1 /*
2 * C-Brick Serial Port (and console) driver for SGI Altix machines.
3 *
4 * This driver is NOT suitable for talking to the l1-controller for
5 * anything other than 'console activities' --- please use the l1
6 * driver for that.
7 *
8 *
9 * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
10 *
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of version 2 of the GNU General Public License
13 * as published by the Free Software Foundation.
14 *
15 * This program is distributed in the hope that it would be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
18 *
19 * Further, this software is distributed without any warranty that it is
20 * free of the rightful claim of any third person regarding infringement
21 * or the like. Any license provided herein, whether implied or
22 * otherwise, applies only to this software file. Patent licenses, if
23 * any, provided herein do not apply to combinations of this program with
24 * other software, or any other product whatsoever.
25 *
26 * You should have received a copy of the GNU General Public
27 * License along with this program; if not, write the Free Software
28 * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
29 *
30 * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
31 * Mountain View, CA 94043, or:
32 *
33 * http://www.sgi.com
34 *
35 * For further information regarding this notice, see:
36 *
37 * http://oss.sgi.com/projects/GenInfo/NoticeExplan
38 */
39
40 #include <linux/interrupt.h>
41 #include <linux/tty.h>
42 #include <linux/tty_flip.h>
43 #include <linux/serial.h>
44 #include <linux/console.h>
45 #include <linux/init.h>
46 #include <linux/sysrq.h>
47 #include <linux/circ_buf.h>
48 #include <linux/serial_reg.h>
49 #include <linux/delay.h> /* for mdelay */
50 #include <linux/miscdevice.h>
51 #include <linux/serial_core.h>
52
53 #include <asm/io.h>
54 #include <asm/sn/simulator.h>
55 #include <asm/sn/sn_sal.h>
56
57 /* number of characters we can transmit to the SAL console at a time */
58 #define SN_SAL_MAX_CHARS 120
59
60 /* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to
61 * avoid losing chars, (always has to be a power of 2) */
62 #define SN_SAL_BUFFER_SIZE (64 * (1 << 10))
63
64 #define SN_SAL_UART_FIFO_DEPTH 16
65 #define SN_SAL_UART_FIFO_SPEED_CPS (9600/10)
66
67 /* sn_transmit_chars() calling args */
68 #define TRANSMIT_BUFFERED 0
69 #define TRANSMIT_RAW 1
70
71 /* To use dynamic numbers only and not use the assigned major and minor,
72 * define the following.. */
73 /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */
74 #define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */
75
76 /* Device name we're using */
77 #define DEVICE_NAME "ttySG"
78 #define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */
79 /* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */
80 #define DEVICE_MAJOR 204
81 #define DEVICE_MINOR 40
82
83 #ifdef CONFIG_MAGIC_SYSRQ
84 static char sysrq_serial_str[] = "\eSYS";
85 static char *sysrq_serial_ptr = sysrq_serial_str;
86 static unsigned long sysrq_requested;
87 #endif /* CONFIG_MAGIC_SYSRQ */
88
89 /*
90 * Port definition - this kinda drives it all
91 */
92 struct sn_cons_port {
93 struct timer_list sc_timer;
94 struct uart_port sc_port;
95 struct sn_sal_ops {
96 int (*sal_puts_raw) (const char *s, int len);
97 int (*sal_puts) (const char *s, int len);
98 int (*sal_getc) (void);
99 int (*sal_input_pending) (void);
100 void (*sal_wakeup_transmit) (struct sn_cons_port *, int);
101 } *sc_ops;
102 unsigned long sc_interrupt_timeout;
103 int sc_is_asynch;
104 };
105
106 static struct sn_cons_port sal_console_port;
107 static int sn_process_input;
108
109 /* Only used if USE_DYNAMIC_MINOR is set to 1 */
110 static struct miscdevice misc; /* used with misc_register for dynamic */
111
112 extern void early_sn_setup(void);
113
114 #undef DEBUG
115 #ifdef DEBUG
116 static int sn_debug_printf(const char *fmt, ...);
117 #define DPRINTF(x...) sn_debug_printf(x)
118 #else
119 #define DPRINTF(x...) do { } while (0)
120 #endif
121
122 /* Prototypes */
123 static int snt_hw_puts_raw(const char *, int);
124 static int snt_hw_puts_buffered(const char *, int);
125 static int snt_poll_getc(void);
126 static int snt_poll_input_pending(void);
127 static int snt_intr_getc(void);
128 static int snt_intr_input_pending(void);
129 static void sn_transmit_chars(struct sn_cons_port *, int);
130
131 /* A table for polling:
132 */
133 static struct sn_sal_ops poll_ops = {
134 .sal_puts_raw = snt_hw_puts_raw,
135 .sal_puts = snt_hw_puts_raw,
136 .sal_getc = snt_poll_getc,
137 .sal_input_pending = snt_poll_input_pending
138 };
139
140 /* A table for interrupts enabled */
141 static struct sn_sal_ops intr_ops = {
142 .sal_puts_raw = snt_hw_puts_raw,
143 .sal_puts = snt_hw_puts_buffered,
144 .sal_getc = snt_intr_getc,
145 .sal_input_pending = snt_intr_input_pending,
146 .sal_wakeup_transmit = sn_transmit_chars
147 };
148
149 /* the console does output in two distinctly different ways:
150 * synchronous (raw) and asynchronous (buffered). initially, early_printk
151 * does synchronous output. any data written goes directly to the SAL
152 * to be output (incidentally, it is internally buffered by the SAL)
153 * after interrupts and timers are initialized and available for use,
154 * the console init code switches to asynchronous output. this is
155 * also the earliest opportunity to begin polling for console input.
