1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
4 *
5 * hub.c - virtual hub handling
6 *
7 * Copyright 2017 IBM Corporation
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 */
14
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/platform_device.h>
18 #include <linux/delay.h>
19 #include <linux/ioport.h>
20 #include <linux/slab.h>
21 #include <linux/errno.h>
22 #include <linux/list.h>
23 #include <linux/interrupt.h>
24 #include <linux/proc_fs.h>
25 #include <linux/prefetch.h>
26 #include <linux/clk.h>
27 #include <linux/usb/gadget.h>
28 #include <linux/of.h>
29 #include <linux/of_gpio.h>
30 #include <linux/regmap.h>
31 #include <linux/dma-mapping.h>
32 #include <linux/bcd.h>
33 #include <linux/version.h>
34 #include <linux/usb.h>
35 #include <linux/usb/hcd.h>
36
37 #include "vhub.h"
38
39 /* usb 2.0 hub device descriptor
40 *
41 * A few things we may want to improve here:
42 *
43 * - We may need to indicate TT support
44 * - We may need a device qualifier descriptor
45 * as devices can pretend to be usb1 or 2
46 * - Make vid/did overridable
47 * - make it look like usb1 if usb1 mode forced
48 */
49 #define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
50 #define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
51
52 enum {
53 AST_VHUB_STR_MANUF = 3,
54 AST_VHUB_STR_PRODUCT = 2,
55 AST_VHUB_STR_SERIAL = 1,
56 };
57
58 static const struct usb_device_descriptor ast_vhub_dev_desc = {
59 .bLength = USB_DT_DEVICE_SIZE,
60 .bDescriptorType = USB_DT_DEVICE,
61 .bcdUSB = cpu_to_le16(0x0200),
62 .bDeviceClass = USB_CLASS_HUB,
63 .bDeviceSubClass = 0,
64 .bDeviceProtocol = 1,
65 .bMaxPacketSize0 = 64,
66 .idVendor = cpu_to_le16(0x1d6b),
67 .idProduct = cpu_to_le16(0x0107),
68 .bcdDevice = cpu_to_le16(0x0100),
69 .iManufacturer = AST_VHUB_STR_MANUF,
70 .iProduct = AST_VHUB_STR_PRODUCT,
71 .iSerialNumber = AST_VHUB_STR_SERIAL,
72 .bNumConfigurations = 1,
73 };
74
75 /* Patches to the above when forcing USB1 mode */
ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor * desc)76 static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc)
77 {
78 desc->bcdUSB = cpu_to_le16(0x0100);
79 desc->bDeviceProtocol = 0;
80 }
81
82 /*
83 * Configuration descriptor: same comments as above
84 * regarding handling USB1 mode.
85 */
86
87 /*
88 * We don't use sizeof() as Linux definition of
89 * struct usb_endpoint_descriptor contains 2
90 * extra bytes
91 */
92 #define AST_VHUB_CONF_DESC_SIZE (USB_DT_CONFIG_SIZE + \
93 USB_DT_INTERFACE_SIZE + \
94 USB_DT_ENDPOINT_SIZE)
95
96 static const struct ast_vhub_full_cdesc {
97 struct usb_config_descriptor cfg;
98 struct usb_interface_descriptor intf;
99 struct usb_endpoint_descriptor ep;
100 } __attribute__ ((packed)) ast_vhub_conf_desc = {
101 .cfg = {
102 .bLength = USB_DT_CONFIG_SIZE,
103 .bDescriptorType = USB_DT_CONFIG,
104 .wTotalLength = cpu_to_le16(AST_VHUB_CONF_DESC_SIZE),
105 .bNumInterfaces = 1,
106 .bConfigurationValue = 1,
107 .iConfiguration = 0,
108 .bmAttributes = USB_CONFIG_ATT_ONE |
109 USB_CONFIG_ATT_SELFPOWER |
110 USB_CONFIG_ATT_WAKEUP,
111 .bMaxPower = 0,
112 },
113 .intf = {
114 .bLength = USB_DT_INTERFACE_SIZE,
115 .bDescriptorType = USB_DT_INTERFACE,
116 .bInterfaceNumber = 0,
117 .bAlternateSetting = 0,
118 .bNumEndpoints = 1,
119 .bInterfaceClass = USB_CLASS_HUB,
120 .bInterfaceSubClass = 0,
121 .bInterfaceProtocol = 0,
122 .iInterface = 0,
123 },
124 .ep = {
125 .bLength = USB_DT_ENDPOINT_SIZE,
126 .bDescriptorType = USB_DT_ENDPOINT,
127 .bEndpointAddress = 0x81,
128 .bmAttributes = USB_ENDPOINT_XFER_INT,
129 .wMaxPacketSize = cpu_to_le16(1),
130 .bInterval = 0x0c,
131 },
132 };
133
134 #define AST_VHUB_HUB_DESC_SIZE (USB_DT_HUB_NONVAR_SIZE + 2)
135
136 static const struct usb_hub_descriptor ast_vhub_hub_desc = {
137 .bDescLength = AST_VHUB_HUB_DESC_SIZE,
138 .bDescriptorType = USB_DT_HUB,
139 .bNbrPorts = AST_VHUB_NUM_PORTS,
140 .wHubCharacteristics = cpu_to_le16(HUB_CHAR_NO_LPSM),
141 .bPwrOn2PwrGood = 10,
142 .bHubContrCurrent = 0,
143 .u.hs.DeviceRemovable[0] = 0,
144 .u.hs.DeviceRemovable[1] = 0xff,
145 };
146
147 /*
148 * These strings converted to UTF-16 must be smaller than
149 * our EP0 buffer.
