Searched full:v8 (Results 1 – 17 of 17) sorted by relevance
| /Documentation/hwmon/ |
| D | lochnagar.rst | 33 in1_input Measured voltage for 1V8 DSP (milliVolts)
34 in1_label "1V8 DSP"
35 curr2_input Measured current for 1V8 DSP (milliAmps)
36 curr2_label "1V8 DSP"
37 power2_average Measured average power for 1V8 DSP (microWatts)
39 power2_label "1V8 DSP"
40 in2_input Measured voltage for 1V8 CDC (milliVolts)
41 in2_label "1V8 CDC"
42 curr3_input Measured current for 1V8 CDC (milliAmps)
43 curr3_label "1V8 CDC"
[all …]
|
| /Documentation/devicetree/bindings/mmc/ |
| D | nvidia,tegra20-sdhci.txt | 45 configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
49 - pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
52 using pads at 3V3 and 1V8 levels.
58 - nvidia,pad-autocal-pull-up-offset-1v8,
59 nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
65 - nvidia,pad-autocal-pull-up-offset-1v8-timeout,
66 nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
109 pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
114 nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
115 nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
|
| /Documentation/devicetree/bindings/media/ |
| D | s5p-mfc.txt | 14 (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
15 (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
|
| /Documentation/devicetree/bindings/regulator/ |
| D | fixed-regulator.yaml | 75 reg_1v8: regulator-1v8 {
77 regulator-name = "1v8";
|
| D | st,stm32mp1-pwr-reg.txt | 6 - reg18 for regulator 1V8
|
| D | as3722-regulator.txt | 84 regulator-name = "vdd-1v8";
|
| D | regulator-max77620.txt | 153 regulator-name = "vdd-1v8";
|
| /Documentation/devicetree/bindings/watchdog/ |
| D | sbsa-gwdt.txt | 23 Example for FVP Foundation Model v8:
|
| /Documentation/devicetree/bindings/arm/tegra/ |
| D | nvidia,tegra186-pmc.txt | 101 sdmmc1_1v8: sdmmc1-1v8 {
120 pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
|
| D | nvidia,tegra20-pmc.txt | 271 sdmmc1_1v8: sdmmc1-1v8 {
290 pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
|
| /Documentation/devicetree/bindings/clock/ |
| D | ti,cdce925.txt | 46 vdd-supply = <&1v8-reg>;
|
| D | silabs,si5341.txt | 118 * LVDS 1v8
122 silabs,format = <1>; /* LVDS 1v8 */
|
| /Documentation/devicetree/bindings/phy/ |
| D | phy-stm32-usbphyc.txt | 44 - vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
|
| /Documentation/devicetree/bindings/arm/ |
| D | cpus.yaml | 68 On ARM v8 64-bit systems this property is required
166 # On ARM v8 64-bit this property is required
210 On ARM v8 64-bit systems must be a two cell
|
| D | idle-states.txt | 239 # On ARM v8 64-bit this property is required and must
|
| /Documentation/arm64/ |
| D | sve.rst | 454 Z8 | : * V8 |
487 This follows from the way these bits are mapped to V8..V15, which are caller-
511 * V8 | |
|
| /Documentation/devicetree/bindings/mfd/ |
| D | as3722.txt | 207 regulator-name = "vdd-1v8";
|