156 * after console initialization, console output and tty (serial port)
157 * output is buffered and sent to the SAL asynchronously (either by
158 * timer callback or by UART interrupt) */
159
160 /* routines for running the console in polling mode */
161
162 /**
163 * snt_poll_getc - Get a character from the console in polling mode
164 *
165 */
snt_poll_getc(void)166 static int snt_poll_getc(void)
167 {
168 int ch;
169
170 ia64_sn_console_getc(&ch);
171 return ch;
172 }
173
174 /**
175 * snt_poll_input_pending - Check if any input is waiting - polling mode.
176 *
177 */
snt_poll_input_pending(void)178 static int snt_poll_input_pending(void)
179 {
180 int status, input;
181
182 status = ia64_sn_console_check(&input);
183 return !status && input;
184 }
185
186 /* routines for an interrupt driven console (normal) */
187
188 /**
189 * snt_intr_getc - Get a character from the console, interrupt mode
190 *
191 */
snt_intr_getc(void)192 static int snt_intr_getc(void)
193 {
194 return ia64_sn_console_readc();
195 }
196
197 /**
198 * snt_intr_input_pending - Check if input is pending, interrupt mode
199 *
200 */
snt_intr_input_pending(void)201 static int snt_intr_input_pending(void)
202 {
203 return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV;
204 }
205
206 /* these functions are polled and interrupt */
207
208 /**
209 * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode
210 * @s: String
211 * @len: Length
212 *
213 */
snt_hw_puts_raw(const char * s,int len)214 static int snt_hw_puts_raw(const char *s, int len)
215 {
216 /* this will call the PROM and not return until this is done */
217 return ia64_sn_console_putb(s, len);
218 }
219
220 /**
221 * snt_hw_puts_buffered - Send string to console, polled or interrupt mode
222 * @s: String
223 * @len: Length
224 *
225 */
snt_hw_puts_buffered(const char * s,int len)226 static int snt_hw_puts_buffered(const char *s, int len)
227 {
228 /* queue data to the PROM */
229 return ia64_sn_console_xmit_chars((char *)s, len);
230 }
231
232 /* uart interface structs
233 * These functions are associated with the uart_port that the serial core
234 * infrastructure calls.
235 *
236 * Note: Due to how the console works, many routines are no-ops.
237 */
238
239 /**
240 * snp_type - What type of console are we?