150 */
151 static const struct usb_string ast_vhub_str_array[] = {
152 {
153 .id = AST_VHUB_STR_SERIAL,
154 .s = "00000000"
155 },
156 {
157 .id = AST_VHUB_STR_PRODUCT,
158 .s = "USB Virtual Hub"
159 },
160 {
161 .id = AST_VHUB_STR_MANUF,
162 .s = "Aspeed"
163 },
164 { }
165 };
166
167 static const struct usb_gadget_strings ast_vhub_strings = {
168 .language = 0x0409,
169 .strings = (struct usb_string *)ast_vhub_str_array
170 };
171
ast_vhub_hub_dev_status(struct ast_vhub_ep * ep,u16 wIndex,u16 wValue)172 static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep,
173 u16 wIndex, u16 wValue)
174 {
175 u8 st0;
176
177 EPDBG(ep, "GET_STATUS(dev)\n");
178
179 /*
180 * Mark it as self-powered, I doubt the BMC is powered off
181 * the USB bus ...
182 */
183 st0 = 1 << USB_DEVICE_SELF_POWERED;
184
185 /*
186 * Need to double check how remote wakeup actually works
187 * on that chip and what triggers it.
188 */
189 if (ep->vhub->wakeup_en)
190 st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP;
191
192 return ast_vhub_simple_reply(ep, st0, 0);
193 }
194
ast_vhub_hub_ep_status(struct ast_vhub_ep * ep,u16 wIndex,u16 wValue)195 static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep,
196 u16 wIndex, u16 wValue)
197 {
198 int ep_num;
199 u8 st0 = 0;
200
201 ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
202 EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num);
203
204 /* On the hub we have only EP 0 and 1 */
205 if (ep_num == 1) {
206 if (ep->vhub->ep1_stalled)
207 st0 |= 1 << USB_ENDPOINT_HALT;
208 } else if (ep_num != 0)
209 return std_req_stall;
210
211 return ast_vhub_simple_reply(ep, st0, 0);
212 }
213
ast_vhub_hub_dev_feature(struct ast_vhub_ep * ep,u16 wIndex,u16 wValue,bool is_set)214 static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep,
215 u16 wIndex, u16 wValue,
216 bool is_set)
217 {
218 EPDBG(ep, "%s_FEATURE(dev val=%02x)\n",
219 is_set ? "SET" : "CLEAR", wValue);
220
221 if (wValue != USB_DEVICE_REMOTE_WAKEUP)
222 return std_req_stall;
223
224 ep->vhub->wakeup_en = is_set;
225 EPDBG(ep, "Hub remote wakeup %s\n",
226 is_set ? "enabled" : "disabled");
227
228 return std_req_complete;
229 }
230
ast_vhub_hub_ep_feature(struct ast_vhub_ep * ep,u16 wIndex,u16 wValue,bool is_set)231 static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep,
232 u16 wIndex, u16 wValue,
233 bool is_set)
234 {
235 int ep_num;
236 u32 reg;
237
238 ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
239 EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n",
240 is_set ? "SET" : "CLEAR", ep_num, wValue);
241
242 if (ep_num > 1)
243 return std_req_stall;
244 if (wValue != USB_ENDPOINT_HALT)
245 return std_req_stall;
246 if (ep_num == 0)
247 return std_req_complete;
248
249 EPDBG(ep, "%s stall on EP 1\n",
250 is_set ? "setting" : "clearing");
251
252 ep->vhub->ep1_stalled = is_set;
253 reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL);
254 if (is_set) {
255 reg |= VHUB_EP1_CTRL_STALL;
256 } else {
257 reg &= ~VHUB_EP1_CTRL_STALL;
258 reg |= VHUB_EP1_CTRL_RESET_TOGGLE;
259 }
260 writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL);
261
262 return std_req_complete;
263 }
264
ast_vhub_rep_desc(struct ast_vhub_ep * ep,u8 desc_type,u16 len)265 static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
266 u8 desc_type, u16 len)
267 {
268 size_t dsize;
269
270 EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type);
271
272 /*
273 * Copy first to EP buffer and send from there, so
274 * we can do some in-place patching if needed. We know
275 * the EP buffer is big enough but ensure that doesn't
276 * change. We do that now rather than later after we
277 * have checked sizes etc... to avoid a gcc bug where
278 * it thinks len is constant and barfs about read
279 * overflows in memcpy.
