Lines Matching full:output

114       When set the device will set the Tx ASI output to a Hi-Z state for unused
115       data cycles. Default is to drive the output low on unused ASI cycles.
121        Defines the configuration and output driver for the general purpose
122        output pins (GPO).  These values are pairs, the first value is for the
123        configuration type and the second value is for the output drive type.
126        GPO output configuration can be one of the following:
129        1 - GPOX is configured as a general-purpose output (GPO)
130        2 - GPOX is configured as a device interrupt output (IRQ)
131        3 - GPOX is configured as a secondary ASI output (SDOUT2)
132        4 - GPOX is configured as a PDM clock output (PDMCLK)
134        GPO output drive configuration for the GPO pins can be one of the following:
136        0d - (default) Hi-Z output
145        Defines the configuration and output drive for the General Purpose
146        Input and Output pin (GPIO1). Its value is a pair, the first value is for
147        the configuration type and the second value is for the output drive
152        1 - GPIO1 is configured as a general-purpose output (GPO)
153        2 - (default) GPIO1 is configured as a device interrupt output (IRQ)
154        3 - GPIO1 is configured as a secondary ASI output (SDOUT2)
155        4 - GPIO1 is configured as a PDM clock output (PDMCLK)
170        output drive type for the GPIO pin can be one of the following:
171        0 - Hi-Z output