Lines Matching full:processor

13   The OMAP family of SoCs usually have one or more slave processor sub-systems
14   that are used to offload some of the processor-intensive tasks, or to manage
17   The processor cores in the sub-system are usually behind an IOMMU, and may
21   The OMAP SoCs usually have a DSP processor sub-system and/or an IPU processor
22   sub-system. The DSP processor sub-system can contain any of the TI's C64x,
23   C66x or C67x family of DSP cores as the main execution unit. The IPU processor
27   Each remote processor sub-system is represented as a single DT node. Each node
29   the host processor (MPU) to perform the device management of the remote
30   processor and to communicate with the remote processor. The various properties
54       for this remote processor to access any external RAM memory or
58       sub-modules within the processor sub-system (eg: DRA7 DSPs),
66       communication with the remote processor. The specifier format is
74       Main functional clock for the remote processor
78       Reset handles for the remote processor
82       Default name of the firmware to load to the remote processor.
88 # remote processor. The conditions are mentioned for each property.
145       processor sub-system is running in SMP mode, or one per
146       core in the processor sub-system. This can also be used
159       serve as Watchdog timers for the processor cores. This
160       will usually be one per executing processor core, even
161       if the processor sub-system is running a SMP OS.