280 */
281 switch(desc_type) {
282 case USB_DT_DEVICE:
283 dsize = USB_DT_DEVICE_SIZE;
284 memcpy(ep->buf, &ast_vhub_dev_desc, dsize);
285 BUILD_BUG_ON(dsize > sizeof(ast_vhub_dev_desc));
286 BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
287 break;
288 case USB_DT_CONFIG:
289 dsize = AST_VHUB_CONF_DESC_SIZE;
290 memcpy(ep->buf, &ast_vhub_conf_desc, dsize);
291 BUILD_BUG_ON(dsize > sizeof(ast_vhub_conf_desc));
292 BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
293 break;
294 case USB_DT_HUB:
295 dsize = AST_VHUB_HUB_DESC_SIZE;
296 memcpy(ep->buf, &ast_vhub_hub_desc, dsize);
297 BUILD_BUG_ON(dsize > sizeof(ast_vhub_hub_desc));
298 BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
299 break;
300 default:
301 return std_req_stall;
302 }
303
304 /* Crop requested length */
305 if (len > dsize)
306 len = dsize;
307
308 /* Patch it if forcing USB1 */
309 if (desc_type == USB_DT_DEVICE && ep->vhub->force_usb1)
310 ast_vhub_patch_dev_desc_usb1(ep->buf);
311
312 /* Shoot it from the EP buffer */
313 return ast_vhub_reply(ep, NULL, len);
314 }
315
ast_vhub_rep_string(struct ast_vhub_ep * ep,u8 string_id,u16 lang_id,u16 len)316 static int ast_vhub_rep_string(struct ast_vhub_ep *ep,
317 u8 string_id, u16 lang_id,
318 u16 len)
319 {
320 int rc = usb_gadget_get_string (&ast_vhub_strings, string_id, ep->buf);
321
322 /*
323 * This should never happen unless we put too big strings in
324 * the array above
325 */
326 BUG_ON(rc >= AST_VHUB_EP0_MAX_PACKET);
327
328 if (rc < 0)
329 return std_req_stall;
330
331 /* Shoot it from the EP buffer */
332 return ast_vhub_reply(ep, NULL, min_t(u16, rc, len));
333 }
334
ast_vhub_std_hub_request(struct ast_vhub_ep * ep,struct usb_ctrlrequest * crq)335 enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
336 struct usb_ctrlrequest *crq)
337 {
338 struct ast_vhub *vhub = ep->vhub;
339 u16 wValue, wIndex, wLength;
340
341 wValue = le16_to_cpu(crq->wValue);
342 wIndex = le16_to_cpu(crq->wIndex);
343 wLength = le16_to_cpu(crq->wLength);
344
345 /* First packet, grab speed */
346 if (vhub->speed == USB_SPEED_UNKNOWN) {
347 u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS);
348 if (ustat & VHUB_USBSTS_HISPEED)
349 vhub->speed = USB_SPEED_HIGH;
350 else
351 vhub->speed = USB_SPEED_FULL;
352 UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat,
353 vhub->speed == USB_SPEED_HIGH ? "high" : "full");
354 }
355
356 switch ((crq->bRequestType << 8) | crq->bRequest) {
357 /* SET_ADDRESS */
358 case DeviceOutRequest | USB_REQ_SET_ADDRESS:
359 EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue);
360 writel(wValue, vhub->regs + AST_VHUB_CONF);
361 return std_req_complete;
362
363 /* GET_STATUS */
364 case DeviceRequest | USB_REQ_GET_STATUS:
365 return ast_vhub_hub_dev_status(ep, wIndex, wValue);
366 case InterfaceRequest | USB_REQ_GET_STATUS:
367 return ast_vhub_simple_reply(ep, 0, 0);
368 case EndpointRequest | USB_REQ_GET_STATUS:
369 return ast_vhub_hub_ep_status(ep, wIndex, wValue);
370
371 /* SET/CLEAR_FEATURE */
372 case DeviceOutRequest | USB_REQ_SET_FEATURE:
373 return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true);
374 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
375 return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false);
376 case EndpointOutRequest | USB_REQ_SET_FEATURE:
377 return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true);
378 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
