1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries. 4 * All rights reserved. 5 */ 6 7 #ifndef WILC_WLAN_IF_H 8 #define WILC_WLAN_IF_H 9 10 #include <linux/netdevice.h> 11 12 /******************************************** 13 * 14 * Wlan Configuration ID 15 * 16 ********************************************/ 17 18 enum bss_types { 19 WILC_FW_BSS_TYPE_INFRA = 0, 20 WILC_FW_BSS_TYPE_INDEPENDENT, 21 WILC_FW_BSS_TYPE_AP, 22 }; 23 24 enum { 25 WILC_FW_OPER_MODE_B_ONLY = 0, /* 1, 2 M, otherwise 5, 11 M */ 26 WILC_FW_OPER_MODE_G_ONLY, /* 6,12,24 otherwise 9,18,36,48,54 */ 27 WILC_FW_OPER_MODE_G_MIXED_11B_1, /* 1,2,5.5,11 otherwise all on */ 28 WILC_FW_OPER_MODE_G_MIXED_11B_2, /* 1,2,5,11,6,12,24 otherwise all on */ 29 }; 30 31 enum { 32 WILC_FW_PREAMBLE_SHORT = 0, /* Short Preamble */ 33 WILC_FW_PREAMBLE_LONG = 1, /* Long Preamble */ 34 WILC_FW_PREAMBLE_AUTO = 2, /* Auto Preamble Selection */ 35 }; 36 37 enum { 38 WILC_FW_PASSIVE_SCAN = 0, 39 WILC_FW_ACTIVE_SCAN = 1, 40 }; 41 42 enum { 43 WILC_FW_NO_POWERSAVE = 0, 44 WILC_FW_MIN_FAST_PS = 1, 45 WILC_FW_MAX_FAST_PS = 2, 46 WILC_FW_MIN_PSPOLL_PS = 3, 47 WILC_FW_MAX_PSPOLL_PS = 4 48 }; 49 50 enum chip_ps_states { 51 WILC_CHIP_WAKEDUP = 0, 52 WILC_CHIP_SLEEPING_AUTO = 1, 53 WILC_CHIP_SLEEPING_MANUAL = 2 54 }; 55 56 enum bus_acquire { 57 WILC_BUS_ACQUIRE_ONLY = 0, 58 WILC_BUS_ACQUIRE_AND_WAKEUP = 1, 59 }; 60 61 enum bus_release { 62 WILC_BUS_RELEASE_ONLY = 0, 63 WILC_BUS_RELEASE_ALLOW_SLEEP = 1, 64 }; 65 66 enum { 67 WILC_FW_NO_ENCRYPT = 0, 68 WILC_FW_ENCRYPT_ENABLED = BIT(0), 69 WILC_FW_WEP = BIT(1), 70 WILC_FW_WEP_EXTENDED = BIT(2), 71 WILC_FW_WPA = BIT(3), 72 WILC_FW_WPA2 = BIT(4), 73 WILC_FW_AES = BIT(5), 74 WILC_FW_TKIP = BIT(6) 75 }; 76 77 enum { 78 WILC_FW_SEC_NO = WILC_FW_NO_ENCRYPT, 79 WILC_FW_SEC_WEP = WILC_FW_WEP | WILC_FW_ENCRYPT_ENABLED, 80 WILC_FW_SEC_WEP_EXTENDED = WILC_FW_WEP_EXTENDED | WILC_FW_SEC_WEP, 81 WILC_FW_SEC_WPA = WILC_FW_WPA | WILC_FW_ENCRYPT_ENABLED, 82 WILC_FW_SEC_WPA_AES = WILC_FW_AES | WILC_FW_SEC_WPA, 83 WILC_FW_SEC_WPA_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA, 84 WILC_FW_SEC_WPA2 = WILC_FW_WPA2 | WILC_FW_ENCRYPT_ENABLED, 85 WILC_FW_SEC_WPA2_AES = WILC_FW_AES | WILC_FW_SEC_WPA2, 86 WILC_FW_SEC_WPA2_TKIP = WILC_FW_TKIP | WILC_FW_SEC_WPA2 87 }; 88 89 enum authtype { 90 WILC_FW_AUTH_OPEN_SYSTEM = 1, 91 WILC_FW_AUTH_SHARED_KEY = 2, 92 WILC_FW_AUTH_ANY = 3, 93 WILC_FW_AUTH_IEEE8021 = 5 94 }; 95 96 enum site_survey { 97 WILC_FW_SITE_SURVEY_1CH = 0, 98 WILC_FW_SITE_SURVEY_ALL_CH = 1, 99 WILC_FW_SITE_SURVEY_OFF = 2 100 }; 101 102 enum { 103 WILC_FW_ACK_POLICY_NORMAL = 0, 104 WILC_FW_ACK_NO_POLICY, 105 }; 106 107 enum { 108 WILC_FW_REKEY_POLICY_DISABLE = 1, 109 WILC_FW_REKEY_POLICY_TIME_BASE, 110 WILC_FW_REKEY_POLICY_PKT_BASE, 111 WILC_FW_REKEY_POLICY_TIME_PKT_BASE 112 }; 113 114 enum { 115 WILC_FW_FILTER_NO = 0x00, 116 WILC_FW_FILTER_AP_ONLY = 0x01, 117 WILC_FW_FILTER_STA_ONLY = 0x02 118 }; 119 120 enum { 121 WILC_FW_11N_PROT_AUTO = 0, /* Auto */ 122 WILC_FW_11N_NO_PROT, /* Do not use any protection */ 123 