1 /*
2 * Driver for the po1030 sensor
3 *
4 * Copyright (c) 2008 Erik Andrén
5 * Copyright (c) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
6 * Copyright (c) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
7 *
8 * Portions of code to USB interface and ALi driver software,
9 * Copyright (c) 2006 Willem Duinker
10 * v4l2 interface modeled after the V4L2 driver
11 * for SN9C10x PC Camera Controllers
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License as
15 * published by the Free Software Foundation, version 2.
16 *
17 */
18
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20
21 #include "m5602_po1030.h"
22
23 static int po1030_s_ctrl(struct v4l2_ctrl *ctrl);
24 static void po1030_dump_registers(struct sd *sd);
25
26 static const unsigned char preinit_po1030[][3] = {
27 {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
28 {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
29 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
30 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
31 {BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
32 {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
33 {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
34 {BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
35 {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
36 {BRIDGE, M5602_XB_GPIO_DAT, 0x04},
37 {BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
38 {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
39 {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
40
41 {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
42
43 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
44 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
45 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
46 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
47 {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
48 {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
49 {BRIDGE, M5602_XB_GPIO_DAT, 0x00}
50 };
51
52 static const unsigned char init_po1030[][3] = {
53 {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02},
54 {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0},
55 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
56 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
57 {BRIDGE, M5602_XB_ADC_CTRL, 0xc0},
58 {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00},
59 {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c},
60
61 {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)},
62
63 {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
64 {BRIDGE, M5602_XB_GPIO_DAT, 0x04},
65 {BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
66 {BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
67 {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06},
68 {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02},
69 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04},
70 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
71 {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
72 {BRIDGE, M5602_XB_GPIO_DAT, 0x00},
73
74 {SENSOR, PO1030_AUTOCTRL2, 0x04},
75
76 {SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER},
77 {SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X},
78
79 {SENSOR, PO1030_CONTROL2, 0x03},
80 {SENSOR, 0x21, 0x90},
81 {SENSOR, PO1030_YTARGET, 0x60},
82 {SENSOR, 0x59, 0x13},
83 {SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE},
84 {SENSOR, PO1030_EDGE_ENH_OFF, 0x00},
85 {SENSOR, PO1030_EGA, 0x80},
86 {SENSOR, 0x78, 0x14},
87 {SENSOR, 0x6f, 0x01},
88 {SENSOR, PO1030_GLOBALGAINMAX, 0x14},
89 {SENSOR, PO1030_Cb_U_GAIN, 0x38},
90 {SENSOR, PO1030_Cr_V_GAIN, 0x38},
91 {SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE |
92 PO1030_AUTO_SUBSAMPLING |
93 PO1030_FRAME_EQUAL},
94 {SENSOR, PO1030_GC0, 0x10},
