• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9  * Copyright (C) 2016 Intel Deutschland GmbH
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of version 2 of the GNU General Public License as
13  * published by the Free Software Foundation.
14  *
15  * This program is distributed in the hope that it will be useful, but
16  * WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
18  * General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
23  * USA
24  *
25  * The full GNU General Public License is included in this distribution
26  * in the file called COPYING.
27  *
28  * Contact Information:
29  *  Intel Linux Wireless <linuxwifi@intel.com>
30  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
31  *
32  * BSD LICENSE
33  *
34  * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
35  * Copyright (C) 2016 Intel Deutschland GmbH
36  * All rights reserved.
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  *
42  *  * Redistributions of source code must retain the above copyright
43  *    notice, this list of conditions and the following disclaimer.
44  *  * Redistributions in binary form must reproduce the above copyright
45  *    notice, this list of conditions and the following disclaimer in
46  *    the documentation and/or other materials provided with the
47  *    distribution.
48  *  * Neither the name Intel Corporation nor the names of its
49  *    contributors may be used to endorse or promote products derived
50  *    from this software without specific prior written permission.
51  *
52  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
53  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
54  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
55  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
56  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
57  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
58  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
59  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
60  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
61  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
62  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
63  *
64  *****************************************************************************/
65 #ifndef __IWL_CONFIG_H__
66 #define __IWL_CONFIG_H__
67 
68 #include <linux/types.h>
69 #include <linux/netdevice.h>
70 #include <linux/ieee80211.h>
71 #include <linux/nl80211.h>
72 
73 enum iwl_device_family {
74 	IWL_DEVICE_FAMILY_UNDEFINED,
75 	IWL_DEVICE_FAMILY_1000,
76 	IWL_DEVICE_FAMILY_100,
77 	IWL_DEVICE_FAMILY_2000,
78 	IWL_DEVICE_FAMILY_2030,
79 	IWL_DEVICE_FAMILY_105,
80 	IWL_DEVICE_FAMILY_135,
81 	IWL_DEVICE_FAMILY_5000,
82 	IWL_DEVICE_FAMILY_5150,
83 	IWL_DEVICE_FAMILY_6000,
84 	IWL_DEVICE_FAMILY_6000i,
85 	IWL_DEVICE_FAMILY_6005,
86 	IWL_DEVICE_FAMILY_6030,
87 	IWL_DEVICE_FAMILY_6050,
88 	IWL_DEVICE_FAMILY_6150,
89 	IWL_DEVICE_FAMILY_7000,
90 	IWL_DEVICE_FAMILY_8000,
91 };
92 
iwl_has_secure_boot(u32 hw_rev,enum iwl_device_family family)93 static inline bool iwl_has_secure_boot(u32 hw_rev,
94 				       enum iwl_device_family family)
95 {
96 	/* return 1 only for family 8000 B0 */
97 	if ((family == IWL_DEVICE_FAMILY_8000) && (hw_rev & 0xC))
98 		return true;
99 
100 	return false;
101 }
102 
103 /*
104  * LED mode
105  *    IWL_LED_DEFAULT:  use device default
106  *    IWL_LED_RF_STATE: turn LED on/off based on RF state
107  *			LED ON  = RF ON
108  *			LED OFF = RF OFF
109  *    IWL_LED_BLINK:    adjust led blink rate based on blink table
110  *    IWL_LED_DISABLE:	led disabled
111  */
112 enum iwl_led_mode {
113 	IWL_LED_DEFAULT,
114 	IWL_LED_RF_STATE,
115 	IWL_LED_BLINK,
116 	IWL_LED_DISABLE,
117 };
118 
119 /*
120  * This is the threshold value of plcp error rate per 100mSecs.  It is
121  * used to set and check for the validity of plcp_delta.