WILC_FW_11N_PROT_ERP, /* Protect all ERP frame exchanges */ 124 WILC_FW_11N_PROT_HT, /* Protect all HT frame exchanges */ 125 WILC_FW_11N_PROT_GF /* Protect all GF frame exchanges */ 126 }; 127 128 enum { 129 WILC_FW_ERP_PROT_SELF_CTS, 130 WILC_FW_ERP_PROT_RTS_CTS, 131 }; 132 133 enum { 134 WILC_FW_11N_OP_MODE_HT_MIXED = 1, 135 WILC_FW_11N_OP_MODE_HT_ONLY_20MHZ, 136 WILC_FW_11N_OP_MODE_HT_ONLY_20_40MHZ, 137 }; 138 139 enum { 140 WILC_FW_OBBS_NONHT_NO_DETECT = 0, 141 WILC_FW_OBBS_NONHT_DETECT_ONLY = 1, 142 WILC_FW_OBBS_NONHT_DETECT_PROTECT = 2, 143 WILC_FW_OBBS_NONHT_DETECT_PROTECT_REPORT = 3, 144 }; 145 146 enum { 147 WILC_FW_HT_PROT_RTS_CTS_NONHT = 0, /* RTS-CTS at non-HT rate */ 148 WILC_FW_HT_PROT_FIRST_FRAME_NONHT, /* First frame at non-HT rate */ 149 WILC_FW_HT_PROT_LSIG_TXOP, /* LSIG TXOP Protection */ 150 WILC_FW_HT_PROT_FIRST_FRAME_MIXED, /* First frame at Mixed format */ 151 }; 152 153 enum { 154 WILC_FW_SMPS_MODE_STATIC = 1, 155 WILC_FW_SMPS_MODE_DYNAMIC = 2, 156 WILC_FW_SMPS_MODE_MIMO = 3, /* power save disable */ 157 }; 158 159 enum { 160 WILC_FW_TX_RATE_AUTO = 0, 161 WILC_FW_TX_RATE_MBPS_1 = 1, 162 WILC_FW_TX_RATE_MBPS_2 = 2, 163 WILC_FW_TX_RATE_MBPS_5_5 = 5, 164 WILC_FW_TX_RATE_MBPS_11 = 11, 165 WILC_FW_TX_RATE_MBPS_6 = 6, 166 WILC_FW_TX_RATE_MBPS_9 = 9, 167 WILC_FW_TX_RATE_MBPS_12 = 12, 168 WILC_FW_TX_RATE_MBPS_18 = 18, 169 WILC_FW_TX_RATE_MBPS_24 = 24, 170 WILC_FW_TX_RATE_MBPS_36 = 36, 171 WILC_FW_TX_RATE_MBPS_48 = 48, 172 WILC_FW_TX_RATE_MBPS_54 = 54 173 }; 174 175 enum { 176 WILC_FW_DEFAULT_SCAN = 0, 177 WILC_FW_USER_SCAN = BIT(0), 178 WILC_FW_OBSS_PERIODIC_SCAN = BIT(1), 179 WILC_FW_OBSS_ONETIME_SCAN = BIT(2) 180 }; 181 182 enum { 183 WILC_FW_ACTION_FRM_IDX = 0, 184 WILC_FW_PROBE_REQ_IDX = 1 185 }; 186 187 enum wid_type { 188 WID_CHAR = 0, 189 WID_SHORT = 1, 190 WID_INT = 2, 191 WID_STR = 3, 192 WID_BIN_DATA = 4, 193 WID_BIN = 5, 194 }; 195 196 struct wid { 197 u16 id; 198 enum wid_type type; 199 s32 size; 200 s8 *val; 201 }; 202 203 enum { 204 WID_NIL = 0xffff, 205 206 /* 207 * BSS Type 208 * ----------------------------------------------------------- 209 * Configuration : Infrastructure Independent Access Point 210 * Values to set : 0 1 2 211 * ----------------------------------------------------------- 212 */ 213 WID_BSS_TYPE = 0x0000, 214 215 /* 216 * Transmit Rate 217 * ----------------------------------------------------------- 218 * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 219 * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 220 * ----------------------------------------------------------- 221 */ 222 WID_CURRENT_TX_RATE = 0x0001, 223 224 /* 225 * Channel 226 * ----------------------------------------------------------- 227 * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 228 * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 229 * ----------------------------------------------------------- 230 */ 231 WID_CURRENT_CHANNEL = 0x0002, 232 233 /* 234 * Preamble 235 * ----------------------------------------------------------- 236 * Configuration : short long Auto 237 * Values to set : 0 1 2 238 * ----------------------------------------------------------- 239 */ 240 WID_PREAMBLE = 0x0003, 241 242 /* 243 * 11g operating mode (ignored if 11g not present) 244 * ----------------------------------------------------------- 245 * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) 246 * Values to set : 1 2 3 247 * ----------------------------------------------------------- 248 */ 249 WID_11G_OPERATING_MODE = 0x0004, 250 251 /* 252 * Mac status (response only) 253 * ----------------------------------------------------------- 254 * Configuration : disconnect connect 255 * Values to get : 0 1 256 * ----------------------------------------------------------- 257 */ 258 WID_STATUS = 0x0005, 259 260 /* 261 * Scan type 262 * ----------------------------------------------------------- 263 * Configuration : Passive Scanning Active Scanning 264 * Values to set : 0 1 265 * ----------------------------------------------------------- 266 */ 267 WID_SCAN_TYPE = 0x0007, 268 269 /* 270 * Key Id (WEP default key Id) 271 * ----------------------------------------------------------- 272 * Configuration : Any value between 0 to 3 273 * Values to set : Same value. Default is 0 274 * ----------------------------------------------------------- 275 */ 276 WID_KEY_ID = 0x0009, 277 278 /* 279 * QoS Enable 280 * ----------------------------------------------------------- 281 * Configuration : QoS Disable WMM Enable 282 * Values to set : 0 1 283 * ----------------------------------------------------------- 284 */ 285 WID_QOS_ENABLE = 0x000A, 286 287 /* 288 * Power Management 289 * ----------------------------------------------------------- 290 * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE 291 * Values to set : 0 1 2 292 * ----------------------------------------------------------- 293 */ 294 WID_POWER_MANAGEMENT = 0x000B, 295 296 /* 297 * WEP/802 11I Configuration 298 * ----------------------------------------------------------- 299 * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP 300 * Values (0x) : 00 03 07 29 49 31 51 301 * Configuration:WPA-AES+TKIP RSN-AES+TKIP 302 * Values (0x) : 69 71 303 * ----------------------------------------------------------- 304 */ 305 WID_11I_MODE = 0x000C, 306 307 /* 308 * WEP Configuration: Used in BSS STA mode only when WEP is enabled 309 * ----------------------------------------------------------- 310 * Configuration : Open System Shared Key Any Type | 802.1x Auth 311 * Values (0x) : 01 02 03 | BIT2 312 * ----------------------------------------------------------- 313 */ 314 WID_AUTH_TYPE = 0x000D, 315 316 /* 317 * Site Survey Type 318 * ----------------------------------------------------------- 319 * Configuration : Values to set 320 * Survey 1 Channel : 0 321 * survey all Channels : 1 322 * Disable Site Survey : 2 323 * ----------------------------------------------------------- 324 */ 325 WID_SITE_SURVEY = 0x000E, 326 327 /* 328 * Listen Interval 329 * ----------------------------------------------------------- 330 * Configuration : Any value between 1 to 255 331 * Values to set : Same value. Default is 3 332 * ----------------------------------------------------------- 333 */ 334 WID_LISTEN_INTERVAL = 0x000F, 335 336 /* 337 * DTIM Period 338 * ----------------------------------------------------------- 339 * Configuration : Any value between 1 to 255 340 * Values to set : Same value. Default is 3 341 * ----------------------------------------------------------- 342 */ 343 WID_DTIM_PERIOD = 0x0010, 344 345 /* 346 * ACK Policy 347 * ----------------------------------------------------------- 348 * Configuration : Normal Ack No Ack 349 * Values to set : 0 1 350 * ----------------------------------------------------------- 351 */ 352 WID_ACK_POLICY = 0x0011, 353 354 /* 355 * Reset MAC (Set only) 356 * ----------------------------------------------------------- 357 * Configuration : Don't Reset Reset No Request 358 * Values to set : 0 1 2 359 * ----------------------------------------------------------- 360 */ 361 WID_RESET = 0x0012, 362 363 /* 364 * Broadcast SSID Option: Setting this will adhere to "" SSID element 365 * ----------------------------------------------------------- 366 * Configuration : Enable Disable 367 * Values to set : 1 0 368 * ----------------------------------------------------------- 369 */ 370 WID_BCAST_SSID = 0x0015, 371 372 /* 373 * Disconnect (Station) 374 * ----------------------------------------------------------- 375 * Configuration : Association ID 376 * Values to set : Association ID 377 * ----------------------------------------------------------- 378 */ 379 WID_DISCONNECT = 0x0016, 380 381 /* 382 * 11a Tx Power Level 383 * ----------------------------------------------------------- 384 * Configuration : Sets TX Power (Higher the value greater the power) 385 * Values to set : Any value between 0 and 63 (inclusive Default 48) 386 * ----------------------------------------------------------- 387 */ 388 WID_TX_POWER_LEVEL_11A = 0x0018, 389 390 /* 391 * Group Key Update Policy Selection 392 * ----------------------------------------------------------- 393 * Configuration : Disabled timeBased packetBased timePacketBased 394 * Values to set : 1 2 3 4 395 * ----------------------------------------------------------- 396 */ 397 WID_REKEY_POLICY = 0x0019, 398 399 /* 400 * Allow Short Slot 401 * ----------------------------------------------------------- 402 * Configuration : Disallow Short Slot Allow Short Slot 403 * (Enable Only Long Slot) (Enable Short Slot if applicable) 404 * Values to set : 0 1 405 * ----------------------------------------------------------- 406 */ 407 WID_SHORT_SLOT_ALLOWED = 0x001A, 408 409 WID_PHY_ACTIVE_REG = 0x001B, 410 411 /* 412 * 11b Tx Power Level 413 * ----------------------------------------------------------- 414 * Configuration : Sets TX Power (Higher the value greater the power) 415 * Values to set : Any value between 0 and 63 (inclusive Default 48) 416 * ----------------------------------------------------------- 417 */ 418 WID_TX_POWER_LEVEL_11B = 0x001D, 419 