1 /*
2 * For the STS-Thompson TDA7432 audio processor chip
3 *
4 * Handles audio functions: volume, balance, tone, loudness
5 * This driver will not complain if used with any
6 * other i2c device with the same address.
7 *
8 * Muting and tone control by Jonathan Isom <jisom@ematic.com>
9 *
10 * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com>
11 * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
12 * This code is placed under the terms of the GNU General Public License
13 * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
14 * Which was based on tda8425.c by Greg Alexander (c) 1998
15 *
16 * OPTIONS:
17 * debug - set to 1 if you'd like to see debug messages
18 * set to 2 if you'd like to be inundated with debug messages
19 *
20 * loudness - set between 0 and 15 for varying degrees of loudness effect
21 *
22 * maxvol - set maximium volume to +20db (1), default is 0db(0)
23 */
24
25 #include <linux/module.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/string.h>
29 #include <linux/timer.h>
30 #include <linux/delay.h>
31 #include <linux/errno.h>
32 #include <linux/slab.h>
33 #include <linux/videodev2.h>
34 #include <linux/i2c.h>
35
36 #include <media/v4l2-device.h>
37 #include <media/v4l2-ioctl.h>
38 #include <media/v4l2-ctrls.h>
39 #include <media/i2c-addr.h>
40
41 #ifndef VIDEO_AUDIO_BALANCE
42 # define VIDEO_AUDIO_BALANCE 32
43 #endif
44
45 MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>");
46 MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip");
47 MODULE_LICENSE("GPL");
48
49 static int maxvol;
50 static int loudness; /* disable loudness by default */
51 static int debug; /* insmod parameter */
52 module_param(debug, int, S_IRUGO | S_IWUSR);
53 MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0).");
54 module_param(loudness, int, S_IRUGO);
55 MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0).");
56 module_param(maxvol, int, S_IRUGO | S_IWUSR);
57 MODULE_PARM_DESC(maxvol, "Set maximium volume to +20dB(0) else +0dB(1). Default is +20dB(0).");
58
59
60 /* Structure of address and subaddresses for the tda7432 */
61
62 struct tda7432 {
63 struct v4l2_subdev sd;
64 struct v4l2_ctrl_handler hdl;
65 struct {
66 /* bass/treble cluster */
67 struct v4l2_ctrl *bass;
68 struct v4l2_ctrl *treble;
69 };
70 struct {
71 /* mute/balance cluster */
72 struct v4l2_ctrl *mute;
73 struct v4l2_ctrl *balance;
74 };
75 };
76
to_state(struct v4l2_subdev * sd)77 static inline struct tda7432 *to_state(struct v4l2_subdev *sd)
78 {
79 return container_of(sd, struct tda7432, sd);
80 }
81
to_sd(struct v4l2_ctrl * ctrl)82 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
83 {
84 return &container_of(ctrl->handler, struct tda7432, hdl)->sd;
85 }
86
87 /* The TDA7432 is made by STS-Thompson
88 * http://www.st.com
89 * http://us.st.com/stonline/books/pdf/docs/4056.pdf
90 *
91 * TDA7432: I2C-bus controlled basic audio processor
92 *
93 * The TDA7432 controls basic audio functions like volume, balance,
94 * and tone control (including loudness). It also has four channel
95 * output (for front and rear). Since most vidcap cards probably
96 * don't have 4 channel output, this driver will set front & rear
97 * together (no independent control).
98 */
99
100 /* Subaddresses for TDA7432 */
101
102 #define TDA7432_IN 0x00 /* Input select */
103 #define TDA7432_VL 0x01 /* Volume */
104 #define TDA7432_TN 0x02 /* Bass, Treble (Tone) */
105 #define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */
106 #define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */
107 #define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */
108 #define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */
109 #define TDA7432_LD 0x07 /* Loudness */
110
111
112 /* Masks for bits in TDA7432 subaddresses */
113
114 /* Many of these not used - just for documentation */
115
116 /* Subaddress 0x00 - Input selection and bass control */
117
118 /* Bits 0,1,2 control input:
119 * 0x00 - Stereo input
120 * 0x02 - Mono input
121 * 0x03 - Mute (Using Attenuators Plays better with modules)
122 * Mono probably isn't used - I'm guessing only the stereo
123 * input is connected on most cards, so we'll set it to stereo.
124 *
125 * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut
126 * Bit 4 controls bass range: 0/1 is extended/standard bass range
127 *
128 * Highest 3 bits not used
129 */
130
131 #define TDA7432_STEREO_IN 0
132 #define TDA7432_MONO_IN 2 /* Probably won't be used */
133 #define TDA7432_BASS_SYM 1 << 3
134 #define TDA7432_BASS_NORM 1 << 4
135
136 /* Subaddress 0x01 - Volume */
137
138 /* Lower 7 bits control volume from -79dB to +32dB in 1dB steps
139 * Recommended maximum is +20 dB
140 *
141 * +32dB: 0x00
142 * +20dB: 0x0c
143 * 0dB: 0x20
144 * -79dB: 0x6f
145 *
146 * MSB (bit 7) controls loudness: 1/0 is loudness on/off
147 */
148
149 #define TDA7432_VOL_0DB 0x20
150 #define TDA7432_LD_ON 1 << 7
151
152
153 /* Subaddress 0x02 - Tone control */
154
155 /* Bits 0,1,2 control absolute treble gain from 0dB to 14dB
156 * 0x0 is 14dB, 0x7 is 0dB
157 *
158 * Bit 3 controls treble attenuation/gain (sign)
159 * 1 = gain (+)
160 * 0 = attenuation (-)
161 *
162 * Bits 4,5,6 control absolute bass gain from 0dB to 14dB
163 * (This is only true for normal base range, set in 0x00)
164 * 0x0 << 4 is 14dB, 0x7 is 0dB
165 *
166 * Bit 7 controls bass attenuation/gain (sign)
167 * 1 << 7 = gain (+)
168 * 0 << 7 = attenuation (-)
169 *
170 * Example:
171 * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble
172 */
173
174 #define TDA7432_TREBLE_0DB 0xf
175 #define TDA7432_TREBLE 7
176 #define TDA7432_TREBLE_GAIN 1 << 3
177 #define TDA7432_BASS_0DB 0xf
178 #define TDA7432_BASS 7 << 4
179 #define TDA7432_BASS_GAIN 1 << 7
180
181
182 /* Subaddress 0x03 - Left Front attenuation */
183 /* Subaddress 0x04 - Left Rear attenuation */
184 /* Subaddress 0x05 - Right Front attenuation */
185 /* Subaddress 0x06 - Right Rear attenuation */
186
187 /* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB
188 * in 1.5dB steps.
189 *
190 * 0x00 is 0dB
191 * 0x1f is -37.5dB
192 *
193 * Bit 5 mutes that channel when set (1 = mute, 0 = unmute)
194 * We'll use the mute on the input, though (above)
195 * Bits 6,7 unused
196 */
197
198 #define TDA7432_ATTEN_0DB 0x00
199 #define TDA7432_MUTE 0x1 << 5
200
201
202 /* Subaddress 0x07 - Loudness Control */
203
204 /* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps
205 * when bit 4 is NOT set
206 *
207 * 0x0 is 0dB
208 * 0xf is -15dB
209 *
210 * If bit 4 is set, then there is a flat attenuation according to
211 * the lower 4 bits, as above.
212 *
213 * Bits 5,6,7 unused
214 */
215
216
217
218 /* Begin code */
219
tda7432_write(struct v4l2_subdev * sd,int subaddr,int val)220 static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val)
221 {
222 struct i2c_client *client = v4l2_get_subdevdata(sd);
223 unsigned char buffer[2];
224
225 v4l2_dbg(2, debug, sd, "In tda7432_write\n");
226 v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
227 buffer[0] = subaddr;
228 buffer[1] = val;
229 if (2 != i2c_master_send(client, buffer, 2)) {
230 v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n",
231 subaddr, val);
232 return -1;
233 }
234 return 0;
235 }
236
tda7432_set(struct v4l2_subdev * sd)237 static int tda7432_set(struct v4l2_subdev *sd)
238 {
239 struct i2c_client *client = v4l2_get_subdevdata(sd);
240 unsigned char buf[16];
241
242 buf[0] = TDA7432_IN;
243 buf[1] = TDA7432_STEREO_IN | /* Main (stereo) input */
244 TDA7432_BASS_SYM | /* Symmetric bass cut */
245 TDA7432_BASS_NORM; /* Normal bass range */
246 buf[2] = 0x3b;
247 if (loudness) /* Turn loudness on? */
248 buf[2] |= TDA7432_LD_ON;
249 buf[3] = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4);
250 buf[4] = TDA7432_ATTEN_0DB;
251 buf[5] = TDA7432_ATTEN_0DB;
252 buf[6] = TDA7432_ATTEN_0DB;
253 buf[7] = TDA7432_ATTEN_0DB;
254 buf[8] = loudness;
255 if (9 != i2c_master_send(client, buf, 9)) {
256 v4l2_err(sd, "I/O error, trying tda7432_set\n");
257 return -1;
258 }
259
260 return 0;
261 }
262
tda7432_log_status(struct v4l2_subdev * sd)263 static int tda7432_log_status(struct v4l2_subdev *sd)
264 {
265 struct tda7432 *state = to_state(sd);
266
267 v4l2_ctrl_handler_log_status(&state->hdl, sd->name);
268 return 0;
269 }
270
tda7432_s_ctrl(struct v4l2_ctrl * ctrl)271 static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl)
272 {
273 struct v4l2_subdev *sd = to_sd(ctrl);
