_header *bdb;
1416
1417 if (!vbt)
1418 return false;
1419
1420 if (sizeof(struct vbt_header) > size) {
1421 DRM_DEBUG_DRIVER("VBT header incomplete\n");
1422 return false;
1423 }
1424
1425 if (memcmp(vbt->signature, "$VBT", 4)) {
1426 DRM_DEBUG_DRIVER("VBT invalid signature\n");
1427 return false;
1428 }
1429
1430 if (vbt->bdb_offset + sizeof(struct bdb_header) > size) {
1431 DRM_DEBUG_DRIVER("BDB header incomplete\n");
1432 return false;
1433 }
1434
1435 bdb = get_bdb_header(vbt);
1436 if (vbt->bdb_offset + bdb->bdb_size > size) {
1437 DRM_DEBUG_DRIVER("BDB incomplete\n");
1438 return false;
1439 }
1440
1441 return vbt;
1442 }
1443
find_vbt(void __iomem * bios,size_t size)1444 static const struct vbt_header *find_vbt(void __iomem *bios, size_t size)
1445 {
1446 size_t i;
1447
1448 /* Scour memory looking for the VBT signature. */
1449 for (i = 0; i + 4 < size; i++) {
1450 void *vbt;
1451
1452 if (ioread32(bios + i) != *((const u32 *) "$VBT"))
1453 continue;
1454
1455 /*
1456 * This is the one place where we explicitly discard the address
1457 * space (__iomem) of the BIOS/VBT.
1458 */
1459 vbt = (void __force *) bios + i;
1460 if (intel_bios_is_valid_vbt(vbt, size - i))
1461 return vbt;
1462
1463 break;
1464 }
1465
1466 return NULL;
1467 }
1468
1469 /**
1470 * intel_bios_init - find VBT and initialize settings from the BIOS
1471 * @dev_priv: i915 device instance
1472 *
1473 * Parse and initialize settings from the Video BIOS Tables (VBT). If the VBT
1474 * was not found in ACPI OpRegion, try to find it in PCI ROM first. Also
1475 * initialize some defaults if the VBT is not present at all.
1476 */
intel_bios_init(struct drm_i915_private * dev_priv)1477 void intel_bios_init(struct drm_i915_private *dev_priv)
1478 {
1479 struct pci_dev *pdev = dev_priv->drm.pdev;
1480 const struct vbt_header *vbt = dev_priv->opregion.vbt;
1481 const struct bdb_header *bdb;
1482 u8 __iomem *bios = NULL;
1483
1484 if (HAS_PCH_NOP(dev_priv)) {
1485 DRM_DEBUG_KMS("Skipping VBT init due to disabled display.\n");
1486 return;
1487 }
1488
1489 init_vbt_defaults(dev_priv);
1490
1491 /* If the OpRegion does not have VBT, look in PCI ROM. */
1492 if (!vbt) {
1493 size_t size;
1494
1495 bios = pci_map_rom(pdev, &size);
1496 if (!bios)
1497 goto out;
1498
1499 vbt = find_vbt(bios, size);
1500 if (!vbt)
1501 goto out;
1502
1503 DRM_DEBUG_KMS("Found valid VBT in PCI ROM\n");
1504 }
1505
1506 bdb = get_bdb_header(vbt);
1507
1508 DRM_DEBUG_KMS("VBT signature \"%.*s\", BDB version %d\n",
1509 (int)sizeof(vbt->signature), vbt->signature, bdb->version);
1510
1511 /* Grab useful general definitions */
1512 parse_general_features(dev_priv, bdb);
1513 parse_general_definitions(dev_priv, bdb);
1514 parse_lfp_panel_data(dev_priv, bdb);
1515 parse_lfp_backlight(dev_priv, bdb);
1516 parse_sdvo_panel_data(dev_priv, bdb);
1517 parse_sdvo_device_mapping(dev_priv, bdb);
1518 parse_device_mapping(dev_priv, bdb);
1519 parse_driver_features(dev_priv, bdb);
1520 parse_edp(dev_priv, bdb);
1521 parse_psr(dev_priv, bdb);
1522 parse_mipi_config(dev_priv, bdb);
1523 parse_mipi_sequence(dev_priv, bdb);
1524 parse_ddi_ports(dev_priv, bdb);
1525
1526 out:
1527 if (!vbt) {
1528 DRM_INFO("Failed to find VBIOS tables (VBT)\n");
1529 init_vbt_missing_defaults(dev_priv);
1530 }
1531
1532 if (bios)
1533 pci_unmap_rom(pdev, bios);
1534 }
1535
1536 /**
1537 * intel_bios_is_tv_present - is integrated TV present in VBT
1538 * @dev_priv: i915 device instance
1539 *
1540 * Return true if TV is present. If no child devices were parsed from VBT,
1541 * assume TV is present.
