1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2016, Avago Technologies 4 */ 5 6 #ifndef _NVME_FC_DRIVER_H 7 #define _NVME_FC_DRIVER_H 1 8 9 #include <linux/scatterlist.h> 10 11 12 /* 13 * ********************** LLDD FC-NVME Host API ******************** 14 * 15 * For FC LLDD's that are the NVME Host role. 16 * 17 * ****************************************************************** 18 */ 19 20 21 22 /** 23 * struct nvme_fc_port_info - port-specific ids and FC connection-specific 24 * data element used during NVME Host role 25 * registrations 26 * 27 * Static fields describing the port being registered: 28 * @node_name: FC WWNN for the port 29 * @port_name: FC WWPN for the port 30 * @port_role: What NVME roles are supported (see FC_PORT_ROLE_xxx) 31 * @dev_loss_tmo: maximum delay for reconnects to an association on 32 * this device. Used only on a remoteport. 33 * 34 * Initialization values for dynamic port fields: 35 * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must 36 * be set to 0. 37 */ 38 struct nvme_fc_port_info { 39 u64 node_name; 40 u64 port_name; 41 u32 port_role; 42 u32 port_id; 43 u32 dev_loss_tmo; 44 }; 45 46 47 /** 48 * struct nvmefc_ls_req - Request structure passed from NVME-FC transport 49 * to LLDD in order to perform a NVME FC-4 LS 50 * request and obtain a response. 51 * 52 * Values set by the NVME-FC layer prior to calling the LLDD ls_req 53 * entrypoint. 54 * @rqstaddr: pointer to request buffer 55 * @rqstdma: PCI DMA address of request buffer 56 * @rqstlen: Length, in bytes, of request buffer 57 * @rspaddr: pointer to response buffer 58 * @rspdma: PCI DMA address of response buffer 59 * @rsplen: Length, in bytes, of response buffer 60 * @timeout: Maximum amount of time, in seconds, to wait for the LS response. 61 * If timeout exceeded, LLDD to abort LS exchange and complete 62 * LS request with error status. 63 * @private: pointer to memory allocated alongside the ls request structure 64 * that is specifically for the LLDD to use while processing the 65 * request. The length of the buffer corresponds to the 66 * lsrqst_priv_sz value specified in the nvme_fc_port_template 67 * supplied by the LLDD. 68 * @done: The callback routine the LLDD is to invoke upon completion of 69 * the LS request. req argument is the pointer to the original LS 70 * request structure. Status argument must be 0 upon success, a 71 * negative errno on failure (example: -ENXIO). 72 */ 73 struct nvmefc_ls_req { 74 void *rqstaddr; 75 dma_addr_t rqstdma; 76 u32 rqstlen; 77 void *rspaddr; 78 dma_addr_t rspdma; 79 u32 rsplen; 80 u32 timeout; 81 82 void *private; 83 84 void (*done)(struct nvmefc_ls_req *req, int status); 85 86 } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ 87 88 89 enum nvmefc_fcp_datadir { 90 NVMEFC_FCP_NODATA, /* payload_length and sg_cnt will be zero */ 91 NVMEFC_FCP_WRITE, 92 NVMEFC_FCP_READ, 93 }; 94 95 96 /** 97 * struct nvmefc_fcp_req - Request structure passed from NVME-FC transport 98 * to LLDD in order to perform a NVME FCP IO operation. 99 * 100 * Values set by the NVME-FC layer prior to calling the LLDD fcp_io 101 * entrypoint. 102 * @cmdaddr: pointer to the FCP CMD IU buffer 103 * @rspaddr: pointer to the FCP RSP IU buffer 104 * @cmddma: PCI DMA address of the FCP CMD IU buffer 105 * @rspdma: PCI DMA address of the FCP RSP IU buffer 106 * @cmdlen: Length, in bytes, of the FCP CMD IU buffer 107 * @rsplen: Length, in bytes, of the FCP RSP IU buffer 108 * @payload_length: Length of DATA_IN or DATA_OUT payload data to transfer 109 * @sg_table: scatter/gather structure for payload data 110 * @first_sgl: memory for 1st scatter/gather list segment for payload data 111 * @sg_cnt: number of elements in the scatter/gather list 112 * @io_dir: direction of the FCP request (see NVMEFC_FCP_xxx) 113 * @sqid: The nvme SQID the command is being issued on 114 * @done: The callback routine the LLDD is to invoke upon completion of 115 * the FCP operation. req argument is the pointer to the original 116 * FCP IO operation. 117 * @private: pointer to memory allocated alongside the FCP operation 118 * request structure that is specifically for the LLDD to use 119 * while processing the operation. The length of the buffer 120 * corresponds to the fcprqst_priv_sz value specified in the 121 * nvme_fc_port_template supplied by the LLDD. 122 * 123 * Values set by the LLDD indicating completion status of the FCP operation. 124 * Must be set prior to calling the done() callback. 125 * @transferred_length: amount of payload data, in bytes, that were 126 * transferred. Should equal payload_length on success. 127 * @rcv_rsplen: length, in bytes, of the FCP RSP IU received. 