Lines Matching full:feature

50 multi-level help structure in the tool. For example, to get help for the feature "perf-profile"::
73  Intel(R) SST-PP (feature perf-profile) is supported
75  Intel(R) SST-TF (feature turbo-freq) is supported
76  Intel(R) SST-BF (feature base-freq) is not supported
77  Intel(R) SST-CP (feature core-power) is supported
82 This feature allows configuration of a server dynamically based on workload
85 Technology - Performance Profile (Intel(R) SST-PP) feature introduces a mechanism
90 a change in the base frequency dynamically. This feature is called
287 This means that at performance level 4, the "speed-select-base-freq" feature is
288 not supported. However, at performance level 0, this feature is "supported", but
289 currently "disabled", meaning the user has not activated this feature. Whereas
295 The platform firmware enables this feature when Intel(R) SST-BF or Intel(R) SST-TF
315 To use CLOS based prioritization feature, firmware must be informed to enable
365 info" command can be used. For example to check the status of core-power feature
512 feature must be disabled first.
517 The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
519 constant high guaranteed performance, then this feature can be used to execute
522 This feature does not require offline of the low priority CPUs.
529 feature.
624 feature is selected, the low priorities CPUs (which are not in
627 SST-BF feature particularly for the above "sched pipe" workload since only two
634 To enable Intel(R) SST-BF feature, execute::
662 - Enable CLOS using core-power feature set
701 To disable the Intel(R) SST-BF feature, execute::
709 This feature enables the ability to set different "All core turbo ratio limits"
710 to cores based on the priority. By using this feature, some cores can be
714 For this reason, this feature is only useful when system is busy utilizing all
723 select the desired performance level to enable this feature.
741 To check if performance can be improved using Intel(R) SST-TF feature, get the turbo
817 13, first check the capability of the Intel(R) SST-TF feature for this performance
886 feature and also sets the CPUs to high and low priority using Intel Speed
895 - Enable CLOS using core-power feature set - Configure CLOS parameters