Lines Matching +full:spi +full:- +full:cs +full:- +full:high
1 0 Unnamed devices (e.g. non-device mounts)
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
80 28 = /dev/fd?u1440 3.5" 1440K High Density(1)
81 124 = /dev/fd?u1600 3.5" 1600K High Density(1)
82 44 = /dev/fd?u1680 3.5" 1680K High Density(3)
83 60 = /dev/fd?u1722 3.5" 1722K High Density
84 76 = /dev/fd?u1743 3.5" 1743K High Density
85 96 = /dev/fd?u1760 3.5" 1760K High Density
86 116 = /dev/fd?u1840 3.5" 1840K High Density(3)
87 100 = /dev/fd?u1920 3.5" 1920K High Density(1)
97 (3) Autodetectable format in a High Density (1440K) drive only
101 5.25" Quad Density (q), 5.25" High Density (h) or 3.5"
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
126 For Linux/i386, partitions 1-4 are the primary
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
358 222 = /dev/mvista/hasi Montavista PICMG high availability
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
379 242-254 Reserved for local use
385 11 char Serial Mux device (Linux/PA-RISC only)
390 11 block SCSI CD-ROM devices
391 0 = /dev/scd0 First SCSI CD-ROM
392 1 = /dev/scd1 Second SCSI CD-ROM
397 12 char QIC-02 tape
398 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
399 3 = /dev/tpqic11 QIC-11, rewind-on-close
400 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
401 5 = /dev/tpqic24 QIC-24, rewind-on-close
402 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
403 7 = /dev/tpqic120 QIC-120, rewind-on-close
404 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
405 9 = /dev/tpqic150 QIC-150, rewind-on-close
407 The device names specified are proposed -- if there
434 4 = /dev/audio Sun-compatible digital audio
437 8 = /dev/sequencer2 Sequencer -- alternate device
456 15 block Sony CDU-31A/CDU-33A CD-ROM
457 0 = /dev/sonycd Sony CDU-31a CD-ROM
459 16 char Non-SCSI scanners
462 16 block GoldStar CD-ROM
463 0 = /dev/gscd GoldStar CD-ROM
469 17 block Optics Storage CD-ROM
470 0 = /dev/optcd Optics Storage CD-ROM
472 18 char OBSOLETE (was Chase serial card - alternate devices)
476 18 block Sanyo CD-ROM
477 0 = /dev/sjcd Sanyo CD-ROM
495 20 char Cyclades serial card - alternate devices
500 20 block Hitachi CD-ROM (under development)
501 0 = /dev/hitcd Hitachi CD-ROM
511 device-naming practice.
517 This device is used on the ARM-based Acorn RiscPC.
525 22 block Second IDE hard disk/CD-ROM interface
526 0 = /dev/hdc Master: whole disk (or CD-ROM)
527 64 = /dev/hdd Slave: whole disk (or CD-ROM)
532 23 char Digiboard serial card - alternate devices
536 23 block Mitsumi proprietary CD-ROM
537 0 = /dev/mcd Mitsumi CD-ROM
552 24 block Sony CDU-535 CD-ROM
553 0 = /dev/cdu535 Sony CDU-535 CD-ROM
555 25 char Stallion serial card - alternate devices
568 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
569 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
570 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
571 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
572 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
576 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
577 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
578 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
579 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
580 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
582 27 char QIC-117 tape
583 0 = /dev/qft0 Unit 0, rewind-on-close
584 1 = /dev/qft1 Unit 1, rewind-on-close
585 2 = /dev/qft2 Unit 2, rewind-on-close
586 3 = /dev/qft3 Unit 3, rewind-on-close
587 4 = /dev/nqft0 Unit 0, no rewind-on-close
588 5 = /dev/nqft1 Unit 1, no rewind-on-close
589 6 = /dev/nqft2 Unit 2, no rewind-on-close
590 7 = /dev/nqft3 Unit 3, no rewind-on-close
591 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
592 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
593 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
594 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
595 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
596 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
597 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
598 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
599 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
600 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
601 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
602 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
603 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
604 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
605 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
606 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
608 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
609 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
610 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
611 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
612 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
614 28 char Stallion serial card - card programming
624 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
625 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
626 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
627 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
628 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
647 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
648 0 = /dev/aztcd Aztech CD-ROM
650 30 char iBCS-2 compatibility devices
664 Additionally, iBCS-2 requires the following links:
666 /dev/ip -> /dev/inet/ip
667 /dev/icmp -> /dev/inet/icmp
668 /dev/ggp -> /dev/inet/ggp
669 /dev/ipip -> /dev/inet/ipip
670 /dev/tcp -> /dev/inet/tcp
671 /dev/egp -> /dev/inet/egp
672 /dev/pup -> /dev/inet/pup
673 /dev/udp -> /dev/inet/udp
674 /dev/idp -> /dev/inet/idp
675 /dev/rawip -> /dev/inet/rawip
676 /dev/inet/arp -> /dev/inet/udp
677 /dev/inet/rip -> /dev/inet/udp
678 /dev/nfsd -> /dev/socksys
679 /dev/X0R -> /dev/null (? apparently not required ?)