128 * @status: Completion status of the FCP operation. must be 0 upon success, 129 * negative errno value upon failure (ex: -EIO). Note: this is 130 * NOT a reflection of the NVME CQE completion status. Only the 131 * status of the FCP operation at the NVME-FC level. 132 */ 133 struct nvmefc_fcp_req { 134 void *cmdaddr; 135 void *rspaddr; 136 dma_addr_t cmddma; 137 dma_addr_t rspdma; 138 u16 cmdlen; 139 u16 rsplen; 140 141 u32 payload_length; 142 struct sg_table sg_table; 143 struct scatterlist *first_sgl; 144 int sg_cnt; 145 enum nvmefc_fcp_datadir io_dir; 146 147 __le16 sqid; 148 149 void (*done)(struct nvmefc_fcp_req *req); 150 151 void *private; 152 153 u32 transferred_length; 154 u16 rcv_rsplen; 155 u32 status; 156 } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ 157 158 159 /* 160 * Direct copy of fc_port_state enum. For later merging 161 */ 162 enum nvme_fc_obj_state { 163 FC_OBJSTATE_UNKNOWN, 164 FC_OBJSTATE_NOTPRESENT, 165 FC_OBJSTATE_ONLINE, 166 FC_OBJSTATE_OFFLINE, /* User has taken Port Offline */ 167 FC_OBJSTATE_BLOCKED, 168 FC_OBJSTATE_BYPASSED, 169 FC_OBJSTATE_DIAGNOSTICS, 170 FC_OBJSTATE_LINKDOWN, 171 FC_OBJSTATE_ERROR, 172 FC_OBJSTATE_LOOPBACK, 173 FC_OBJSTATE_DELETED, 174 }; 175 176 177 /** 178 * struct nvme_fc_local_port - structure used between NVME-FC transport and 179 * a LLDD to reference a local NVME host port. 180 * Allocated/created by the nvme_fc_register_localport() 181 * transport interface. 182 * 183 * Fields with static values for the port. Initialized by the 184 * port_info struct supplied to the registration call. 185 * @port_num: NVME-FC transport host port number 186 * @port_role: NVME roles are supported on the port (see FC_PORT_ROLE_xxx) 187 * @node_name: FC WWNN for the port 188 * @port_name: FC WWPN for the port 189 * @private: pointer to memory allocated alongside the local port 190 * structure that is specifically for the LLDD to use. 191 * The length of the buffer corresponds to the local_priv_sz 192 * value specified in the nvme_fc_port_template supplied by 193 * the LLDD. 194 * @dev_loss_tmo: maximum delay for reconnects to an association on 195 * this device. To modify, lldd must call 196 * nvme_fc_set_remoteport_devloss(). 197 * 198 * Fields with dynamic values. Values may change base on link state. LLDD 199 * may reference fields directly to change them. Initialized by the 200 * port_info struct supplied to the registration call. 201 * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must 202 * be set to 0. 203 * @port_state: Operational state of the port. 204 */ 205 struct nvme_fc_local_port { 206 /* static/read-only fields */ 207 u32 port_num; 208 u32 port_role; 209 u64 node_name; 210 u64 port_name; 211 212 void *private; 213 214 /* dynamic fields */ 215 u32 port_id; 216 enum nvme_fc_obj_state port_state; 217 } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ 218 219 220 /** 221 * struct nvme_fc_remote_port - structure used between NVME-FC transport and 222 * a LLDD to reference a remote NVME subsystem port. 223 * Allocated/created by the nvme_fc_register_remoteport() 224 * transport interface. 225 * 226 * Fields with static values for the port. Initialized by the 227 * port_info struct supplied to the registration call. 228 * @port_num: NVME-FC transport remote subsystem port number 229 * @port_role: NVME roles are supported on the port (see FC_PORT_ROLE_xxx) 230 * @node_name: FC WWNN for the port 231 * @port_name: FC WWPN for the port 232 * @localport: pointer to the NVME-FC local host port the subsystem is 233 * connected to. 234 * @private: pointer to memory allocated alongside the remote port 235 * structure that is specifically for the LLDD to use. 236 * The length of the buffer corresponds to the remote_priv_sz 237 * value specified in the nvme_fc_port_template supplied by 238 * the LLDD. 239 * 240 * Fields with dynamic values. Values may change base on link or login 241 * state. LLDD may reference fields directly to change them. Initialized by 242 * the port_info struct supplied to the registration call. 243 * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must 244 * be set to 0. 245 * @port_state: Operational state of the remote port. Valid values are 246 * ONLINE or UNKNOWN. 247 */ 248 struct nvme_fc_remote_port { 249 /* static fields */ 250 u32 port_num; 251 u32 port_role; 252 u64 node_name; 253 u64 port_name; 254 struct nvme_fc_local_port *localport; 255 void *private; 256 u32 dev_loss_tmo; 257 258 /* dynamic fields */ 259 u32 port_id; 260 enum nvme_fc_obj_state port_state; 261 } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ 262 263 264 /** 265 * struct nvme_fc_port_template - structure containing static entrypoints and 266 * operational parameters for an LLDD that supports NVME host 267 * behavior. Passed by reference in port registrations. 