1542 */
intel_bios_is_tv_present(struct drm_i915_private * dev_priv)1543 bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv)
1544 {
1545 union child_device_config *p_child;
1546 int i;
1547
1548 if (!dev_priv->vbt.int_tv_support)
1549 return false;
1550
1551 if (!dev_priv->vbt.child_dev_num)
1552 return true;
1553
1554 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1555 p_child = dev_priv->vbt.child_dev + i;
1556 /*
1557 * If the device type is not TV, continue.
1558 */
1559 switch (p_child->old.device_type) {
1560 case DEVICE_TYPE_INT_TV:
1561 case DEVICE_TYPE_TV:
1562 case DEVICE_TYPE_TV_SVIDEO_COMPOSITE:
1563 break;
1564 default:
1565 continue;
1566 }
1567 /* Only when the addin_offset is non-zero, it is regarded
1568 * as present.
1569 */
1570 if (p_child->old.addin_offset)
1571 return true;
1572 }
1573
1574 return false;
1575 }
1576
1577 /**
1578 * intel_bios_is_lvds_present - is LVDS present in VBT
1579 * @dev_priv: i915 device instance
1580 * @i2c_pin: i2c pin for LVDS if present
1581 *
1582 * Return true if LVDS is present. If no child devices were parsed from VBT,
1583 * assume LVDS is present.
1584 */
intel_bios_is_lvds_present(struct drm_i915_private * dev_priv,u8 * i2c_pin)1585 bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin)
1586 {
1587 int i;
1588
1589 if (!dev_priv->vbt.child_dev_num)
1590 return true;
1591
1592 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1593 union child_device_config *uchild = dev_priv->vbt.child_dev + i;
1594 struct old_child_dev_config *child = &uchild->old;
1595
1596 /* If the device type is not LFP, continue.
1597 * We have to check both the new identifiers as well as the
1598 * old for compatibility with some BIOSes.
1599 */
1600 if (child->device_type != DEVICE_TYPE_INT_LFP &&
1601 child->device_type != DEVICE_TYPE_LFP)
1602 continue;
1603
1604 if (intel_gmbus_is_valid_pin(dev_priv, child->i2c_pin))
1605 *i2c_pin = child->i2c_pin;
1606
1607 /* However, we cannot trust the BIOS writers to populate
1608 * the VBT correctly. Since LVDS requires additional
1609 * information from AIM blocks, a non-zero addin offset is
1610 * a good indicator that the LVDS is actually present.
1611 */
1612 if (child->addin_offset)
1613 return true;
1614
1615 /* But even then some BIOS writers perform some black magic
1616 * and instantiate the device without reference to any
1617 * additional data. Trust that if the VBT was written into
1618 * the OpRegion then they have validated the LVDS's existence.
1619 */
1620 if (dev_priv->opregion.vbt)
1621 return true;
1622 }
1623
1624 return false;
1625 }
1626
1627 /**
1628 * intel_bios_is_port_present - is the specified digital port present
1629 * @dev_priv: i915 device instance
1630 * @port: port to check
1631 *
1632 * Return true if the device in %port is present.
1633 */
intel_bios_is_port_present(struct drm_i915_private * dev_priv,enum port port)1634 bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port)
1635 {
1636 static const struct {
1637 u16 dp, hdmi;
1638 } port_mapping[] = {
1639 [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
1640 [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
1641 [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
1642 [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
1643 };
1644 int i;
1645
1646 /* FIXME maybe deal with port A as well? */
1647 if (WARN_ON(port == PORT_A) || port >= ARRAY_SIZE(port_mapping))
1648 return false;
1649
1650 if (!dev_priv->vbt.child_dev_num)
1651 return false;
1652
1653 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1654 const union child_device_config *p_child =
1655 &dev_priv->vbt.child_dev[i];
1656 if ((p_child->common.dvo_port == port_mapping[port].dp ||
1657 p_child->common.dvo_port == port_mapping[port].hdmi) &&
1658 (p_child->common.device_type & (DEVICE_TYPE_TMDS_DVI_SIGNALING |
1659 DEVICE_TYPE_DISPLAYPORT_OUTPUT)))
1660 return true;
1661 }
1662
1663 return false;
1664 }
1665
1666 /**
1667 * intel_bios_is_port_edp - is the device in given port eDP
1668 * @dev_priv: i915 device instance
1669 * @port: port to check
1670 *
1671 * Return true if the device in %port is eDP.
