1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * PCI searching functions
4 *
5 * Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter,
6 * David Mosberger-Tang
7 * Copyright (C) 1997 -- 2000 Martin Mares <mj@ucw.cz>
8 * Copyright (C) 2003 -- 2004 Greg Kroah-Hartman <greg@kroah.com>
9 */
10
11 #include <linux/pci.h>
12 #include <linux/slab.h>
13 #include <linux/module.h>
14 #include <linux/interrupt.h>
15 #include "pci.h"
16
17 DECLARE_RWSEM(pci_bus_sem);
18
19 /*
20 * pci_for_each_dma_alias - Iterate over DMA aliases for a device
21 * @pdev: starting downstream device
22 * @fn: function to call for each alias
23 * @data: opaque data to pass to @fn
24 *
25 * Starting @pdev, walk up the bus calling @fn for each possible alias
26 * of @pdev at the root bus.
27 */
pci_for_each_dma_alias(struct pci_dev * pdev,int (* fn)(struct pci_dev * pdev,u16 alias,void * data),void * data)28 int pci_for_each_dma_alias(struct pci_dev *pdev,
29 int (*fn)(struct pci_dev *pdev,
30 u16 alias, void *data), void *data)
31 {
32 struct pci_bus *bus;
33 int ret;
34
35 ret = fn(pdev, pci_dev_id(pdev), data);
36 if (ret)
37 return ret;
38
39 /*
40 * If the device is broken and uses an alias requester ID for
41 * DMA, iterate over that too.
42 */
43 if (unlikely(pdev->dma_alias_mask)) {
44 u8 devfn;
45
46 for_each_set_bit(devfn, pdev->dma_alias_mask, U8_MAX) {
47 ret = fn(pdev, PCI_DEVID(pdev->bus->number, devfn),
48 data);
49 if (ret)
50 return ret;
51 }
52 }
53
54 for (bus = pdev->bus; !pci_is_root_bus(bus); bus = bus->parent) {
55 struct pci_dev *tmp;
56
57 /* Skip virtual buses */
58 if (!bus->self)
59 continue;
60
61 tmp = bus->self;
62
63 /* stop at bridge where translation unit is associated */
64 if (tmp->dev_flags & PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT)
65 return ret;
66
67 /*
68 * PCIe-to-PCI/X bridges alias transactions from downstream
69 * devices using the subordinate bus number (PCI Express to
70 * PCI/PCI-X Bridge Spec, rev 1.0, sec 2.3). For all cases
71 * where the upstream bus is PCI/X we alias to the bridge
72 * (there are various conditions in the previous reference
73 * where the bridge may take ownership of transactions, even
74 * when the secondary interface is PCI-X).
75 */
76 if (pci_is_pcie(tmp)) {
77 switch (pci_pcie_type(tmp)) {
78 case PCI_EXP_TYPE_ROOT_PORT:
79 case PCI_EXP_TYPE_UPSTREAM:
80 case PCI_EXP_TYPE_DOWNSTREAM:
81 continue;
82 case PCI_EXP_TYPE_PCI_BRIDGE:
83 ret = fn(tmp,
84 PCI_DEVID(tmp->subordinate->number,
85 PCI_DEVFN(0, 0)), data);
86 if (ret)
87 return ret;
88 continue;
89 case PCI_EXP_TYPE_PCIE_BRIDGE:
90 ret = fn(tmp, pci_dev_id(tmp), data);
91 if (ret)
92 return ret;
93 continue;
94 }
95 } else {
96 if (tmp->dev_flags & PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS)
97 ret = fn(tmp,
98 PCI_DEVID(tmp->subordinate->number,
99 PCI_DEVFN(0, 0)), data);
100 else
101 ret = fn(tmp, pci_dev_id(tmp), data);
102 if (ret)
103 return ret;
104 }
105 }
106
107 return ret;
108 }
109
pci_do_find_bus(struct pci_bus * bus,unsigned char busnr)110 static struct pci_bus *pci_do_find_bus(struct pci_bus *bus, unsigned char busnr)
111 {
112 struct pci_bus *child;
113 struct pci_bus *tmp;
114
115 if (bus->number == busnr)
116 return bus;
117
118 list_for_each_entry(tmp, &bus->children, node) {
119 child = pci_do_find_bus(tmp, busnr);
120 if (child)
121 return child;
122 }
123 return NULL;
124 }
125
126 /**
127 * pci_find_bus - locate PCI bus from a given domain and bus number
128 * @domain: number of PCI domain to search
129 * @busnr: number of desired PCI bus
130 *
131 * Given a PCI bus number and domain number, the desired PCI bus is located
132 * in the global list of PCI buses. If the bus is found, a pointer to its
133 * data structure is returned. If no bus is found, %NULL is returned.