268 * NVME-FC transport remembers template reference and may 269 * access it during runtime operation. 270 * 271 * Host/Initiator Transport Entrypoints/Parameters: 272 * 273 * @module: The LLDD module using the interface 274 * 275 * @localport_delete: The LLDD initiates deletion of a localport via 276 * nvme_fc_deregister_localport(). However, the teardown is 277 * asynchronous. This routine is called upon the completion of the 278 * teardown to inform the LLDD that the localport has been deleted. 279 * Entrypoint is Mandatory. 280 * 281 * @remoteport_delete: The LLDD initiates deletion of a remoteport via 282 * nvme_fc_deregister_remoteport(). However, the teardown is 283 * asynchronous. This routine is called upon the completion of the 284 * teardown to inform the LLDD that the remoteport has been deleted. 285 * Entrypoint is Mandatory. 286 * 287 * @create_queue: Upon creating a host<->controller association, queues are 288 * created such that they can be affinitized to cpus/cores. This 289 * callback into the LLDD to notify that a controller queue is being 290 * created. The LLDD may choose to allocate an associated hw queue 291 * or map it onto a shared hw queue. Upon return from the call, the 292 * LLDD specifies a handle that will be given back to it for any 293 * command that is posted to the controller queue. The handle can 294 * be used by the LLDD to map quickly to the proper hw queue for 295 * command execution. The mask of cpu's that will map to this queue 296 * at the block-level is also passed in. The LLDD should use the 297 * queue id and/or cpu masks to ensure proper affinitization of the 298 * controller queue to the hw queue. 299 * Entrypoint is Optional. 300 * 301 * @delete_queue: This is the inverse of the crete_queue. During 302 * host<->controller association teardown, this routine is called 303 * when a controller queue is being terminated. Any association with 304 * a hw queue should be termined. If there is a unique hw queue, the 305 * hw queue should be torn down. 306 * Entrypoint is Optional. 307 * 308 * @poll_queue: Called to poll for the completion of an io on a blk queue. 309 * Entrypoint is Optional. 310 * 311 * @ls_req: Called to issue a FC-NVME FC-4 LS service request. 312 * The nvme_fc_ls_req structure will fully describe the buffers for 313 * the request payload and where to place the response payload. The 314 * LLDD is to allocate an exchange, issue the LS request, obtain the 315 * LS response, and call the "done" routine specified in the request 316 * structure (argument to done is the ls request structure itself). 317 * Entrypoint is Mandatory. 318 * 319 * @fcp_io: called to issue a FC-NVME I/O request. The I/O may be for 320 * an admin queue or an i/o queue. The nvmefc_fcp_req structure will 321 * fully describe the io: the buffer containing the FC-NVME CMD IU 322 * (which contains the SQE), the sg list for the payload if applicable, 323 * and the buffer to place the FC-NVME RSP IU into. The LLDD will 324 * complete the i/o, indicating the amount of data transferred or 325 * any transport error, and call the "done" routine specified in the 326 * request structure (argument to done is the fcp request structure 327 * itself). 328 * Entrypoint is Mandatory. 329 * 330 * @ls_abort: called to request the LLDD to abort the indicated ls request. 331 * The call may return before the abort has completed. After aborting 332 * the request, the LLDD must still call the ls request done routine 333 * indicating an FC transport Aborted status. 334 * Entrypoint is Mandatory. 335 * 336 * @fcp_abort: called to request the LLDD to abort the indicated fcp request. 337 * The call may return before the abort has completed. After aborting 338 * the request, the LLDD must still call the fcp request done routine 339 * indicating an FC transport Aborted status. 340 * Entrypoint is Mandatory. 341 * 342 * @max_hw_queues: indicates the maximum number of hw queues the LLDD 343 * supports for cpu affinitization. 344 * Value is Mandatory. Must be at least 1. 345 * 346 * @max_sgl_segments: indicates the maximum number of sgl segments supported 347 * by the LLDD 348 * Value is Mandatory. Must be at least 1. Recommend at least 256. 349 * 350 * @max_dif_sgl_segments: indicates the maximum number of sgl segments 351 * supported by the LLDD for DIF operations. 352 * Value is Mandatory. Must be at least 1. Recommend at least 256. 353 * 354 * @dma_boundary: indicates the dma address boundary where dma mappings 355 * will be split across. 