122  */
123 #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN		1
124 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF		50
125 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	100
126 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF	200
127 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX		255
128 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE	0
129 
130 /* TX queue watchdog timeouts in mSecs */
131 #define IWL_WATCHDOG_DISABLED	0
132 #define IWL_DEF_WD_TIMEOUT	2500
133 #define IWL_LONG_WD_TIMEOUT	10000
134 #define IWL_MAX_WD_TIMEOUT	120000
135 
136 #define IWL_DEFAULT_MAX_TX_POWER 22
137 #define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\
138 				 NETIF_F_TSO | NETIF_F_TSO6)
139 
140 /* Antenna presence definitions */
141 #define	ANT_NONE	0x0
142 #define	ANT_A		BIT(0)
143 #define	ANT_B		BIT(1)
144 #define ANT_C		BIT(2)
145 #define	ANT_AB		(ANT_A | ANT_B)
146 #define	ANT_AC		(ANT_A | ANT_C)
147 #define ANT_BC		(ANT_B | ANT_C)
148 #define ANT_ABC		(ANT_A | ANT_B | ANT_C)
149 
num_of_ant(u8 mask)150 static inline u8 num_of_ant(u8 mask)
151 {
152 	return  !!((mask) & ANT_A) +
153 		!!((mask) & ANT_B) +
154 		!!((mask) & ANT_C);
155 }
156 
157 /*
158  * @max_ll_items: max number of OTP blocks
159  * @shadow_ram_support: shadow support for OTP memory
160  * @led_compensation: compensate on the led on/off time per HW according
161  *	to the deviation to achieve the desired led frequency.
162  *	The detail algorithm is described in iwl-led.c
163  * @wd_timeout: TX queues watchdog timeout
164  * @max_event_log_size: size of event log buffer size for ucode event logging
165  * @shadow_reg_enable: HW shadow register support
166  * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command
167  *	is in flight. This is due to a HW bug in 7260, 3160 and 7265.
168  * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled.
169  */
170 struct iwl_base_params {
171 	unsigned int wd_timeout;
172 
173 	u16 eeprom_size;
174 	u16 max_event_log_size;
175 
176 	u8 pll_cfg:1, /* for iwl_pcie_apm_init() */
177 	   shadow_ram_support:1,
178 	   shadow_reg_enable:1,
179 	   pcie_l1_allowed:1,
180 	   apmg_wake_up_wa:1,
181 	   scd_chain_ext_wa:1;
182 
183 	u8 num_of_queues;	/* def: HW dependent */
184 
185 	u8 max_ll_items;
186 	u8 led_compensation;
187 };
188 
189 /*
190  * @stbc: support Tx STBC and 1*SS Rx STBC
191  * @ldpc: support Tx/Rx with LDPC
192  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
193  * @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40
194  */
195 struct iwl_ht_params {
196 	u8 ht_greenfield_support:1,
197 	   stbc:1,
198 	   ldpc:1,
199 	   use_rts_for_aggregation:1;
200 	u8 ht40_bands;
201 };
202 
203 /*
204  * Tx-backoff threshold
205  * @temperature: The threshold in Celsius
206  * @backoff: The tx-backoff in uSec
207  */
208 struct iwl_tt_tx_backoff {
209 	s32 temperature;
210 	u32 backoff;
211 };
212 
213 #define TT_TX_BACKOFF_SIZE 6
214 
215 /**
216  * struct iwl_tt_params - thermal throttling parameters
217  * @ct_kill_entry: CT Kill entry threshold
218  * @ct_kill_exit: CT Kill exit threshold
219  * @ct_kill_duration: The time  intervals (in uSec) in which the driver needs
220  *	to checks whether to exit CT Kill.
221  * @dynamic_smps_entry: Dynamic SMPS entry threshold
222  * @dynamic_smps_exit: Dynamic SMPS exit threshold
223  * @tx_protection_entry: TX protection entry threshold
224  * @tx_protection_exit: TX protection exit threshold
225  * @tx_backoff: Array of thresholds for tx-backoff , in ascending order.
226  * @support_ct_kill: Support CT Kill?
227  * @support_dynamic_smps: Support dynamic SMPS?
228  * @support_tx_protection: Support tx protection?
229  * @support_tx_backoff: Support tx-backoff?