134 */
pci_find_bus(int domain,int busnr)135 struct pci_bus *pci_find_bus(int domain, int busnr)
136 {
137 struct pci_bus *bus = NULL;
138 struct pci_bus *tmp_bus;
139
140 while ((bus = pci_find_next_bus(bus)) != NULL) {
141 if (pci_domain_nr(bus) != domain)
142 continue;
143 tmp_bus = pci_do_find_bus(bus, busnr);
144 if (tmp_bus)
145 return tmp_bus;
146 }
147 return NULL;
148 }
149 EXPORT_SYMBOL(pci_find_bus);
150
151 /**
152 * pci_find_next_bus - begin or continue searching for a PCI bus
153 * @from: Previous PCI bus found, or %NULL for new search.
154 *
155 * Iterates through the list of known PCI buses. A new search is
156 * initiated by passing %NULL as the @from argument. Otherwise if
157 * @from is not %NULL, searches continue from next device on the
158 * global list.
159 */
pci_find_next_bus(const struct pci_bus * from)160 struct pci_bus *pci_find_next_bus(const struct pci_bus *from)
161 {
162 struct list_head *n;
163 struct pci_bus *b = NULL;
164
165 WARN_ON(in_interrupt());
166 down_read(&pci_bus_sem);
167 n = from ? from->node.next : pci_root_buses.next;
168 if (n != &pci_root_buses)
169 b = list_entry(n, struct pci_bus, node);
170 up_read(&pci_bus_sem);
171 return b;
172 }
173 EXPORT_SYMBOL(pci_find_next_bus);
174
175 /**
176 * pci_get_slot - locate PCI device for a given PCI slot
177 * @bus: PCI bus on which desired PCI device resides
178 * @devfn: encodes number of PCI slot in which the desired PCI
179 * device resides and the logical device number within that slot
180 * in case of multi-function devices.
181 *
182 * Given a PCI bus and slot/function number, the desired PCI device
183 * is located in the list of PCI devices.
184 * If the device is found, its reference count is increased and this
185 * function returns a pointer to its data structure. The caller must
186 * decrement the reference count by calling pci_dev_put().
187 * If no device is found, %NULL is returned.
188 */
pci_get_slot(struct pci_bus * bus,unsigned int devfn)189 struct pci_dev *pci_get_slot(struct pci_bus *bus, unsigned int devfn)
190 {
191 struct pci_dev *dev;
192
193 WARN_ON(in_interrupt());
194 down_read(&pci_bus_sem);
195
196 list_for_each_entry(dev, &bus->devices, bus_list) {
197 if (dev->devfn == devfn)
198 goto out;
199 }
200
201 dev = NULL;
202 out:
203 pci_dev_get(dev);
204 up_read(&pci_bus_sem);
205 return dev;
206 }
207 EXPORT_SYMBOL(pci_get_slot);
208
209 /**
210 * pci_get_domain_bus_and_slot - locate PCI device for a given PCI domain (segment), bus, and slot
211 * @domain: PCI domain/segment on which the PCI device resides.
212 * @bus: PCI bus on which desired PCI device resides
213 * @devfn: encodes number of PCI slot in which the desired PCI device
214 * resides and the logical device number within that slot in case of
215 * multi-function devices.
216 *
217 * Given a PCI domain, bus, and slot/function number, the desired PCI
218 * device is located in the list of PCI devices. If the device is
219 * found, its reference count is increased and this function returns a
220 * pointer to its data structure. The caller must decrement the
221 * reference count by calling pci_dev_put(). If no device is found,
222 * %NULL is returned.
223 */
pci_get_domain_bus_and_slot(int domain,unsigned int bus,unsigned int devfn)224 struct pci_dev *pci_get_domain_bus_and_slot(int domain, unsigned int bus,
225 unsigned int devfn)
226 {
227 struct pci_dev *dev = NULL;
228
229 for_each_pci_dev(dev) {
230 if (pci_domain_nr(dev->bus) == domain &&
231 (dev->bus->number == bus && dev->devfn == devfn))
232 return dev;
233 }
234 return NULL;
235 }
236 EXPORT_SYMBOL(pci_get_domain_bus_and_slot);
237
match_pci_dev_by_id(struct device * dev,const void * data)238 static int match_pci_dev_by_id(struct device *dev, const void *data)
239 {
240 struct pci_dev *pdev = to_pci_dev(dev);
241 const struct pci_device_id *id = data;
242
243 if (pci_match_one_device(id, pdev))
244 return 1;
245 return 0;
246 }
247
248 /*
249 * pci_get_dev_by_id - begin or continue searching for a PCI device by id
250 * @id: pointer to struct pci_device_id to match for the device
251 * @from: Previous PCI device found in search, or %NULL for new search.
252 *
253 * Iterates through the list of known PCI devices. If a PCI device is found
254 * with a matching id a pointer to its device structure is returned, and the
255 * reference count to the device is incremented. Otherwise, %NULL is returned.
256 * A new search is initiated by passing %NULL as the @from argument. Otherwise
257 * if @from is not %NULL, searches continue from next device on the global
258 * list. The reference count for @from is always decremented if it is not
259 * %NULL.
260 *
261 * This is an internal function for use by the other search functions in
262 * this file.
