Lines Matching refs:on
9 depends on HAS_IOMEM
24 depends on ARM_AMBA
34 bool "Support for console on AMBA serial port"
35 depends on SERIAL_AMBA_PL010=y
51 depends on ARM_AMBA
61 bool "Support for console on AMBA serial port"
62 depends on SERIAL_AMBA_PL011=y
79 depends on ARM64 || ARM
86 with "earlycon=smh" on the kernel command line. The console is
91 depends on RISCV
98 with "earlycon=sbi" on the kernel command line. The console is
102 tristate "BCM1xxx on-chip DUART serial support"
103 depends on SIBYTE_SB1xxx_SOC=y
110 is implemented. Depending on the SOC configuration there may be
117 bool "Support for console on a BCM1xxx DUART serial port"
118 depends on SERIAL_SB1250_DUART=y
130 bool "AT91 on-chip serial port support"
131 depends on ARCH_AT91 || COMPILE_TEST
136 This enables the driver for the on-chip UARTs of the Atmel
140 bool "Support for console on AT91 serial port"
141 depends on SERIAL_ATMEL=y
144 Say Y here if you wish to use an on-chip UART on a Atmel
150 bool "Support DMA transfers on AT91 serial port"
151 depends on SERIAL_ATMEL
166 depends on SERIAL_ATMEL=y
183 depends on KGDB_SERIAL_CONSOLE
202 depends on ARCH_MESON
205 This enables the driver for the on-chip UARTs of the Amlogic
209 bool "Support for console on meson"
210 depends on SERIAL_MESON=y
221 depends on ARCH_CLPS711X || COMPILE_TEST
225 This enables the driver for the on-chip UARTs of the Cirrus
229 bool "Support for console on CLPS711X serial port"
230 depends on SERIAL_CLPS711X=y
240 depends on PLAT_SAMSUNG || ARCH_EXYNOS
243 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
245 provide all of these ports, depending on how the serial port
250 depends on SERIAL_SAMSUNG
257 depends on SERIAL_SAMSUNG
266 depends on SERIAL_SAMSUNG && DEBUG_LL
274 bool "Support for console on Samsung SoC serial port"
275 depends on SERIAL_SAMSUNG=y
279 Allow selection of the S3C24XX on-board serial ports for use as
291 depends on ARCH_SIRF
294 Support for the on-chip UART on the CSR SiRFprimaII series,
296 provide all of these ports, depending on how the serial port
300 bool "Support for console on SiRF SoC serial port"
301 depends on SERIAL_SIRFSOC=y
313 depends on ARCH_TEGRA && TEGRA20_APB_DMA
316 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
318 provide all of these ports, depending on how the serial port
324 depends on ARCH_TEGRA && TEGRA_HSP_MBOX
332 bool "Support for console on a Tegra TCU serial port"
333 depends on SERIAL_TEGRA_TCU=y
346 depends on SPI
353 depends on SPI_MASTER
366 depends on MACH_DECSTATION && 32BIT
374 bool "Support console on DECstation DZ serial driver"
375 depends on SERIAL_DZ=y
384 Note that the firmware uses ttyS3 as the serial console on
391 depends on MACH_DECSTATION
404 bool "Support for console on a DECstation Z85C30 serial port"
405 depends on SERIAL_ZS=y
414 Note that the firmware uses ttyS1 as the serial console on the
415 Maxine and ttyS3 on the others using this driver.
421 depends on FOOTBRIDGE
424 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
429 bool "Console on DC21285 serial port"
430 depends on SERIAL_21285=y
433 If you have enabled the serial port on the 21285 footbridge you can
445 depends on ARCH_PXA || ARCH_MMP
450 If you have a machine based on an Intel XScale PXA2xx CPU you
458 depends on !SERIAL_8250
461 bool "Console on PXA serial port (DEPRECATED)"
462 depends on SERIAL_PXA
466 If you have enabled the serial port on the Intel XScale PXA
481 depends on ARCH_SA1100
485 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
491 bool "Console on SA1100 serial port"
492 depends on SERIAL_SA1100
495 If you have enabled the serial port on the SA1100/SA1110 StrongARM
507 depends on ARCH_MXC || COMPILE_TEST
512 If you have a machine based on a Motorola IMX CPU you
516 bool "Console on IMX serial port"
517 depends on SERIAL_IMX=y
521 If you have enabled the serial port on the Freescale IMX
532 depends on HAS_IOMEM
541 bool "Support for console on Xilinx uartlite serial port"
542 depends on SERIAL_UARTLITE=y
552 depends on SERIAL_UARTLITE
561 depends on SPARC
568 depends on SPARC
570 This driver supports the Zilog8530 serial ports found on many Sparc
574 bool "Console on Sun Zilog8530 serial port"
575 depends on SERIAL_SUNZILOG=y
578 on your Sparc system as the console, you can do so by answering
583 depends on SPARC && PCI
586 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
590 bool "Console on Sun SU serial port"
591 depends on SERIAL_SUNSU=y
594 on your Sparc system as the console, you can do so by answering
599 depends on GSC
611 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
612 3. Add device ttyB0 to /etc/securetty (if you want to log on as
613 root on this console.)
