Lines Matching full:phy

5 $id: "http://devicetree.org/schemas/phy/qcom,qusb2-phy.yaml#"
8 title: Qualcomm QUSB2 phy controller
21               - qcom,ipq8074-qusb2-phy
22               - qcom,msm8996-qusb2-phy
23               - qcom,msm8998-qusb2-phy
26               - qcom,sc7180-qusb2-phy
27               - qcom,sdm845-qusb2-phy
28           - const: qcom,qusb2-v2-phy
32   "#phy-cells":
39       - description: phy config clock
41       - description: phy interface clock (Optional)
53       Phandle to 1.8V regulator supply to PHY refclk pll block.
55   vdda-phy-dpdm-supply:
62       Phandle to reset to phy block.
68       tuning parameter value for qusb2 phy.
79         const: qcom,qusb2-v2-phy
85         added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY
94         It is a 6 bit value that specifies bias-ctrl-value. It is a PHY
103         It is a 2 bit value that specifies charge-ctrl-value. It is a PHY
115         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
125         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
136         See dt-bindings/phy/phy-qcom-qusb2.h for applicable values.
154   - "#phy-cells"
158   - vdda-phy-dpdm-supply
166     hsusb_phy: phy@7411000 {
167         compatible = "qcom,msm8996-qusb2-phy";
169         #phy-cells = <0>;
176         vdda-phy-dpdm-supply = <&pm8994_l24>;