420 /* 421 * Scan Request 422 * ----------------------------------------------------------- 423 * Configuration : Request default scan 424 * Values to set : 0 425 * ----------------------------------------------------------- 426 */ 427 WID_START_SCAN_REQ = 0x001E, 428 429 /* 430 * Rssi (get only) 431 * ----------------------------------------------------------- 432 * Configuration : 433 * Values to get : Rssi value 434 * ----------------------------------------------------------- 435 */ 436 WID_RSSI = 0x001F, 437 438 /* 439 * Join Request 440 * ----------------------------------------------------------- 441 * Configuration : Request to join 442 * Values to set : index of scan result 443 * ----------------------------------------------------------- 444 */ 445 WID_JOIN_REQ = 0x0020, 446 447 WID_LINKSPEED = 0x0026, 448 449 /* 450 * Enable User Control of TX Power 451 * ----------------------------------------------------------- 452 * Configuration : Disable Enable 453 * Values to set : 0 1 454 * ----------------------------------------------------------- 455 */ 456 WID_USER_CONTROL_ON_TX_POWER = 0x0027, 457 458 WID_MEMORY_ACCESS_8BIT = 0x0029, 459 460 /* 461 * Enable Auto RX Sensitivity feature 462 * ----------------------------------------------------------- 463 * Configuration : Disable Enable 464 * Values to set : 0 1 465 * ----------------------------------------------------------- 466 */ 467 WID_AUTO_RX_SENSITIVITY = 0x0032, 468 469 /* 470 * Receive Buffer Based Ack 471 * ----------------------------------------------------------- 472 * Configuration : Disable Enable 473 * Values to set : 0 1 474 * ----------------------------------------------------------- 475 */ 476 WID_DATAFLOW_CONTROL = 0x0033, 477 478 /* 479 * Scan Filter 480 * ----------------------------------------------------------- 481 * Configuration : Class No filter AP only Station Only 482 * Values to set : 0 1 2 483 * Configuration : Priority High Rssi Low Rssi Detect 484 * Values to set : 0 0x4 0x0 485 * Configuration : Channel filter off filter on 486 * Values to set : 0 0x10 487 * ----------------------------------------------------------- 488 */ 489 WID_SCAN_FILTER = 0x0036, 490 491 /* 492 * Link Loss Threshold (measure in the beacon period) 493 * ----------------------------------------------------------- 494 * Configuration : Any value between 10 and 254(Set to 255 disable) 495 * Values to set : Same value. Default is 10 496 * ----------------------------------------------------------- 497 */ 498 WID_LINK_LOSS_THRESHOLD = 0x0037, 499 500 WID_ABORT_RUNNING_SCAN = 0x003E, 501 502 /* NMAC Character WID list */ 503 WID_WPS_START = 0x0043, 504 505 /* 506 * Protection mode for MAC 507 * ----------------------------------------------------------- 508 * Configuration : Auto No protection ERP HT GF 509 * Values to set : 0 1 2 3 4 510 * ----------------------------------------------------------- 511 */ 512 WID_11N_PROT_MECH = 0x0080, 513 514 /* 515 * ERP Protection type for MAC 516 * ----------------------------------------------------------- 