241 * @port: Port to operate with (we ignore since we only have one port)
242 *
243 */
snp_type(struct uart_port * port)244 static const char *snp_type(struct uart_port *port)
245 {
246 return ("SGI SN L1");
247 }
248
249 /**
250 * snp_tx_empty - Is the transmitter empty? We pretend we're always empty
251 * @port: Port to operate on (we ignore since we only have one port)
252 *
253 */
snp_tx_empty(struct uart_port * port)254 static unsigned int snp_tx_empty(struct uart_port *port)
255 {
256 return 1;
257 }
258
259 /**
260 * snp_stop_tx - stop the transmitter - no-op for us
261 * @port: Port to operat eon - we ignore - no-op function
262 *
263 */
snp_stop_tx(struct uart_port * port)264 static void snp_stop_tx(struct uart_port *port)
265 {
266 }
267
268 /**
269 * snp_release_port - Free i/o and resources for port - no-op for us
270 * @port: Port to operate on - we ignore - no-op function
271 *
272 */
snp_release_port(struct uart_port * port)273 static void snp_release_port(struct uart_port *port)
274 {
275 }
276
277 /**
278 * snp_shutdown - shut down the port - free irq and disable - no-op for us
279 * @port: Port to shut down - we ignore
280 *
281 */
snp_shutdown(struct uart_port * port)282 static void snp_shutdown(struct uart_port *port)
283 {
284 }
285
286 /**
287 * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console
288 * @port: Port to operate on - we ignore
289 * @mctrl: Lines to set/unset - we ignore
290 *
291 */
snp_set_mctrl(struct uart_port * port,unsigned int mctrl)292 static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl)
293 {
294 }
295
296 /**
297 * snp_get_mctrl - get contorl line info, we just return a static value
298 * @port: port to operate on - we only have one port so we ignore this
299 *
300 */
snp_get_mctrl(struct uart_port * port)301 static unsigned int snp_get_mctrl(struct uart_port *port)
302 {
303 return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS;
304 }
305
306 /**
307 * snp_stop_rx - Stop the receiver - we ignor ethis
308 * @port: Port to operate on - we ignore
309 *
310 */
snp_stop_rx(struct uart_port * port)311 static void snp_stop_rx(struct uart_port *port)
312 {
313 }
314
315 /**
316 * snp_start_tx - Start transmitter
317 * @port: Port to operate on
318 *
319 */
snp_start_tx(struct uart_port * port)320 static void snp_start_tx(struct uart_port *port)
321 {
322 if (sal_console_port.sc_ops->sal_wakeup_transmit)
323 sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port,
324 TRANSMIT_BUFFERED);
325
326 }
327
328 /**
329 * snp_break_ctl - handle breaks - ignored by us
330 * @port: Port to operate on
331 * @break_state: Break state
332 *
333 */
snp_break_ctl(struct uart_port * port,int break_state)334 static void snp_break_ctl(struct uart_port *port, int break_state)
335 {
336 }
337
338 /**
339 * snp_startup - Start up the serial port - always return 0 (We're always on)
340 * @port: Port to operate on
341 *
342 */
snp_startup(struct uart_port * port)343 static int snp_startup(struct uart_port *port)
344 {
345 return 0;
346 }
347
348 /**
349 * snp_set_termios - set termios stuff - we ignore these
350 * @port: port to operate on
351 * @termios: New settings
352 * @termios: Old
353 *
354 */
355 static void
snp_set_termios(struct uart_port * port,struct ktermios * termios,struct ktermios * old)356 snp_set_termios(struct uart_port *port, struct ktermios *termios,
357 struct ktermios *old)
358 {
359 }
360
361 /**
362 * snp_request_port - allocate resources for port - ignored by us
363 * @port: port to operate on
364 *
365 */
snp_request_port(struct uart_port * port)366 static int snp_request_port(struct uart_port *port)
367 {
368 return 0;
369 }
370
371 /**
372 * snp_config_port - allocate resources, set up - we ignore, we're always on
373 * @port: Port to operate on
374 * @flags: flags used for port setup
375 *
376 */
snp_config_port(struct uart_port * port,int flags)377 static void snp_config_port(struct uart_port *port, int flags)
378 {
379 }
380
381 /* Associate the uart functions above - given to serial core */
382
383 static struct uart_ops sn_console_ops = {
384 .tx_empty = snp_tx_empty,
385 .set_mctrl = snp_set_mctrl,
386 .get_mctrl = snp_get_mctrl,
387 .stop_tx = snp_stop_tx,
388 .start_tx = snp_start_tx,
389 .stop_rx = snp_stop_rx,
390 .break_ctl = snp_break_ctl,
391 .startup = snp_startup,
392 .shutdown = snp_shutdown,
393 .set_termios = snp_set_termios,
394 .pm = NULL,
395 .type = snp_type,
396 .release_port = snp_release_port,
397 .request_port = snp_request_port,
398 .config_port = snp_config_port,
399 .verify_port = NULL,
400 };
401
402 /* End of uart struct functions and defines */
403
404 #ifdef DEBUG
405
406 /**
407 * sn_debug_printf - close to hardware debugging printf
408 * @fmt: printf format
409 *
410 * This is as "close to the metal" as we can get, used when the driver
411 * itself may be broken.