356 * Value is Mandatory. Typical value is 0xFFFFFFFF to split across 357 * 4Gig address boundarys 358 * 359 * @local_priv_sz: The LLDD sets this field to the amount of additional 360 * memory that it would like fc nvme layer to allocate on the LLDD's 361 * behalf whenever a localport is allocated. The additional memory 362 * area solely for the of the LLDD and its location is specified by 363 * the localport->private pointer. 364 * Value is Mandatory. Allowed to be zero. 365 * 366 * @remote_priv_sz: The LLDD sets this field to the amount of additional 367 * memory that it would like fc nvme layer to allocate on the LLDD's 368 * behalf whenever a remoteport is allocated. The additional memory 369 * area solely for the of the LLDD and its location is specified by 370 * the remoteport->private pointer. 371 * Value is Mandatory. Allowed to be zero. 372 * 373 * @lsrqst_priv_sz: The LLDD sets this field to the amount of additional 374 * memory that it would like fc nvme layer to allocate on the LLDD's 375 * behalf whenever a ls request structure is allocated. The additional 376 * memory area solely for the of the LLDD and its location is 377 * specified by the ls_request->private pointer. 378 * Value is Mandatory. Allowed to be zero. 379 * 380 * @fcprqst_priv_sz: The LLDD sets this field to the amount of additional 381 * memory that it would like fc nvme layer to allocate on the LLDD's 382 * behalf whenever a fcp request structure is allocated. The additional 383 * memory area solely for the of the LLDD and its location is 384 * specified by the fcp_request->private pointer. 385 * Value is Mandatory. Allowed to be zero. 386 */ 387 struct nvme_fc_port_template { 388 struct module *module; 389 390 /* initiator-based functions */ 391 void (*localport_delete)(struct nvme_fc_local_port *); 392 void (*remoteport_delete)(struct nvme_fc_remote_port *); 393 int (*create_queue)(struct nvme_fc_local_port *, 394 unsigned int qidx, u16 qsize, 395 void **handle); 396 void (*delete_queue)(struct nvme_fc_local_port *, 397 unsigned int qidx, void *handle); 398 int (*ls_req)(struct nvme_fc_local_port *, 399 struct nvme_fc_remote_port *, 400 struct nvmefc_ls_req *); 401 int (*fcp_io)(struct nvme_fc_local_port *, 402 struct nvme_fc_remote_port *, 403 void *hw_queue_handle, 404 struct nvmefc_fcp_req *); 405 void (*ls_abort)(struct nvme_fc_local_port *, 406 struct nvme_fc_remote_port *, 407 struct nvmefc_ls_req *); 408 void (*fcp_abort)(struct nvme_fc_local_port *, 409 struct nvme_fc_remote_port *, 410 void *hw_queue_handle, 411 struct nvmefc_fcp_req *); 412 413 u32 max_hw_queues; 414 u16 max_sgl_segments; 415 u16 max_dif_sgl_segments; 416 u64 dma_boundary; 417 418 /* sizes of additional private data for data structures */ 419 u32 local_priv_sz; 420 u32 remote_priv_sz; 421 u32 lsrqst_priv_sz; 422 u32 fcprqst_priv_sz; 423 }; 424 425 426 /* 427 * Initiator/Host functions 428 */ 429 430 int nvme_fc_register_localport(struct nvme_fc_port_info *pinfo, 431 struct nvme_fc_port_template *template, 432 struct device *dev, 433 struct nvme_fc_local_port **lport_p); 434 435 int nvme_fc_unregister_localport(struct nvme_fc_local_port *localport); 436 437 int nvme_fc_register_remoteport(struct nvme_fc_local_port *localport, 438 struct nvme_fc_port_info *pinfo, 439 struct nvme_fc_remote_port **rport_p); 440 441 int nvme_fc_unregister_remoteport(struct nvme_fc_remote_port *remoteport); 442 443 void nvme_fc_rescan_remoteport(struct nvme_fc_remote_port *remoteport); 444 445 int nvme_fc_set_remoteport_devloss(struct nvme_fc_remote_port *remoteport, 446 u32 dev_loss_tmo); 447 448 449 /* 450 * *************** LLDD FC-NVME Target/Subsystem API *************** 451 * 452 * For FC LLDD's that are the NVME Subsystem role 453 * 454 * ****************************************************************** 455 */ 456 457 /** 458 * struct nvmet_fc_port_info - port-specific ids and FC connection-specific 459 * data element used during NVME Subsystem role 460 * registrations 461 * 462 * Static fields describing the port being registered: 463 * @node_name: FC WWNN for the port 464 * @port_name: FC WWPN for the port 465 * 466 * Initialization values for dynamic port fields: 467 * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must 468 * be set to 0. 469 */ 470 struct nvmet_fc_port_info { 471 u64 node_name; 472 u64 port_name; 473 u32 port_id; 474 }; 475 476 477 /** 478 * struct nvmefc_tgt_ls_req - Structure used between LLDD and NVMET-FC 479 * layer to represent the exchange context for 480 * a FC-NVME Link Service (LS). 481 * 482 * The structure is allocated by the LLDD whenever a LS Request is received 483 * from the FC link. The address of the structure is passed to the nvmet-fc 484 * layer via the nvmet_fc_rcv_ls_req() call. The address of the structure 485 * will be passed back to the LLDD when the response is to be transmit. 