230  */
231 struct iwl_tt_params {
232 	u32 ct_kill_entry;
233 	u32 ct_kill_exit;
234 	u32 ct_kill_duration;
235 	u32 dynamic_smps_entry;
236 	u32 dynamic_smps_exit;
237 	u32 tx_protection_entry;
238 	u32 tx_protection_exit;
239 	struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE];
240 	u8 support_ct_kill:1,
241 	   support_dynamic_smps:1,
242 	   support_tx_protection:1,
243 	   support_tx_backoff:1;
244 };
245 
246 /*
247  * information on how to parse the EEPROM
248  */
249 #define EEPROM_REG_BAND_1_CHANNELS		0x08
250 #define EEPROM_REG_BAND_2_CHANNELS		0x26
251 #define EEPROM_REG_BAND_3_CHANNELS		0x42
252 #define EEPROM_REG_BAND_4_CHANNELS		0x5C
253 #define EEPROM_REG_BAND_5_CHANNELS		0x74
254 #define EEPROM_REG_BAND_24_HT40_CHANNELS	0x82
255 #define EEPROM_REG_BAND_52_HT40_CHANNELS	0x92
256 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS	0x80
257 #define EEPROM_REGULATORY_BAND_NO_HT40		0
258 
259 /* lower blocks contain EEPROM image and calibration data */
260 #define OTP_LOW_IMAGE_SIZE		(2 * 512 * sizeof(u16)) /* 2 KB */
261 #define OTP_LOW_IMAGE_SIZE_FAMILY_7000	(16 * 512 * sizeof(u16)) /* 16 KB */
262 #define OTP_LOW_IMAGE_SIZE_FAMILY_8000	(32 * 512 * sizeof(u16)) /* 32 KB */
263 #define OTP_LOW_IMAGE_SIZE_FAMILY_9000	OTP_LOW_IMAGE_SIZE_FAMILY_8000
264 #define OTP_LOW_IMAGE_SIZE_FAMILY_A000	OTP_LOW_IMAGE_SIZE_FAMILY_9000
265 
266 struct iwl_eeprom_params {
267 	const u8 regulatory_bands[7];
268 	bool enhanced_txpower;
269 };
270 
271 /* Tx-backoff power threshold
272  * @pwr: The power limit in mw
273  * @backoff: The tx-backoff in uSec
274  */
275 struct iwl_pwr_tx_backoff {
276 	u32 pwr;
277 	u32 backoff;
278 };
279 
280 /**
281  * struct iwl_cfg
282  * @name: Official name of the device
283  * @fw_name_pre: Firmware filename prefix. The api version and extension
284  *	(.ucode) will be added to filename before loading from disk. The
285  *	filename is constructed as fw_name_pre<api>.ucode.
286  * @ucode_api_max: Highest version of uCode API supported by driver.
287  * @ucode_api_min: Lowest version of uCode API supported by driver.
288  * @max_inst_size: The maximal length of the fw inst section
289  * @max_data_size: The maximal length of the fw data section
290  * @valid_tx_ant: valid transmit antenna
291  * @valid_rx_ant: valid receive antenna
292  * @non_shared_ant: the antenna that is for WiFi only
293  * @nvm_ver: NVM version
294  * @nvm_calib_ver: NVM calibration version
295  * @lib: pointer to the lib ops
296  * @base_params: pointer to basic parameters
297  * @ht_params: point to ht parameters
298  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
299  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
300  * @internal_wimax_coex: internal wifi/wimax combo device
301  * @high_temp: Is this NIC is designated to be in high temperature.
302  * @host_interrupt_operation_mode: device needs host interrupt operation
303  *	mode set
304  * @nvm_hw_section_num: the ID of the HW NVM section
305  * @mac_addr_from_csr: read HW address from CSR registers
306  * @features: hw features, any combination of feature_whitelist
307  * @pwr_tx_backoffs: translation table between power limits and backoffs
308  * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response
309  * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response
310  * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the
311  *	station can receive in HT
312  * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the
313  *	station can receive in VHT
314  * @dccm_offset: offset from which DCCM begins
315  * @dccm_len: length of DCCM (including runtime stack CCM)
316  * @dccm2_offset: offset from which the second DCCM begins
317  * @dccm2_len: length of the second DCCM
318  * @smem_offset: offset from which the SMEM begins
319  * @smem_len: the length of SMEM
320  * @mq_rx_supported: multi-queue rx support
321  * @vht_mu_mimo_supported: VHT MU-MIMO support
322  * @rf_id: need to read rf_id to determine the firmware image
323  * @integrated: discrete or integrated
324  *
325  * We enable the driver to be backward compatible wrt. hardware features.
