Searched full:determined (Results 1 – 25 of 204) sorted by relevance
123456789
19 register, not the actual frequency. The frequency is determined by the following.40 0 = Adapt to Volume Mode. Voltage level determined by the sum of the relevant volume settings.43 3 = Adapted to Signal; Voltage level is dynamically determined by the output signal.
16 register, not the actual frequency. The frequency is determined by the following.
22 2) After you've determined the minimum size of the calling27 determined above and allocated.
9 criteria for optimal gain is determined by the sensor.
59 The default address is determined by the `ip' parameter104 Default: Determined using autoconfiguration.117 Default: Determined using autoconfiguration.122 Default: Determined using autoconfiguration.128 Default: Determined using autoconfiguration.143 Otherwise the device is determined using176 Default: None if not using autoconfiguration; determined186 Default: None if not using autoconfiguration; determined
42 Support for SME and SEV can be determined through the CPUID instruction. The70 Linux relies on BIOS to set this bit if BIOS has determined that the reduction79 The CPU supports SME (determined through CPUID instruction).
5 between poweroff and restart is determined by unique power manager IC
14 "pmic-arbiter". The type chosen is determined by the attached
16 The layout of the registers & properties of the display are determined
11 - stmp,crystal-freq: override crystal frequency as determined from fuse bits.
16 In principle the location of a swap file's header may be determined with the43 and <swap_file_offset> is the offset of the swap header determined by the
42 determined by the current video input. Drivers must support both ioctls75 is more than one at all. The modulator is solely determined by the
49 output device) and can be determined with the67 implemented on the TV card all other parameters are determined by the302 - Use chroma-keying. The chroma-key color is determined by the321 determined by the ``global_alpha`` field of struct335 determined by the ``chromakey`` field of struct
12 the opposite level disables the WDT. Active level is determined
23 default timeout is determined by the driver
19 The MAC address will be determined using the optional properties
15 The MAC address will be determined using the optional properties
10 The MAC address will be determined using the optional properties
42 by the FXEN boot strapping pin. It can't be determined from the PHY
16 The exact number of interrupts is determined from the compatible
18 determined by the clock-names property.
38 The MAC address will be determined using the optional properties defined in
11 Which profile to write is determined by the profile number35 Which profile to write is determined by the profile number
12 uniquely determined by the enumeration address containing 4 fields:
25 be used. In the latter case the child devices will be determined by the