486 * The LLDD is to use the address to map back to the LLDD exchange structure 487 * which maintains information such as the targetport the LS was received 488 * on, the remote FC NVME initiator that sent the LS, and any FC exchange 489 * context. Upon completion of the LS response transmit, the address of the 490 * structure will be passed back to the LS rsp done() routine, allowing the 491 * nvmet-fc layer to release dma resources. Upon completion of the done() 492 * routine, no further access will be made by the nvmet-fc layer and the 493 * LLDD can de-allocate the structure. 494 * 495 * Field initialization: 496 * At the time of the nvmet_fc_rcv_ls_req() call, there is no content that 497 * is valid in the structure. 498 * 499 * When the structure is used for the LLDD->xmt_ls_rsp() call, the nvmet-fc 500 * layer will fully set the fields in order to specify the response 501 * payload buffer and its length as well as the done routine to be called 502 * upon compeletion of the transmit. The nvmet-fc layer will also set a 503 * private pointer for its own use in the done routine. 504 * 505 * Values set by the NVMET-FC layer prior to calling the LLDD xmt_ls_rsp 506 * entrypoint. 507 * @rspbuf: pointer to the LS response buffer 508 * @rspdma: PCI DMA address of the LS response buffer 509 * @rsplen: Length, in bytes, of the LS response buffer 510 * @done: The callback routine the LLDD is to invoke upon completion of 511 * transmitting the LS response. req argument is the pointer to 512 * the original ls request. 513 * @nvmet_fc_private: pointer to an internal NVMET-FC layer structure used 514 * as part of the NVMET-FC processing. The LLDD is not to access 515 * this pointer. 516 */ 517 struct nvmefc_tgt_ls_req { 518 void *rspbuf; 519 dma_addr_t rspdma; 520 u16 rsplen; 521 522 void (*done)(struct nvmefc_tgt_ls_req *req); 523 void *nvmet_fc_private; /* LLDD is not to access !! */ 524 }; 525 526 /* Operations that NVME-FC layer may request the LLDD to perform for FCP */ 527 enum { 528 NVMET_FCOP_READDATA = 1, /* xmt data to initiator */ 529 NVMET_FCOP_WRITEDATA = 2, /* xmt data from initiator */ 530 NVMET_FCOP_READDATA_RSP = 3, /* xmt data to initiator and send 531 * rsp as well 532 */ 533 NVMET_FCOP_RSP = 4, /* send rsp frame */ 534 }; 535 536 /** 537 * struct nvmefc_tgt_fcp_req - Structure used between LLDD and NVMET-FC 538 * layer to represent the exchange context and 539 * the specific FC-NVME IU operation(s) to perform 540 * for a FC-NVME FCP IO. 541 * 542 * Structure used between LLDD and nvmet-fc layer to represent the exchange 543 * context for a FC-NVME FCP I/O operation (e.g. a nvme sqe, the sqe-related 544 * memory transfers, and its assocated cqe transfer). 545 * 546 * The structure is allocated by the LLDD whenever a FCP CMD IU is received 547 * from the FC link. The address of the structure is passed to the nvmet-fc 548 * layer via the nvmet_fc_rcv_fcp_req() call. The address of the structure 549 * will be passed back to the LLDD for the data operations and transmit of 550 * the response. The LLDD is to use the address to map back to the LLDD 551 * exchange structure which maintains information such as the targetport 552 * the FCP I/O was received on, the remote FC NVME initiator that sent the 553 * FCP I/O, and any FC exchange context. Upon completion of the FCP target 554 * operation, the address of the structure will be passed back to the FCP 555 * op done() routine, allowing the nvmet-fc layer to release dma resources. 556 * Upon completion of the done() routine for either RSP or ABORT ops, no 557 * further access will be made by the nvmet-fc layer and the LLDD can 558 * de-allocate the structure. 559 * 560 * Field initialization: 561 * At the time of the nvmet_fc_rcv_fcp_req() call, there is no content that 562 * is valid in the structure. 563 * 564 * When the structure is used for an FCP target operation, the nvmet-fc 565 * layer will fully set the fields in order to specify the scattergather 566 * list, the transfer length, as well as the done routine to be called 567 * upon compeletion of the operation. The nvmet-fc layer will also set a 568 * private pointer for its own use in the done routine. 569 * 570 * Values set by the NVMET-FC layer prior to calling the LLDD fcp_op 571 * entrypoint. 572 * @op: Indicates the FCP IU operation to perform (see NVMET_FCOP_xxx) 573 * @hwqid: Specifies the hw queue index (0..N-1, where N is the 574 * max_hw_queues value from the LLD's nvmet_fc_target_template) 575 * that the operation is to use. 576 * @offset: Indicates the DATA_OUT/DATA_IN payload offset to be tranferred. 