263 */
pci_get_dev_by_id(const struct pci_device_id * id,struct pci_dev * from)264 static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
265 struct pci_dev *from)
266 {
267 struct device *dev;
268 struct device *dev_start = NULL;
269 struct pci_dev *pdev = NULL;
270
271 WARN_ON(in_interrupt());
272 if (from)
273 dev_start = &from->dev;
274 dev = bus_find_device(&pci_bus_type, dev_start, (void *)id,
275 match_pci_dev_by_id);
276 if (dev)
277 pdev = to_pci_dev(dev);
278 pci_dev_put(from);
279 return pdev;
280 }
281
282 /**
283 * pci_get_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
284 * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
285 * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
286 * @ss_vendor: PCI subsystem vendor id to match, or %PCI_ANY_ID to match all vendor ids
287 * @ss_device: PCI subsystem device id to match, or %PCI_ANY_ID to match all device ids
288 * @from: Previous PCI device found in search, or %NULL for new search.
289 *
290 * Iterates through the list of known PCI devices. If a PCI device is found
291 * with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its
292 * device structure is returned, and the reference count to the device is
293 * incremented. Otherwise, %NULL is returned. A new search is initiated by
294 * passing %NULL as the @from argument. Otherwise if @from is not %NULL,
295 * searches continue from next device on the global list.
296 * The reference count for @from is always decremented if it is not %NULL.
297 */
pci_get_subsys(unsigned int vendor,unsigned int device,unsigned int ss_vendor,unsigned int ss_device,struct pci_dev * from)298 struct pci_dev *pci_get_subsys(unsigned int vendor, unsigned int device,
299 unsigned int ss_vendor, unsigned int ss_device,
300 struct pci_dev *from)
301 {
302 struct pci_device_id id = {
303 .vendor = vendor,
304 .device = device,
305 .subvendor = ss_vendor,
306 .subdevice = ss_device,
307 };
308
309 return pci_get_dev_by_id(&id, from);
310 }
311 EXPORT_SYMBOL(pci_get_subsys);
312
313 /**
314 * pci_get_device - begin or continue searching for a PCI device by vendor/device id
315 * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
316 * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
317 * @from: Previous PCI device found in search, or %NULL for new search.
318 *
319 * Iterates through the list of known PCI devices. If a PCI device is
320 * found with a matching @vendor and @device, the reference count to the
321 * device is incremented and a pointer to its device structure is returned.
322 * Otherwise, %NULL is returned. A new search is initiated by passing %NULL
323 * as the @from argument. Otherwise if @from is not %NULL, searches continue
324 * from next device on the global list. The reference count for @from is
325 * always decremented if it is not %NULL.
326 */
pci_get_device(unsigned int vendor,unsigned int device,struct pci_dev * from)327 struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
328 struct pci_dev *from)
329 {
330 return pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
331 }
332 EXPORT_SYMBOL(pci_get_device);
333
334 /**
335 * pci_get_class - begin or continue searching for a PCI device by class
336 * @class: search for a PCI device with this class designation
337 * @from: Previous PCI device found in search, or %NULL for new search.
338 *
339 * Iterates through the list of known PCI devices. If a PCI device is
340 * found with a matching @class, the reference count to the device is
341 * incremented and a pointer to its device structure is returned.
342 * Otherwise, %NULL is returned.
343 * A new search is initiated by passing %NULL as the @from argument.
344 * Otherwise if @from is not %NULL, searches continue from next device
345 * on the global list. The reference count for @from is always decremented
346 * if it is not %NULL.
347 */
pci_get_class(unsigned int class,struct pci_dev * from)348 struct pci_dev *pci_get_class(unsigned int class, struct pci_dev *from)
349 {
350 struct pci_device_id id = {
351 .vendor = PCI_ANY_ID,
352 .device = PCI_ANY_ID,
353 .subvendor = PCI_ANY_ID,
354 .subdevice = PCI_ANY_ID,
355 .class_mask = PCI_ANY_ID,
356 .class = class,
357 };
358
359 return pci_get_dev_by_id(&id, from);
360 }
361 EXPORT_SYMBOL(pci_get_class);
362
363 /**
364 * pci_dev_present - Returns 1 if device matching the device list is present, 0 if not.
365 * @ids: A pointer to a null terminated list of struct pci_device_id structures
366 * that describe the type of PCI device the caller is trying to find.
367 *
368 * Obvious fact: You do not have a reference to any device that might be found
369 * by this function, so if that device is removed from the system right after
370 * this function is finished, the value will be stale. Use this function to
371 * find devices that are usually built into a system, or for a general hint as
372 * to if another device happens to be present at this specific moment in time.
373 */
pci_dev_present(const struct pci_device_id * ids)374 int pci_dev_present(const struct pci_device_id *ids)
375 {
376 struct pci_dev *found = NULL;
377
378 WARN_ON(in_interrupt());
379 while (ids->vendor || ids->subvendor || ids->class_mask) {
380 found = pci_get_dev_by_id(ids, NULL);
381 if (found) {
382 pci_dev_put(found);
383 return 1;
384 }
385 ids++;
386 }
387
388 return 0;
389 }
390 EXPORT_SYMBOL(pci_dev_present);
391