1# SPDX-License-Identifier: GPL-2.0 2# 3# Copyright (c) 2012 Samsung Electronics Co., Ltd. 4# http://www.samsung.com/ 5# 6# Copyright 2007 Simtec Electronics 7 8if ARCH_S3C24XX 9 10config PLAT_S3C24XX 11 def_bool y 12 select GPIOLIB 13 select NO_IOPORT_MAP 14 select S3C_DEV_NAND 15 select IRQ_DOMAIN 16 select COMMON_CLK 17 help 18 Base platform code for any Samsung S3C24XX device 19 20 21 22menu "SAMSUNG S3C24XX SoCs Support" 23 24comment "S3C24XX SoCs" 25 26config CPU_S3C2410 27 bool "SAMSUNG S3C2410" 28 default y 29 select CPU_ARM920T 30 select S3C2410_COMMON_CLK 31 select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ 32 select S3C2410_PM if PM 33 help 34 Support for S3C2410 and S3C2410A family from the S3C24XX line 35 of Samsung Mobile CPUs. 36 37config CPU_S3C2412 38 bool "SAMSUNG S3C2412" 39 select CPU_ARM926T 40 select S3C2412_COMMON_CLK 41 select S3C2412_PM if PM_SLEEP 42 help 43 Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line 44 45config CPU_S3C2416 46 bool "SAMSUNG S3C2416/S3C2450" 47 select CPU_ARM926T 48 select S3C2416_PM if PM_SLEEP 49 select S3C2443_COMMON_CLK 50 help 51 Support for the S3C2416 SoC from the S3C24XX line 52 53config CPU_S3C2440 54 bool "SAMSUNG S3C2440" 55 select CPU_ARM920T 56 select S3C2410_COMMON_CLK 57 select S3C2410_PM if PM_SLEEP 58 help 59 Support for S3C2440 Samsung Mobile CPU based systems. 60 61config CPU_S3C2442 62 bool "SAMSUNG S3C2442" 63 select CPU_ARM920T 64 select S3C2410_COMMON_CLK 65 select S3C2410_PM if PM_SLEEP 66 help 67 Support for S3C2442 Samsung Mobile CPU based systems. 68 69config CPU_S3C244X 70 def_bool y 71 depends on CPU_S3C2440 || CPU_S3C2442 72 73config CPU_S3C2443 74 bool "SAMSUNG S3C2443" 75 select CPU_ARM920T 76 select S3C2443_COMMON_CLK 77 help 78 Support for the S3C2443 SoC from the S3C24XX line 79 80# common code 81 82config S3C24XX_SMDK 83 bool 84 help 85 Common machine code for SMDK2410 and SMDK2440 86 87config S3C24XX_SIMTEC_AUDIO 88 bool 89 depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS) 90 default y 91 help 92 Add audio devices for common Simtec S3C24XX boards 93 94config S3C24XX_SIMTEC_PM 95 bool 96 help 97 Common power management code for systems that are 98 compatible with the Simtec style of power management 99 100config S3C24XX_SIMTEC_USB 101 bool 102 help 103 USB management code for common Simtec S3C24XX boards 104 105config S3C24XX_SETUP_TS 106 bool 107 help 108 Compile in platform device definition for Samsung TouchScreen. 109 110config S3C2410_PM 111 bool 112 help 113 Power Management code common to S3C2410 and better 114 115config S3C24XX_PLL 116 bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" 117 depends on ARM_S3C24XX_CPUFREQ 118 help 119 Compile in support for changing the PLL frequency from the 120 S3C24XX series CPUfreq driver. The PLL takes time to settle 121 after a frequency change, so by default it is not enabled. 122 123 This also means that the PLL tables for the selected CPU(s) will 124 be built which may increase the size of the kernel image. 125 126config S3C_SETUP_CAMIF 127 bool 128 help 129 Compile in common setup code for S3C CAMIF devices 130 131# cpu frequency items common between s3c2410 and s3c2440/s3c2442 132 133config S3C2410_IOTIMING 134 bool 135 depends on ARM_S3C24XX_CPUFREQ 136 help 137 Internal node to select io timing code that is common to the s3c2410 138 and s3c2440/s3c2442 cpu frequency support. 139 140config S3C2410_CPUFREQ_UTILS 141 bool 142 depends on ARM_S3C24XX_CPUFREQ 143 help 144 Internal node to select timing code that is common to the s3c2410 145 and s3c2440/s3c244 cpu frequency support. 