379 return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false);
380
381 /* GET/SET_CONFIGURATION */
382 case DeviceRequest | USB_REQ_GET_CONFIGURATION:
383 return ast_vhub_simple_reply(ep, 1);
384 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
385 if (wValue != 1)
386 return std_req_stall;
387 return std_req_complete;
388
389 /* GET_DESCRIPTOR */
390 case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
391 switch (wValue >> 8) {
392 case USB_DT_DEVICE:
393 case USB_DT_CONFIG:
394 return ast_vhub_rep_desc(ep, wValue >> 8,
395 wLength);
396 case USB_DT_STRING:
397 return ast_vhub_rep_string(ep, wValue & 0xff,
398 wIndex, wLength);
399 }
400 return std_req_stall;
401
402 /* GET/SET_INTERFACE */
403 case DeviceRequest | USB_REQ_GET_INTERFACE:
404 return ast_vhub_simple_reply(ep, 0);
405 case DeviceOutRequest | USB_REQ_SET_INTERFACE:
406 if (wValue != 0 || wIndex != 0)
407 return std_req_stall;
408 return std_req_complete;
409 }
410 return std_req_stall;
411 }
412
ast_vhub_update_hub_ep1(struct ast_vhub * vhub,unsigned int port)413 static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub,
414 unsigned int port)
415 {
416 /* Update HW EP1 response */
417 u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG);
418 u32 pmask = (1 << (port + 1));
419 if (vhub->ports[port].change)
420 reg |= pmask;
421 else
422 reg &= ~pmask;
423 writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG);
424 }
425
ast_vhub_change_port_stat(struct ast_vhub * vhub,unsigned int port,u16 clr_flags,u16 set_flags,bool set_c)426 static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
427 unsigned int port,
428 u16 clr_flags,
429 u16 set_flags,
430 bool set_c)
431 {
432 struct ast_vhub_port *p = &vhub->ports[port];
433 u16 prev;
434
435 /* Update port status */
436 prev = p->status;
437 p->status = (prev & ~clr_flags) | set_flags;
438 DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n",
439 port + 1, prev, p->status, set_c);
440
441 /* Update change bits if needed */
442 if (set_c) {
443 u16 chg = p->status ^ prev;
444
445 /* Only these are relevant for change */
446 chg &= USB_PORT_STAT_C_CONNECTION |
447 USB_PORT_STAT_C_ENABLE |
448 USB_PORT_STAT_C_SUSPEND |
449 USB_PORT_STAT_C_OVERCURRENT |
450 USB_PORT_STAT_C_RESET |
451 USB_PORT_STAT_C_L1;
452
453 /*
454 * We only set USB_PORT_STAT_C_ENABLE if we are disabling
455 * the port as per USB spec, otherwise MacOS gets upset
456 */
457 if (p->status & USB_PORT_STAT_ENABLE)
458 chg &= ~USB_PORT_STAT_C_ENABLE;
459
460 p->change = chg;
461 ast_vhub_update_hub_ep1(vhub, port);
462 }
463 }
464
ast_vhub_send_host_wakeup(struct ast_vhub * vhub)465 static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub)
466 {
467 u32 reg = readl(vhub->regs + AST_VHUB_CTRL);
468 UDCDBG(vhub, "Waking up host !\n");
469 reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP;
470 writel(reg, vhub->regs + AST_VHUB_CTRL);
471 }
472
ast_vhub_device_connect(struct ast_vhub * vhub,unsigned int port,bool on)473 void ast_vhub_device_connect(struct ast_vhub *vhub,
474 unsigned int port, bool on)
475 {
476 if (on)
477 ast_vhub_change_port_stat(vhub, port, 0,
478 USB_PORT_STAT_CONNECTION, true);
479 else
480 ast_vhub_change_port_stat(vhub, port,
481 USB_PORT_STAT_CONNECTION |
482 USB_PORT_STAT_ENABLE,
483 0, true);
484
485 /*
486 * If the hub is set to wakup the host on connection events
487 * then send a wakeup.