326  * API differences in uCode shouldn't be handled here but through TLVs
327  * and/or the uCode API version instead.
328  */
329 struct iwl_cfg {
330 	/* params specific to an individual device within a device family */
331 	const char *name;
332 	const char *fw_name_pre;
333 	/* params not likely to change within a device family */
334 	const struct iwl_base_params *base_params;
335 	/* params likely to change within a device family */
336 	const struct iwl_ht_params *ht_params;
337 	const struct iwl_eeprom_params *eeprom_params;
338 	const struct iwl_pwr_tx_backoff *pwr_tx_backoffs;
339 	const char *default_nvm_file_B_step;
340 	const char *default_nvm_file_C_step;
341 	const struct iwl_tt_params *thermal_params;
342 	enum iwl_device_family device_family;
343 	enum iwl_led_mode led_mode;
344 	u32 max_data_size;
345 	u32 max_inst_size;
346 	netdev_features_t features;
347 	u32 dccm_offset;
348 	u32 dccm_len;
349 	u32 dccm2_offset;
350 	u32 dccm2_len;
351 	u32 smem_offset;
352 	u32 smem_len;
353 	u16 nvm_ver;
354 	u16 nvm_calib_ver;
355 	u16 rx_with_siso_diversity:1,
356 	    bt_shared_single_ant:1,
357 	    internal_wimax_coex:1,
358 	    host_interrupt_operation_mode:1,
359 	    high_temp:1,
360 	    mac_addr_from_csr:1,
361 	    lp_xtal_workaround:1,
362 	    disable_dummy_notification:1,
363 	    apmg_not_supported:1,
364 	    mq_rx_supported:1,
365 	    vht_mu_mimo_supported:1,
366 	    rf_id:1,
367 	    integrated:1,
368 	    use_tfh:1;
369 	u8 valid_tx_ant;
370 	u8 valid_rx_ant;
371 	u8 non_shared_ant;
372 	u8 nvm_hw_section_num;
373 	u8 max_rx_agg_size;
374 	u8 max_tx_agg_size;
375 	u8 max_ht_ampdu_exponent;
376 	u8 max_vht_ampdu_exponent;
377 	u8 ucode_api_max;
378 	u8 ucode_api_min;
379 };
380 
381 /*
382  * This list declares the config structures for all devices.
383  */
384 #if IS_ENABLED(CONFIG_IWLDVM)
385 extern const struct iwl_cfg iwl5300_agn_cfg;
386 extern const struct iwl_cfg iwl5100_agn_cfg;
387 extern const struct iwl_cfg iwl5350_agn_cfg;
388 extern const struct iwl_cfg iwl5100_bgn_cfg;
389 extern const struct iwl_cfg iwl5100_abg_cfg;
390 extern const struct iwl_cfg iwl5150_agn_cfg;
391 extern const struct iwl_cfg iwl5150_abg_cfg;
392 extern const struct iwl_cfg iwl6005_2agn_cfg;
393 extern const struct iwl_cfg iwl6005_2abg_cfg;
394 extern const struct iwl_cfg iwl6005_2bg_cfg;
395 extern const struct iwl_cfg iwl6005_2agn_sff_cfg;
396 extern const struct iwl_cfg iwl6005_2agn_d_cfg;
397 extern const struct iwl_cfg iwl6005_2agn_mow1_cfg;
398 extern const struct iwl_cfg iwl6005_2agn_mow2_cfg;
399 extern const struct iwl_cfg iwl1030_bgn_cfg;
400 extern const struct iwl_cfg iwl1030_bg_cfg;
401 extern const struct iwl_cfg iwl6030_2agn_cfg;
402 extern const struct iwl_cfg iwl6030_2abg_cfg;
403 extern const struct iwl_cfg iwl6030_2bgn_cfg;