1672 */
intel_bios_is_port_edp(struct drm_i915_private * dev_priv,enum port port)1673 bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
1674 {
1675 union child_device_config *p_child;
1676 static const short port_mapping[] = {
1677 [PORT_B] = DVO_PORT_DPB,
1678 [PORT_C] = DVO_PORT_DPC,
1679 [PORT_D] = DVO_PORT_DPD,
1680 [PORT_E] = DVO_PORT_DPE,
1681 };
1682 int i;
1683
1684 if (!dev_priv->vbt.child_dev_num)
1685 return false;
1686
1687 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1688 p_child = dev_priv->vbt.child_dev + i;
1689
1690 if (p_child->common.dvo_port == port_mapping[port] &&
1691 (p_child->common.device_type & DEVICE_TYPE_eDP_BITS) ==
1692 (DEVICE_TYPE_eDP & DEVICE_TYPE_eDP_BITS))
1693 return true;
1694 }
1695
1696 return false;
1697 }
1698
child_dev_is_dp_dual_mode(const union child_device_config * p_child,enum port port)1699 static bool child_dev_is_dp_dual_mode(const union child_device_config *p_child,
1700 enum port port)
1701 {
1702 static const struct {
1703 u16 dp, hdmi;
1704 } port_mapping[] = {
1705 /*
1706 * Buggy VBTs may declare DP ports as having
1707 * HDMI type dvo_port :( So let's check both.
1708 */
1709 [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
1710 [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
1711 [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
1712 [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
1713 };
1714
1715 if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
1716 return false;
1717
1718 if ((p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) !=
1719 (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
1720 return false;
1721
1722 if (p_child->common.dvo_port == port_mapping[port].dp)
1723 return true;
1724
1725 /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */
1726 if (p_child->common.dvo_port == port_mapping[port].hdmi &&
1727 p_child->common.aux_channel != 0)
1728 return true;
1729
1730 return false;
1731 }
1732
intel_bios_is_port_dp_dual_mode(struct drm_i915_private * dev_priv,enum port port)1733 bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv,
1734 enum port port)
1735 {
1736 int i;
1737
1738 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1739 const union child_device_config *p_child =
1740 &dev_priv->vbt.child_dev[i];
1741
1742 if (child_dev_is_dp_dual_mode(p_child, port))
1743 return true;
1744 }
1745
1746 return false;
1747 }
1748
1749 /**
1750 * intel_bios_is_dsi_present - is DSI present in VBT
1751 * @dev_priv: i915 device instance
1752 * @port: port for DSI if present
1753 *
1754 * Return true if DSI is present, and return the port in %port.
1755 */
intel_bios_is_dsi_present(struct drm_i915_private * dev_priv,enum port * port)1756 bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv,
1757 enum port *port)
1758 {
1759 union child_device_config *p_child;
1760 u8 dvo_port;
1761 int i;
1762
1763 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1764 p_child = dev_priv->vbt.child_dev + i;
1765
1766 if (!(p_child->common.device_type & DEVICE_TYPE_MIPI_OUTPUT))
1767 continue;
1768
1769 dvo_port = p_child->common.dvo_port;
1770
1771 switch (dvo_port) {
1772 case DVO_PORT_MIPIA:
1773 case DVO_PORT_MIPIC:
1774 if (port)
1775 *port = dvo_port - DVO_PORT_MIPIA;
1776 return true;
1777 case DVO_PORT_MIPIB:
1778 case DVO_PORT_MIPID:
1779 DRM_DEBUG_KMS("VBT has unsupported DSI port %c\n",
1780 port_name(dvo_port - DVO_PORT_MIPIA));
1781 break;
1782 }
1783 }
1784
1785 return false;
1786 }
1787
1788 /**
1789 * intel_bios_is_port_hpd_inverted - is HPD inverted for %port
1790 * @dev_priv: i915 device instance
1791 * @port: port to check
1792 *
1793 * Return true if HPD should be inverted for %port.
1794 */
1795 bool
intel_bios_is_port_hpd_inverted(struct drm_i915_private * dev_priv,enum port port)1796 intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
1797 enum port port)
1798 {
1799 int i;
1800
1801 if (WARN_ON_ONCE(!IS_BROXTON(dev_priv)))
1802 return false;
1803
1804 for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
1805 if (!dev_priv->vbt.child_dev[i].common.hpd_invert)
1806 continue;
1807
1808 switch (dev_priv->vbt.child_dev[i].common.dvo_port) {
1809 case DVO_PORT_DPA:
1810 case DVO_PORT_HDMIA:
1811 if (port == PORT_A)
1812 return true;
1813 break;
1814 case DVO_PORT_DPB:
1815 case DVO_PORT_HDMIB:
1816 if (port == PORT_B)
1817 return true;
1818 break;
1819 case DVO_PORT_DPC:
1820 case DVO_PORT_HDMIC:
1821 if (port == PORT_C)
1822 return true;
1823 break;
1824 default:
1825 break;
1826 }
1827 }
1828
1829 return false;
1830 }
1831