95 {SENSOR, PO1030_GC1, 0x20},
96 {SENSOR, PO1030_GC2, 0x40},
97 {SENSOR, PO1030_GC3, 0x60},
98 {SENSOR, PO1030_GC4, 0x80},
99 {SENSOR, PO1030_GC5, 0xa0},
100 {SENSOR, PO1030_GC6, 0xc0},
101 {SENSOR, PO1030_GC7, 0xff},
102
103 /* Set the width to 751 */
104 {SENSOR, PO1030_FRAMEWIDTH_H, 0x02},
105 {SENSOR, PO1030_FRAMEWIDTH_L, 0xef},
106
107 /* Set the height to 540 */
108 {SENSOR, PO1030_FRAMEHEIGHT_H, 0x02},
109 {SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c},
110
111 /* Set the x window to 1 */
112 {SENSOR, PO1030_WINDOWX_H, 0x00},
113 {SENSOR, PO1030_WINDOWX_L, 0x01},
114
115 /* Set the y window to 1 */
116 {SENSOR, PO1030_WINDOWY_H, 0x00},
117 {SENSOR, PO1030_WINDOWY_L, 0x01},
118
119 /* with a very low lighted environment increase the exposure but
120 * decrease the FPS (Frame Per Second) */
121 {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00},
122 {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0},
123
124 {BRIDGE, M5602_XB_GPIO_DIR, 0x05},
125 {BRIDGE, M5602_XB_GPIO_DAT, 0x00},
126 {BRIDGE, M5602_XB_GPIO_EN_H, 0x06},
127 {BRIDGE, M5602_XB_GPIO_EN_L, 0x00},
128 };
129
130 static struct v4l2_pix_format po1030_modes[] = {
131 {
132 640,
133 480,
134 V4L2_PIX_FMT_SBGGR8,
135 V4L2_FIELD_NONE,
136 .sizeimage = 640 * 480,
137 .bytesperline = 640,
138 .colorspace = V4L2_COLORSPACE_SRGB,
139 .priv = 2
140 }
141 };
142
143 static const struct v4l2_ctrl_ops po1030_ctrl_ops = {
144 .s_ctrl = po1030_s_ctrl,
145 };
146
147 static const struct v4l2_ctrl_config po1030_greenbal_cfg = {
148 .ops = &po1030_ctrl_ops,
149 .id = M5602_V4L2_CID_GREEN_BALANCE,
150 .name = "Green Balance",
151 .type = V4L2_CTRL_TYPE_INTEGER,
152 .min = 0,
153 .max = 255,
154 .step = 1,
155 .def = PO1030_GREEN_GAIN_DEFAULT,
156 .flags = V4L2_CTRL_FLAG_SLIDER,
157 };
158
po1030_probe(struct sd * sd)159 int po1030_probe(struct sd *sd)
160 {
161 u8 dev_id_h = 0, i;
162 struct gspca_dev *gspca_dev = (struct gspca_dev *)sd;
163
164 if (force_sensor) {
165 if (force_sensor == PO1030_SENSOR) {
166 pr_info("Forcing a %s sensor\n", po1030.name);
167 goto sensor_found;
168 }
169 /* If we want to force another sensor, don't try to probe this
170 * one */
171 return -ENODEV;
172 }
173
174 PDEBUG(D_PROBE, "Probing for a po1030 sensor");
175
176 /* Run the pre-init to actually probe the unit */
177 for (i = 0; i < ARRAY_SIZE(preinit_po1030); i++) {
178 u8 data = preinit_po1030[i][2];
179 if (preinit_po1030[i][0] == SENSOR)
180 m5602_write_sensor(sd,
181 preinit_po1030[i][1], &data, 1);
182 else
183 m5602_write_bridge(sd, preinit_po1030[i][1], data);
184 }
185
186 if (m5602_read_sensor(sd, PO1030_DEVID_H, &dev_id_h, 1))
187 return -ENODEV;
188
189 if (dev_id_h == 0x30) {
190 pr_info("Detected a po1030 sensor\n");
191 goto sensor_found;
192 }
193 return -ENODEV;
194
195 sensor_found:
196 sd->gspca_dev.cam.cam_mode = po1030_modes;
197 sd->gspca_dev.cam.nmodes = ARRAY_SIZE(po1030_modes);
198
199 return 0;
200 }
201
po1030_init(struct sd * sd)202 int po1030_init(struct sd *sd)
203 {
204 int i, err = 0;
205
206 /* Init the sensor */
207 for (i = 0; i < ARRAY_SIZE(init_po1030) && !err; i++) {
208 u8 data[2] = {0x00, 0x00};
209
210 switch (init_po1030[i][0]) {
211 case BRIDGE:
212 err = m5602_write_bridge(sd,
213 init_po1030[i][1],
214 init_po1030[i][2]);
215 break;
216
217 case SENSOR:
218 data[0] = init_po1030[i][2];
219 err = m5602_write_sensor(sd,
220 init_po1030[i][1], data, 1);
221 break;
222
223 default:
224 pr_info("Invalid stream command, exiting init\n");
225 return -EINVAL;
226 }
227 }
228 if (err < 0)
229 return err;
230
231 if (dump_sensor)
232 po1030_dump_registers(sd);
233
234 return 0;
235 }
236
po1030_init_controls(struct sd * sd)237 int po1030_init_controls(struct sd *sd)
238 {
239 struct v4l2_ctrl_handler *hdl = &sd->gspca_dev.ctrl_handler;
