Lines Matching +full:buffer +full:- +full:enable

8 		PCIe form factor add-in Coprocessor card based on the Intel Many
26 		MIC device. For example - "x100"
34 		MIC device. For example - "A0" or "B0"
44 		"ready" - The MIC device is ready to boot the card OS. On
48 		"booting" - The MIC device has initiated booting a card OS.
49 		"online" - The MIC device has completed boot and is online
50 		"shutting_down" - The card OS is shutting down.
51 		"resetting" - A reset has been initiated for the MIC device
52 		"reset_failed" - The MIC device has failed to reset.
57 		"boot" - Boot the card OS image specified by the combination
60 		"reset" - Initiates device reset.
61 		"shutdown" - Initiates card OS shutdown.
72 		"nop" -  shutdown status is not applicable, when the card OS is
74 		"crashed" - Shutdown because of a HW or SW crash.
75 		"halted" - Shutdown because of a halt command.
76 		"poweroff" - Shutdown because of a poweroff command.
77 		"restart" - Shutdown because of a restart command.
87 		self-bootable machines. When read, this entry provides
123 		a) linux - Boot a Linux image.
124 		b) flash - Boot an image for flash updates.
133 		access the card OS log buffer via debugfs. When read, this entry
134 		provides the kernel virtual address of the buffer where the card
135 		OS log buffer can be read. This entry is written by the host
136 		configuration daemon to set the log buffer address. The correct
137 		log buffer address to be written can be found in the System.map
147 		access the card OS log buffer via debugfs. When read, this entry
148 		provides the kernel virtual address where the card OS log buffer
150 		daemon to set the log buffer length address. The correct log
151 		buffer length address to be written can be found in the
162 		notification by setting heartbeat_enable to 0 and enable it by