| /Documentation/devicetree/bindings/iio/frequency/ |
| D | adf4350.txt | 5 * "adi,adf4350": When using the ADF4350 device
6 * "adi,adf4351": When using the ADF4351 device
15 - adi,channel-spacing: Channel spacing in Hz (influences MODULUS).
16 - adi,power-up-frequency: If set in Hz the PLL tunes to
18 - adi,reference-div-factor: If set the driver skips dynamic calculation
20 - adi,reference-doubler-enable: Enables reference doubler.
21 - adi,reference-div2-enable: Enables reference divider.
22 - adi,phase-detector-polarity-positive-enable: Enables positive phase
24 - adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision.
26 - adi,lock-detect-function-integer-n-enable: Enables lock detect
[all …]
|
| /Documentation/devicetree/bindings/iio/dac/ |
| D | ad5755.txt | 5 adi,ad5755
6 adi,ad5755-1
7 adi,ad5757
8 adi,ad5735
9 adi,ad5737
20 - adi,ext-dc-dc-compenstation-resistor: boolean set if the hardware have an
23 - adi,dc-dc-phase:
32 - adi,dc-dc-freq-hz:
37 - adi,dc-dc-max-microvolt:
46 - adi,mode:
[all …]
|
| D | ad5592r.txt | 4 - compatible: Must be "adi,ad5592r"
10 - compatible: Must be "adi,ad5593r"
20 * adi,mode: Mode or function of this channel.
22 can be found in <dt-bindings/iio/adi,ad5592r.h>.
36 * adi,off-state: State of this channel when unused or the
39 <dt-bindings/iio/adi,ad5592r.h>.
60 #include <dt-bindings/iio/adi,ad5592r.h>
74 compatible = "adi,ad5592r";
86 adi,mode = <CH_MODE_DAC>;
90 adi,mode = <CH_MODE_ADC>;
[all …]
|
| D | ad5758.txt | 4 - compatible: Must be "adi,ad5758"
11 - adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
36 - adi,range-microvolt: Voltage output range
42 - adi,range-microamp: Current output range
56 - adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
65 - adi,slew-time-us: The time it takes for the output to reach the
72 compatible = "adi,ad5758";
79 adi,dc-dc-mode = <2>;
80 adi,range-microvolt = <0 10000000>;
81 adi,dc-dc-ilim-microamp = <200000>;
[all …]
|
| /Documentation/devicetree/bindings/input/touchscreen/ |
| D | ad7879.txt | 4 - compatible : for SPI slave, use "adi,ad7879"
5 for I2C slave, use "adi,ad7879-1"
10 - adi,resistance-plate-x : total resistance of X-plate (for pressure
14 - adi,first-conversion-delay : 0-12: In 128us steps (starting with 128us)
19 - adi,acquisition-time : 0: 2us
24 - adi,median-filter-size : 0: disabled
29 - adi,averaging : 0: 2 middle values (1 if median disabled)
34 - adi,conversion-interval: : 0 : convert one time only
42 compatible = "adi,ad7879-1";
47 adi,resistance-plate-x = <120>;
[all …]
|
| /Documentation/devicetree/bindings/media/i2c/ |
| D | adv7180.txt | 8 "adi,adv7180"
9 "adi,adv7180cp"
10 "adi,adv7180st"
11 "adi,adv7182"
12 "adi,adv7280"
13 "adi,adv7280-m"
14 "adi,adv7281"
15 "adi,adv7281-m"
16 "adi,adv7281-ma"
17 "adi,adv7282"
[all …]
|
| D | adv7343.txt | 10 - compatible: Must be "adi,adv7343"
13 - adi,power-mode-sleep-mode: on enable the current consumption is reduced to
16 - adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
33 compatible = "adi,adv7343";
38 adi,power-mode-sleep-mode;
39 adi,power-mode-pll-ctrl;
41 adi,dac-enable = <1 1 1 0 0 1>;
43 adi,sd-dac-enable = <1 0>;
|
| /Documentation/devicetree/bindings/spi/ |
| D | spi-sprd-adi.txt | 1 Spreadtrum ADI controller
3 ADI is the abbreviation of Anolog-Digital interface, which is used to access
4 analog chip (such as PMIC) from digital chip. ADI controller follows the SPI
8 ADI controller has 50 channels including 2 software read/write channels and
10 users should set ADI registers to access analog chip. For hardware channels,
14 triggered by hardware components instead of ADI software channels.
21 Since we have multi-subsystems will use unique ADI to access analog chip, when
22 one system is reading/writing data by ADI software channels, that should be under
24 data by ADI software channels at the same time, or two parallel routine of setting
25 ADI registers will make ADI controller registers chaos to lead incorrect results.
[all …]
|
| /Documentation/devicetree/bindings/dma/ |
| D | adi,axi-dmac.txt | 4 - compatible: Must be "adi,axi-dmac-1.00.a".
11 - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
15 Required properties for adi,channels sub-node:
21 - adi,source-bus-width,
22 adi,destination-bus-width: Width of the source or destination bus in bits.
23 - adi,source-bus-type,
24 adi,destination-bus-type: Type of the source or destination bus. Must be one
31 - adi,length-width: Width of the DMA transfer length register.