412 *
413 */
sn_debug_printf(const char * fmt,...)414 static int sn_debug_printf(const char *fmt, ...)
415 {
416 static char printk_buf[1024];
417 int printed_len;
418 va_list args;
419
420 va_start(args, fmt);
421 printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args);
422
423 if (!sal_console_port.sc_ops) {
424 sal_console_port.sc_ops = &poll_ops;
425 early_sn_setup();
426 }
427 sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len);
428
429 va_end(args);
430 return printed_len;
431 }
432 #endif /* DEBUG */
433
434 /*
435 * Interrupt handling routines.
436 */
437
438 /**
439 * sn_receive_chars - Grab characters, pass them to tty layer
440 * @port: Port to operate on
441 * @flags: irq flags
442 *
443 * Note: If we're not registered with the serial core infrastructure yet,
444 * we don't try to send characters to it...
445 *
446 */
447 static void
sn_receive_chars(struct sn_cons_port * port,unsigned long flags)448 sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
449 {
450 struct tty_port *tport = NULL;
451 int ch;
452
453 if (!port) {
454 printk(KERN_ERR "sn_receive_chars - port NULL so can't receive\n");
455 return;
456 }
457
458 if (!port->sc_ops) {
459 printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receive\n");
460 return;
461 }
462
463 if (port->sc_port.state) {
464 /* The serial_core stuffs are initialized, use them */
465 tport = &port->sc_port.state->port;
466 }
467
468 while (port->sc_ops->sal_input_pending()) {
469 ch = port->sc_ops->sal_getc();
470 if (ch < 0) {
471 printk(KERN_ERR "sn_console: An error occurred while "
472 "obtaining data from the console (0x%0x)\n", ch);
473 break;
474 }
475 #ifdef CONFIG_MAGIC_SYSRQ
476 if (sysrq_requested) {
477 unsigned long sysrq_timeout = sysrq_requested + HZ*5;
478
479 sysrq_requested = 0;
480 if (ch && time_before(jiffies, sysrq_timeout)) {
481 spin_unlock_irqrestore(&port->sc_port.lock, flags);
482 handle_sysrq(ch);
483 spin_lock_irqsave(&port->sc_port.lock, flags);
484 /* ignore actual sysrq command char */
485 continue;
486 }
487 }
488 if (ch == *sysrq_serial_ptr) {
489 if (!(*++sysrq_serial_ptr)) {
490 sysrq_requested = jiffies;
491 sysrq_serial_ptr = sysrq_serial_str;
492 }
493 /*
494 * ignore the whole sysrq string except for the
495 * leading escape
496 */
497 if (ch != '\e')
498 continue;
499 }
500 else
501 sysrq_serial_ptr = sysrq_serial_str;
502 #endif /* CONFIG_MAGIC_SYSRQ */
503
504 /* record the character to pass up to the tty layer */
505 if (tport) {
506 if (tty_insert_flip_char(tport, ch, TTY_NORMAL) == 0)
507 break;
508 }
509 port->sc_port.icount.rx++;
510 }
511
512 if (tport)
513 tty_flip_buffer_push(tport);
514 }
515
516 /**
517 * sn_transmit_chars - grab characters from serial core, send off
518 * @port: Port to operate on
519 * @raw: Transmit raw or buffered
520 *
521 * Note: If we're early, before we're registered with serial core, the
522 * writes are going through sn_sal_console_write because that's how
523 * register_console has been set up. We currently could have asynch
524 * polls calling this function due to sn_sal_switch_to_asynch but we can
525 * ignore them until we register with the serial core stuffs.
526 *
527 */
sn_transmit_chars(struct sn_cons_port * port,int raw)528 static void sn_transmit_chars(struct sn_cons_port *port, int raw)
529 {
530 int xmit_count, tail, head, loops, ii;
531 int result;
532 char *start;
533 struct circ_buf *xmit;
534
535 if (!port)
536 return;
537
538 BUG_ON(!port->sc_is_asynch);
539
540 if (port->sc_port.state) {
541 /* We're initialized, using serial core infrastructure */
542 xmit = &port->sc_port.state->xmit;
543 } else {
544 /* Probably sn_sal_switch_to_asynch has been run but serial core isn't
545 * initialized yet. Just return. Writes are going through
546 * sn_sal_console_write (due to register_console) at this time.