146 147# cpu frequency support common to s3c2412, s3c2413 and s3c2442 148 149config S3C2412_IOTIMING 150 bool 151 depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2412 || CPU_S3C2443) 152 help 153 Intel node to select io timing code that is common to the s3c2412 154 and the s3c2443. 155 156# cpu-specific sections 157 158if CPU_S3C2410 159 160config S3C2410_PLL 161 bool 162 depends on ARM_S3C2410_CPUFREQ && S3C24XX_PLL 163 default y 164 help 165 Select the PLL table for the S3C2410 166 167config S3C24XX_SIMTEC_NOR 168 bool 169 help 170 Internal node to specify machine has simtec NOR mapping 171 172config MACH_BAST_IDE 173 bool 174 select HAVE_PATA_PLATFORM 175 help 176 Internal node for machines with an BAST style IDE 177 interface 178 179comment "S3C2410 Boards" 180 181# 182# The "S3C2410 Boards" list is ordered alphabetically by option text. 183# (without ARCH_ or MACH_) 184# 185 186config MACH_AML_M5900 187 bool "AML M5900 Series" 188 select S3C24XX_SIMTEC_PM if PM 189 select S3C_DEV_USB_HOST 190 help 191 Say Y here if you are using the American Microsystems M5900 Series 192 <http://www.amltd.com> 193 194config ARCH_BAST 195 bool "Simtec Electronics BAST (EB2410ITX)" 196 select ISA 197 select MACH_BAST_IDE 198 select S3C2410_COMMON_DCLK 199 select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ 200 select S3C24XX_SIMTEC_NOR 201 select S3C24XX_SIMTEC_PM if PM 202 select S3C24XX_SIMTEC_USB 203 select S3C_DEV_HWMON 204 select S3C_DEV_NAND 205 select S3C_DEV_USB_HOST 206 help 207 Say Y here if you are using the Simtec Electronics EB2410ITX 208 development board (also known as BAST) 209 210config BAST_PC104_IRQ 211 bool "BAST PC104 IRQ support" 212 depends on ARCH_BAST 213 default y 214 help 215 Say Y here to enable the PC104 IRQ routing on the 216 Simtec BAST (EB2410ITX) 217 218config ARCH_H1940 219 bool "IPAQ H1940" 220 select PM_H1940 if PM 221 select S3C24XX_SETUP_TS 222 select S3C_DEV_NAND 223 select S3C_DEV_USB_HOST 224 help 225 Say Y here if you are using the HP IPAQ H1940 226 227config H1940BT 228 tristate "Control the state of H1940 bluetooth chip" 229 depends on ARCH_H1940 230 depends on RFKILL 231 help 232 This is a simple driver that is able to control 233 the state of built in bluetooth chip on h1940. 234 235config MACH_N30 236 bool "Acer N30 family" 237 select S3C_DEV_NAND 238 select S3C_DEV_USB_HOST 239 help 240 Say Y here if you want suppt for the Acer N30, Acer N35, 241 Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs. 242 243config MACH_OTOM 244 bool "NexVision OTOM Board" 245 select S3C_DEV_NAND 246 select S3C_DEV_USB_HOST 247 help 248 Say Y here if you are using the Nex Vision OTOM board 249 250config MACH_QT2410 251 bool "QT2410" 252 select S3C_DEV_NAND 253 select S3C_DEV_USB_HOST 254 help 255 Say Y here if you are using the Armzone QT2410 256 257config ARCH_SMDK2410 258 bool "SMDK2410/A9M2410" 259 select S3C24XX_SMDK 260 select S3C_DEV_USB_HOST 261 help 262 Say Y here if you are using the SMDK2410 or the derived module A9M2410 263 <http://www.fsforth.de> 264 265config MACH_TCT_HAMMER 266 bool "TCT Hammer Board" 267 select S3C_DEV_USB_HOST 268 help 269 Say Y here if you are using the TinCanTools Hammer Board 270 <http://www.tincantools.com> 271 272config MACH_VR1000 273 bool "Thorcom VR1000" 274 select MACH_BAST_IDE 275 select S3C2410_COMMON_DCLK 276 select S3C24XX_SIMTEC_NOR 277 select S3C24XX_SIMTEC_PM if PM 278 select S3C24XX_SIMTEC_USB 279 select S3C_DEV_USB_HOST 280 help 281 Say Y here if you are using the Thorcom VR1000 board. 282 283endif # CPU_S3C2410 284 285config S3C2412_PM_SLEEP 286 bool 287 help 288 Internal config node to apply sleep for S3C2412 power management. 289 Can be selected by another SoCs such as S3C2416 with similar 290 sleep procedure. 