32 - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
34 - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
[all …]
|
| /Documentation/devicetree/bindings/hwmon/ |
| D | adm1275.txt | 5 - "adi,adm1075" for adm1075
6 - "adi,adm1272" for adm1272
7 - "adi,adm1275" for adm1275
8 - "adi,adm1276" for adm1276
9 - "adi,adm1278" for adm1278
10 - "adi,adm1293" for adm1293
11 - "adi,adm1294" for adm1294
22 compatible = "adi,adm1272";
|
| D | ad741x.txt | 5 "adi,ad7416"
6 "adi,ad7417"
7 "adi,ad7418"
13 compatible = "adi,ad7418";
|
| /Documentation/devicetree/bindings/iio/adc/ |
| D | adi,ad7606.yaml | 4 $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
22 - adi,ad7605-4
23 - adi,ad7606-8
24 - adi,ad7606-6
25 - adi,ad7606-4
26 - adi,ad7606b
27 - adi,ad7616
42 adi,conversion-start-gpios:
65 adi,first-data-gpios:
73 adi,range-gpios:
[all …]
|
| D | adi,ad7192.yaml | 5 $id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7192.yaml#
21 - adi,ad7190
22 - adi,ad7192
23 - adi,ad7193
24 - adi,ad7195
50 adi,rejection-60-Hz-enable:
58 adi,refin2-pins-enable:
63 adi,buffer-enable:
72 adi,burnout-currents-enable:
102 compatible = "adi,ad7192";
[all …]
|
| D | adi,ad7780.yaml | 4 $id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
31 - adi,ad7170
32 - adi,ad7171
33 - adi,ad7780
34 - adi,ad7781
51 adi,gain-gpios:
59 adi,filter-gpios:
79 compatible = "adi,ad7780";
84 adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
85 adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
|
| D | adi,ad7124.yaml | 5 $id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml#
21 - adi,ad7124-4
22 - adi,ad7124-8
81 adi,reference-select:
103 adi,buffered-positive:
107 adi,buffered-negative:
122 compatible = "adi,ad7124-4";
137 adi,reference-select = <0>;
138 adi,buffered-positive;
145 adi,reference-select = <0>;
[all …]
|
| D | ad7949.txt | 5 * "adi,ad7949"
6 * "adi,ad7682"
7 * "adi,ad7689"
13 compatible = "adi,ad7949";
|
| /Documentation/sparc/ |
| D | adi.rst | 2 Application Data Integrity (ADI)
5 SPARC M7 processor adds the Application Data Integrity (ADI) feature.
6 ADI allows a task to set version tags on any subset of its address
7 space. Once ADI is enabled and version tags are set for ranges of
14 Following steps must be taken by a task to enable ADI fully:
17 the task's entire address space to enable/disable ADI for the task.
20 addresses ADI is being enabled on. MMU checks the version tag only
25 given tag for one ADI block size number of bytes. This step must
28 ADI block size for the platform is provided by the hypervisor to kernel
32 physical memory and the same tag must be present in the ADI version tag
[all …]
|
| /Documentation/devicetree/bindings/sound/ |
| D | adi,adau17x1.txt | 6 "adi,adau1361"
7 "adi,adau1461"
8 "adi,adau1761"
9 "adi,adau1961"
10 "adi,adau1381"
11 "adi,adau1781"
26 compatible = "adi,adau1761";
|
| D | adi,adau1701.txt | 5 - compatible: Should contain "adi,adau1701"
14 - adi,pll-mode-gpios: An array of two GPIO specs to describe the GPIOs
19 - adi,pin-config: An array of 12 numerical values selecting one of the
30 compatible = "adi,adau1701";
35 adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
36 adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
|
| D | adi,ssm2602.txt | 9 - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604"
17 compatible = "adi,ssm2602";
|
| D | adi,adau1977.txt | 12 "adi,adau1977"
13 "adi,adau1978"
14 "adi,adau1979"
26 - adi,micbias: configures the voltage setting for the MICBIAS pin.
43 compatible = "adi,adau1977";
49 adi,micbias = <3>;
54 compatible = "adi,adau1977";
|
| /Documentation/devicetree/bindings/iio/imu/ |
| D | adi,adis16480.txt | 7 * "adi,adis16375"
8 * "adi,adis16480"
9 * "adi,adis16485"
10 * "adi,adis16488"
11 * "adi,adis16495-1"
12 * "adi,adis16495-2"
13 * "adi,adis16495-3"
14 * "adi,adis16497-1"
15 * "adi,adis16497-2"
16 * "adi,adis16497-3"
[all …]
|
| /Documentation/devicetree/bindings/display/bridge/ |
| D | adi,adv7511.txt | 12 "adi,adv7511"
13 "adi,adv7511w"
14 "adi,adv7513"
15 "adi,adv7533"
31 - adi,input-depth: Number of bits per color component at the input (8, 10 or
33 - adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
35 - adi,input-clock: The input clock type, one of "1x" (one clock cycle per
42 - adi,input-style: The input components arrangement variant (1, 2 or 3), as
44 - adi,input-justification: The input bit justification ("left", "evenly",
57 - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
[all …]
|
| /Documentation/devicetree/bindings/iio/potentiometer/ |
| D | ad5272.txt | 12 adi,ad5272-020
13 adi,ad5272-050
14 adi,ad5272-100
15 adi,ad5274-020
16 adi,ad5274-100
25 compatible = "adi,ad5272-020";
|
| /Documentation/devicetree/bindings/net/ |
| D | adi,adin.yaml | 4 $id: http://devicetree.org/schemas/net/adi,adin.yaml#
19 adi,rx-internal-delay-ps:
26 adi,tx-internal-delay-ps:
33 adi,fifo-depth-bits:
50 adi,rx-internal-delay-ps = <1800>;
51 adi,tx-internal-delay-ps = <2200>;
64 adi,fifo-depth-bits = <16>;
|