Lines Matching +full:phy +full:- +full:device

1 What:		/sys/class/mdio_bus/<bus>/<device>/attached_dev
6 		Symbolic link to the network device this PHY device is
9 What:		/sys/class/mdio_bus/<bus>/<device>/phy_has_fixups
14 		This attribute contains the boolean value whether a given PHY
15 		device has had any "fixup" workaround running on it, encoded as
17 		PHY configurations.
19 What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
24 		This attribute contains the 32-bit PHY Identifier as reported
25 		by the device during bus enumeration, encoded in hexadecimal.
26 		This ID is used to match the device with the appropriate
29 What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
34 		This attribute contains the PHY interface as configured by the
37 		appropriate mode for its data lines to the PHY hardware.
39 		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
40 		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
41 		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
42 		xaui, 10gbase-kr, unknown
44 What:		/sys/class/mdio_bus/<bus>/<device>/phy_standalone
49 		Boolean value indicating whether the PHY device is used in