547 */
548 return;
549 }
550
551 if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) {
552 /* Nothing to do. */
553 ia64_sn_console_intr_disable(SAL_CONSOLE_INTR_XMIT);
554 return;
555 }
556
557 head = xmit->head;
558 tail = xmit->tail;
559 start = &xmit->buf[tail];
560
561 /* twice around gets the tail to the end of the buffer and
562 * then to the head, if needed */
563 loops = (head < tail) ? 2 : 1;
564
565 for (ii = 0; ii < loops; ii++) {
566 xmit_count = (head < tail) ?
567 (UART_XMIT_SIZE - tail) : (head - tail);
568
569 if (xmit_count > 0) {
570 if (raw == TRANSMIT_RAW)
571 result =
572 port->sc_ops->sal_puts_raw(start,
573 xmit_count);
574 else
575 result =
576 port->sc_ops->sal_puts(start, xmit_count);
577 #ifdef DEBUG
578 if (!result)
579 DPRINTF("`");
580 #endif
581 if (result > 0) {
582 xmit_count -= result;
583 port->sc_port.icount.tx += result;
584 tail += result;
585 tail &= UART_XMIT_SIZE - 1;
586 xmit->tail = tail;
587 start = &xmit->buf[tail];
588 }
589 }
590 }
591
592 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
593 uart_write_wakeup(&port->sc_port);
594
595 if (uart_circ_empty(xmit))
596 snp_stop_tx(&port->sc_port); /* no-op for us */
597 }
598
599 /**
600 * sn_sal_interrupt - Handle console interrupts
601 * @irq: irq #, useful for debug statements
602 * @dev_id: our pointer to our port (sn_cons_port which contains the uart port)
603 *
604 */
sn_sal_interrupt(int irq,void * dev_id)605 static irqreturn_t sn_sal_interrupt(int irq, void *dev_id)
606 {
607 struct sn_cons_port *port = (struct sn_cons_port *)dev_id;
608 unsigned long flags;
609 int status = ia64_sn_console_intr_status();
610
611 if (!port)
612 return IRQ_NONE;
613
614 spin_lock_irqsave(&port->sc_port.lock, flags);
615 if (status & SAL_CONSOLE_INTR_RECV) {
616 sn_receive_chars(port, flags);
617 }
618 if (status & SAL_CONSOLE_INTR_XMIT) {
619 sn_transmit_chars(port, TRANSMIT_BUFFERED);
620 }
621 spin_unlock_irqrestore(&port->sc_port.lock, flags);
622 return IRQ_HANDLED;
623 }
624
625 /**
626 * sn_sal_timer_poll - this function handles polled console mode
627 * @data: A pointer to our sn_cons_port (which contains the uart port)
628 *
629 * data is the pointer that init_timer will store for us. This function is
630 * associated with init_timer to see if there is any console traffic.
631 * Obviously not used in interrupt mode
632 *
633 */
sn_sal_timer_poll(unsigned long data)634 static void sn_sal_timer_poll(unsigned long data)
635 {
636 struct sn_cons_port *port = (struct sn_cons_port *)data;
637 unsigned long flags;
638
639 if (!port)
640 return;
641
642 if (!port->sc_port.irq) {
643 spin_lock_irqsave(&port->sc_port.lock, flags);
644 if (sn_process_input)
645 sn_receive_chars(port, flags);
646 sn_transmit_chars(port, TRANSMIT_RAW);
647 spin_unlock_irqrestore(&port->sc_port.lock, flags);
648 mod_timer(&port->sc_timer,
649 jiffies + port->sc_interrupt_timeout);
650 }
651 }
652
653 /*
654 * Boot-time initialization code
655 */
656
657 /**
658 * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch)
659 * @port: Our sn_cons_port (which contains the uart port)
660 *
661 * So this is used by sn_sal_serial_console_init (early on, before we're
662 * registered with serial core). It's also used by sn_sal_init
663 * right after we've registered with serial core. The later only happens
664 * if we didn't already come through here via sn_sal_serial_console_init.
665 *
666 */
sn_sal_switch_to_asynch(struct sn_cons_port * port)667 static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
668 {
669 unsigned long flags;
670
671 if (!port)
672 return;
673
674 DPRINTF("sn_console: about to switch to asynchronous console\n");
675
676 /* without early_printk, we may be invoked late enough to race
677 * with other cpus doing console IO at this point, however
678 * console interrupts will never be enabled */
679 spin_lock_irqsave(&port->sc_port.lock, flags);
680
681 /* early_printk invocation may have done this for us */
682 if (!port->sc_ops)
683 port->sc_ops = &poll_ops;
684
685 /* we can't turn on the console interrupt (as request_irq
686 * calls kmalloc, which isn't set up yet), so we rely on a
687 * timer to poll for input and push data from the console
688 * buffer.
