Lines Matching full:count

20 		Count mode for channel Y. Four count modes are available:
22 		for channel Y is used by the count mode where required.
31 			counter freezes at count = preset when counting up, and
32 			at count = 0 when counting down. At either of these
33 			limits, the counting is resumed only when the count
37 			Counter is disabled whenever a 24-bit count overflow or
39 			new count value is loaded to the counter via a preset
43 			A count boundary is set between 0 and the preset value.
44 			The counter is reset to 0 at count = preset when
46 			value at count = 0 when counting down; the counter does
57 		present at the channel Y count inputs in quadrature clock mode;
67 		count for channel Y is provided by this attribute.
84 			input serves as the count input and B as the UP/DOWN
85 			direction control input, with B = 1 selecting UP Count
86 			mode and B = 0 selecting Down Count mode.
99 		when channel Y index input is active, or continuously count.