Lines Matching full:child
47 - Pin banks as child nodes: Pin banks of the controller are represented by child
66 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
68 as child nodes of the pin-controller node. There should be at least one
69 child node and there is no limit on the count of these child nodes. It is
70 also possible for a child node to consist of several further child nodes
72 level child nodes is exactly the same as for first level ones and is
75 The child node should contain a list of pin(s) on which a particular pin
87 child node is specified using the "samsung,pin-function" property. The value
90 for the specified pin group. This property is optional in the child node if
91 no specific function selection is desired for the pins listed in the child
95 The child node can also optionally specify one or more of the pin
97 "samsung,pins" property of the child node. The following pin configuration
110 Note: A child should include at least a pin function selection property or
145 child node representing the external wakeup interrupt controller should be
149 child node (in other words, only one External Wakeup Interrupts
152 This child node should include following properties: