Lines Matching +full:current +full:- +full:limit

16 	- Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing
17 	- Justin Thiessen <jthiessen@penguincomputing.com>
20 -----------------
23     List of GPIO pins (0-16) to program as inputs
26     List of GPIO pins (0-16) to program as outputs
29     List of GPIO pins (0-16) to program as inverted
32     List of GPIO pins (0-16) to program as normal/non-inverted
35     List of GPIO pins (0-7) to program as fan tachs
39 -----------
45 16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit),
46 an analog output and a PWM output along with limit, alarm and mask bits for
51 limit. If the limit is exceeded, an interrupt (#SMBALERT) can be
52 generated. The interrupts can be masked. In addition, there are over-temp
53 limits for each sensor. If this limit is exceeded, the #THERM output will
54 be asserted. The current temperature and limits have a resolution of 1
58 in counts of a 22.5kHz internal clock. Each fan has a high limit which
59 corresponds to a minimum fan speed. If the limit is exceeded, an interrupt
66 crossed a programmable minimum or maximum limit. Note that minimum in this
69 higher voltages directly. 3.3V, 5V, 12V, -12V and battery voltage all have
70 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
72 a 0-2.5V full-scale range. A 2.5V or 1.82V reference voltage is provided
77 have disappeared! Note that in the current implementation, all hardware
80 once-only alarms.
90 register. Then set the low temperature limit in the tmin values for each
92 largest difference between current and tmin of the temperature sensors sets