291 292if CPU_S3C2412 293 294config CPU_S3C2412_ONLY 295 bool 296 depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ 297 !CPU_S3C2442 && !CPU_S3C2443 298 default y 299 300config S3C2412_PM 301 bool 302 select S3C2412_PM_SLEEP 303 select SAMSUNG_WAKEMASK 304 help 305 Internal config node to apply S3C2412 power management 306 307comment "S3C2412 Boards" 308 309# 310# The "S3C2412 Boards" list is ordered alphabetically by option text. 311# (without ARCH_ or MACH_) 312# 313 314config MACH_JIVE 315 bool "Logitech Jive" 316 select S3C_DEV_NAND 317 select S3C_DEV_USB_HOST 318 help 319 Say Y here if you are using the Logitech Jive. 320 321config MACH_JIVE_SHOW_BOOTLOADER 322 bool "Allow access to bootloader partitions in MTD" 323 depends on MACH_JIVE 324 325config MACH_S3C2413 326 bool 327 help 328 Internal node for S3C2413 version of SMDK2413, so that 329 machine_is_s3c2413() will work when MACH_SMDK2413 is 330 selected 331 332config MACH_SMDK2412 333 bool "SMDK2412" 334 select MACH_SMDK2413 335 help 336 Say Y here if you are using an SMDK2412 337 338 Note, this shares support with SMDK2413, so will automatically 339 select MACH_SMDK2413. 340 341config MACH_SMDK2413 342 bool "SMDK2413" 343 select MACH_S3C2413 344 select S3C24XX_SMDK 345 select S3C_DEV_NAND 346 select S3C_DEV_USB_HOST 347 help 348 Say Y here if you are using an SMDK2413 349 350config MACH_VSTMS 351 bool "VMSTMS" 352 select S3C_DEV_NAND 353 select S3C_DEV_USB_HOST 354 help 355 Say Y here if you are using an VSTMS board 356 357endif # CPU_S3C2412 358 359if CPU_S3C2416 360 361config S3C2416_PM 362 bool 363 select S3C2412_PM_SLEEP 364 select SAMSUNG_WAKEMASK 365 help 366 Internal config node to apply S3C2416 power management 367 368config S3C2416_SETUP_SDHCI 369 bool 370 select S3C2416_SETUP_SDHCI_GPIO 371 help 372 Internal helper functions for S3C2416 based SDHCI systems 373 374config S3C2416_SETUP_SDHCI_GPIO 375 bool 376 help 377 Common setup code for SDHCI gpio. 378 379comment "S3C2416 Boards" 380 381config MACH_SMDK2416 382 bool "SMDK2416" 383 select S3C2416_SETUP_SDHCI 384 select S3C24XX_SMDK 385 select S3C_DEV_FB 386 select S3C_DEV_HSMMC 387 select S3C_DEV_HSMMC1 388 select S3C_DEV_NAND 389 select S3C_DEV_USB_HOST 390 help 391 Say Y here if you are using an SMDK2416 392 393config MACH_S3C2416_DT 394 bool "Samsung S3C2416 machine using devicetree" 395 select TIMER_OF 396 select USE_OF 397 select PINCTRL 398 select PINCTRL_S3C24XX 399 help 400 Machine support for Samsung S3C2416 machines with device tree enabled. 401 Select this if a fdt blob is available for the S3C2416 SoC based board. 402 Note: This is under development and not all peripherals can be supported 403 with this machine file. 404 405endif # CPU_S3C2416 406 407if CPU_S3C2440 || CPU_S3C2442 408 409config S3C2440_XTAL_12000000 410 bool 411 help 412 Indicate that the build needs to support 12MHz system 413 crystal. 414 415config S3C2440_XTAL_16934400 416 bool 417 help 418 Indicate that the build needs to support 16.9344MHz system 419 crystal. 420 421config S3C2440_PLL_12000000 422 bool 423 depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_12000000 424 default y if S3C24XX_PLL 425 help 426 PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals. 427 428config S3C2440_PLL_16934400 429 bool 430 depends on ARM_S3C2440_CPUFREQ && S3C2440_XTAL_16934400 431 default y if S3C24XX_PLL 432 help 433 PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals. 434endif 435 436if CPU_S3C2440 437 438comment "S3C2440 Boards" 439 440# 441# The "S3C2440 Boards" list is ordered alphabetically by option text. 442# (without ARCH_ or MACH_) 443# 444 445config MACH_ANUBIS 446 bool "Simtec Electronics ANUBIS" 447 select HAVE_PATA_PLATFORM 448 select S3C2410_COMMON_DCLK 449 select S3C2440_XTAL_12000000 450 select S3C24XX_SIMTEC_PM if PM 451 select S3C_DEV_USB_HOST 452 help 453 Say Y here if you are