Lines Matching +full:0 +full:x480
31 pass to the kernel this command line: "video=matroxfb:vesa:0x1BB".
35 unless you have primary display on non-Matrox VBE2.0 device (see
46 bpp 640x400 640x480 768x576 800x600 960x720
48 4 0x12 0x102
49 8 0x100 0x101 0x180 0x103 0x188
50 15 0x110 0x181 0x113 0x189
51 16 0x111 0x182 0x114 0x18A
52 24 0x1B2 0x184 0x1B5 0x18C
53 32 0x112 0x183 0x115 0x18B
63 4 0x104 0x106
64 8 0x105 0x190 0x107 0x198 0x11C
65 15 0x116 0x191 0x119 0x199 0x11D
66 16 0x117 0x192 0x11A 0x19A 0x11E
67 24 0x1B8 0x194 0x1BB 0x19C 0x1BF
68 32 0x118 0x193 0x11B 0x19B
76 text 640x400 640x480 1056x344 1056x400 1056x480
78 8x8 0x1C0 0x108 0x10A 0x10B 0x10C
79 8x16 2, 3, 7 0x109
82 You can enter these number either hexadecimal (leading `0x`) or decimal
83 (0x100 = 256). You can also use value + 512 to achieve compatibility
87 example 1600x1200x32bpp can be specified by `video=matroxfb:vesa:0x11C,depth:32`.
110 2,3,7,0x108-0x10C or 0x1C0. At runtime, `fbset -depth 0` does this work.
165 - 0 -> 2x128Kx32 chips, 2MB onboard, probably sgram
174 - 0 -> 2x512Kx16 SDRAM, 16/32MB
203 dev:X bind driver to device X. Driver numbers device from 0 up to N,
204 where device 0 is first `known` device found, 1 second and so on.
235 0 to 0xFF, and meaning of each individual bit is described in
236 G400 manual, in description of DAC register 0x1F. For normal
243 of 0 (for no CRTC), 1 (CRTC1) or 2 (CRTC2), and first letter
250 vesa:X selects startup videomode. X is number from 0 to 0x1FF, see table
279 sync:X sync. pulse - bit 0 inverts HSYNC polarity, bit 1 VSYNC polarity.
280 If bit 3 (value 0x08) is set, composite sync instead of HSYNC is
281 generated. If bit 5 (value 0x20) is set, sync on green is turned
285 depth:X Bits per pixel: 0=text, 4,8,15,16,24 or 32. Default depends on
415 + secondary head always powerups in 640x480@60-32 videomode. You have to use
434 + secondary head always powerups in 640x480@60-32 videomode. You have to use