1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
4 * Hannu Savolainen 1993-1996,
5 * Rob Hooft
6 *
7 * Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)
8 *
9 * Most if code is ported from OSS/Lite.
10 */
11
12 #include <sound/opl3.h>
13 #include <linux/io.h>
14 #include <linux/delay.h>
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/ioport.h>
19 #include <sound/minors.h>
20 #include "opl3_voice.h"
21
22 MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Hannu Savolainen 1993-1996, Rob Hooft");
23 MODULE_DESCRIPTION("Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)");
24 MODULE_LICENSE("GPL");
25
snd_opl2_command(struct snd_opl3 * opl3,unsigned short cmd,unsigned char val)26 static void snd_opl2_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
27 {
28 unsigned long flags;
29 unsigned long port;
30
31 /*
32 * The original 2-OP synth requires a quite long delay
33 * after writing to a register.
34 */
35
36 port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
37
38 spin_lock_irqsave(&opl3->reg_lock, flags);
39
40 outb((unsigned char) cmd, port);
41 udelay(10);
42
43 outb((unsigned char) val, port + 1);
44 udelay(30);
45
46 spin_unlock_irqrestore(&opl3->reg_lock, flags);
47 }
48
snd_opl3_command(struct snd_opl3 * opl3,unsigned short cmd,unsigned char val)49 static void snd_opl3_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
50 {
51 unsigned long flags;
52 unsigned long port;
53
54 /*
55 * The OPL-3 survives with just two INBs
56 * after writing to a register.
57 */
58
59 port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
60
61 spin_lock_irqsave(&opl3->reg_lock, flags);
62
63 outb((unsigned char) cmd, port);
64 inb(opl3->l_port);
65 inb(opl3->l_port);
66
67 outb((unsigned char) val, port + 1);
68 inb(opl3->l_port);
69 inb(opl3->l_port);
70
71 spin_unlock_irqrestore(&opl3->reg_lock, flags);
72 }
73
snd_opl3_detect(struct snd_opl3 * opl3)74 static int snd_opl3_detect(struct snd_opl3 * opl3)
75 {
76 /*
77 * This function returns 1 if the FM chip is present at the given I/O port
78 * The detection algorithm plays with the timer built in the FM chip and
79 * looks for a change in the status register.
80 *
81 * Note! The timers of the FM chip are not connected to AdLib (and compatible)
82 * boards.
83 *
84 * Note2! The chip is initialized if detected.
85 */
86
87 unsigned char stat1, stat2, signature;
88
89 /* Reset timers 1 and 2 */
90 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
91 /* Reset the IRQ of the FM chip */
92 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
93 signature = stat1 = inb(opl3->l_port); /* Status register */
94 if ((stat1 & 0xe0) != 0x00) { /* Should be 0x00 */
95 snd_printd("OPL3: stat1 = 0x%x\n", stat1);
96 return -ENODEV;
97 }
98 /* Set timer1 to 0xff */
99 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 0xff);
100 /* Unmask and start timer 1 */
101 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER2_MASK | OPL3_TIMER1_START);
102 /* Now we have to delay at least 80us */
103 udelay(200);
104 /* Read status after timers have expired */
105 stat2 = inb(opl3->l_port);
106 /* Stop the timers */
107 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
108 /* Reset the IRQ of the FM chip */
109 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
110 if ((stat2 & 0xe0) != 0xc0) { /* There is no YM3812 */
111 snd_printd("OPL3: stat2 = 0x%x\n", stat2);
112 return -ENODEV;
113 }
114
115 /* If the toplevel code knows exactly the type of chip, don't try
116 to detect it. */
117 if (opl3->hardware != OPL3_HW_AUTO)
118 return 0;
119
120 /* There is a FM chip on this address. Detect the type (OPL2 to OPL4) */
121 if (signature == 0x06) { /* OPL2 */
122 opl3->hardware = OPL3_HW_OPL2;
123 } else {
124 /*
125 * If we had an OPL4 chip, opl3->hardware would have been set
126 * by the OPL4 driver; so we can assume OPL3 here.