488 */
489 if (vhub->wakeup_en)
490 ast_vhub_send_host_wakeup(vhub);
491 }
492
ast_vhub_wake_work(struct work_struct * work)493 static void ast_vhub_wake_work(struct work_struct *work)
494 {
495 struct ast_vhub *vhub = container_of(work,
496 struct ast_vhub,
497 wake_work);
498 unsigned long flags;
499 unsigned int i;
500
501 /*
502 * Wake all sleeping ports. If a port is suspended by
503 * the host suspend (without explicit state suspend),
504 * we let the normal host wake path deal with it later.
505 */
506 spin_lock_irqsave(&vhub->lock, flags);
507 for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
508 struct ast_vhub_port *p = &vhub->ports[i];
509
510 if (!(p->status & USB_PORT_STAT_SUSPEND))
511 continue;
512 ast_vhub_change_port_stat(vhub, i,
513 USB_PORT_STAT_SUSPEND,
514 0, true);
515 ast_vhub_dev_resume(&p->dev);
516 }
517 ast_vhub_send_host_wakeup(vhub);
518 spin_unlock_irqrestore(&vhub->lock, flags);
519 }
520
ast_vhub_hub_wake_all(struct ast_vhub * vhub)521 void ast_vhub_hub_wake_all(struct ast_vhub *vhub)
522 {
523 /*
524 * A device is trying to wake the world, because this
525 * can recurse into the device, we break the call chain
526 * using a work queue
527 */
528 schedule_work(&vhub->wake_work);
529 }
530
ast_vhub_port_reset(struct ast_vhub * vhub,u8 port)531 static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port)
532 {
533 struct ast_vhub_port *p = &vhub->ports[port];
534 u16 set, clr, speed;
535
536 /* First mark disabled */
537 ast_vhub_change_port_stat(vhub, port,
538 USB_PORT_STAT_ENABLE |
539 USB_PORT_STAT_SUSPEND,
540 USB_PORT_STAT_RESET,
541 false);
542
543 if (!p->dev.driver)
544 return;
545
546 /*
547 * This will either "start" the port or reset the
548 * device if already started...
549 */
550 ast_vhub_dev_reset(&p->dev);
551
552 /* Grab the right speed */
553 speed = p->dev.driver->max_speed;
554 if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed)
555 speed = vhub->speed;
556
557 switch (speed) {
558 case USB_SPEED_LOW:
559 set = USB_PORT_STAT_LOW_SPEED;
560 clr = USB_PORT_STAT_HIGH_SPEED;
561 break;
562 case USB_SPEED_FULL:
563 set = 0;
564 clr = USB_PORT_STAT_LOW_SPEED |
565 USB_PORT_STAT_HIGH_SPEED;
566 break;
567 case USB_SPEED_HIGH:
568 set = USB_PORT_STAT_HIGH_SPEED;
569 clr = USB_PORT_STAT_LOW_SPEED;
570 break;
571 default:
572 UDCDBG(vhub, "Unsupported speed %d when"
573 " connecting device\n",
574 speed);
575 return;
576 }
577 clr |= USB_PORT_STAT_RESET;
578 set |= USB_PORT_STAT_ENABLE;
579
580 /* This should ideally be delayed ... */
581 ast_vhub_change_port_stat(vhub, port, clr, set, true);
582 }
583
ast_vhub_set_port_feature(struct ast_vhub_ep * ep,u8 port,u16 feat)584 static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep,
585 u8 port, u16 feat)
586 {
587 struct ast_vhub *vhub = ep->vhub;
588 struct ast_vhub_port *p;
589
590 if (port == 0 || port > AST_VHUB_NUM_PORTS)
591 return std_req_stall;
592 port--;
593 p = &vhub->ports[port];
594
595 switch(feat) {
596 case USB_PORT_FEAT_SUSPEND:
597 if (!(p->status & USB_PORT_STAT_ENABLE))
598 return std_req_complete;
599 ast_vhub_change_port_stat(vhub, port,
600 0, USB_PORT_STAT_SUSPEND,
601 false);
602 ast_vhub_dev_suspend(&p->dev);
603 return std_req_complete;
604 case USB_PORT_FEAT_RESET:
605 EPDBG(ep, "Port reset !\n");
606 ast_vhub_port_reset(vhub, port);
607 return std_req_complete;
608 case USB_PORT_FEAT_POWER:
609 /*
610 * On Power-on, we mark the connected flag changed,
611 * if there's a connected device, some hosts will
612 * otherwise fail to detect it.