689 */
690 init_timer(&port->sc_timer);
691 port->sc_timer.function = sn_sal_timer_poll;
692 port->sc_timer.data = (unsigned long)port;
693
694 if (IS_RUNNING_ON_SIMULATOR())
695 port->sc_interrupt_timeout = 6;
696 else {
697 /* 960cps / 16 char FIFO = 60HZ
698 * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */
699 port->sc_interrupt_timeout =
700 HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS;
701 }
702 mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout);
703
704 port->sc_is_asynch = 1;
705 spin_unlock_irqrestore(&port->sc_port.lock, flags);
706 }
707
708 /**
709 * sn_sal_switch_to_interrupts - Switch to interrupt driven mode
710 * @port: Our sn_cons_port (which contains the uart port)
711 *
712 * In sn_sal_init, after we're registered with serial core and
713 * the port is added, this function is called to switch us to interrupt
714 * mode. We were previously in asynch/polling mode (using init_timer).
715 *
716 * We attempt to switch to interrupt mode here by calling
717 * request_irq. If that works out, we enable receive interrupts.
718 */
sn_sal_switch_to_interrupts(struct sn_cons_port * port)719 static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
720 {
721 unsigned long flags;
722
723 if (port) {
724 DPRINTF("sn_console: switching to interrupt driven console\n");
725
726 if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
727 IRQF_SHARED,
728 "SAL console driver", port) >= 0) {
729 spin_lock_irqsave(&port->sc_port.lock, flags);
730 port->sc_port.irq = SGI_UART_VECTOR;
731 port->sc_ops = &intr_ops;
732 irq_set_handler(port->sc_port.irq, handle_level_irq);
733
734 /* turn on receive interrupts */
735 ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
736 spin_unlock_irqrestore(&port->sc_port.lock, flags);
737 }
738 else {
739 printk(KERN_INFO
740 "sn_console: console proceeding in polled mode\n");
741 }
742 }
743 }
744
745 /*
746 * Kernel console definitions
747 */
748
749 static void sn_sal_console_write(struct console *, const char *, unsigned);
750 static int sn_sal_console_setup(struct console *, char *);
751 static struct uart_driver sal_console_uart;
752 extern struct tty_driver *uart_console_device(struct console *, int *);
753
754 static struct console sal_console = {
755 .name = DEVICE_NAME,
756 .write = sn_sal_console_write,
757 .device = uart_console_device,
758 .setup = sn_sal_console_setup,
759 .index = -1, /* unspecified */
760 .data = &sal_console_uart,
761 };
762
763 #define SAL_CONSOLE &sal_console
764
765 static struct uart_driver sal_console_uart = {
766 .owner = THIS_MODULE,
767 .driver_name = "sn_console",
768 .dev_name = DEVICE_NAME,
769 .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */
770 .minor = 0,
771 .nr = 1, /* one port */
772 .cons = SAL_CONSOLE,
773 };
774
775 /**
776 * sn_sal_init - When the kernel loads us, get us rolling w/ serial core
777 *
778 * Before this is called, we've been printing kernel messages in a special
779 * early mode not making use of the serial core infrastructure. When our
780 * driver is loaded for real, we register the driver and port with serial
781 * core and try to enable interrupt driven mode.
