Lines Matching full:idle

1 QCOM Idle States for cpuidle driver
3 ARM provides idle-state node to define the cpuidle states, as defined in [1].
4 cpuidle-qcom is the cpuidle driver for Qualcomm SoCs and uses these idle
5 states. Idle states have different enter/exit latency and residency values.
6 The idle states supported by the QCOM SoC are defined as -
18 hierarchy to enter standby states, when all cpus are idle. An interrupt brings
34 between the time it enters idle and the next known wake up. SPC mode is used
37 sequence for this idle state is programmed to power down the supply to the
58 The idle-state for QCOM SoCs are distinguished by the compatible property of
59 the idle-states device node.
61 The devicetree representation of the idle state should be -
66 			"qcom,idle-state-ret",
67 			"qcom,idle-state-spc",
68 			"qcom,idle-state-pc",
69 		and "arm,idle-state".
75 	idle-states {
77 			compatible = "qcom,idle-state-spc", "arm,idle-state";
84 [1]. Documentation/devicetree/bindings/arm/idle-states.yaml