Lines Matching +full:waking +full:- +full:up

5 the definition of the PHY node in booting-without-of.txt for an example
9   - reg : Offset and length of the register set for the device, and optionally
14   - compatible : Should define the compatible device type for the
16 	- "fsl,gianfar-tbi"
17 	- "fsl,gianfar-mdio"
18 	- "fsl,etsec2-tbi"
19 	- "fsl,etsec2-mdio"
20 	- "fsl,ucc-mdio"
21 	- "fsl,fman-mdio"
23 	- "gianfar"
24 	- "ucc_geth_phy"
30 		compatible = "fsl,gianfar-mdio";
32 		ethernet-phy@0 {
41 similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
46 * Gianfar-compatible ethernet nodes
50   - device_type : Should be "network"
51   - model : Model of the device.  Can be "TSEC", "eTSEC", or "FEC"
52   - compatible : Should be "gianfar"
53   - reg : Offset and length of the register set for the device
54   - interrupts : For FEC devices, the first interrupt is the device's
57   - phy-handle : See ethernet.txt file in the same directory.
58   - fixed-link : See fixed-link.txt in the same directory.
59   - phy-connection-type : See ethernet.txt file in the same directory.
61     "rgmii-id", as all other connection types are detected by hardware.
62   - fsl,magic-packet : If present, indicates that the hardware supports
63     waking up via magic packet.
64   - fsl,wake-on-filer : If present, indicates that the hardware supports
65     waking up by Filer General Purpose Interrupt (FGPI) asserted on the
67     certain packet types (user) defined by filer rules to wake up the system.
68   - bd-stash : If present, indicates that the hardware supports stashing
70   - rx-stash-len : Denotes the number of bytes of a received buffer to stash
72   - rx-stash-idx : Denotes the index of the first byte from the received
81 		local-mac-address = [ 00 E0 0C 00 73 00 ];
83 		interrupt-parent = <&mpic>;
84 		phy-handle = <&phy0>
89 Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt