Lines Matching full:if

30     connected to.  This is optional, if it is not connected then none
33     and may provide interrupt services to other devices if they have an
44   - wlf,gpio-cfg : A list of GPIO configuration register values. If absent,
45     no configuration of these registers is performed. If any value is
46     over 0xffff then the register will be left as default. If present 11
50     WM8958.  If absent the register defaults will be used.
55   - wlf,lineout1-se : If present LINEOUT1 is in single ended mode.
56   - wlf,lineout2-se : If present LINEOUT2 is in single ended mode.
58   - wlf,lineout1-feedback : If present LINEOUT1 has common mode feedback
60   - wlf,lineout2-feedback : If present LINEOUT2 has common mode feedback
63   - wlf,ldoena-always-driven : If present LDOENA is always driven.
65   - wlf,spkmode-pu : If present enable the internal pull-up resistor on
68   - wlf,csnaddr-pd : If present enable the internal pull-down resistor on