240
241 sd->gspca_dev.vdev.ctrl_handler = hdl;
242 v4l2_ctrl_handler_init(hdl, 9);
243
244 sd->auto_white_bal = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops,
245 V4L2_CID_AUTO_WHITE_BALANCE,
246 0, 1, 1, 0);
247 sd->green_bal = v4l2_ctrl_new_custom(hdl, &po1030_greenbal_cfg, NULL);
248 sd->red_bal = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops,
249 V4L2_CID_RED_BALANCE, 0, 255, 1,
250 PO1030_RED_GAIN_DEFAULT);
251 sd->blue_bal = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops,
252 V4L2_CID_BLUE_BALANCE, 0, 255, 1,
253 PO1030_BLUE_GAIN_DEFAULT);
254
255 sd->autoexpo = v4l2_ctrl_new_std_menu(hdl, &po1030_ctrl_ops,
256 V4L2_CID_EXPOSURE_AUTO, 1, 0, V4L2_EXPOSURE_MANUAL);
257 sd->expo = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops, V4L2_CID_EXPOSURE,
258 0, 0x2ff, 1, PO1030_EXPOSURE_DEFAULT);
259
260 sd->gain = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops, V4L2_CID_GAIN, 0,
261 0x4f, 1, PO1030_GLOBAL_GAIN_DEFAULT);
262
263 sd->hflip = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops, V4L2_CID_HFLIP,
264 0, 1, 1, 0);
265 sd->vflip = v4l2_ctrl_new_std(hdl, &po1030_ctrl_ops, V4L2_CID_VFLIP,
266 0, 1, 1, 0);
267
268 if (hdl->error) {
269 pr_err("Could not initialize controls\n");
270 return hdl->error;
271 }
272
273 v4l2_ctrl_auto_cluster(4, &sd->auto_white_bal, 0, false);
274 v4l2_ctrl_auto_cluster(2, &sd->autoexpo, 0, false);
275 v4l2_ctrl_cluster(2, &sd->hflip);
276
277 return 0;
278 }
279
po1030_start(struct sd * sd)280 int po1030_start(struct sd *sd)
281 {
282 struct cam *cam = &sd->gspca_dev.cam;
283 int i, err = 0;
284 int width = cam->cam_mode[sd->gspca_dev.curr_mode].width;
285 int height = cam->cam_mode[sd->gspca_dev.curr_mode].height;
286 int ver_offs = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
287 u8 data;
288
289 switch (width) {
290 case 320:
291 data = PO1030_SUBSAMPLING;
292 err = m5602_write_sensor(sd, PO1030_CONTROL3, &data, 1);
293 if (err < 0)
294 return err;
295
296 data = ((width + 3) >> 8) & 0xff;
297 err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_H, &data, 1);
298 if (err < 0)
299 return err;
300
301 data = (width + 3) & 0xff;
302 err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_L, &data, 1);
303 if (err < 0)
304 return err;
305
306 data = ((height + 1) >> 8) & 0xff;
307 err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_H, &data, 1);
308 if (err < 0)
309 return err;
310
311 data = (height + 1) & 0xff;
312 err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_L, &data, 1);
313
314 height += 6;
315 width -= 1;
316 break;
317
318 case 640:
319 data = 0;
320 err = m5602_write_sensor(sd, PO1030_CONTROL3, &data, 1);
321 if (err < 0)
322 return err;
323
324 data = ((width + 7) >> 8) & 0xff;
325 err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_H, &data, 1);
326 if (err < 0)
327 return err;
328
329 data = (width + 7) & 0xff;
330 err = m5602_write_sensor(sd, PO1030_WINDOWWIDTH_L, &data, 1);
331 if (err < 0)
332 return err;
333
334 data = ((height + 3) >> 8) & 0xff;
335 err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_H, &data, 1);
336 if (err < 0)
337 return err;
338
339 data = (height + 3) & 0xff;
340 err = m5602_write_sensor(sd, PO1030_WINDOWHEIGHT_L, &data, 1);
341
342 height += 12;
343 width -= 2;
344 break;
345 }
346 err = m5602_write_bridge(sd, M5602_XB_SENSOR_TYPE, 0x0c);
347 if (err < 0)
348 return err;
349
350 err = m5602_write_bridge(sd, M5602_XB_LINE_OF_FRAME_H, 0x81);
351 if (err < 0)
352 return err;
353
354 err = m5602_write_bridge(sd, M5602_XB_PIX_OF_LINE_H, 0x82);
355 if (err < 0)
356 return err;
357
358 err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0x01);
359 if (err < 0)
360 return err;
361
362 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA,
363 ((ver_offs >> 8) & 0xff));
