Lines Matching refs:connected

49 	hex "Parallel port where the LCD is connected"
53 	  The address of the parallel port where the LCD is connected.
172 	  Say Y here if you have an HD44780 or KS-0074 LCD connected to your
186 	  This is the index of the parallel port the panel is connected to. One
188 	  and LCD are connected to two separate ports, you have to start two
219 	  This enables and configures a keypad connected to the parallel port.
236 	   This enables and configures an LCD connected to the parallel port.
332         int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
337 	  signal has been connected. It can be :
339 	          0 : no connection (eg: connected to ground)
340 	      1..17 : directly connected to any of these pins on the DB25 plug
341 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
347         int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
352 	  signal has been connected. It can be :
354 	          0 : no connection (eg: connected to ground)
355 	      1..17 : directly connected to any of these pins on the DB25 plug
356 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
362         int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
367 	  signal has been connected. It can be :
369 	          0 : no connection (eg: connected to ground)
370 	      1..17 : directly connected to any of these pins on the DB25 plug
371 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
377         int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
382 	  LCD 'SCL' signal has been connected. It can be :
384 	          0 : no connection (eg: connected to ground)
385 	      1..17 : directly connected to any of these pins on the DB25 plug
386 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
392         int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
397 	  LCD 'SDA' signal has been connected. It can be :
399 	          0 : no connection (eg: connected to ground)
400 	      1..17 : directly connected to any of these pins on the DB25 plug
401 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).
407         int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
412           has been connected. It can be :
414 	          0 : no connection (eg: connected to ground)
415 	      1..17 : directly connected to any of these pins on the DB25 plug
416 	    -1..-17 : connected to the same pin through an inverter (eg: transistor).