617 bool "Support for console on serial MUX"
618 depends on SERIAL_MUX=y
624 depends on PARISC && !SERIAL_MUX && VT
632 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
633 3. Add device ttyB0 to /etc/securetty (if you want to log on as
634 root on this console.)
639 depends on SPARC && PCI
641 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
646 bool "Console on Sun Siemens SAB82532 serial port"
647 depends on SERIAL_SUNSAB=y
650 on your Sparc system as the console, you can do so by answering
655 depends on SPARC64
657 This driver supports the console device found on SUN4V Sparc
662 depends on SGI_HAS_ZILOG
665 This driver supports the Zilog8530 serial ports found on SGI
669 bool "Console on SGI Zilog8530 serial port"
670 depends on SERIAL_IP22_ZILOG=y
675 depends on SUPERH || ARCH_RENESAS || H8300 || COMPILE_TEST
683 depends on SERIAL_SH_SCI
690 bool "Support for console on SuperH SCI(F)" if EXPERT
691 depends on SERIAL_SH_SCI=y
696 bool "Support for early console on SuperH SCI(F)" if EXPERT
697 depends on SERIAL_SH_SCI=y
704 depends on SERIAL_SH_SCI && DMA_ENGINE
709 depends on SOC_PNX833X
717 depends on SERIAL_PNX8XXX
725 depends on ARCH_LPC32XX || COMPILE_TEST
726 depends on OF
730 Those are UARTs completely different from the Standard UARTs on the
736 depends on SERIAL_HS_LPC32XX=y
740 ports on the LPC32XX as the console, you can do so by answering
754 depends on COLDFIRE
761 depends on SERIAL_MCF
770 depends on SERIAL_MCF
777 depends on (M68K && MAC) || PPC_PMAC
780 This driver supports the Zilog z85C30 serial ports found on
786 depends on SERIAL_PMACZILOG
788 The pmac_zilog driver for the z85C30 chip on many powermacs
798 access the built-in serial ports on powermacs will need to
806 Say N unless you need the z85c30 ports on your (Power)Mac
810 bool "Console on Mac or PowerMac z85c30 serial port"
811 depends on SERIAL_PMACZILOG=y
815 on your (Power)Mac as the console, you can do so by answering
820 depends on CPM2 || CPM1
823 This driver supports the SCC and SMC serial ports on Motorola
827 bool "Support for console on CPM SCC/SMC serial port"
828 depends on SERIAL_CPM=y
844 depends on MACH_PIC32
855 depends on SERIAL_PIC32
858 If you have a PIC32, this driver supports the putting a console on one
865 depends on PPC_MPC52xx || PPC_MPC512x
874 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
875 depends on SERIAL_MPC52xx=y
883 depends on SERIAL_MPC52xx_CONSOLE=y
892 depends on PCI && PPC_PSERIES
905 depends on HAS_TXX9_SERIAL
914 depends on SERIAL_TXX9
919 depends on SERIAL_TXX9=y
924 depends on !SERIAL_8250 && SERIAL_TXX9
928 depends on CPU_VR41XX
937 depends on SERIAL_VR41XX=y
941 a console on a serial port, say Y. Otherwise, say N.
945 depends on PCI
960 tristate "MSM on-chip serial port support"
961 depends on ARCH_QCOM
966 depends on SERIAL_MSM=y
971 tristate "QCOM on-chip GENI based serial port support"
972 depends on ARCH_QCOM || COMPILE_TEST
973 depends on QCOM_GENI_SE
978 depends on SERIAL_QCOM_GENI
986 bool "VIA VT8500 on-chip serial port support"
987 depends on ARCH_VT8500
992 depends on SERIAL_VT8500=y
997 depends on ARCH_OMAP2PLUS
1000 If you have a machine based on an Texas Instruments OMAP CPU you
1008 bool "Console on OMAP serial port"
1009 depends on SERIAL_OMAP=y
1024 depends on OF
1028 contains a SiFive UART IP block. This type of UART is present on
1032 bool "Console on SiFive UART"
1033 depends on SERIAL_SIFIVE=y
1049 depends on LANTIQ
1054 Support for console and UART on Lantiq SoCs.
1058 depends on QUICC_ENGINE
1062 This driver supports the QE serial ports on Freescale embedded
1074 bool "Console on SCCNXP serial port"