364 if (err < 0)
365 return err;
366
367 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (ver_offs & 0xff));
368 if (err < 0)
369 return err;
370
371 for (i = 0; i < 2 && !err; i++)
372 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, 0);
373 if (err < 0)
374 return err;
375
376 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height >> 8) & 0xff);
377 if (err < 0)
378 return err;
379
380 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, (height & 0xff));
381 if (err < 0)
382 return err;
383
384 for (i = 0; i < 2 && !err; i++)
385 err = m5602_write_bridge(sd, M5602_XB_VSYNC_PARA, 0);
386
387 for (i = 0; i < 2 && !err; i++)
388 err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
389
390 for (i = 0; i < 2 && !err; i++)
391 err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, 0);
392 if (err < 0)
393 return err;
394
395 err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, (width >> 8) & 0xff);
396 if (err < 0)
397 return err;
398
399 err = m5602_write_bridge(sd, M5602_XB_HSYNC_PARA, (width & 0xff));
400 if (err < 0)
401 return err;
402
403 err = m5602_write_bridge(sd, M5602_XB_SIG_INI, 0);
404 return err;
405 }
406
po1030_set_exposure(struct gspca_dev * gspca_dev,__s32 val)407 static int po1030_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
408 {
409 struct sd *sd = (struct sd *) gspca_dev;
410 u8 i2c_data;
411 int err;
412
413 PDEBUG(D_CONF, "Set exposure to %d", val & 0xffff);
414
415 i2c_data = ((val & 0xff00) >> 8);
416 PDEBUG(D_CONF, "Set exposure to high byte to 0x%x",
417 i2c_data);
418
419 err = m5602_write_sensor(sd, PO1030_INTEGLINES_H,
420 &i2c_data, 1);
421 if (err < 0)
422 return err;
423
424 i2c_data = (val & 0xff);
425 PDEBUG(D_CONF, "Set exposure to low byte to 0x%x",
426 i2c_data);
427 err = m5602_write_sensor(sd, PO1030_INTEGLINES_M,
428 &i2c_data, 1);
429
430 return err;
431 }
432
po1030_set_gain(struct gspca_dev * gspca_dev,__s32 val)433 static int po1030_set_gain(struct gspca_dev *gspca_dev, __s32 val)
434 {
435 struct sd *sd = (struct sd *) gspca_dev;
436 u8 i2c_data;
437 int err;
438
439 i2c_data = val & 0xff;
440 PDEBUG(D_CONF, "Set global gain to %d", i2c_data);
441 err = m5602_write_sensor(sd, PO1030_GLOBALGAIN,
442 &i2c_data, 1);
443 return err;
444 }
445
po1030_set_hvflip(struct gspca_dev * gspca_dev)446 static int po1030_set_hvflip(struct gspca_dev *gspca_dev)
447 {
448 struct sd *sd = (struct sd *) gspca_dev;
449 u8 i2c_data;
450 int err;
451
452 PDEBUG(D_CONF, "Set hvflip %d %d", sd->hflip->val, sd->vflip->val);
453 err = m5602_read_sensor(sd, PO1030_CONTROL2, &i2c_data, 1);
454 if (err < 0)
455 return err;
456
457 i2c_data = (0x3f & i2c_data) | (sd->hflip->val << 7) |
458 (sd->vflip->val << 6);
459
460 err = m5602_write_sensor(sd, PO1030_CONTROL2,
461 &i2c_data, 1);
462
463 return err;
464 }
465
po1030_set_red_balance(struct gspca_dev * gspca_dev,__s32 val)466 static int po1030_set_red_balance(struct gspca_dev *gspca_dev, __s32 val)
467 {
468 struct sd *sd = (struct sd *) gspca_dev;
469 u8 i2c_data;
470 int err;
471
472 i2c_data = val & 0xff;
473 PDEBUG(D_CONF, "Set red gain to %d", i2c_data);
474 err = m5602_write_sensor(sd, PO1030_RED_GAIN,
475 &i2c_data, 1);
476 return err;
477 }
478
po1030_set_blue_balance(struct gspca_dev * gspca_dev,__s32 val)479 static int po1030_set_blue_balance(struct gspca_dev *gspca_dev, __s32 val)
480 {
481 struct sd *sd = (struct sd *) gspca_dev;
482 u8 i2c_data;
483 int err;
484
485 i2c_data = val & 0xff;
486 PDEBUG(D_CONF, "Set blue gain to %d", i2c_data);
487 err = m5602_write_sensor(sd, PO1030_BLUE_GAIN,
488 &i2c_data, 1);
489
490 return err;
491 }
492
po1030_set_green_balance(struct gspca_dev * gspca_dev,__s32 val)493 static int po1030_set_green_balance(struct gspca_dev *gspca_dev, __s32 val)
494 {
495 struct sd *sd = (struct sd *) gspca_dev;