404 extern const struct iwl_cfg iwl6030_2bg_cfg;
405 extern const struct iwl_cfg iwl6000i_2agn_cfg;
406 extern const struct iwl_cfg iwl6000i_2abg_cfg;
407 extern const struct iwl_cfg iwl6000i_2bg_cfg;
408 extern const struct iwl_cfg iwl6000_3agn_cfg;
409 extern const struct iwl_cfg iwl6050_2agn_cfg;
410 extern const struct iwl_cfg iwl6050_2abg_cfg;
411 extern const struct iwl_cfg iwl6150_bgn_cfg;
412 extern const struct iwl_cfg iwl6150_bg_cfg;
413 extern const struct iwl_cfg iwl1000_bgn_cfg;
414 extern const struct iwl_cfg iwl1000_bg_cfg;
415 extern const struct iwl_cfg iwl100_bgn_cfg;
416 extern const struct iwl_cfg iwl100_bg_cfg;
417 extern const struct iwl_cfg iwl130_bgn_cfg;
418 extern const struct iwl_cfg iwl130_bg_cfg;
419 extern const struct iwl_cfg iwl2000_2bgn_cfg;
420 extern const struct iwl_cfg iwl2000_2bgn_d_cfg;
421 extern const struct iwl_cfg iwl2030_2bgn_cfg;
422 extern const struct iwl_cfg iwl6035_2agn_cfg;
423 extern const struct iwl_cfg iwl6035_2agn_sff_cfg;
424 extern const struct iwl_cfg iwl105_bgn_cfg;
425 extern const struct iwl_cfg iwl105_bgn_d_cfg;
426 extern const struct iwl_cfg iwl135_bgn_cfg;
427 #endif /* CONFIG_IWLDVM */
428 #if IS_ENABLED(CONFIG_IWLMVM)
429 extern const struct iwl_cfg iwl7260_2ac_cfg;
430 extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp;
431 extern const struct iwl_cfg iwl7260_2n_cfg;
432 extern const struct iwl_cfg iwl7260_n_cfg;
433 extern const struct iwl_cfg iwl3160_2ac_cfg;
434 extern const struct iwl_cfg iwl3160_2n_cfg;
435 extern const struct iwl_cfg iwl3160_n_cfg;
436 extern const struct iwl_cfg iwl3165_2ac_cfg;
437 extern const struct iwl_cfg iwl3168_2ac_cfg;
438 extern const struct iwl_cfg iwl7265_2ac_cfg;
439 extern const struct iwl_cfg iwl7265_2n_cfg;
440 extern const struct iwl_cfg iwl7265_n_cfg;
441 extern const struct iwl_cfg iwl7265d_2ac_cfg;
442 extern const struct iwl_cfg iwl7265d_2n_cfg;
443 extern const struct iwl_cfg iwl7265d_n_cfg;
444 extern const struct iwl_cfg iwl8260_2n_cfg;
445 extern const struct iwl_cfg iwl8260_2ac_cfg;
446 extern const struct iwl_cfg iwl8265_2ac_cfg;
447 extern const struct iwl_cfg iwl8275_2ac_cfg;
448 extern const struct iwl_cfg iwl4165_2ac_cfg;
449 extern const struct iwl_cfg iwl8260_2ac_sdio_cfg;
450 extern const struct iwl_cfg iwl8265_2ac_sdio_cfg;
451 extern const struct iwl_cfg iwl4165_2ac_sdio_cfg;
452 extern const struct iwl_cfg iwl9000lc_2ac_cfg;
453 extern const struct iwl_cfg iwl9160_2ac_cfg;
454 extern const struct iwl_cfg iwl9260_2ac_cfg;
455 extern const struct iwl_cfg iwl9270_2ac_cfg;
456 extern const struct iwl_cfg iwl9460_2ac_cfg;
457 extern const struct iwl_cfg iwl9560_2ac_cfg;
458 extern const struct iwl_cfg iwla000_2ac_cfg;
459 #endif /* CONFIG_IWLMVM */
460 
461 #endif /* __IWL_CONFIG_H__ */
462