782 *
783 */
sn_sal_init(void)784 static int __init sn_sal_init(void)
785 {
786 int retval;
787
788 if (!ia64_platform_is("sn2"))
789 return 0;
790
791 printk(KERN_INFO "sn_console: Console driver init\n");
792
793 if (USE_DYNAMIC_MINOR == 1) {
794 misc.minor = MISC_DYNAMIC_MINOR;
795 misc.name = DEVICE_NAME_DYNAMIC;
796 retval = misc_register(&misc);
797 if (retval != 0) {
798 printk(KERN_WARNING "Failed to register console "
799 "device using misc_register.\n");
800 return -ENODEV;
801 }
802 sal_console_uart.major = MISC_MAJOR;
803 sal_console_uart.minor = misc.minor;
804 } else {
805 sal_console_uart.major = DEVICE_MAJOR;
806 sal_console_uart.minor = DEVICE_MINOR;
807 }
808
809 /* We register the driver and the port before switching to interrupts
810 * or async above so the proper uart structures are populated */
811
812 if (uart_register_driver(&sal_console_uart) < 0) {
813 printk
814 ("ERROR sn_sal_init failed uart_register_driver, line %d\n",
815 __LINE__);
816 return -ENODEV;
817 }
818
819 spin_lock_init(&sal_console_port.sc_port.lock);
820
821 /* Setup the port struct with the minimum needed */
822 sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */
823 sal_console_port.sc_port.type = PORT_16550A;
824 sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS;
825 sal_console_port.sc_port.ops = &sn_console_ops;
826 sal_console_port.sc_port.line = 0;
827
828 if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) {
829 /* error - not sure what I'd do - so I'll do nothing */
830 printk(KERN_ERR "%s: unable to add port\n", __func__);
831 }
832
833 /* when this driver is compiled in, the console initialization
834 * will have already switched us into asynchronous operation
835 * before we get here through the initcalls */
836 if (!sal_console_port.sc_is_asynch) {
837 sn_sal_switch_to_asynch(&sal_console_port);
838 }
839
840 /* at this point (device_init) we can try to turn on interrupts */
841 if (!IS_RUNNING_ON_SIMULATOR()) {
842 sn_sal_switch_to_interrupts(&sal_console_port);
843 }
844 sn_process_input = 1;
845 return 0;
846 }
847 device_initcall(sn_sal_init);
848
849 /**
850 * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required
851 * @puts_raw : puts function to do the writing
852 * @s: input string
853 * @count: length
854 *
855 * We need a \r ahead of every \n for direct writes through
856 * ia64_sn_console_putb (what sal_puts_raw below actually does).
857 *
858 */
859
puts_raw_fixed(int (* puts_raw)(const char * s,int len),const char * s,int count)860 static void puts_raw_fixed(int (*puts_raw) (const char *s, int len),
861 const char *s, int count)
862 {
863 const char *s1;
864
865 /* Output '\r' before each '\n' */
866 while ((s1 = memchr(s, '\n', count)) != NULL) {
867 puts_raw(s, s1 - s);
868 puts_raw("\r\n", 2);
869 count -= s1 + 1 - s;
870 s = s1 + 1;
871 }
872 puts_raw(s, count);
873 }
874
875 /**
876 * sn_sal_console_write - Print statements before serial core available
877 * @console: Console to operate on - we ignore since we have just one
878 * @s: String to send
879 * @count: length
880 *
881 * This is referenced in the console struct. It is used for early
882 * console printing before we register with serial core and for things
883 * such as kdb. The console_lock must be held when we get here.
884 *
885 * This function has some code for trying to print output even if the lock
886 * is held. We try to cover the case where a lock holder could have died.
887 * We don't use this special case code if we're not registered with serial
888 * core yet. After we're registered with serial core, the only time this
889 * function would be used is for high level kernel output like magic sys req,
890 * kdb, and printk's.
891 */
892 static void
sn_sal_console_write(struct console * co,const char * s,unsigned count)893 sn_sal_console_write(struct console *co, const char *s, unsigned count)
894 {
895 unsigned long flags = 0;
896 struct sn_cons_port *port = &sal_console_port;
897 static int stole_lock = 0;
898
899 BUG_ON(!port->sc_is_asynch);
900
901 /* We can't look at the xmit buffer if we're not registered with serial core
902 * yet. So only do the fancy recovery after registering
903 */
904 if (!port->sc_port.state) {
905 /* Not yet registered with serial core - simple case */
906 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
907 return;
908 }
909
910 /* somebody really wants this output, might be an
911 * oops, kdb, panic, etc. make sure they get it. */
912 if (spin_is_locked(&port->sc_port.lock)) {
913 int lhead = port->sc_port.state->xmit.head;
914 int ltail = port->sc_port.state->xmit.tail;
915 int counter, got_lock = 0;
916
917 /*
918 * We attempt to determine if someone has died with the
919 * lock. We wait ~20 secs after the head and tail ptrs
920 * stop moving and assume the lock holder is not functional
921 * and plow ahead. If the lock is freed within the time out
922 * period we re-get the lock and go ahead normally. We also
923 * remember if we have plowed ahead so that we don't have
924 * to wait out the time out period again - the asumption
925 * is that we will time out again.
