Lines Matching +full:timeout +full:- +full:sec
3 ** at91sam9-wdt
6 - compatible: must be "atmel,at91sam9260-wdt".
7 - reg: physical base address of the controller and length of memory mapped
9 - clocks: phandle to input clock.
12 - timeout-sec: contains the watchdog timeout in seconds.
13 - interrupts : Should contain WDT interrupt.
14 - atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in
17 - atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in
18 seconds. This value must be smaller than the max-heartbeat-sec value.
20 - atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog
23 - atmel,reset-type : Should be "proc" or "all".
27 - atmel,disable : Should be present if you want to disable the watchdog.
28 - atmel,idle-halt : Should be present if you want to stop the watchdog when
35 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
40 compatible = "atmel,at91sam9260-wdt";
44 timeout-sec = <15>;
45 atmel,watchdog-type = "hardware";
46 atmel,reset-type = "all";
47 atmel,dbg-halt;
48 atmel,idle-halt;
49 atmel,max-heartbeat-sec = <16>;
50 atmel,min-heartbeat-sec = <0>;