681 30 block Philips LMS CM-205 CD-ROM
682 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
685 driver does not work with the CM-205MS CD-ROM.
687 31 char MPU-401 MIDI
688 0 = /dev/mpu401data MPU-401 data port
689 1 = /dev/mpu401stat MPU-401 status port
705 The read-write (rw) devices support back-caching
707 devices. The read-only devices (ro) support reading
714 32 block Philips LMS CM-206 CD-ROM
715 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
717 33 char Specialix serial card - alternate devices
721 33 block Third IDE hard disk/CD-ROM interface
722 0 = /dev/hde Master: whole disk (or CD-ROM)
723 64 = /dev/hdf Slave: whole disk (or CD-ROM)
739 34 block Fourth IDE hard disk/CD-ROM interface
740 0 = /dev/hdg Master: whole disk (or CD-ROM)
741 64 = /dev/hdh Slave: whole disk (or CD-ROM)
777 128 = /dev/nht0 First IDE tape, no rewind-on-close
778 129 = /dev/nht1 Second IDE tape, no rewind-on-close
797 39 char ML-16P experimental I/O board
798 0 = /dev/ml16pa-a0 First card, first analog channel
799 1 = /dev/ml16pa-a1 First card, second analog channel
801 15 = /dev/ml16pa-a15 First card, 16th analog channel
802 16 = /dev/ml16pa-d First card, digital lines
803 17 = /dev/ml16pa-c0 First card, first counter/timer
804 18 = /dev/ml16pa-c1 First card, second counter/timer
805 19 = /dev/ml16pa-c2 First card, third counter/timer
806 32 = /dev/ml16pb-a0 Second card, first analog channel
807 33 = /dev/ml16pb-a1 Second card, second analog channel
809 47 = /dev/ml16pb-a15 Second card, 16th analog channel
810 48 = /dev/ml16pb-d Second card, digital lines
811 49 = /dev/ml16pb-c0 Second card, first counter/timer
812 50 = /dev/ml16pb-c1 Second card, second counter/timer
813 51 = /dev/ml16pb-c2 Second card, third counter/timer
858 44 char isdn4linux virtual modem - alternate devices
902 46 block Parallel port ATAPI CD-ROM devices
903 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
904 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
905 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
906 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
908 47 char Comtrol Rocketport serial card - alternate devices
937 49 char SDL RISCom serial card - alternate devices
957 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
1012 24-hour heart monitoring equipment.
1039 56 block Fifth IDE hard disk/CD-ROM interface
1040 0 = /dev/hdi Master: whole disk (or CD-ROM)
1041 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1051 57 block Sixth IDE hard disk/CD-ROM interface
1052 0 = /dev/hdk Master: whole disk (or CD-ROM)
1053 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1058 58 char Hayes ESP serial card - alternate devices
1079 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1081 60-63 char LOCAL/EXPERIMENTAL USE
1083 60-63 block LOCAL/EXPERIMENTAL USE
1127 65 block SCSI disk devices (16-31)
1143 66 block SCSI disk devices (32-47)
1157 See http://www.coda.cs.cmu.edu for information about Coda.
1159 67 block SCSI disk devices (48-63)
1180 68 block SCSI disk devices (64-79)
1194 69 block SCSI disk devices (80-95)
1214 70 block SCSI disk devices (96-111)
1243 71 block SCSI disk devices (112-127)
1254 72 char Computone IntelliPort II serial card - alternate devices
1282 73 char Computone IntelliPort II serial card - control devices
1307 Currently for Dolphin Interconnect Solutions' PCI-SCI
1337 76 char Specialix IO8+ serial card - alternate devices
1383 79 char PAM Software's multimodem boards - alternate devices
1519 87 char Sony Control-A1 stereo control bus
1539 88 block Seventh IDE hard disk/CD-ROM interface
1540 0 = /dev/hdm Master: whole disk (or CD-ROM)
1541 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1547 0 = /dev/i2c-0 First I2C adapter
1548 1 = /dev/i2c-1 Second I2C adapter
1551 89 block Eighth IDE hard disk/CD-ROM interface
1552 0 = /dev/hdo Master: whole disk (or CD-ROM)
1553 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1565 90 block Ninth IDE hard disk/CD-ROM interface
1566 0 = /dev/hdq Master: whole disk (or CD-ROM)
1567 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1572 91 char CAN-Bus devices
1573 0 = /dev/can0 First CAN-Bus controller
1574 1 = /dev/can1 Second CAN-Bus controller
1577 91 block Tenth IDE hard disk/CD-ROM interface
1578 0 = /dev/hds Master: whole disk (or CD-ROM)
1579 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1662 98 block User-mode virtual block device