517 * Configuration : Self-CTS RTS-CTS 518 * Values to set : 0 1 519 * ----------------------------------------------------------- 520 */ 521 WID_11N_ERP_PROT_TYPE = 0x0081, 522 523 /* 524 * HT Option Enable 525 * ----------------------------------------------------------- 526 * Configuration : HT Enable HT Disable 527 * Values to set : 1 0 528 * ----------------------------------------------------------- 529 */ 530 WID_11N_ENABLE = 0x0082, 531 532 /* 533 * 11n Operating mode (Note that 11g operating mode will also be 534 * used in addition to this, if this is set to HT Mixed mode) 535 * ----------------------------------------------------------- 536 * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz 537 * Values to set : 1 2 3 538 * ----------------------------------------------------------- 539 */ 540 WID_11N_OPERATING_MODE = 0x0083, 541 542 /* 543 * 11n OBSS non-HT STA Detection flag 544 * ----------------------------------------------------------- 545 * Configuration : Do not detect 546 * Values to set : 0 547 * Configuration : Detect, do not protect or report 548 * Values to set : 1 549 * Configuration : Detect, protect and do not report 550 * Values to set : 2 551 * Configuration : Detect, protect and report to other BSS 552 * Values to set : 3 553 * ----------------------------------------------------------- 554 */ 555 WID_11N_OBSS_NONHT_DETECTION = 0x0084, 556 557 /* 558 * 11n HT Protection Type 559 * ----------------------------------------------------------- 560 * Configuration : RTS-CTS First Frame Exchange at non-HT-rate 561 * Values to set : 0 1 562 * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt 563 * Values to set : 2 3 564 * ----------------------------------------------------------- 565 */ 566 WID_11N_HT_PROT_TYPE = 0x0085, 567 568 /* 569 * 11n RIFS Protection Enable Flag 570 * ----------------------------------------------------------- 571 * Configuration : Disable Enable 572 * Values to set : 0 1 573 * ----------------------------------------------------------- 574 */ 575 WID_11N_RIFS_PROT_ENABLE = 0x0086, 576 577 /* 578 * SMPS Mode 579 * ----------------------------------------------------------- 580 * Configuration : Static Dynamic MIMO (Power Save Disabled) 581 * Values to set : 1 2 3 582 * ----------------------------------------------------------- 583 */ 584 WID_11N_SMPS_MODE = 0x0087, 585 586 /* 587 * Current transmit MCS 588 * ----------------------------------------------------------- 589 * Configuration : MCS Index for data rate 590 * Values to set : 0 to 7 591 * ----------------------------------------------------------- 592 */ 593 WID_11N_CURRENT_TX_MCS = 0x0088, 594 595 WID_11N_PRINT_STATS = 0x0089, 596 597 /* 598 * 11n Short GI Enable Flag 599 * ----------------------------------------------------------- 600 * Configuration : Disable Enable 601 * Values to set : 0 1 602 * ----------------------------------------------------------- 603 */ 604 WID_11N_SHORT_GI_ENABLE = 0x008D, 605 606 /* 607 * 11n RIFS Enable Flag 608 * ----------------------------------------------------------- 609 * Configuration : Disable Enable 610 * Values to set : 0 1 611 * ----------------------------------------------------------- 612 */ 613 WID_RIFS_MODE = 0x0094, 614 615 /* 616 * TX Abort Feature 617 * ----------------------------------------------------------- 618 * Configuration : Disable Self CTS Enable Self CTS 619 * Values to set : 0 1 620 * Configuration : Disable TX Abort Enable TX Abort 621 * Values to set : 2 3 622 * Configuration : Enable HW TX Abort Enable SW TX Abort 623 * Values to set : 4 5 624 * ----------------------------------------------------------- 625 */ 626 WID_TX_ABORT_CONFIG = 0x00A1, 627 628 WID_REG_TSSI_11B_VALUE = 0x00A6, 629 WID_REG_TSSI_11G_VALUE = 0x00A7, 630 WID_REG_TSSI_11N_VALUE = 0x00A8, 631 WID_TX_CALIBRATION = 0x00A9, 632 WID_DSCR_TSSI_11B_VALUE = 0x00AA, 633 WID_DSCR_TSSI_11G_VALUE = 0x00AB, 634 WID_DSCR_TSSI_11N_VALUE = 0x00AC, 635 636 /* 637 * Immediate Block-Ack Support 638 * ----------------------------------------------------------- 639 * Configuration : Disable Enable 640 * Values to set : 0 1 641 * ----------------------------------------------------------- 642 */ 643 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, 644 645 /* 646 * TXOP Disable Flag 647 * ----------------------------------------------------------- 648 * Configuration : Disable Enable 649 * Values to set : 1 0 650 * ----------------------------------------------------------- 651 */ 652 WID_11N_TXOP_PROT_DISABLE = 0x00B0, 653 654 WID_TX_POWER_LEVEL_11N = 0x00B1, 655 656 /* Custom Character WID list */ 657 /* SCAN Complete notification WID*/ 658 WID_SCAN_COMPLETE = 0x00C9, 659 660 WID_DEL_BEACON = 0x00CA, 661 662 WID_LOG_TERMINAL_SWITCH = 0x00CD, 663 WID_TX_POWER = 0x00CE, 664 /* EMAC Short WID list */ 665 /* RTS Threshold */ 666 /* 667 * ----------------------------------------------------------- 668 * Configuration : Any value between 256 to 2347 669 * Values to set : Same value. Default is 2347 670 * ----------------------------------------------------------- 671 */ 672 WID_RTS_THRESHOLD = 0x1000, 673 674 /* 675 * Fragmentation Threshold 676 * ----------------------------------------------------------- 677 * Configuration : Any value between 256 to 2346 678 * Values to set : Same value. Default is 2346 679 * ----------------------------------------------------------- 680 */ 681 WID_FRAG_THRESHOLD = 0x1001, 682 683 WID_SHORT_RETRY_LIMIT = 0x1002, 684 WID_LONG_RETRY_LIMIT = 0x1003, 685 WID_BEACON_INTERVAL = 0x1006, 686 WID_MEMORY_ACCESS_16BIT = 0x1008, 687 WID_PASSIVE_SCAN_TIME = 0x100D, 688 WID_JOIN_START_TIMEOUT = 0x100F, 689 WID_ASOC_TIMEOUT = 0x1011, 690 WID_11I_PROTOCOL_TIMEOUT = 0x1012, 691 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, 692 693 /* NMAC Short WID list */ 694 WID_11N_SIG_QUAL_VAL = 0x1085, 695 WID_CCA_THRESHOLD = 0x1087, 696 697 /* Custom Short WID list */ 698 699 /* EMAC Integer WID list */ 700 WID_FAILED_COUNT = 0x2000, 701 WID_RETRY_COUNT = 0x2001, 702 WID_MULTIPLE_RETRY_COUNT = 0x2002, 703 WID_FRAME_DUPLICATE_COUNT = 0x2003, 704 WID_ACK_FAILURE_COUNT = 0x2004, 705 WID_RECEIVED_FRAGMENT_COUNT = 0x2005, 706 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, 707 WID_FCS_ERROR_COUNT = 0x2007, 708 WID_SUCCESS_FRAME_COUNT = 0x2008, 709 WID_HUT_TX_COUNT = 0x200A, 710 WID_TX_FRAGMENT_COUNT = 0x200B, 711 WID_TX_MULTICAST_FRAME_COUNT = 0x200C, 712 WID_RTS_SUCCESS_COUNT = 0x200D, 713 WID_RTS_FAILURE_COUNT = 0x200E, 714 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, 715 WID_REKEY_PERIOD = 0x2010, 716 WID_REKEY_PACKET_COUNT = 0x2011, 717 WID_1X_SERV_ADDR = 0x2012, 718 WID_STACK_IP_ADDR = 0x2013, 719 WID_STACK_NETMASK_ADDR = 0x2014, 720 WID_HW_RX_COUNT = 0x2015, 721 WID_MEMORY_ADDRESS = 0x201E, 722 WID_MEMORY_ACCESS_32BIT = 0x201F, 723 724 /* NMAC Integer WID list */ 725 /* Custom Integer WID list */ 726 WID_GET_INACTIVE_TIME = 0x2084, 727 /* EMAC String WID list */ 728 WID_SSID = 0x3000, 729 WID_FIRMWARE_VERSION = 0x3001, 730 WID_OPERATIONAL_RATE_SET = 0x3002, 731 WID_BSSID = 0x3003, 732 WID_WEP_KEY_VALUE = 0x3004, 733 WID_11I_PSK = 0x3008, 734 WID_11E_P_ACTION_REQ = 0x3009, 735 WID_1X_KEY = 0x300A, 736 WID_HARDWARE_VERSION = 0x300B, 737 WID_MAC_ADDR = 0x300C, 738 WID_HUT_DEST_ADDR = 0x300D, 739 WID_PHY_VERSION = 0x300F, 740 WID_SUPP_USERNAME = 0x3010, 741 WID_SUPP_PASSWORD = 0x3011, 742 WID_SITE_SURVEY_RESULTS = 0x3012, 743 WID_RX_POWER_LEVEL = 0x3013, 744 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, 745 WID_ADD_WEP_KEY = 0x3019, 746 WID_REMOVE_WEP_KEY = 0x301A, 747 WID_ADD_PTK = 0x301B, 748 WID_ADD_RX_GTK = 0x301C, 749 WID_ADD_TX_GTK = 0x301D, 750 WID_REMOVE_KEY = 0x301E, 751 WID_ASSOC_REQ_INFO = 0x301F, 752 WID_ASSOC_RES_INFO = 0x3020, 753 WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ 754 WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ 755 WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ 756 WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ 757 758 /* NMAC String WID list */ 759 WID_SET_OPERATION_MODE = 0x3079, 760 WID_11N_P_ACTION_REQ = 0x3080, 761 WID_HUT_TEST_ID = 0x3081, 762 WID_PMKID_INFO = 0x3082, 763 WID_FIRMWARE_INFO = 0x3083, 764 WID_REGISTER_FRAME = 0x3084, 765 WID_DEL_ALL_STA = 0x3085, 766 WID_REMAIN_ON_CHAN = 0x3996, 767 WID_SSID_PROBE_REQ = 0x3997, 768 WID_JOIN_REQ_EXTENDED = 0x3998, 769 770 WID_IP_ADDRESS = 0x3999, 771 772 /* Custom String WID list */ 773 774 /* EMAC Binary WID list */ 775 WID_UAPSD_CONFIG = 0x4001, 776 WID_UAPSD_STATUS = 0x4002, 777 WID_WMM_AP_AC_PARAMS = 0x4003, 778 WID_WMM_STA_AC_PARAMS = 0x4004, 779 WID_NETWORK_INFO = 0x4005, 780 WID_STA_JOIN_INFO = 0x4006, 781 WID_CONNECTED_STA_LIST = 0x4007, 782 783 /* NMAC Binary WID list */ 784 WID_11N_AUTORATE_TABLE = 0x4080, 785 786 WID_SCAN_CHANNEL_LIST = 0x4084, 787 788 WID_INFO_ELEMENT_PROBE = 0x4085, 789 WID_INFO_ELEMENT_ASSOCIATE = 0x4086, 790 WID_ADD_STA = 0X4087, 791 WID_REMOVE_STA = 0X4088, 792 WID_EDIT_STA = 0X4089, 793 WID_ADD_BEACON = 0x408a, 794 795 WID_SETUP_MULTICAST_FILTER = 0x408b, 796 797 /* Miscellaneous WIDs */ 798 WID_ALL = 0x7FFE, 799 WID_MAX = 0xFFFF 800 }; 801 802 #endif 803