613 */
614 if (p->status & USB_PORT_STAT_CONNECTION) {
615 p->change |= USB_PORT_STAT_C_CONNECTION;
616 ast_vhub_update_hub_ep1(vhub, port);
617 }
618 return std_req_complete;
619 case USB_PORT_FEAT_TEST:
620 case USB_PORT_FEAT_INDICATOR:
621 /* We don't do anything with these */
622 return std_req_complete;
623 }
624 return std_req_stall;
625 }
626
ast_vhub_clr_port_feature(struct ast_vhub_ep * ep,u8 port,u16 feat)627 static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep,
628 u8 port, u16 feat)
629 {
630 struct ast_vhub *vhub = ep->vhub;
631 struct ast_vhub_port *p;
632
633 if (port == 0 || port > AST_VHUB_NUM_PORTS)
634 return std_req_stall;
635 port--;
636 p = &vhub->ports[port];
637
638 switch(feat) {
639 case USB_PORT_FEAT_ENABLE:
640 ast_vhub_change_port_stat(vhub, port,
641 USB_PORT_STAT_ENABLE |
642 USB_PORT_STAT_SUSPEND, 0,
643 false);
644 ast_vhub_dev_suspend(&p->dev);
645 return std_req_complete;
646 case USB_PORT_FEAT_SUSPEND:
647 if (!(p->status & USB_PORT_STAT_SUSPEND))
648 return std_req_complete;
649 ast_vhub_change_port_stat(vhub, port,
650 USB_PORT_STAT_SUSPEND, 0,
651 false);
652 ast_vhub_dev_resume(&p->dev);
653 return std_req_complete;
654 case USB_PORT_FEAT_POWER:
655 /* We don't do power control */
656 return std_req_complete;
657 case USB_PORT_FEAT_INDICATOR:
658 /* We don't have indicators */
659 return std_req_complete;
660 case USB_PORT_FEAT_C_CONNECTION:
661 case USB_PORT_FEAT_C_ENABLE:
662 case USB_PORT_FEAT_C_SUSPEND:
663 case USB_PORT_FEAT_C_OVER_CURRENT:
664 case USB_PORT_FEAT_C_RESET:
665 /* Clear state-change feature */
666 p->change &= ~(1u << (feat - 16));
667 ast_vhub_update_hub_ep1(vhub, port);
668 return std_req_complete;
669 }
670 return std_req_stall;
671 }
672
ast_vhub_get_port_stat(struct ast_vhub_ep * ep,u8 port)673 static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep,
674 u8 port)
675 {
676 struct ast_vhub *vhub = ep->vhub;
677 u16 stat, chg;
678
679 if (port == 0 || port > AST_VHUB_NUM_PORTS)
680 return std_req_stall;
681 port--;
682
683 stat = vhub->ports[port].status;
684 chg = vhub->ports[port].change;
685
686 /* We always have power */
687 stat |= USB_PORT_STAT_POWER;
688
689 EPDBG(ep, " port status=%04x change=%04x\n", stat, chg);
690
691 return ast_vhub_simple_reply(ep,
692 stat & 0xff,
693 stat >> 8,
694 chg & 0xff,
695 chg >> 8);
696 }
697
ast_vhub_class_hub_request(struct ast_vhub_ep * ep,struct usb_ctrlrequest * crq)698 enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
699 struct usb_ctrlrequest *crq)
700 {
701 u16 wValue, wIndex, wLength;
702
703 wValue = le16_to_cpu(crq->wValue);
704 wIndex = le16_to_cpu(crq->wIndex);
705 wLength = le16_to_cpu(crq->wLength);
706
707 switch ((crq->bRequestType << 8) | crq->bRequest) {
708 case GetHubStatus:
709 EPDBG(ep, "GetHubStatus\n");
710 return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
711 case GetPortStatus:
712 EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff);
713 return ast_vhub_get_port_stat(ep, wIndex & 0xf);
714 case GetHubDescriptor:
715 if (wValue != (USB_DT_HUB << 8))
716 return std_req_stall;
717 EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff);
718 return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength);
719 case SetHubFeature:
720 case ClearHubFeature:
721 EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue);
