Lines Matching full:bank
48 nodes of the controller node. Bank name is taken from name of the node. Each
49 bank node must contain following properties:
51 - gpio-controller: identifies the node as a gpio controller and pin bank.
81 an example, the pins in GPA0 bank of the pin controller can be represented
84 "[pin bank name]-[pin number within the bank]".
93 function selector register of the pin-bank.
130 In addition, following properties must be present in node of every bank
170 In addition, following properties must be present in node of every bank
184 Node of every bank of pins supporting direct wake-up interrupts (without
188 wakeup interrupts from pins of the bank, must contain interrupts for all
189 pins of the bank.
217 /* Pin bank without external interrupts */
225 /* Pin bank with external GPIO or muxed wake-up interrupts */
236 /* Pin bank with external direct wake-up interrupts */