using the Simtec Electronics ANUBIS 454 development system 455 456config MACH_AT2440EVB 457 bool "Avantech AT2440EVB development board" 458 select S3C_DEV_NAND 459 select S3C_DEV_USB_HOST 460 help 461 Say Y here if you are using the AT2440EVB development board 462 463config MACH_MINI2440 464 bool "MINI2440 development board" 465 select LEDS_CLASS 466 select LEDS_TRIGGERS 467 select LEDS_TRIGGER_BACKLIGHT 468 select NEW_LEDS 469 select S3C_DEV_NAND 470 select S3C_DEV_USB_HOST 471 select S3C_SETUP_CAMIF 472 help 473 Say Y here to select support for the MINI2440. Is a 10cm x 10cm board 474 available via various sources. It can come with a 3.5" or 7" touch LCD. 475 476config MACH_NEXCODER_2440 477 bool "NexVision NEXCODER 2440 Light Board" 478 select S3C2440_XTAL_12000000 479 select S3C_DEV_NAND 480 select S3C_DEV_USB_HOST 481 help 482 Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board 483 484config MACH_OSIRIS 485 bool "Simtec IM2440D20 (OSIRIS) module" 486 select S3C2410_COMMON_DCLK 487 select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ 488 select S3C2440_XTAL_12000000 489 select S3C24XX_SIMTEC_PM if PM 490 select S3C_DEV_NAND 491 select S3C_DEV_USB_HOST 492 help 493 Say Y here if you are using the Simtec IM2440D20 module, also 494 known as the Osiris. 495 496config MACH_OSIRIS_DVS 497 tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver" 498 depends on MACH_OSIRIS 499 depends on TPS65010 500 help 501 Say Y/M here if you want to have dynamic voltage scaling support 502 on the Simtec IM2440D20 (OSIRIS) module via the TPS65011. 503 504 The DVS driver alters the voltage supplied to the ARM core 505 depending on the frequency it is running at. The driver itself 506 does not do any of the frequency alteration, which is left up 507 to the cpufreq driver. 508 509config MACH_RX3715 510 bool "HP iPAQ rx3715" 511 select PM_H1940 if PM 512 select S3C2440_XTAL_16934400 513 select S3C_DEV_NAND 514 help 515 Say Y here if you are using the HP iPAQ rx3715. 516 517config ARCH_S3C2440 518 bool "SMDK2440" 519 select S3C2440_XTAL_16934400 520 select S3C24XX_SMDK 521 select S3C_DEV_NAND 522 select S3C_DEV_USB_HOST 523 help 524 Say Y here if you are using the SMDK2440. 525 526config SMDK2440_CPU2440 527 bool "SMDK2440 with S3C2440 CPU module" 528 default y if ARCH_S3C2440 529 select S3C2440_XTAL_16934400 530 531endif # CPU_S3C2440 532 533if CPU_S3C2442 534 535comment "S3C2442 Boards" 536 537# 538# The "S3C2442 Boards" list is ordered alphabetically by option text. 539# (without ARCH_ or MACH_) 540# 541 542config MACH_NEO1973_GTA02 543 bool "Openmoko GTA02 / Freerunner phone" 544 select I2C 545 select MFD_PCF50633 546 select PCF50633_GPIO 547 select POWER_SUPPLY 548 select S3C24XX_PWM 549 select S3C_DEV_USB_HOST 550 help 551 Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone 552 553config MACH_RX1950 554 bool "HP iPAQ rx1950" 555 select I2C 556 select PM_H1940 if PM 557 select S3C2410_COMMON_DCLK 558 select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ 559 select S3C2440_XTAL_16934400 560 select S3C24XX_PWM 561 select S3C_DEV_NAND 562 help 563 Say Y here if you're using HP iPAQ rx1950 564 565endif # CPU_S3C2442 566 567if CPU_S3C2443 || CPU_S3C2416 568 569config S3C2443_SETUP_SPI 570 bool 571 help 572 Common setup code for SPI GPIO configurations 573 574endif # CPU_S3C2443 || CPU_S3C2416 575 576if CPU_S3C2443 577 578comment "S3C2443 Boards" 579 580config MACH_SMDK2443 581 bool "SMDK2443" 582 select S3C24XX_SMDK 583 select S3C_DEV_HSMMC1 584 help 585 Say Y here if you are using an SMDK2443 586 587endif # CPU_S3C2443 588 589config PM_H1940 590 bool 591 help 592 Internal node for H1940 and related PM 593 594endmenu # SAMSUNG S3C24XX SoCs Support 595 596endif # ARCH_S3C24XX 597