722 /* No feature, just complete the requests */
723 if (wValue == C_HUB_LOCAL_POWER ||
724 wValue == C_HUB_OVER_CURRENT)
725 return std_req_complete;
726 return std_req_stall;
727 case SetPortFeature:
728 EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
729 return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue);
730 case ClearPortFeature:
731 EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
732 return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue);
733 case ClearTTBuffer:
734 case ResetTT:
735 case StopTT:
736 return std_req_complete;
737 case GetTTState:
738 return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
739 default:
740 EPDBG(ep, "Unknown class request\n");
741 }
742 return std_req_stall;
743 }
744
ast_vhub_hub_suspend(struct ast_vhub * vhub)745 void ast_vhub_hub_suspend(struct ast_vhub *vhub)
746 {
747 unsigned int i;
748
749 UDCDBG(vhub, "USB bus suspend\n");
750
751 if (vhub->suspended)
752 return;
753
754 vhub->suspended = true;
755
756 /*
757 * Forward to unsuspended ports without changing
758 * their connection status.
759 */
760 for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
761 struct ast_vhub_port *p = &vhub->ports[i];
762
763 if (!(p->status & USB_PORT_STAT_SUSPEND))
764 ast_vhub_dev_suspend(&p->dev);
765 }
766 }
767
ast_vhub_hub_resume(struct ast_vhub * vhub)768 void ast_vhub_hub_resume(struct ast_vhub *vhub)
769 {
770 unsigned int i;
771
772 UDCDBG(vhub, "USB bus resume\n");
773
774 if (!vhub->suspended)
775 return;
776
777 vhub->suspended = false;
778
779 /*
780 * Forward to unsuspended ports without changing
781 * their connection status.
782 */
783 for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
784 struct ast_vhub_port *p = &vhub->ports[i];
785
786 if (!(p->status & USB_PORT_STAT_SUSPEND))
787 ast_vhub_dev_resume(&p->dev);
788 }
789 }
790
ast_vhub_hub_reset(struct ast_vhub * vhub)791 void ast_vhub_hub_reset(struct ast_vhub *vhub)
792 {
793 unsigned int i;
794
795 UDCDBG(vhub, "USB bus reset\n");
796
797 /*
798 * Is the speed known ? If not we don't care, we aren't
799 * initialized yet and ports haven't been enabled.
800 */
801 if (vhub->speed == USB_SPEED_UNKNOWN)
802 return;
803
804 /* We aren't suspended anymore obviously */
805 vhub->suspended = false;
806
807 /* No speed set */
808 vhub->speed = USB_SPEED_UNKNOWN;
809
810 /* Wakeup not enabled anymore */
811 vhub->wakeup_en = false;
812
813 /*
814 * Clear all port status, disable gadgets and "suspend"
815 * them. They will be woken up by a port reset.
816 */
817 for (i = 0; i < AST_VHUB_NUM_PORTS; i++) {
818 struct ast_vhub_port *p = &vhub->ports[i];
819
820 /* Only keep the connected flag */
821 p->status &= USB_PORT_STAT_CONNECTION;
822 p->change = 0;
823
824 /* Suspend the gadget if any */
825 ast_vhub_dev_suspend(&p->dev);
826 }
827
828 /* Cleanup HW */
829 writel(0, vhub->regs + AST_VHUB_CONF);
830 writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
831 writel(VHUB_EP1_CTRL_RESET_TOGGLE |
832 VHUB_EP1_CTRL_ENABLE,
833 vhub->regs + AST_VHUB_EP1_CTRL);
834 writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
835 }
836
ast_vhub_init_hub(struct ast_vhub * vhub)837 void ast_vhub_init_hub(struct ast_vhub *vhub)
838 {
839 vhub->speed = USB_SPEED_UNKNOWN;
840 INIT_WORK(&vhub->wake_work, ast_vhub_wake_work);
841 }
842
843