577 * Field is only valid on WRITEDATA, READDATA, or READDATA_RSP ops. 578 * @timeout: amount of time, in seconds, to wait for a response from the NVME 579 * host. A value of 0 is an infinite wait. 580 * Valid only for the following ops: 581 * WRITEDATA: caps the wait for data reception 582 * READDATA_RSP & RSP: caps wait for FCP_CONF reception (if used) 583 * @transfer_length: the length, in bytes, of the DATA_OUT or DATA_IN payload 584 * that is to be transferred. 585 * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. 586 * @ba_rjt: Contains the BA_RJT payload that is to be transferred. 587 * Valid only for the NVMET_FCOP_BA_RJT op. 588 * @sg: Scatter/gather list for the DATA_OUT/DATA_IN payload data. 589 * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. 590 * @sg_cnt: Number of valid entries in the scatter/gather list. 591 * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. 592 * @rspaddr: pointer to the FCP RSP IU buffer to be transmit 593 * Used by RSP and READDATA_RSP ops 594 * @rspdma: PCI DMA address of the FCP RSP IU buffer 595 * Used by RSP and READDATA_RSP ops 596 * @rsplen: Length, in bytes, of the FCP RSP IU buffer 597 * Used by RSP and READDATA_RSP ops 598 * @done: The callback routine the LLDD is to invoke upon completion of 599 * the operation. req argument is the pointer to the original 600 * FCP subsystem op request. 601 * @nvmet_fc_private: pointer to an internal NVMET-FC layer structure used 602 * as part of the NVMET-FC processing. The LLDD is not to 603 * reference this field. 604 * 605 * Values set by the LLDD indicating completion status of the FCP operation. 606 * Must be set prior to calling the done() callback. 607 * @transferred_length: amount of DATA_OUT payload data received by a 608 * a WRITEDATA operation. If not a WRITEDATA operation, value must 609 * be set to 0. Should equal transfer_length on success. 610 * @fcp_error: status of the FCP operation. Must be 0 on success; on failure 611 * must be a NVME_SC_FC_xxxx value. 612 */ 613 struct nvmefc_tgt_fcp_req { 614 u8 op; 615 u16 hwqid; 616 u32 offset; 617 u32 timeout; 618 u32 transfer_length; 619 struct fc_ba_rjt ba_rjt; 620 struct scatterlist *sg; 621 int sg_cnt; 622 void *rspaddr; 623 dma_addr_t rspdma; 624 u16 rsplen; 625 626 void (*done)(struct nvmefc_tgt_fcp_req *); 627 628 void *nvmet_fc_private; /* LLDD is not to access !! */ 629 630 u32 transferred_length; 631 int fcp_error; 632 }; 633 634 635 /* Target Features (Bit fields) LLDD supports */ 636 enum { 637 NVMET_FCTGTFEAT_READDATA_RSP = (1 << 0), 638 /* Bit 0: supports the NVMET_FCPOP_READDATA_RSP op, which 639 * sends (the last) Read Data sequence followed by the RSP 640 * sequence in one LLDD operation. Errors during Data 641 * sequence transmit must not allow RSP sequence to be sent. 642 */ 643 }; 644 645 646 /** 647 * struct nvmet_fc_target_port - structure used between NVME-FC transport and 648 * a LLDD to reference a local NVME subsystem port. 649 * Allocated/created by the nvme_fc_register_targetport() 650 * transport interface. 651 * 652 * Fields with static values for the port. Initialized by the 653 * port_info struct supplied to the registration call. 654 * @port_num: NVME-FC transport subsytem port number 655 * @node_name: FC WWNN for the port 656 * @port_name: FC WWPN for the port 657 * @private: pointer to memory allocated alongside the local port 658 * structure that is specifically for the LLDD to use. 659 * The length of the buffer corresponds to the target_priv_sz 660 * value specified in the nvme_fc_target_template supplied by 661 * the LLDD. 662 * 663 * Fields with dynamic values. Values may change base on link state. LLDD 664 * may reference fields directly to change them. Initialized by the 665 * port_info struct supplied to the registration call. 666 * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must 667 * be set to 0. 668 * @port_state: Operational state of the port. 669 */ 670 struct nvmet_fc_target_port { 671 /* static/read-only fields */ 672 u32 port_num; 673 u64 node_name; 674 u64 port_name; 675 676 void *private; 677 678 /* dynamic fields */ 679 u32 port_id; 680 enum nvme_fc_obj_state port_state; 681 } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ 682 683 684 /** 685 * struct nvmet_fc_target_template - structure containing static entrypoints 686 * and operational parameters for an LLDD that supports NVME 687 * subsystem behavior. Passed by reference in port 688 * registrations. NVME-FC transport remembers template 689 * reference and may access it during runtime operation. 