127 */
128 if (snd_BUG_ON(!opl3->r_port))
129 return -ENODEV;
130 opl3->hardware = OPL3_HW_OPL3;
131 }
132 return 0;
133 }
134
135 /*
136 * AdLib timers
137 */
138
139 /*
140 * Timer 1 - 80us
141 */
142
snd_opl3_timer1_start(struct snd_timer * timer)143 static int snd_opl3_timer1_start(struct snd_timer * timer)
144 {
145 unsigned long flags;
146 unsigned char tmp;
147 unsigned int ticks;
148 struct snd_opl3 *opl3;
149
150 opl3 = snd_timer_chip(timer);
151 spin_lock_irqsave(&opl3->timer_lock, flags);
152 ticks = timer->sticks;
153 tmp = (opl3->timer_enable | OPL3_TIMER1_START) & ~OPL3_TIMER1_MASK;
154 opl3->timer_enable = tmp;
155 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 256 - ticks); /* timer 1 count */
156 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp); /* enable timer 1 IRQ */
157 spin_unlock_irqrestore(&opl3->timer_lock, flags);
158 return 0;
159 }
160
snd_opl3_timer1_stop(struct snd_timer * timer)161 static int snd_opl3_timer1_stop(struct snd_timer * timer)
162 {
163 unsigned long flags;
164 unsigned char tmp;
165 struct snd_opl3 *opl3;
166
167 opl3 = snd_timer_chip(timer);
168 spin_lock_irqsave(&opl3->timer_lock, flags);
169 tmp = (opl3->timer_enable | OPL3_TIMER1_MASK) & ~OPL3_TIMER1_START;
170 opl3->timer_enable = tmp;
171 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp); /* disable timer #1 */
172 spin_unlock_irqrestore(&opl3->timer_lock, flags);
173 return 0;
174 }
175
176 /*
177 * Timer 2 - 320us
178 */
179
snd_opl3_timer2_start(struct snd_timer * timer)180 static int snd_opl3_timer2_start(struct snd_timer * timer)
181 {
182 unsigned long flags;
183 unsigned char tmp;
184 unsigned int ticks;
185 struct snd_opl3 *opl3;
186
187 opl3 = snd_timer_chip(timer);
188 spin_lock_irqsave(&opl3->timer_lock, flags);
189 ticks = timer->sticks;
190 tmp = (opl3->timer_enable | OPL3_TIMER2_START) & ~OPL3_TIMER2_MASK;
191 opl3->timer_enable = tmp;
192 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER2, 256 - ticks); /* timer 1 count */
193 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp); /* enable timer 1 IRQ */
194 spin_unlock_irqrestore(&opl3->timer_lock, flags);
195 return 0;
196 }
197
snd_opl3_timer2_stop(struct snd_timer * timer)198 static int snd_opl3_timer2_stop(struct snd_timer * timer)
199 {
200 unsigned long flags;
201 unsigned char tmp;
202 struct snd_opl3 *opl3;
203
204 opl3 = snd_timer_chip(timer);
205 spin_lock_irqsave(&opl3->timer_lock, flags);
206 tmp = (opl3->timer_enable | OPL3_TIMER2_MASK) & ~OPL3_TIMER2_START;
207 opl3->timer_enable = tmp;
208 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp); /* disable timer #1 */
209 spin_unlock_irqrestore(&opl3->timer_lock, flags);
210 return 0;
211 }
212
213 /*
214
215 */
216
217 static struct snd_timer_hardware snd_opl3_timer1 =
218 {
219 .flags = SNDRV_TIMER_HW_STOP,
220 .resolution = 80000,
221 .ticks = 256,
222 .start = snd_opl3_timer1_start,
223 .stop = snd_opl3_timer1_stop,
224 };
225
226 static struct snd_timer_hardware snd_opl3_timer2 =
227 {
228 .flags = SNDRV_TIMER_HW_STOP,
229 .resolution = 320000,
230 .ticks = 256,
231 .start = snd_opl3_timer2_start,
232 .stop = snd_opl3_timer2_stop,
233 };
234
snd_opl3_timer1_init(struct snd_opl3 * opl3,int timer_no)235 static int snd_opl3_timer1_init(struct snd_opl3 * opl3, int timer_no)
236 {
237 struct snd_timer *timer = NULL;
238 struct snd_timer_id tid;
239 int err;
240
241 tid.dev_class = SNDRV_TIMER_CLASS_CARD;
242 tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
243 tid.card = opl3->card->number;
244 tid.device = timer_no;
245 tid.subdevice = 0;
246 if ((err = snd_timer_new(opl3->card, "AdLib timer #1", &tid, &timer)) >= 0) {
247 strcpy(timer->name, "AdLib timer #1");
248 timer->private_data = opl3;