274 struct tda7432 *t = to_state(sd);
275 u8 bass, treble, volume;
276 u8 lf, lr, rf, rr;
277
278 switch (ctrl->id) {
279 case V4L2_CID_AUDIO_MUTE:
280 if (t->balance->val < 0) {
281 /* shifted to left, attenuate right */
282 rr = rf = -t->balance->val;
283 lr = lf = TDA7432_ATTEN_0DB;
284 } else if (t->balance->val > 0) {
285 /* shifted to right, attenuate left */
286 rr = rf = TDA7432_ATTEN_0DB;
287 lr = lf = t->balance->val;
288 } else {
289 /* centered */
290 rr = rf = TDA7432_ATTEN_0DB;
291 lr = lf = TDA7432_ATTEN_0DB;
292 }
293 if (t->mute->val) {
294 lf |= TDA7432_MUTE;
295 lr |= TDA7432_MUTE;
296 rf |= TDA7432_MUTE;
297 rr |= TDA7432_MUTE;
298 }
299 /* Mute & update balance*/
300 tda7432_write(sd, TDA7432_LF, lf);
301 tda7432_write(sd, TDA7432_LR, lr);
302 tda7432_write(sd, TDA7432_RF, rf);
303 tda7432_write(sd, TDA7432_RR, rr);
304 return 0;
305 case V4L2_CID_AUDIO_VOLUME:
306 volume = 0x6f - ctrl->val;
307 if (loudness) /* Turn on the loudness bit */
308 volume |= TDA7432_LD_ON;
309
310 tda7432_write(sd, TDA7432_VL, volume);
311 return 0;
312 case V4L2_CID_AUDIO_BASS:
313 bass = t->bass->val;
314 treble = t->treble->val;
315 if (bass >= 0x8)
316 bass = 14 - (bass - 8);
317 if (treble >= 0x8)
318 treble = 14 - (treble - 8);
319
320 tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble);
321 return 0;
322 }
323 return -EINVAL;
324 }
325
326 /* ----------------------------------------------------------------------- */
327
328 static const struct v4l2_ctrl_ops tda7432_ctrl_ops = {
329 .s_ctrl = tda7432_s_ctrl,
330 };
331
332 static const struct v4l2_subdev_core_ops tda7432_core_ops = {
333 .log_status = tda7432_log_status,
334 };
335
336 static const struct v4l2_subdev_ops tda7432_ops = {
337 .core = &tda7432_core_ops,
338 };
339
340 /* ----------------------------------------------------------------------- */
341
342 /* *********************** *
343 * i2c interface functions *
344 * *********************** */
345
tda7432_probe(struct i2c_client * client,const struct i2c_device_id * id)346 static int tda7432_probe(struct i2c_client *client,
347 const struct i2c_device_id *id)
348 {
349 struct tda7432 *t;
350 struct v4l2_subdev *sd;
351
352 v4l_info(client, "chip found @ 0x%02x (%s)\n",
353 client->addr << 1, client->adapter->name);
354
355 t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL);
356 if (!t)
357 return -ENOMEM;
358 sd = &t->sd;
359 v4l2_i2c_subdev_init(sd, client, &tda7432_ops);
360 v4l2_ctrl_handler_init(&t->hdl, 5);
361 v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
362 V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47);
363 t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
364 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
365 t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
366 V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0);
367 t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
368 V4L2_CID_AUDIO_BASS, 0, 14, 1, 7);
369 t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops,
370 V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7);
371 sd->ctrl_handler = &t->hdl;
372 if (t->hdl.error) {
373 int err = t->hdl.error;
374
375 v4l2_ctrl_handler_free(&t->hdl);
376 return err;
377 }
378 v4l2_ctrl_cluster(2, &t->bass);
379 v4l2_ctrl_cluster(2, &t->mute);
380 v4l2_ctrl_handler_setup(&t->hdl);
381 if (loudness < 0 || loudness > 15) {
382 v4l2_warn(sd, "loudness parameter must be between 0 and 15\n");
383 if (loudness < 0)
384 loudness = 0;
385 if (loudness > 15)
386 loudness = 15;
387 }
388
389 tda7432_set(sd);
390 return 0;
391 }
392
tda7432_remove(struct i2c_client * client)393 static int tda7432_remove(struct i2c_client *client)
394 {
395 struct v4l2_subdev *sd = i2c_get_clientdata(client);
396 struct tda7432 *t = to_state(sd);
397
398 tda7432_set(sd);
399 v4l2_device_unregister_subdev(sd);
400 v4l2_ctrl_handler_free(&t->hdl);
401 return 0;
402 }
403
404 static const struct i2c_device_id tda7432_id[] = {
405 { "tda7432", 0 },
406 { }
407 };
408 MODULE_DEVICE_TABLE(i2c, tda7432_id);
409
410 static struct i2c_driver tda7432_driver = {
411 .driver = {
412 .name = "tda7432",
413 },
414 .probe = tda7432_probe,
415 .remove = tda7432_remove,
416 .id_table = tda7432_id,
417 };
418
419 module_i2c_driver(tda7432_driver);
420