496 u8 i2c_data;
497 int err;
498
499 i2c_data = val & 0xff;
500 PDEBUG(D_CONF, "Set green gain to %d", i2c_data);
501
502 err = m5602_write_sensor(sd, PO1030_GREEN_1_GAIN,
503 &i2c_data, 1);
504 if (err < 0)
505 return err;
506
507 return m5602_write_sensor(sd, PO1030_GREEN_2_GAIN,
508 &i2c_data, 1);
509 }
510
po1030_set_auto_white_balance(struct gspca_dev * gspca_dev,__s32 val)511 static int po1030_set_auto_white_balance(struct gspca_dev *gspca_dev,
512 __s32 val)
513 {
514 struct sd *sd = (struct sd *) gspca_dev;
515 u8 i2c_data;
516 int err;
517
518 err = m5602_read_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
519 if (err < 0)
520 return err;
521
522 PDEBUG(D_CONF, "Set auto white balance to %d", val);
523 i2c_data = (i2c_data & 0xfe) | (val & 0x01);
524 err = m5602_write_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
525 return err;
526 }
527
po1030_set_auto_exposure(struct gspca_dev * gspca_dev,__s32 val)528 static int po1030_set_auto_exposure(struct gspca_dev *gspca_dev,
529 __s32 val)
530 {
531 struct sd *sd = (struct sd *) gspca_dev;
532 u8 i2c_data;
533 int err;
534
535 err = m5602_read_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
536 if (err < 0)
537 return err;
538
539 PDEBUG(D_CONF, "Set auto exposure to %d", val);
540 val = (val == V4L2_EXPOSURE_AUTO);
541 i2c_data = (i2c_data & 0xfd) | ((val & 0x01) << 1);
542 return m5602_write_sensor(sd, PO1030_AUTOCTRL1, &i2c_data, 1);
543 }
544
po1030_disconnect(struct sd * sd)545 void po1030_disconnect(struct sd *sd)
546 {
547 sd->sensor = NULL;
548 }
549
po1030_s_ctrl(struct v4l2_ctrl * ctrl)550 static int po1030_s_ctrl(struct v4l2_ctrl *ctrl)
551 {
552 struct gspca_dev *gspca_dev =
553 container_of(ctrl->handler, struct gspca_dev, ctrl_handler);
554 struct sd *sd = (struct sd *) gspca_dev;
555 int err;
556
557 if (!gspca_dev->streaming)
558 return 0;
559
560 switch (ctrl->id) {
561 case V4L2_CID_AUTO_WHITE_BALANCE:
562 err = po1030_set_auto_white_balance(gspca_dev, ctrl->val);
563 if (err || ctrl->val)
564 return err;
565 err = po1030_set_green_balance(gspca_dev, sd->green_bal->val);
566 if (err)
567 return err;
568 err = po1030_set_red_balance(gspca_dev, sd->red_bal->val);
569 if (err)
570 return err;
571 err = po1030_set_blue_balance(gspca_dev, sd->blue_bal->val);
572 break;
573 case V4L2_CID_EXPOSURE_AUTO:
574 err = po1030_set_auto_exposure(gspca_dev, ctrl->val);
575 if (err || ctrl->val == V4L2_EXPOSURE_AUTO)
576 return err;
577 err = po1030_set_exposure(gspca_dev, sd->expo->val);
578 break;
579 case V4L2_CID_GAIN:
580 err = po1030_set_gain(gspca_dev, ctrl->val);
581 break;
582 case V4L2_CID_HFLIP:
583 err = po1030_set_hvflip(gspca_dev);
584 break;
585 default:
586 return -EINVAL;
587 }
588
589 return err;
590 }
591
po1030_dump_registers(struct sd * sd)592 static void po1030_dump_registers(struct sd *sd)
593 {
594 int address;
595 u8 value = 0;
596
597 pr_info("Dumping the po1030 sensor core registers\n");
598 for (address = 0; address < 0x7f; address++) {
599 m5602_read_sensor(sd, address, &value, 1);
600 pr_info("register 0x%x contains 0x%x\n", address, value);
601 }
602
603 pr_info("po1030 register state dump complete\n");
604
605 pr_info("Probing for which registers that are read/write\n");
606 for (address = 0; address < 0xff; address++) {
607 u8 old_value, ctrl_value;
608 u8 test_value[2] = {0xff, 0xff};
609
610 m5602_read_sensor(sd, address, &old_value, 1);
611 m5602_write_sensor(sd, address, test_value, 1);
612 m5602_read_sensor(sd, address, &ctrl_value, 1);
613
614 if (ctrl_value == test_value[0])
615 pr_info("register 0x%x is writeable\n", address);
616 else
617 pr_info("register 0x%x is read only\n", address);
618
619 /* Restore original value */
620 m5602_write_sensor(sd, address, &old_value, 1);
621 }
622 }
623