Lines Matching +full:wait +full:- +full:state

11   capability of the following: DMA_MEMCPY (memory-to-memory), DMA_MEMSET
12   (const-to-memory or memory-to-memory, when emulated), DMA_XOR, DMA_PQ.
18 Part 1 - How to build the test module
23 	Device Drivers -> DMA Engine support -> DMA Test client
28 Part 2 - When dmatest is built as a module
47 Example of multi-channel test usage (new in the 5.0 kernel)::
58   For all tests, starting in the 5.0 kernel, either single- or multi-channel,
70     % ls -1 /sys/class/dma/
78 The following command returns the state of the test. ::
82 To wait for test completion userpace can poll 'run' until it is false, or use
83 the wait parameter. Specifying 'wait=1' when loading the module causes module
85 /sys/module/dmatest/parameters/wait waits for any running test to complete
86 before returning. For example, the following scripts wait for 42 tests
92     % modprobe dmatest run=1 iterations=42 wait=1
93     % modprobe -r dmatest
98     % cat /sys/module/dmatest/parameters/wait
99     % modprobe -r dmatest
101 Part 3 - When built-in in the kernel
106 re-run with the same or different parameters. For the details see the above
107 section `Part 2 - When dmatest is built as a module`_.
110 case. You always could check them at run-time by running ::
112     % grep -H . /sys/module/dmatest/parameters/*
114 Part 4 - Gathering the test results
123     % dmesg | tail -n 1
124     dmatest: result dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
134     % dmesg | tail -n 1
135     dmatest: dma0chan0-copy0: summary 1 test, 0 failures 1000 iops 100000 KB/s (0)
140 Part 5 - Handling channel allocation
144 -------------------
206 -------------------