1075 depends on SERIAL_SCCNXP=y
1078 Support for console on SCCNXP serial ports.
1086 depends on (SPI_MASTER && !I2C) || I2C
1094 depends on SERIAL_SC16IS7XX
1095 depends on I2C
1100 Enable SC16IS7xx driver on I2C bus,
1107 depends on SERIAL_SC16IS7XX
1108 depends on SPI_MASTER
1112 Enable SC16IS7xx driver on SPI bus,
1120 depends on X86_32 || COMPILE_TEST
1122 Add support for UART controller on timberdale.
1127 depends on MIPS || ARM || COMPILE_TEST
1129 This enables the driver for the onchip UART core found on
1138 bool "Console on BCM63xx serial port"
1139 depends on SERIAL_BCM63XX=y
1143 If you have enabled the serial port on the BCM63xx CPU
1148 depends on OF && SPARC
1154 bool "Console on GRLIB APBUART serial port"
1155 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1158 Support for running a console on the GRLIB APBUART
1168 depends on SERIAL_ALTERA_JTAGUART=y
1176 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1190 depends on SERIAL_ALTERA_UART
1199 depends on SERIAL_ALTERA_UART
1208 depends on SERIAL_ALTERA_UART=y
1216 depends on GPIOLIB || COMPILE_TEST
1217 depends on SPI && HAS_DMA
1219 Support for the IFX6x60 modem devices on Intel MID platforms.
1223 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
1238 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1239 depends on SERIAL_PCH_UART=y
1248 depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
1257 depends on SERIAL_MXS_AUART=y
1264 depends on OF
1272 depends on SERIAL_XILINX_PS_UART=y
1280 depends on HAVE_CLK && ATH79
1290 bool "Console on AR933X serial port"
1291 depends on SERIAL_AR933X=y
1298 depends on SERIAL_AR933X
1306 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1309 This driver support the USART and UART ports on
1314 depends on SERIAL_MPS2_UART
1320 depends on ARCH_MPS2 || COMPILE_TEST
1323 This driver support the UART ports on ARM MPS2.
1327 depends on SERIAL_EFM32_UART=y
1334 Driver for on-chip UART for ARC(Synopsys) for the legacy
1338 bool "Console on ARC UART"
1339 depends on SERIAL_ARC=y
1343 Enable system Console on ARC UART
1347 depends on SERIAL_ARC
1356 depends on PCI
1372 depends on SERIAL_RP2
1380 depends on HAS_DMA
1383 Support for the on-chip lpuart on some Freescale SOCs.
1386 bool "Console on Freescale lpuart serial port"
1387 depends on SERIAL_FSL_LPUART=y
1391 If you have enabled the lpuart serial port on the Freescale SoCs,
1396 depends on PRINTK
1399 Support for the on-chip linflexuart on some Freescale SOCs.
1402 bool "Console on Freescale linflexuart serial port"
1403 depends on SERIAL_FSL_LINFLEXUART=y
1407 If you have enabled the linflexuart serial port on the Freescale
1412 depends on OF
1415 Support for the on-chip USART on Conexant Digicolor SoCs.
1418 bool "Console on Conexant Digicolor serial port"
1419 depends on SERIAL_CONEXANT_DIGICOLOR=y
1422 If you have enabled the USART serial port on Conexant Digicolor
1428 depends on ARM || COMPILE_TEST
1430 This driver is for the on-chip Asychronous Serial Controller on
1438 bool "Support for console on ST ASC"
1439 depends on SERIAL_ST_ASC=y
1445 depends on MCB
1448 on a MCB carrier.
1455 depends on ARCH_SPRD
1462 depends on SERIAL_SPRD=y
1468 with "earlycon" on the kernel command line. The console is
1474 depends on ARCH_STM32 || COMPILE_TEST
1476 This driver is for the on-chip Serial Controller on
1484 bool "Support for console on STM32"
1485 depends on SERIAL_STM32=y
1490 depends on ARCH_MVEBU || COMPILE_TEST
1494 based on the Armada-3700 SoC and wish to use the on-board serial
1500 bool "Console on Marvell EBU serial port"
1501 depends on SERIAL_MVEBU_UART
1513 depends on ARCH_ACTIONS || COMPILE_TEST
1517 Say 'Y' here if you wish to use the on-board serial port.
1521 bool "Console on Actions Semi Owl serial port"
1522 depends on SERIAL_OWL=y
1532 depends on ARCH_RDA || COMPILE_TEST
1536 Say 'Y' here if you wish to use the on-board serial port.
1540 bool "Console on RDA Micro serial port"
1541 depends on SERIAL_RDA=y
1551 depends on ARCH_MILBEAUT || (COMPILE_TEST && OF)
1560 depends on SERIAL_MILBEAUT_USIO
1564 bool "Support for console on MILBEAUT USIO/UART serial port"
1565 depends on SERIAL_MILBEAUT_USIO=y