926 */
927
928 for (counter = 0; counter < 150; mdelay(125), counter++) {
929 if (!spin_is_locked(&port->sc_port.lock)
930 || stole_lock) {
931 if (!stole_lock) {
932 spin_lock_irqsave(&port->sc_port.lock,
933 flags);
934 got_lock = 1;
935 }
936 break;
937 } else {
938 /* still locked */
939 if ((lhead != port->sc_port.state->xmit.head)
940 || (ltail !=
941 port->sc_port.state->xmit.tail)) {
942 lhead =
943 port->sc_port.state->xmit.head;
944 ltail =
945 port->sc_port.state->xmit.tail;
946 counter = 0;
947 }
948 }
949 }
950 /* flush anything in the serial core xmit buffer, raw */
951 sn_transmit_chars(port, 1);
952 if (got_lock) {
953 spin_unlock_irqrestore(&port->sc_port.lock, flags);
954 stole_lock = 0;
955 } else {
956 /* fell thru */
957 stole_lock = 1;
958 }
959 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
960 } else {
961 stole_lock = 0;
962 spin_lock_irqsave(&port->sc_port.lock, flags);
963 sn_transmit_chars(port, 1);
964 spin_unlock_irqrestore(&port->sc_port.lock, flags);
965
966 puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
967 }
968 }
969
970
971 /**
972 * sn_sal_console_setup - Set up console for early printing
973 * @co: Console to work with
974 * @options: Options to set
975 *
976 * Altix console doesn't do anything with baud rates, etc, anyway.
977 *
978 * This isn't required since not providing the setup function in the
979 * console struct is ok. However, other patches like KDB plop something
980 * here so providing it is easier.
981 *
982 */
sn_sal_console_setup(struct console * co,char * options)983 static int sn_sal_console_setup(struct console *co, char *options)
984 {
985 return 0;
986 }
987
988 /**
989 * sn_sal_console_write_early - simple early output routine
990 * @co - console struct
991 * @s - string to print
992 * @count - count
993 *
994 * Simple function to provide early output, before even
995 * sn_sal_serial_console_init is called. Referenced in the
996 * console struct registerd in sn_serial_console_early_setup.
997 *
998 */
999 static void __init
sn_sal_console_write_early(struct console * co,const char * s,unsigned count)1000 sn_sal_console_write_early(struct console *co, const char *s, unsigned count)
1001 {
1002 puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count);
1003 }
1004
1005 /* Used for very early console printing - again, before
1006 * sn_sal_serial_console_init is run */
1007 static struct console sal_console_early __initdata = {
1008 .name = "sn_sal",
1009 .write = sn_sal_console_write_early,
1010 .flags = CON_PRINTBUFFER,
1011 .index = -1,
1012 };
1013
1014 /**
1015 * sn_serial_console_early_setup - Sets up early console output support
1016 *
1017 * Register a console early on... This is for output before even
1018 * sn_sal_serial_cosnole_init is called. This function is called from
1019 * setup.c. This allows us to do really early polled writes. When
1020 * sn_sal_serial_console_init is called, this console is unregistered
1021 * and a new one registered.
1022 */
sn_serial_console_early_setup(void)1023 int __init sn_serial_console_early_setup(void)
1024 {
1025 if (!ia64_platform_is("sn2"))
1026 return -1;
1027
1028 sal_console_port.sc_ops = &poll_ops;
1029 spin_lock_init(&sal_console_port.sc_port.lock);
1030 early_sn_setup(); /* Find SAL entry points */
1031 register_console(&sal_console_early);
1032
1033 return 0;
1034 }
1035
1036 /**
1037 * sn_sal_serial_console_init - Early console output - set up for register
1038 *
1039 * This function is called when regular console init happens. Because we
1040 * support even earlier console output with sn_serial_console_early_setup
1041 * (called from setup.c directly), this function unregisters the really
1042 * early console.
1043 *
1044 * Note: Even if setup.c doesn't register sal_console_early, unregistering
1045 * it here doesn't hurt anything.
1046 *
1047 */
sn_sal_serial_console_init(void)1048 static int __init sn_sal_serial_console_init(void)
1049 {
1050 if (ia64_platform_is("sn2")) {
1051 sn_sal_switch_to_asynch(&sal_console_port);
1052 DPRINTF("sn_sal_serial_console_init : register console\n");
1053 register_console(&sal_console);
1054 unregister_console(&sal_console_early);
1055 }
1056 return 0;
1057 }
1058
1059 console_initcall(sn_sal_serial_console_init);
1060