690 * 691 * Subsystem/Target Transport Entrypoints/Parameters: 692 * 693 * @targetport_delete: The LLDD initiates deletion of a targetport via 694 * nvmet_fc_unregister_targetport(). However, the teardown is 695 * asynchronous. This routine is called upon the completion of the 696 * teardown to inform the LLDD that the targetport has been deleted. 697 * Entrypoint is Mandatory. 698 * 699 * @xmt_ls_rsp: Called to transmit the response to a FC-NVME FC-4 LS service. 700 * The nvmefc_tgt_ls_req structure is the same LLDD-supplied exchange 701 * structure specified in the nvmet_fc_rcv_ls_req() call made when 702 * the LS request was received. The structure will fully describe 703 * the buffers for the response payload and the dma address of the 704 * payload. The LLDD is to transmit the response (or return a non-zero 705 * errno status), and upon completion of the transmit, call the 706 * "done" routine specified in the nvmefc_tgt_ls_req structure 707 * (argument to done is the ls reqwuest structure itself). 708 * After calling the done routine, the LLDD shall consider the 709 * LS handling complete and the nvmefc_tgt_ls_req structure may 710 * be freed/released. 711 * Entrypoint is Mandatory. 712 * 713 * @fcp_op: Called to perform a data transfer or transmit a response. 714 * The nvmefc_tgt_fcp_req structure is the same LLDD-supplied 715 * exchange structure specified in the nvmet_fc_rcv_fcp_req() call 716 * made when the FCP CMD IU was received. The op field in the 717 * structure shall indicate the operation for the LLDD to perform 718 * relative to the io. 719 * NVMET_FCOP_READDATA operation: the LLDD is to send the 720 * payload data (described by sglist) to the host in 1 or 721 * more FC sequences (preferrably 1). Note: the fc-nvme layer 722 * may call the READDATA operation multiple times for longer 723 * payloads. 724 * NVMET_FCOP_WRITEDATA operation: the LLDD is to receive the 725 * payload data (described by sglist) from the host via 1 or 726 * more FC sequences (preferrably 1). The LLDD is to generate 727 * the XFER_RDY IU(s) corresponding to the data being requested. 728 * Note: the FC-NVME layer may call the WRITEDATA operation 729 * multiple times for longer payloads. 730 * NVMET_FCOP_READDATA_RSP operation: the LLDD is to send the 731 * payload data (described by sglist) to the host in 1 or 732 * more FC sequences (preferrably 1). If an error occurs during 733 * payload data transmission, the LLDD is to set the 734 * nvmefc_tgt_fcp_req fcp_error and transferred_length field, then 735 * consider the operation complete. On error, the LLDD is to not 736 * transmit the FCP_RSP iu. If all payload data is transferred 737 * successfully, the LLDD is to update the nvmefc_tgt_fcp_req 738 * transferred_length field and may subsequently transmit the 739 * FCP_RSP iu payload (described by rspbuf, rspdma, rsplen). 740 * If FCP_CONF is supported, the LLDD is to await FCP_CONF 741 * reception to confirm the RSP reception by the host. The LLDD 742 * may retramsit the FCP_RSP iu if necessary per FC-NVME. Upon 743 * transmission of the FCP_RSP iu if FCP_CONF is not supported, 744 * or upon success/failure of FCP_CONF if it is supported, the 745 * LLDD is to set the nvmefc_tgt_fcp_req fcp_error field and 746 * consider the operation complete. 747 * NVMET_FCOP_RSP: the LLDD is to transmit the FCP_RSP iu payload 748 * (described by rspbuf, rspdma, rsplen). If FCP_CONF is 749 * supported, the LLDD is to await FCP_CONF reception to confirm 750 * the RSP reception by the host. The LLDD may retramsit the 751 * FCP_RSP iu if FCP_CONF is not received per FC-NVME. Upon 752 * transmission of the FCP_RSP iu if FCP_CONF is not supported, 753 * or upon success/failure of FCP_CONF if it is supported, the 754 * LLDD is to set the nvmefc_tgt_fcp_req fcp_error field and 755 * consider the operation complete. 756 * Upon completing the indicated operation, the LLDD is to set the 757 * status fields for the operation (tranferred_length and fcp_error 758 * status) in the request, then call the "done" routine 759 * indicated in the fcp request. After the operation completes, 760 * regardless of whether the FCP_RSP iu was successfully transmit, 761 * the LLDD-supplied exchange structure must remain valid until the 762 * transport calls the fcp_req_release() callback to return ownership 763 * of the exchange structure back to the LLDD so that it may be used 764 * for another fcp command. 765 * Note: when calling the done routine for READDATA or WRITEDATA 766 * operations, the fc-nvme layer may immediate convert, in the same 767 * thread and before returning to the LLDD, the fcp operation to 768 * the next operation for the fcp io and call the LLDDs fcp_op 769 * call again. If fields in the fcp request are to be accessed post 770 * the done call, the LLDD should save their values prior to calling 771 * the done routine, and inspect the save values after the done 772 * routine. 773 * Returns 0 on success, -<errno> on failure (Ex: -EIO) 774 * Entrypoint is Mandatory. 775 * 776 * @fcp_abort: Called by the transport to abort an active command. 777 * The command may be in-between operations (nothing active in LLDD) 778 * or may have an active WRITEDATA operation pending. The LLDD is to 779 * initiate the ABTS process for the command and return from the 780 * callback. The ABTS does not need to be complete on the command. 781 * The fcp_abort callback inherently cannot fail. After the 782 * fcp_abort() callback completes, the transport will wait for any 783 * outstanding operation (if there was one) to complete, then will 784 * call the fcp_req_release() callback to return the command's 785 * exchange context back to the LLDD. 786 * Entrypoint is Mandatory. 787 * 788 * @fcp_req_release: Called by the transport to return a nvmefc_tgt_fcp_req 789 * to the LLDD after all operations on the fcp operation are complete. 790 * This may be due to the command completing or upon completion of 791 * abort cleanup. 792 * Entrypoint is Mandatory. 793 * 794 * @defer_rcv: Called by the transport to signal the LLLD that it has 795 * begun processing of a previously received NVME CMD IU. The LLDD 796 * is now free to re-use the rcv buffer associated with the 797 * nvmefc_tgt_fcp_req. 798 * Entrypoint is Optional. 799 * 800 * @discovery_event: Called by the transport to generate an RSCN 801 * change notifications to NVME initiators. The RSCN notifications 802 * should cause the initiator to rescan the discovery controller 803 * on the targetport. 804 * 805 * @max_hw_queues: indicates the maximum number of hw queues the LLDD 806 * supports for cpu affinitization. 807 * Value is Mandatory. Must be at least 1. 808 * 809 * @max_sgl_segments: indicates the maximum number of sgl segments supported 810 * by the LLDD 811 * Value is Mandatory. Must be at least 1. Recommend at least 256. 812 * 813 * @max_dif_sgl_segments: indicates the maximum number of sgl segments 814 * supported by the LLDD for DIF operations. 815 * Value is Mandatory. Must be at least 1. Recommend at least 256. 816 * 817 * @dma_boundary: indicates the dma address boundary where dma mappings 818 * will be split across. 819 * Value is Mandatory. Typical value is 0xFFFFFFFF to split across 820 * 4Gig address boundarys 821 * 822 * @target_features: The LLDD sets bits in this field to correspond to 823 * optional features that are supported by the LLDD. 824 * Refer to the NVMET_FCTGTFEAT_xxx values. 825 * Value is Mandatory. Allowed to be zero. 826 * 827 * @target_priv_sz: The LLDD sets this field to the amount of additional 828 * memory that it would like fc nvme layer to allocate on the LLDD's 829 * behalf whenever a targetport is allocated. The additional memory 830 * area solely for the of the LLDD and its location is specified by 831 * the targetport->private pointer. 832 * Value is Mandatory. Allowed to be zero. 833 */ 834 struct nvmet_fc_target_template { 835 void (*targetport_delete)(struct nvmet_fc_target_port *tgtport); 836 int (*xmt_ls_rsp)(struct nvmet_fc_target_port *tgtport, 837 struct nvmefc_tgt_ls_req *tls_req); 838 int (*fcp_op)(struct nvmet_fc_target_port *tgtport, 839 struct nvmefc_tgt_fcp_req *fcpreq); 840 void (*fcp_abort)(struct nvmet_fc_target_port *tgtport, 841 struct nvmefc_tgt_fcp_req *fcpreq); 842 void (*fcp_req_release)(struct nvmet_fc_target_port *tgtport, 843 struct nvmefc_tgt_fcp_req *fcpreq); 844 void (*defer_rcv)(struct nvmet_fc_target_port *tgtport, 845 struct nvmefc_tgt_fcp_req *fcpreq); 846 void (*discovery_event)(struct nvmet_fc_target_port *tgtport); 847 848 u32 max_hw_queues; 849 u16 max_sgl_segments; 850 u16 max_dif_sgl_segments; 851 u64 dma_boundary; 852 853 u32 target_features; 854 855 u32 target_priv_sz; 856 }; 857 858 859 int nvmet_fc_register_targetport(struct nvmet_fc_port_info *portinfo, 860 struct nvmet_fc_target_template *template, 861 struct device *dev, 862 struct nvmet_fc_target_port **tgtport_p); 863 864 int nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *tgtport); 865 866 int nvmet_fc_rcv_ls_req(struct nvmet_fc_target_port *tgtport, 867 struct nvmefc_tgt_ls_req *lsreq, 868 void *lsreqbuf, u32 lsreqbuf_len); 869 870 int nvmet_fc_rcv_fcp_req(struct nvmet_fc_target_port *tgtport, 871 struct nvmefc_tgt_fcp_req *fcpreq, 872 void *cmdiubuf, u32 cmdiubuf_len); 873 874 void nvmet_fc_rcv_fcp_abort(struct nvmet_fc_target_port *tgtport, 875 struct nvmefc_tgt_fcp_req *fcpreq); 876 877 #endif /* _NVME_FC_DRIVER_H */ 878