249 timer->hw = snd_opl3_timer1;
250 }
251 opl3->timer1 = timer;
252 return err;
253 }
254
snd_opl3_timer2_init(struct snd_opl3 * opl3,int timer_no)255 static int snd_opl3_timer2_init(struct snd_opl3 * opl3, int timer_no)
256 {
257 struct snd_timer *timer = NULL;
258 struct snd_timer_id tid;
259 int err;
260
261 tid.dev_class = SNDRV_TIMER_CLASS_CARD;
262 tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
263 tid.card = opl3->card->number;
264 tid.device = timer_no;
265 tid.subdevice = 0;
266 if ((err = snd_timer_new(opl3->card, "AdLib timer #2", &tid, &timer)) >= 0) {
267 strcpy(timer->name, "AdLib timer #2");
268 timer->private_data = opl3;
269 timer->hw = snd_opl3_timer2;
270 }
271 opl3->timer2 = timer;
272 return err;
273 }
274
275 /*
276
277 */
278
snd_opl3_interrupt(struct snd_hwdep * hw)279 void snd_opl3_interrupt(struct snd_hwdep * hw)
280 {
281 unsigned char status;
282 struct snd_opl3 *opl3;
283 struct snd_timer *timer;
284
285 if (hw == NULL)
286 return;
287
288 opl3 = hw->private_data;
289 status = inb(opl3->l_port);
290 #if 0
291 snd_printk(KERN_DEBUG "AdLib IRQ status = 0x%x\n", status);
292 #endif
293 if (!(status & 0x80))
294 return;
295
296 if (status & 0x40) {
297 timer = opl3->timer1;
298 snd_timer_interrupt(timer, timer->sticks);
299 }
300 if (status & 0x20) {
301 timer = opl3->timer2;
302 snd_timer_interrupt(timer, timer->sticks);
303 }
304 }
305
306 EXPORT_SYMBOL(snd_opl3_interrupt);
307
308 /*
309
310 */
311
snd_opl3_free(struct snd_opl3 * opl3)312 static int snd_opl3_free(struct snd_opl3 *opl3)
313 {
314 if (snd_BUG_ON(!opl3))
315 return -ENXIO;
316 if (opl3->private_free)
317 opl3->private_free(opl3);
318 snd_opl3_clear_patches(opl3);
319 release_and_free_resource(opl3->res_l_port);
320 release_and_free_resource(opl3->res_r_port);
321 kfree(opl3);
322 return 0;
323 }
324
snd_opl3_dev_free(struct snd_device * device)325 static int snd_opl3_dev_free(struct snd_device *device)
326 {
327 struct snd_opl3 *opl3 = device->device_data;
328 return snd_opl3_free(opl3);
329 }
330
snd_opl3_new(struct snd_card * card,unsigned short hardware,struct snd_opl3 ** ropl3)331 int snd_opl3_new(struct snd_card *card,
332 unsigned short hardware,
333 struct snd_opl3 **ropl3)
334 {
335 static struct snd_device_ops ops = {
336 .dev_free = snd_opl3_dev_free,
337 };
338 struct snd_opl3 *opl3;
339 int err;
340
341 *ropl3 = NULL;
342 opl3 = kzalloc(sizeof(*opl3), GFP_KERNEL);
343 if (!opl3)
344 return -ENOMEM;
345
346 opl3->card = card;
347 opl3->hardware = hardware;
348 spin_lock_init(&opl3->reg_lock);
349 spin_lock_init(&opl3->timer_lock);
350
351 if ((err = snd_device_new(card, SNDRV_DEV_CODEC, opl3, &ops)) < 0) {
352 snd_opl3_free(opl3);
353 return err;
354 }
355
356 *ropl3 = opl3;
357 return 0;
358 }
359
360 EXPORT_SYMBOL(snd_opl3_new);
361
snd_opl3_init(struct snd_opl3 * opl3)362 int snd_opl3_init(struct snd_opl3 *opl3)
363 {
364 if (! opl3->command) {
365 printk(KERN_ERR "snd_opl3_init: command not defined!\n");
366 return -EINVAL;
367 }
368
369 opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
370 /* Melodic mode */
371 opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);
372
373 switch (opl3->hardware & OPL3_HW_MASK) {
374 case OPL3_HW_OPL2:
375 opl3->max_voices = MAX_OPL2_VOICES;
376 break;
377 case OPL3_HW_OPL3:
378 case OPL3_HW_OPL4:
379 opl3->max_voices = MAX_OPL3_VOICES;
380 /* Enter OPL3 mode */
381 opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE);
382 }
383 return 0;
384 }
385
386 EXPORT_SYMBOL(snd_opl3_init);
387
snd_opl3_create(struct snd_card * card,unsigned long l_port,unsigned long r_port,unsigned short hardware,int integrated,struct snd_opl3 ** ropl3)388 int snd_opl3_create(struct snd_card *card,
389 unsigned long l_port,
390 unsigned long r_port,
391 unsigned short hardware,
392 int integrated,
393 struct snd_opl3 ** ropl3)
394 {
395 struct snd_opl3 *opl3;
396 int err;
397
398 *ropl3 = NULL;
399 if ((err = snd_opl3_new(card, hardware, &opl3)) < 0)
400 return err;
401 if (! integrated) {
402 if ((opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)")) == NULL) {
403 snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
404 snd_device_free(card, opl3);
405 return -EBUSY;
406 }
407 if (r_port != 0 &&
408 (opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)")) == NULL) {
409 snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
410 snd_device_free(card, opl3);
411 return -EBUSY;
412 }
413 }
414 opl3->l_port = l_port;
415 opl3->r_port = r_port;
416
417 switch (opl3->hardware) {
418 /* some hardware doesn't support timers */
419 case OPL3_HW_OPL3_SV:
420 case OPL3_HW_OPL3_CS:
421 case OPL3_HW_OPL3_FM801:
422 opl3->command = &snd_opl3_command;
423 break;
424 default:
425 opl3->command = &snd_opl2_command;
426 if ((err = snd_opl3_detect(opl3)) < 0) {
427 snd_printd("OPL2/3 chip not detected at 0x%lx/0x%lx\n",
428 opl3->l_port, opl3->r_port);
429 snd_device_free(card, opl3);
430 return err;
431 }
432 /* detect routine returns correct hardware type */
433 switch (opl3->hardware & OPL3_HW_MASK) {
434 case OPL3_HW_OPL3:
435 case OPL3_HW_OPL4:
436 opl3->command = &snd_opl3_command;
437 }
438 }
439
440 snd_opl3_init(opl3);
441
442 *ropl3 = opl3;
443 return 0;
444 }
445
446 EXPORT_SYMBOL(snd_opl3_create);
447
snd_opl3_timer_new(struct snd_opl3 * opl3,int timer1_dev,int timer2_dev)448 int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev)
449 {
450 int err;
451
452 if (timer1_dev >= 0)
453 if ((err = snd_opl3_timer1_init(opl3, timer1_dev)) < 0)
454 return err;
455 if (timer2_dev >= 0) {
456 if ((err = snd_opl3_timer2_init(opl3, timer2_dev)) < 0) {
457 snd_device_free(opl3->card, opl3->timer1);
458 opl3->timer1 = NULL;
459 return err;
460 }
461 }
462 return 0;
463 }
464
465 EXPORT_SYMBOL(snd_opl3_timer_new);
466
snd_opl3_hwdep_new(struct snd_opl3 * opl3,int device,int seq_device,struct snd_hwdep ** rhwdep)467 int snd_opl3_hwdep_new(struct snd_opl3 * opl3,
468 int device, int seq_device,
469 struct snd_hwdep ** rhwdep)
470 {
471 struct snd_hwdep *hw;
472 struct snd_card *card = opl3->card;
473 int err;
474
475 if (rhwdep)
476 *rhwdep = NULL;
477
478 /* create hardware dependent device (direct FM) */
479
480 if ((err = snd_hwdep_new(card, "OPL2/OPL3", device, &hw)) < 0) {
481 snd_device_free(card, opl3);
482 return err;
483 }
484 hw->private_data = opl3;
485 hw->exclusive = 1;
486 #ifdef CONFIG_SND_OSSEMUL
487 if (device == 0)
488 hw->oss_type = SNDRV_OSS_DEVICE_TYPE_DMFM;
489 #endif
490 strcpy(hw->name, hw->id);
491 switch (opl3->hardware & OPL3_HW_MASK) {
492 case OPL3_HW_OPL2:
493 strcpy(hw->name, "OPL2 FM");
494 hw->iface = SNDRV_HWDEP_IFACE_OPL2;
495 break;
496 case OPL3_HW_OPL3:
497 strcpy(hw->name, "OPL3 FM");
498 hw->iface = SNDRV_HWDEP_IFACE_OPL3;
499 break;
500 case OPL3_HW_OPL4:
501 strcpy(hw->name, "OPL4 FM");
502 hw->iface = SNDRV_HWDEP_IFACE_OPL4;
503 break;
504 }
505
506 /* operators - only ioctl */
507 hw->ops.open = snd_opl3_open;
508 hw->ops.ioctl = snd_opl3_ioctl;
509 hw->ops.write = snd_opl3_write;
510 hw->ops.release = snd_opl3_release;
511
512 opl3->hwdep = hw;
513 opl3->seq_dev_num = seq_device;
514 #if IS_ENABLED(CONFIG_SND_SEQUENCER)
515 if (snd_seq_device_new(card, seq_device, SNDRV_SEQ_DEV_ID_OPL3,
516 sizeof(struct snd_opl3 *), &opl3->seq_dev) >= 0) {
517 strcpy(opl3->seq_dev->name, hw->name);
518 *(struct snd_opl3 **)SNDRV_SEQ_DEVICE_ARGPTR(opl3->seq_dev) = opl3;
519 }
520 #endif
521 if (rhwdep)
522 *rhwdep = hw;
523 return 0;
524 }
525
526 EXPORT_SYMBOL(snd_opl3_hwdep_new);
527