Lines Matching full:sink
74 - sink
83 - sink
110 sink-pdos:
111 description: An array of u32 with each entry providing supported power sink
114 Sink Capabilities Message, the order of each entry(PDO) should follow the
115 PD spec chapter 6.4.1. Required for power sink and power dual role. User
116 can specify the sink PDO array via PDO_FIXED/BATT/VAR/PPS_APDO() defined
122 sink-vdos:
134 sink-vdos-v1:
145 op-sink-microwatt:
146 description: Sink required operating power in microwatt, if source can't
147 offer the power, Capability Mismatch is set. Required for power sink and
175 is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
178 provides a detailed description of the field. The sink PDO from current source
180 requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
182 new sink's, requirement during frswap before enabling the frs signal reception.
183 This property refers to maximum current capability that the current sink can
186 "1" refers to default USB power level as described by "Table 6-14 Fixed Supply PDO - Sink".
194 still comply to pSnkStby i.e Maximum power that can be consumed by sink while in Sink Standby
195 state as defined in 7.4.2 Sink Electrical Parameters of USB Power Delivery Specification
203 sink-vdos-v1: [ 'sink-vdos' ]
204 sink-vdos: [ 'sink-vdos-v1' ]
289 try-power-role = "sink";
291 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
293 op-sink-microwatt = <10000000>;