Lines Matching +full:reset +full:- +full:active +full:- +full:low
4 signals that can be wired up to GPIOs: reset (strongly recommended), and
9 - compatible: should be one of the following:
10 - "ti,tas5707"
11 - "ti,tas5711",
12 - "ti,tas5717",
13 - "ti,tas5719",
14 - "ti,tas5721"
15 - reg: The I2C address of the device
16 - #sound-dai-cells: must be equal to 0
20 - reset-gpios: GPIO specifier for the TAS571x's active low reset line
21 - pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line
22 - clocks: clock phandle for the MCLK input
23 - clock-names: should be "mclk"
24 - AVDD-supply: regulator phandle for the AVDD supply (all chips)
25 - DVDD-supply: regulator phandle for the DVDD supply (all chips)
26 - HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719)
27 - PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719)
28 - PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719)
29 - PVDD_A-supply: regulator phandle for the PVDD_A supply (5711)
30 - PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
31 - PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
32 - PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)
33 - DRVDD-supply: regulator phandle for the DRVDD supply (5721)
34 - PVDD-supply: regulator phandle for the PVDD supply (5721)
38 tas5717: audio-codec@2a {
41 #sound-dai-cells = <0>;
43 reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
44 pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
47 clock-names = "mclk";