1663 0 = /dev/ubda First user-mode block device
1664 16 = /dev/udbb Second user-mode block device
1671 This device is used by the user-mode virtual kernel port.
1725 write to <arla-drinkers@stacken.kth.se> or see
1743 105 char Comtrol VS-1000 serial controller
1744 0 = /dev/ttyV0 First VS-1000 port
1745 1 = /dev/ttyV1 Second VS-1000 port
1758 106 char Comtrol VS-1000 serial controller - alternate devices
1759 0 = /dev/cuv0 First VS-1000 port
1760 1 = /dev/cuv1 Second VS-1000 port
1843 There is currently a device-naming conflict between
1859 113 char ISI serial card - alternate devices
1864 113 block IBM iSeries virtual CD-ROM
1865 0 = /dev/iseries/vcda First virtual CD-ROM
1866 1 = /dev/iseries/vcdb Second virtual CD-ROM
1912 115 block NetWare (NWFS) Devices (0-255)
1955 The EVMS driver uses a layered, plug-in model to provide
1990 120-127 char LOCAL/EXPERIMENTAL USE
1992 120-127 block LOCAL/EXPERIMENTAL USE
1997 128-135 char Unix98 PTY masters
2003 128 block SCSI disk devices (128-143)
2014 129 block SCSI disk devices (144-159)
2027 130 block SCSI disk devices (160-175)
2038 131 block SCSI disk devices (176-191)
2049 132 block SCSI disk devices (192-207)
2060 133 block SCSI disk devices (208-223)
2071 134 block SCSI disk devices (224-239)
2082 135 block SCSI disk devices (240-255)
2093 136-143 char Unix98 PTY slaves
2094 0 = /dev/pts/0 First Unix98 pseudo-TTY
2095 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2176 The SST 5136-DN DeviceNet interface driver has been
2179 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2183 145 char SAM9407-based soundcard
2204 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2208 146 char SYSTRAM SCRAMNet mirrored-memory network
2213 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2232 149 char Technology Concepts serial card - alternate devices
2237 150 char Real-Time Linux FIFOs
2257 153 char SPI Bus Interface (sometimes referred to as MicroWire)
2258 0 = /dev/spi0 First SPI device on the bus
2259 1 = /dev/spi1 Second SPI device on the bus
2261 15 = /dev/spi15 Sixteenth SPI device on the bus
2284 155 char Specialix RIO serial card - alternate devices
2294 157 char Specialix RIO serial card - alternate devices
2313 160 block Carmel 8-port SATA Disks on First Controller
2336 161 block Carmel 8-port SATA Disks on Second Controller
2361 164 char Chase Research AT/PCI-Fast serial card
2362 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2364 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2365 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2367 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2368 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2370 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2371 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2373 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2375 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2385 167 char ACM USB modems - alternate devices
2396 0 = /dev/ecsa8-0 First CSA8000
2397 1 = /dev/ecsa8-1 Second CSA8000
2414 173 char Moxa Intellio serial card - alternate devices
2425 175 char SmartIO serial card - alternate devices
2463 179 char CCube DVXChip-based PCI products
2518 183 char SST 5136-DN DeviceNet interface
2531 185 char InterMezzo high availability file system
2537 http://inter-mezzo.org/index.html
2539 186 char Object-based storage control device
2556 189 char USB serial converters - alternate devices
2574 193 char Kernel event-tracing interface
2608 49 = /dev/tor/49 First pseudo-channel
2609 50 = /dev/tor/50 Second pseudo-channel
2657 202 char CPU model-specific registers
2678 204 char Low-density serial ports
2679 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2680 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2681 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2682 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2687 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2688 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2689 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2690 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2691 12 = /dev/ttyFW0 Firmware console - port 0
2692 13 = /dev/ttyFW1 Firmware console - port 1
2693 14 = /dev/ttyFW2 Firmware console - port 2
2694 15 = /dev/ttyFW3 Firmware console - port 3
2702 41 = /dev/ttySMX0 Motorola i.MX - port 0
2703 42 = /dev/ttySMX1 Motorola i.MX - port 1
2704 43 = /dev/ttySMX2 Motorola i.MX - port 2
2705 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2706 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2707 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2709 47 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2721 148 = /dev/ttyPSC0 PPC PSC - port 0
2723 153 = /dev/ttyPSC5 PPC PSC - port 5
2731 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2733 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2734 191 = /dev/xvc0 Xen virtual console - port 0
2735 192 = /dev/ttyPZ0 pmac_zilog - port 0
2737 195 = /dev/ttyPZ3 pmac_zilog - port 3
2750 205 char Low-density serial ports (alternate device)
2786 206 char OnStream SC-x0 tape devices
2812 The OnStream SC-x0 SCSI tapes do not support the
2815 maybe ParPort) versions may be driven via ide-scsi or
2816 usb-storage SCSI emulation and this osst device and
2817 driver as well. The ADR-x0 drives are QIC-157
2883 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2907 219 char The Logical Company DCI-1300 digital I/O card
2908 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2909 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2954 228 char IBM 3270 terminal block-mode access
3032 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3036 240-254 block LOCAL/EXPERIMENTAL USE
3051 ---LARGE MAJORS!!!!!---
3053 256 char Equinox SST multi-port serial boards
3079 258 block ROM/Flash read-only translation layer
3092 260 char OSD (Object-based-device) SCSI Device
3098 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3101 once the 234-254 range is full.